Production of particleboards with bamboo (Dendrocalamus giganteus) reinforcement

The focus of this research was to study the utilization of residues from bamboo (Dendrocalamus giganteus) lamination in the manufacturing of panels for structural purposes. Bamboo particleboards were produced under three conditions: pure boards, reinforced with bamboo laminas, and with treated particles. Castor oil-based polyurethane was the resin binder, in view of using lower toxicity materials. The mechanical tests were performed according to Brazilian Standard (NBR) 14810-3 (2006) and European Standard (EN) 310 (2000). The results were superior to those recommended by these and other standards for internal adhesion resistance, modulus of rupture, and elasticity in static bending, as well as to the results of other studies. Starch treatment was an unnecessary stage. According to the conditions of this process, the studied panels showed a good potential for construction use. Moreover, the bamboo particleboards are an economically viable, environmentally friendly, and sustainable alternative for the use of waste generated during the processing of Dendrocalamus giganteus bamboo species, allied with castor oil-based polyurethane resin. The reinforced particleboard and its production process are being licensed as an Innovation Patent in Brazil, (BR 1020130133919-1-2013).

Apoptose no carcinoma de próstata

Pós-graduação em Patologia - FMB

Avaliação de falhas na brotação da cana-de-açúcar em função da disponibilidade hídrica

The sugarcane is a crop of annual cycle, where its large water demand is not always full, causing stand gaps in the sprouting of ratoons. Thus, this study aimed to assess the stand gaps in the first and second ratoon sugarcane under seven levels of water deficit. The experiment was conducted in the Center of Agricultural Sciences of the Federal University of Alagoas in the period of 22 February 2010 to 20 February 2012. The stand gaps depending on water depths ranged from 11.2 (25% ETo) to 16.8% (100% ETo) in the first ratoon and from 24.8 (0% ETo) to 32.8% (100% ETo) on second ratoon. The average size of stand gaps ranged from 0.60 to 0.68 m in the first ratoon and from 0.70 to 0.74 m on second ratoon. The average distance to find a stand gap ranged from 16.8 to 29.5 m in the first ratoon and from 6.5 to 10.9 m in the second ratoon. The percentage of gaps and the average size of the gaps in the sprouting of ratoon increase with the age of the sugarcane plantation and the average distance between gaps decreases. The use of irrigation in the culture of sugarcane increase the percentage of gaps, but because these spaces are filled with culms of other sugarcane clumps and were irrigated with larger water depths, the agricultural productivity of the culture increases. The depths of irrigation decreases the average distance between gaps with more intensity in the first than in the second ratoon.

Permian stromatolites associated with bivalve coquina beds-Angatuba, SP, Brazil (Teresina Formation, Parana Basin)

Silicified stromatolites have been described in the Permian Teresina Formation, Passa Dois Group, of the Parana Basin. These stromatolites occur as blocks in the Fazenda Monte Alegre area at the headwaters of the creek known as Corrego Catanduva in the municipality of Angatuba. These blocks originate from the Serra de Angatuba region and were recognized in a road that was cut in the midst of sandstones and siltites. The stromatolites are isolated bioherms that are domed to subspherical with a flat base in profile and a rounded to lenticular shape in plan view. The stromatolites exhibit a reddish coloration and are composed of microcrystalline quartz. Lamination is continuous, non-columnar, and anastomosed, showing parallel to divergent growth; however, divergent columns also occur, especially at the tops of the bioherms. The lamination is fine and well preserved, with alternating light and dark laminas. Microfossils of filamentous cyanobacteria are preserved and were related to the genera Microcoleus and Rivularia. Silicified bivalves occur in association with the stromatolites and are preserved in the form of coquina beds and rare isolated specimens within the bioherms. The described specimens belong to the Pinzonella illusa biozone, with representatives of the species Pinzonella illusa, Angatubia cowperesioides, and Houldausiella elongata. The formation environment of these stromatolites is associated with tidal plains of shallow, brackish, relatively calm, warm waters of good luminosity with the presence of weak currents. There was likely a low level of predation, and the environment may have been hypersaline. The coquina beds associated with the stromatolites indicate a probable proximal tempestite, i.e., they were formed near the coastline. The stromatolites were originally composed of carbonates, although these were replaced by silica during early diagenesis.

