Characterization of Fly Ash for Use in Concrete, HR-225, 1983

Recent construction of new generation power plants burning western coal within Iowa has resulted in fly Ash production on the order of 760,000 tons annually. Although fly ash has long been accepted as a valuable replacement for portland cement in concrete, most experience has been with fly ash generated from eastern bituminous coals. A few years ago, fly ash in Iowa was not a significant factor because production was small and economics dictated disposal as the better alternative than construction use. Today, the economic climate, coupled with abundance of the material, makes constructive use in concrete feasible. The problem is, however, fly ash produced from new power plants is different than that for which information was available. It seems fly ash types have outgrown existing standards. The objective of this study was to develop fundamental information about fly ashes available to construction in Iowa such that its advantages and limitations as replacement to portland cement can be defined. Evaluative techniques used in this work involve sophisticated laboratory equipment, not readily available to potential fly ash users, so a second goal was preliminary development of rapid diagnostic tests founded on fundamental information. Lastly, Iowa Department of Transportation research indicated an interesting interdependency among coarse aggregate type, fly ash and concrete's resistance to freeze-thaw action. Thus a third charge of this research project was to verify and determine the cause for the phenomena. One objective of this project was to determine properties of Iowa fly ashes and evaluate their relevance to use of the material as an admixture of PCC. This phase of the research involved two approaches. The first involved the development of a rapid method for determining quantitative elemental composition while the second was aimed at both qualitative and quantitative determination of compounds. X-ray fluorescence techniques were adapted for rapid determination of elemental composition of fly ash. The analysis was performed using a Siemens SR-200 sequential x-ray spectrometer controlled by a PDP-11-03 microcomputer. The spectrometer was equipped with a ten sample specimen chamber and four interchangeable analyzing crystals. Unfiltered excitation radiation was generated using a chromium tube at 50 KV and 48 ma. Programs for the spectrometer were developed by the Siemens Corporation.

Innovative Solutions for Slope Stability Reinforcement and Characterization: Vol. I, TR-489, 2005

Soil slope instability concerning highway infrastructure is an ongoing problem in Iowa, as slope failures endanger public safety and continue to result in costly repair work. Characterization of slope failures is complicated, because the factors affecting slope stability can be difficult to discern and measure, particularly soil shear strength parameters. While in the past extensive research has been conducted on slope stability investigations and analysis, this research consists of field investigations addressing both the characterization and reinforcement of such slope failures. The current research focuses on applying an infrequently-used testing technique comprised of the Borehole Shear Test (BST). This in-situ test rapidly provides effective (i.e., drained) shear strength parameter values of soil. Using the BST device, fifteen Iowa slopes (fourteen failures and one proposed slope) were investigated and documented. Particular attention was paid to highly weathered shale and glacial till soil deposits, which have both been associated with slope failures in the southern Iowa drift region. Conventional laboratory tests including direct shear tests, triaxial compression tests, and ring shear tests were also performed on undisturbed and reconstituted soil samples to supplement BST results. The shear strength measurements were incorporated into complete evaluations of slope stability using both limit equilibrium and probabilistic analyses. The research methods and findings of these investigations are summarized in Volume 1 of this report. Research details of the independent characterization and reinforcement investigations are provided in Volumes 2 and 3, respectively. Combined, the field investigations offer guidance on identifying the factors that affect slope stability at a particular location and also on designing slope reinforcement using pile elements for cases where remedial measures are necessary. The research findings are expected to benefit civil and geotechnical engineers of government transportation agencies, consultants, and contractors dealing with slope stability, slope remediation, and geotechnical testing in Iowa.

Innovative Solutions for Slope Stability Reinforcement and Characterization: Vol. II, TR-489, 2005