TOMOGRAPHIC ANALYSIS OF ANATOMICAL PARAMETERS OF THE AXIS IN CHILDREN

Objective: To carry out an anatomical study of the axis with the use of computed tomography (CT) in children aged from two to ten years, measuring the lamina angle, lamina and pedicle length and thickness, and lateral mass length. Methods: Sixty-four CTs were studied from patients aged 24 to 120 months old, of both sexes and without any cervical anomaly. The measurements obtained were correlated with the data on age and sex of the patients. Statistical analysis was performed using the Students "t" tests. Results: We found that within the age range 24-48 months, 5.5% of the lamina and 8.3% of the pedicles had thicknesses of less than 3.5mm, which is the minimum thickness needed for insertion of the screw. Between 49 and 120 months, there were no lamina thicknesses of less than 3.5mm, and 1.2% of the pedicle thicknesses were less than 3.5mm values. Neither of the age groups had any lamina and pedicle lengths of less than 12mm, or lateral mass lengths greater than 12mm. Conclusion: The analysis of the data obtained demonstrates that most of the time, is possible to use a 3.5mm pedicle screw in the laminas and pedicles of the axis in children. Level of Evidence: II, Development of diagnostic criteria in consecutive patients.

Long-distance transport of alkali metals in maturing wheat

The alkali metals cesium, rubidium, lithium and sodium were introduced together with strontium via flaps into leaf laminas or into the stem of maturing, intact winter wheat (Triticum aestivum L. cv. Arina) grown in a field. Long-distance transport of these elements and the influence of the application date and of different application positions were investigated. The phloem-immobile Sr served as a marker for the distribution of the xylem sap in the plants. Dry matter accumulation in the grains and the transpiration per shoot were not markedly affected by the treatments as compared to control plants. The phloem mobility was rather high for Cs and Rb. Li was almost immobile in the phloem (similarly to Sr). An application into the cut stem xylem below the second leaf node contributed more to the contents in the grains than an application into the flag leaf. An earlier feeding date led to a higher accumulation in the grains. The marked losses of the elements applied during maturation (most pronounced for Li) can be explained by leakage in the rain.

Long-distance transport of cobalt and nickel in maturing wheat

Cobalt, nickel and strontium were introduced via flaps into leaf laminas or into the stem of maturing, intact winter wheat (Triticum aestivum L., cv. `Arina') grown under natural conditions in a field. Long-distance transport of these elements and the influence of the application date and of different application positions were investigated. The dry-matter accumulation in the grains was not markedly affected by the treatments as compared to untreated control plants. The phloem-immobile strontium served as a marker for the distribution of the xylem sap in the plants. After foliar application, nickel accumulated more rapidly and in higher quantities in the grains than cobalt. Therefore, nickel has a slightly better phloem mobility than cobalt. Regardless of the application date, a higher percentage of the two elements was transported from the flag leaf lamina than from the second or third lamina from the top to the grains. These results indicate that the leaf position is highly relevant for the transfer of the heavy metals investigated to the ear. Introduction into the stem led to a higher accumulation of nickel and cobalt in the grains than introduction into one of the leaves. An earlier feeding date caused a higher accumulation of nickel and cobalt in the grains when introduced into the stem. In contrast, no major differences between earlier and later feeding dates were detected when the elements were introduced into the leaves. Losses of the applied elements were detected during maturation and can be explained by leakage in the rain.

Análisis de la durabilidad de la cubierta plana invertida, a través del estudio de las interacciones e incompatibilidades entre las membranas sintéticas y el poliestireno extrusionado