Soil slope instability concerning highway infrastructure is an ongoing problem in Iowa, as slope failures endanger public safety and continue to result in costly repair work. While in the past extensive research has been conducted on slope stability investigations and analysis, this current research study consists of field investigations addressing both the characterization and reinforcement of such slope failures. While Volume I summarizes the research methods and findings of this study, Volume II provides procedural details for incorporating an infrequently-used testing technique, borehole shear tests, into practice. Fifteen slopes along Iowa highways were investigated, including thirteen slides (failed slopes), one unfailed slope, and one proposed embankment slope (the Sugar Creek Project). The slopes are mainly comprised of either clay shale or glacial till, and are generally gentle and of small scale, with slope angle ranging from 11 deg to 23 deg and height ranging from 6 to 23 m. Extensive field investigations and laboratory tests were performed for each slope. Field investigations included survey of slope geometry, borehole drilling, soil sampling, in-situ Borehole Shear Testing (BST) and ground water table measurement. Laboratory investigations mainly comprised of ring shear tests, soil basic property tests (grain size analysis and Atterberg limits test), mineralogy analyses, soil classifications, and natural water contents and density measurements on the representative soil samples from each slope. Extensive direct shear tests and a few triaxial compression tests and unconfined compression tests were also performed on undisturbed soil samples for the Sugar Creek Project. Based on the results of field and lab investigations, slope stability analysis was performed on each of the slopes to determine the possible factors resulting in the slope failures or to evaluate the potential slope instabilities using limit equilibrium methods. Deterministic slope analyses were performed for all the slopes. Probabilistic slope analysis and sensitivity study were also performed for the slope of the Sugar Creek Project. Results indicate that while the in-situ test rapidly provides effective shear strength parameters of soils, some training may be required for effective and appropriate use of the BST. Also, it is primarily intended to test cohesive soils and can produce erroneous results in gravelly soils. Additionally, the quality of boreholes affects test results, and disturbance to borehole walls should be minimized before test performance. A final limitation of widespread borehole shear testing may be its limited availability, as only about four to six test devices are currently being used in Iowa. Based on the data gathered in the field testing, reinforcement investigations are continued in Volume III.

Structural Characterization of UHPC Waffle Bridge Deck and Connections, TR-614, 2014

The AASHTO strategic plan in 2005 for bridge engineering identified extending the service life of bridges and accelerating bridge construction as two of the grand challenges in bridge engineering. These challenges have the objective of producing safer and more economical bridges at a faster rate with a minimum service life of 75 years and reduced maintenance cost to serve the country’s infrastructure needs. Previous studies have shown that a prefabricated full-depth precast concrete deck system is an innovative technique that accelerates the rehabilitation process of a bridge deck, extending its service life with reduced user delays and community disruptions and lowering its life-cycle costs. Previous use of ultra-high performance concrete (UHPC) for bridge applications in the United States has been considered to be efficient and economical because of its superior structural characteristics and durability properties. Full-depth UHPC waffle deck panel systems have been developed over the past three years in Europe and the United States. Subsequently, a single span, 60-ft long and 33-ft wide prototype bridge with full-depth prefabricated UHPC waffle deck panels has been designed and built for a replacement bridge in Wapello County, Iowa. The structural performance characteristics and the constructability of the UHPC waffle deck system and its critical connections were studied through an experimental program at the structural laboratory of Iowa State University (ISU). Two prefabricated full-depth UHPC waffle deck (8 feet by 9 feet 9 inches by 8 inches) panels were connected to 24-ft long precast girders, and the system was tested under service, fatigue, overload, and ultimate loads. Three months after the completion of the bridge with waffle deck system, it was load tested under live loads in February 2012. The measured strain and deflection values were within the acceptable limits, validating the structural performance of the bridge deck. Based on the laboratory test results, observations, field testing of the prototype bridge, and experience gained from the sequence of construction events such as panel fabrication and casting of transverse and longitudinal joints, a prefabricated UHPC waffle deck system is found to be a viable option to achieve the goals of the AASHTO strategic plan.

Characterization of the effect of mammary gland irridiation on experimental brest cancer progression and analysis of the implicated mechanisms

SUMMARY Radiotherapy is commonly and efficiently used to treat solid cancer in the clinic. Experimental evidence however suggests that radiation can promote tumor progression by inducing chronic modifications of the tumor microenvironment. Clinically, these observations are highly relevant to aggressive tumoral lesions relapsing after radiation therapy, a leading cause of patients' death. The investigation and understanding of the biological mechanisms implicated in the malignant progression of post-radiation relapses are therefore of major importance. Here we used a syngeneic (immunocompetent) breast cancer orthotopic xenograft model, to show that local irradiation of the mammary gland promotes the appearance of an invasive and metastatic tumor phenotype. Previous studies in our laboratory revealed that inhibition of tumor-induced angiogenesis and consequent increase in tumor hypoxia promotes metastasis formation through the activation of pro-invasive programs in the tumor cells. Our results extend these observations suggesting that mammary gland irradiation induces the recruitment of CD11b+ cells to both the primary tumor and the lungs at pre-metastatic stages through the hypoxia-dependent induction of Kit-ligand (KITL) expression in primary tumors. Abrogation of KITL expression in tumor cells prevented CD11 b+ cells accumulation in both the primary tumor and lungs and significantly reduced metastases of tumors growing in irradiated mammary gland. Importantly, irradiated mammary gland enhanced tumor-induced mobilization of circulating CD11b+cKit+ myelomonocytic cells through a HIF1- and KITL-dependent process. By cell transfer experiments, mobilized circulating CD11b+cKit+ cells were shown to supply both tumor- and lungs infiltrating CD11b+ cells. Using a blocking antibody against cKit (the KITL receptor), the mobilization of CD11b+cKit+ ceils was prevented as well as lung metastases derived from tumors growing in irradiated mammary gland. Taken together, these results indicate that tumors growing in a pre-irradiated mammary gland partially promote their malignant progression through the distant mobilization of circulating myelomonocytic precursor cells. They identify KITL inhibition and/or cKit receptor neutralization as potentially promising therapeutic approaches for post-radiation relapses. RESUME La radiothérapie est largement utilisée comme traitement de choix de nombreux types de cancers. L'agressivité des récidives tumorales observée en clinique après radiothérapie suggère cependant que le recours à l'irradiation pourrait dans certains cas accélérer la progression tumorale. De récents travaux expérimentaux ont en effet permis d'appuyer cette hypothèse, en montrant notamment l'effet néfaste des modifications chroniques de l'environnement induites par l'irradiation sur la progression tumorale. A l'aide d'un modèle murin syngénique orthotopique de cancer de sein, nous avons pu montrer que l'irradiation locale de la glande mammaire facilite l'invasion et la dissémination métastatique des cellules tumorales en favorisant le recrutement de cellules myéloïdes CD11 b+ vers la tumeur primaire et les poumons à un stade pré-métastatique. Comme mécanisme impliqué dans le recrutement des cellules CD11b+, nous avons pu observer après irradiation locale de la glande mammaire une expression augmentée de Kit-ligand (KITL) dans la tumeur (induite par l'hypoxie) ainsi que la mobilisation de cellules myéloïdes circulantes exprimant le récepteur cKit et précurseurs des cellules CD11b+ infiltrant la tumeur et les poumons. En empêchant la mobilisation par la tumeur de cellules circulantes cKit+ par des approches à la fois génétique et pharmacologique nous avons pu prévenir l'accumulation de cellules myéloïdes CD11 b+ dans la tumeur primaire et les poumons ainsi que la dissémination métastatique induites par' l'irradiation de la glande mammaire. De façon générale, ces résultats montrent que la progression agressive des tumeurs qui se développent dans un environnement irradié repose à la fois sur l'expression tumorale de KITL et la mobilisation de cellules myéloïdes précurseurs cKit*. Ils auront permis d'identifier KITL et/ou cKit comme des cibles thérapeutiques potentielles intéressantes pour le traitement des récidives tumorales après radiothérapie.

Characterization and discrimination of soils by their reflected electromagnetic energy

The objective of this work was to verify if reflected energy of soils can characterize and discriminate them. A spectroradiometer (Spectral reflectance between: 400-2,500 nm) was utilized in laboratory. The soils evaluated are located in Bauru region, SP, Brazil, and are classified as Typic Argiudoll (TR), Typic Eutrorthox (LR), Typic Argiudoll (PE), Typic Haplortox (LE), Typic Paleudalf (PV) and Typic Quartzipsamment (AQ). They were characterized by their spectral reflectance as for descriptive conventional methods (Brazilian and International) according to the types of spectral curves. A method for the spectral descriptive evaluation of soils was established. It was possible to characterize and discriminate the soils by their spectral reflectance, with exception for LR and TR. The spectral differences were better identified by the general shape of spectral curves, by the intensity of band absorption and angle tendencies. These characteristics were mainly influenced by organic matter, iron, granulometry and mineralogy constituents. A reduction of iron and clay contents, which influenced higher reflectance intensity and shape variations, occurred on the soils LR/TR, PE, LE, PV and AQ, on that sequence. Soils of the same group with different clay textures could be discriminated. The conventional descriptive evaluation of spectral curves was less efficient on discriminating soils. Simulated orbital data discriminated soils mainly by bands 5 and 7.