La cubierta plana invertida se forma, cuando sobre una membrana impermeable se coloca un aislamiento térmico. Estos materiales pueden separarse con capas auxiliares que impiden el contacto directo entre ellos. Muchos de los materiales que forman esta solución constructiva pueden ser polímeros, como lo son algunas membranas impermeables, las capas auxiliares separadoras o el poliestireno extrusionado (XPS). La mayoría de los polímeros son incompatibles entre sí, por lo que en esta tesis se plantea como hipótesis la posibilidad de que se produzcan interacciones e incompatibilidades entre algunos de estos materiales. Por ello se hace una búsqueda bibliográfica y documental de otras investigaciones que pudieran estar relacionadas con el tema, y se estudian y analizan normas y documentación facilitada por fabricantes. Sin embargo, tras consultar toda la bibliografía y documentación que se referencia en esta tesis doctoral, no fue encontrado ningún trabajo de investigación sobre la influencia de la interacción entre los materiales que componen las cubiertas planas invertidas, y de cómo afecta esta a la durabilidad de las mismas. El propósito de esta tesis es el análisis de la durabilidad de la cubierta plana invertida, desde el punto de vista de las interacciones e incompatibilidades que pueden producirse entre los materiales formantes de esta solución constructiva. Además de este objetivo general, se estudian alternativas que puedan prolongar el ciclo de vida de la cubierta plana invertida. Para ello, se desarrolla un plan experimental con el fin de analizar dichas incompatibilidades, y estudiar los factores que las condicionan. Algunos de los resultados obtenidos, muestran que determinadas láminas impermeables utilizadas normalmente para la construcción de cubiertas planas, pueden interactuar con el XPS y sufrir deterioro. El contacto con el mismo, la incorrecta separación, la presión y el calor, son factores determinantes para que se produzca deterioro. Se puede señalar como una de las conclusiones de esta investigación, que la protección térmica que proporciona el XPS a la cubierta plana invertida, puede no ser suficiente (dependiendo del espesor del mismo, y de la ubicación de la cubierta fundamentalmente), para reducir la cantidad de calor que alcanza la línea de contacto entre los materiales, y por tanto paliar las interacciones que se producen. Además, aunque los geotextiles utilizados como capas auxiliares separadoras, en los gramajes por metro cuadrado, recomendados por algunas de las normas reguladoras de este tipo de cubiertas minoran las interacciones, estas siguen produciéndose. ABSTRACT The inverted flat roof is formed from a waterproofing membrane on which the thermal insulation is placed. These materials may be separated with auxiliary layers, which prevent the direct contact between them. Many of the materials forming this constructive solution can be polymers, such as some waterproofing membranes, the auxiliary separating layers, or the extruded polystyrene board (XPS). Most polymers are incompatible, so this thesis hypothesized that interactions and incompatibilities between some of these materials might be possible. Therefore, a literature search, and other documentation that could be related to the topic, are studied and analyzed, as well as, standards and documentation provided by manufacturers. However, after consulting all literature and documents referenced in this dissertation, it was not found any research about the influence of interaction between the materials forming the inverted flat roof, and how this affects to the durability of them. The purpose of this thesis is the analysis of the durability of the inverted flat roof, from the point of view of interactions and incompatibilities may occur between the materials setting up this constructive solution. Along with this general objective, alternatives that can prolong the life cycle of the inverted roof are studied. To get this, an experimental plan is developed, in order to analyze these incompatibilities, and study the factors conditioning them. Some of the results show, that certain normally used waterproofing laminas for building flat roofs, may interact with XPS producing lamina deterioration. Contact, incorrect separation, pressure and heat, are determinant factors for degradation. It can be pointed out, as one of the conclusions of this research, that the thermal protection provided by XPS to the inverted flat roof, cannot be enough (depending on the XPS thickness, and the location of the flat mainly) to reduce the amount of heat that reaches the contact line between materials, and thus to cut down interactions. Furthermore, although geotextiles used as auxiliary separating layers, within the weights per square meter recommended by some of the regulating rules of this type of roofs reduce interactions, these still occur.

Linear instability analysis of incompressible flow over a cuboid cavity

Direct numerical simulations are performed to analyze the three-dimensional instability of flows over three-dimensional cavities. The flow structures at different Reynolds numbers are investigated by using the spectral-element solver nek5000. As the Reynolds number increasing, the lateral wall effects become more important, the recirculation zone shrinks, the front vortex increases and the flow structure inside of the cavity becomes more complex. Results show that the flow bifurcates from a steady state to an oscillatory regime beyond a value of Reynolds number Re = 1100.

Reflexiones sobre la verdadera arte de escribir [Texto impreso]

Tít. tomo segundo: Laminas de las Reflexiones sobre el arte de escribir

Recueil des monumens des catastrophes que le globe terrestre a e?suieés, contenant des pe´trifications dessineés, graveés et enlumineés d'apres ?les originaux /

Mode of access: Internet.

[Lichenum historia]

Mode of access: Internet.

Coleccion general de maquinas : escogidas entre las que hasta hoy se han dado á luz en Inglaterra, Francia, Italia, y otras partes, y en que se comprehenden los utensilios y demás maquinas que se han inventado para facilitar las operaciones de los artes, y oficios, segun los publica la Real Academia de las Ciencia de París : tomo primero.

Mode of access: Internet.

Historia de la conquista de México, con una ojeada preliminar sobre la antigua civilizacion de los Mexicanos, y con la vida de su conquistador, Fernando Cortes.

Notas y esclarecimientos a la Historia de la conquista, por José F. Ramirez (xx, 124 p. at end of v. 2)

El Ingenioso hidalgo Don Quijote de la Mancha /

"Adornada con 300 grabados intercalados, laminas suelta [s] y el retrato del autor grabado en acero."