Characterization of BMP signaling in breast development and tumorigenesis

Résumé L'influence des hormones reproductives sur le développement du cancer du sein a été établie au travers de nombreuse études épidémiologiques. Nous avons précédemment démontré que le gène Wnt-4 est un médiateur essentiel de la progestérone dans le développement lobulo-alvéolaire de l'épithélium mammaire. De plus, le rôle de la voie de signalisation Wnt dans la tumorigénèse de la glande mammaire mutine est largement établi. Pour comprendre sa fonction dans le cancer du sein, nous avons activée cette voie en surexprimant le gène Wnt-1 dans des cellules épithéliales primaires de sein, au moyen d'un rétrovirus. Ceci a conduit à la transformation oncogénique de ces cellules et à l'obtention d'un modèle de carcinogénèse du sein dénommé Wnt-1 HMEC. L'analyse de l'expression des gènes induits par la surexpression de Wnt-1 dans ces cellules, a permis d'identifier les gènes BMP4 et 7. Alors que des analyses de RT-PCR ont montré leur forte expression dans les cellules Wnt-1-HMECs, la présence d'une grande quantité de la protéine BMP7 a été constatée dans les tumeurs dérivées de ces cellules. L'importante phosphorylation des Smad 1, 5, S dans les Wnt-1 HMECs indique l'activation de la voie BMP, possiblement due à la stimulation ce celle-ci par BMP7. L'activation de la voie Wnt par la ß-Caténine, conduit à la transcription de BMP7, identifiant ainsi ce gène comme un gène cible de la voie canonique. La pertinence de nos observations a par ailleurs été confirmée par le fait que BMP7 est surexprimé dans les tumeurs de seins humains. Afin d'élucider la fonction de la voie BMP dans le sein, nous avons utilisé le modèle mutin. L'expression du gène BMP7 dans les souris transgéniques MMTV Wnt-1 s'est avérée élevée, démontrant qu'il est aussi un gène cible de la voie Wnt in-vivo. L'expression de l'ARN messager .codant pour la protéine BMP7 est induite lors du développement lobulo-alvéolaire, qui se fait sous l'influence de la progestérone et de Wnt-4. Ensemble, ces observations corroborent le fait qu'une stimulation avec de la progestérone suffit à induire la transcription du gène dans les 24h. Nos résultats coïncident d'autre part avec le fait que BMP7 est exprimé dans la couche myoépithéliale de l'épithélium où la voie Wnt est activée. L'analyse de souris reportrices de l'activité de la voie BMP, suggère une activation dans la couche luminale de l'épithélium durant tout le développement de la glande mammaire. Curieusement, cette même voie est active dans le mésenchyme lors de la mammogénèse embryonnaire. Finalement, nos analyses d'immunofluorescence démontrent la capacité de prolifération des cellules ayant activé BMP, ainsi que leur nette ségrégation d'avec les cellules exprimant le récepteur à la progestérone. Nos résultats démontrent que le gène BMP7 est un gène cible de la voie Wnt canonique dans le sein. Son expression dans la couche myoépitheliale est induite par Wnt-4, lui-même sécrété par les cellules luminales sensibles à la progestérone. La sécrétion de la protéine BMP7 conduit finalement à l'activation de la voie BMP dans les cellules négatives pour le récepteur à la progestérone. Abstract Epidemiological studies highlight the repetitive exposure to circulating progesterone as a major risk in the development of breast cancer. Work in our laboratory showed that Wnt-4 is an essential mediator of progesterone-driven side-branch formation, while Wnt signaling has long been established as strongly oncogenic in the mouse mammary gland. To address the role of Wnt in breast tumorigenesis we activated the pathway in primary human breast epithelial cells by means of refroviral Wnt-1 expression. This resulted in a Wnt1-induced breast carcinogenesis model, being referred to as Wnt-1-HMECs. Gene expression profiling revealed the Bone Morphogenetic Protein 4 and 7 (BMP4 and 7) a mong the most upregulated gene by ectopic Wnt-1 expression in primary HMECs. RT-PCR analysis confirmed elevated BMP4 and 7 mRNA levels in Wnt-1-infected HMECs, as well as strong BMP7 expression in the tumors derived from these cells. Smad 1, 5, 8 phosphorylation was high in Wnt-1HMECs whereas below detection limit in primary HMECs suggesting that the increased expression of BMP-7 results in activation of downstream signaling. Ectopic expressíon of a stabilized form of ßcatenin in primary HMECs resulted in increased transcription of BMP-7 suggesting that it is a target of canonical Wnt signaling. The clinical relevance of our observations was confirmed by the finding of BMP7 being upregulated in human breast tumor samples. To elucidate the role of BMP ligands in the breast in-vivo, we made use of the mouse model. Expression of the BMP7 gene was found to be increased in MMTV-Wnt-1 transgenic animals, suggesting that BMP7 may also be a Wnt 1 target gene in vivo. Expression of BMP7 was upregulated in mid-pregnancy which coincides with progesterone/Wnt induced side branching. BMP7 was induced within 24 hours by progesterone. Consistent with it being a target of canonical Wnt signaling, we demonstrated preferential expression of this ligand in the myoepithelial cells, the target cells of Wnt signals. In-vivo analysis of BMP signaling using a reporter mouse revealed the activation of the pathway in the luminal layer of the epithelium throughout postnatal development. Interestingly, during embryonic mammogenesis the pathway was found to be active in the mesenchyme. Immunofluorescence studies demonstrated that cells with BMP activity can proliferate. They also revealed a clear segregation between progesterone receptor positive cells and cells with active BMP signaling. Together our observations suggest that BMP-7 is a canonical Wnt signaling target both in HMECs and in the mouse mammary gland in-vivo. It is expressed in the myoepithelium possibly in response to Wnt-4, which is secreted by steroid receptor positive cells in response to progesterone. BMP-7 in turn may impinge on lumina) epithelial cells and activate BMP signaling in PR negative cells.

Characterization of membrane vesicles circulating in the serum of patients with common acute lymphoblastic leukemia.

Common acute lymphoblastic leukemia antigen detected by radioimmunoassay in the serum of patients with common acute lymphoblastic leukemia was found to be exclusively associated with the pellet of the serum samples obtained by ultracentrifugation at 100,000 X g. The pellets were shown to contain membrane vesicles or fragments which were characterized by electron microscopy and determination of enzymatic activity. The pelleted fragments had an apparent diameter ranging between 60 and 260 nm and showed a trilaminar membrane structure. On freeze-fracture preparations, the fragments with concave profile, corresponding to the external fracture face of plasma membrane, displayed an intramembrane particle density (ranging from 0 to 750 particles per micron2) which is similar to that recorded on the corresponding fracture face of intact cells from the common lymphoblastic leukemia antigen positive leukemic cell line (Nalm-1) or of vesicles shed in the culture medium by Nalm-1 cells. Furthermore, analysis of the membrane enzyme marker 5'-nucleotidase in the pellet of patient's sera, showed that the presence of this enzyme correlated with that of common lymphoblastic leukemia antigen, but the quantitative relationship between the two surface constituents was not linear. The results suggest that the two markers are located on the same membrane fragments, but that their individual distribution on the shed fragments is heterogeneous.

Characterization and management of rockslide hazard at Turtle Mountain, Alberta, Canada

In 1903, more than 30 million m3 of rock fell from the east slopes of Turtle Mountain in Alberta, Canada, causing a rock avalanche that killed about 70 people in the town of Frank. The Alberta Government, in response to continuing instabilities at the crest of the mountain, established a sophisticated field laboratory where state-of-the-art monitoring techniques have been installed and tested as part of an early-warning system. In this chapter, we provide an overview of the causes, trigger, and extreme mobility of the landslide. We then present new data relevant to the characterization and detection of the present-day instabilities on Turtle Mountain. Fourteen potential instabilities have been identified through field mapping and remote sensing. Lastly, we provide a detailed review of the different in-situ and remote monitoring systems that have been installed on the mountain. The implications of the new data for the future stability of Turtle Mountain and related landslide runout, and for monitoring strategies and risk management, are discussed.

Characterization and genetic mapping of eceriferum-ym (cer-ym), a cutin deficient barley mutant with impaired leaf water retention capacity.

The cuticle covers the aerial parts of land plants, where it serves many important functions, including water retention. Here, a recessive cuticle mutant, eceriferum-ym (cer-ym), of Hordeum vulgare L. (barley) showed abnormally glossy spikes, sheaths, and leaves. The cer-ym mutant plant detached from its root system was hypersensitive to desiccation treatment compared with wild type plants, and detached leaves of mutant lost 41.8% of their initial weight after 1 h of dehydration under laboratory conditions, while that of the wild type plants lost only 7.1%. Stomata function was not affected by the mutation, but the mutant leaves showed increased cuticular permeability to water, suggesting a defective leaf cuticle, which was confirmed by toluidine blue staining. The mutant leaves showed a substantial reduction in the amounts of the major cutin monomers and a slight increase in the main wax component, suggesting that the enhanced cuticle permeability was a consequence of cutin deficiency. cer-ym was mapped within a 0.8 cM interval between EST marker AK370363 and AK251484, a pericentromeric region on chromosome 4H. The results indicate that the desiccation sensitivity of cer-ym is caused by a defect in leaf cutin, and that cer-ym is located in a chromosome 4H pericentromeric region.

Chemical characterization of tin-lead glazed pottery from the Iberian Peninsula and the Canary Islands: initial steps toward a better understanding of Spanish Colonial pottery in Americas

Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.

Selective detection of fluoride based on a pyridinium n-phenolate-calix[4]pyrrole displacement assay: an undergraduate laboratory experiment

A two-step experiment is proposed for a third year class in experimental organic chemistry. Over a period of five weeks, the students synthesized calix[4]pyrrole, a receptor that is highly selective for fluoride, and a pyridinium N-phenolate dye. Subsequently, the students used the synthesized compounds to investigate a displacement assay on the basis of the competition in acetonitrile between fluoride and the dye for calix[4]pyrrole. The experiment increased the students' skills in organic synthesis and in the characterization of organic compounds, provided a very attractive and accessible illustration of important supramolecular phenomena, and allowed the study of a chromogenic chemosensor.

Cytopathological characterization of Mal de Río Cuarto virus in corn, wheat and barley

The Mal de Río Cuarto disease is caused by Mal de Río Cuarto virus (MRCV) transmitted by Delphacodes kuscheli. Comparative studies were carried out on the cytopathological alterations produced by MRCV in corn (Zea mays), wheat (Triticum aestivum) and barley (Hordeum vulgare), as seen with a transmission electron microscope. Corn plants were infected with viruliferous D. kuscheli collected from the endemic disease area (i.e. Río Cuarto County, Córdoba, Argentina). For the viral transmission to small grain cereal plants, laboratory rared insects were used. In this case, the inoculum source was wheat and barley plants infected with MRCV isolate grown in a greenhouse. Leaf samples with conspicuous symptoms were collected: enations and size reduction in corn; crenatures, swelling veins and dark green color in small grain cereals. Viral infection was corroborated by DAS-ELISA. Viroplasms containing complete and incomplete virus particles and fibrillar material were found in the cytoplasm of infected cells in all species. Mature virions were between 60 and 70 nm diameter. In wheat and barley, viroplasms and dispersed particles were observed only in phloem, while in corn virions were also found in cells of the bundle sheath. Crystalline arrays of particles were detected in corn enation constitutive cells. Tubular inclusions were found only in wheat samples. The three species showed abnormalities in the chloroplasts of affected cells. The results showed that MRCV cytopathology has similarities with other viruses from the genus Fijivirus, family family Reoviridae, but slight differences depending upon the host plant.

Methodology for Photovoltaic Modules Characterization and Shading Effects Analysis

This work describes the methodology, basic procedures and instrumental employed by the Solar Energy Laboratory at Universidade Federal do Rio Grande do Sul for the determination of current-voltage characteristic curves of photovoltaic modules. According to this methodology, I-V characteristic curves were acquired for several modules under diverse conditions. The main electrical parameters were determined and the temperature and irradiance influence on photovoltaic modules performance was quantified. It was observed that most of the tested modules presented output power values considerably lower than those specified by the manufacturers. The described hardware allows the testing of modules with open-circuit voltage up to 50 V and short-circuit current up to 8 A.

Characterization of Plasmodium falciparum glutamate dehydrogenase-soluble antigen

The major aim of this study was to characterize a soluble Plasmodium falciparum antigen from the plasma of malaria-infected humans and Plasmodium falciparum culture supernatants, using immunoabsorbent techniques and Western blotting. An Mr 60-kDa protein was isolated from the plasma of patients with Plasmodium falciparum malaria by affinity chromatography using rabbit anti-Proteus spp GDH(NADP+) serum as ligand. This protein, present in plasma of patients with acute Plasmodium falciparum infection, in Plasmodium falciparum culture supernatants, and in immune complexes, was tested with Plasmodium falciparum malaria hyperimmune serum from patients living in hyperendemic areas and rabbit anti-Proteus spp GDH(NADP+) serum prepared in the laboratory. In this report, we describe the results of a study showing that parasite GDH(NADP+) can be used to detect the presence of Plasmodium falciparum. It appears that this technique permits the chromatographic detection of a Plasmodium falciparum excretion antigen that may be used in the production of monoclonal antibodies to improve immunodiagnostic assays for the detection of antigenemia, and opens the possibility of its use as a non-microscopic screening method.