The effect of premedication with ketamine, alone or with diazepam, on anaesthesia with sevoflurane in parrots (Amazona aestiva)

Abstract Background Premedication is rarely used in avian species. The aim of this study was to evaluate the effect of premedication on the quality of sevoflurane induction and anaesthesia in parrots. We hypothesised that premedication would facilitate handling and decrease the minimum anaesthetic dose (MAD). Thirty-six adult parrots were randomly distributed in three groups: group S (n = 12) was premedicated with NaCl 0.9%; group KS (n = 12) was premedicated with 10 mg.kg-1 ketamine; and group KDS (n = 12) was premedicated with 10 mg.kg-1 ketamine and 0.5 mg.kg-1 diazepam, delivered intramuscularly. After induction using 4.5% sevoflurane introduced through a facemask, the MAD was determined for each animal. The heart rate (HR), respiratory rate (RR), systolic arterial blood pressure (SAP), and cloacal temperature (CT) were recorded before premedication (T0), 15 minutes after premedication (T1), and after MAD determination (T2). Arterial blood gas analyses were performed at T0 and T2. The quality of anaesthesia was evaluated using subjective scales based on animal behaviour and handling during induction, maintenance, and recovery. Statistical analyses were performed using analysis of variance or Kruskal-Wallis tests followed by Tukey’s or Dunn’s tests. Results The minimal anaesthetic doses obtained were 2.4 ± 0.37%, 1.7 ± 0.39%, and 1.3 ± 0.32% for groups S, KS, and KDS, respectively. There were no differences in HR, RR, or CT among groups, but SAP was significantly lower in group S. Sedation was observed in both the premedicated S-KS and S-KDS groups. There were no differences in the quality of intubation and recovery from anaesthesia among the three groups, although the induction time was significantly shorter in the pre-medicated groups, and the KS group showed less muscle relaxation. Conclusions Ketamine alone or the ketamine/diazepam combination decreased the MAD of sevoflurane in parrots (Amazona aestiva). Ketamine alone or in combination with diazepam promoted a good quality of sedation, which improved handling and reduced the stress of the birds. All protocols provided safe anaesthesia in this avian species.

Morphologic micro–computed tomography analysis of mandibular premolars with three root canals

Introduction: This study aimed to describe the anatomy of mandibular premolars with type IX canal configuration by using micro–computed tomography. Methods: Mandibular premolars with radicular grooves (n = 105) were scanned, and 16 teeth with type IX configuration were selected. Number and location of canals, distances between anatomic landmarks, occurrence of apical delta, root canal fusion, and furcation canals, as well as 2-dimensional (area, perimeter, roundness, major and minor diameters) and 3-dimensional (volume, surface area, and structuremodel index) analysis were performed. Data were statistically compared by using analysis of variance and Kruskal-Wallis tests (a = 0.05). Results: Overall, specimens had 1 root with a main canal that divided into mesiobuccal, distobuccal, and lingual canals at the furcation level. Mean length of the teeth was 22.9 2.06 mm, and the configuration of the pulp chamber was mostly triangle-shaped. Mean distances from the furcation to the apex and cementoenamel junction were 9.14 2.07 and 5.59 2.19 mm, respectively. Apical delta, root canal fusion, and furcation canals were present in 4, 5, and 10 specimens, respectively. No statistical differences were found in the 2-dimensional and 3-dimensional analyses between root canals (P > .05). Conclusions: Type IX configuration of the root canal system was found in 16 of 105 mandibular premolars with radicular grooves. Most of the specimens had a triangle-shaped pulp chamber. Within this anatomic configuration, complexities of the root canal systems such as the presence of furcation canals, fusion of canals, oval-shaped canals in the apical third, small orifices at the pulp chamber level, and apical delta were also observed

Trends in aortic aneurysm- and dissection-related mortality in the state of São Paulo, Brazil, 1985–2009: multiple-cause-of-death analysis

Background: Aortic aneurysm and dissection are important causes of death in older people. Ruptured aneurysms show catastrophic fatality rates reaching near 80%. Few population-based mortality studies have been published in the world and none in Brazil. The objective of the present study was to use multiple-cause-of-death methodology in the analysis of mortality trends related to aortic aneurysm and dissection in the state of Sao Paulo, between 1985 and 2009. Methods: We analyzed mortality data from the Sao Paulo State Data Analysis System, selecting all death certificates on which aortic aneurysm and dissection were listed as a cause-of-death. The variables sex, age, season of the year, and underlying, associated or total mentions of causes of death were studied using standardized mortality rates, proportions and historical trends. Statistical analyses were performed by chi-square goodness-of-fit and H Kruskal-Wallis tests, and variance analysis. The joinpoint regression model was used to evaluate changes in age-standardized rates trends. A p value less than 0.05 was regarded as significant. Results: Over a 25-year period, there were 42,615 deaths related to aortic aneurysm and dissection, of which 36,088 (84.7%) were identified as underlying cause and 6,527 (15.3%) as an associated cause-of-death. Dissection and ruptured aneurysms were considered as an underlying cause of death in 93% of the deaths. For the entire period, a significant increased trend of age-standardized death rates was observed in men and women, while certain non-significant decreases occurred from 1996/2004 until 2009. Abdominal aortic aneurysms and aortic dissections prevailed among men and aortic dissections and aortic aneurysms of unspecified site among women. In 1985 and 2009 death rates ratios of men to women were respectively 2.86 and 2.19, corresponding to a difference decrease between rates of 23.4%. For aortic dissection, ruptured and non-ruptured aneurysms, the overall mean ages at death were, respectively, 63.2, 68.4 and 71.6 years; while, as the underlying cause, the main associated causes of death were as follows: hemorrhages (in 43.8%/40.5%/13.9%); hypertensive diseases (in 49.2%/22.43%/24.5%) and atherosclerosis (in 14.8%/25.5%/15.3%); and, as associated causes, their principal overall underlying causes of death were diseases of the circulatory (55.7%), and respiratory (13.8%) systems and neoplasms (7.8%). A significant seasonal variation, with highest frequency in winter, occurred in deaths identified as underlying cause for aortic dissection, ruptured and non-ruptured aneurysms. Conclusions: This study introduces the methodology of multiple-causes-of-death to enhance epidemiologic knowledge of aortic aneurysm and dissection in São Paulo, Brazil. The results presented confer light to the importance of mortality statistics and the need for epidemiologic studies to understand unique trends in our own population.

Performance of different polishing techniques for direct CAD/CAM ceramic restorations

This in vitro study evaluated the performance of three ceramic and two commonly used polishing methods on two CAD/CAM ceramics. Surface roughness and quality were compared. A glazed group (GLGR) of each ceramic material served as reference. One-hundred and twenty specimens of VITABLOCS Mark II (VITA) and 120 specimens of IPS Empress CAD (IPS) were roughened in a standardized manner. Twenty VITA and 20 IPS specimens were glazed (VITA Akzent Glaze/Empress Universal Glaze). Five polishing methods were investigated (n=20/group): 1) EVE Diacera W11DC-Set (EVE), 2) JOTA 9812-Set (JOTA), 3) OptraFine-System (OFI), 4) Sof-Lex 2382 discs (SOF) and 5) Brownie/Greenie/Occlubrush (BGO). Polishing quality was measured with a surface roughness meter (Ra and Rz values). The significance level was set at alpha=0.05. Kruskal Wallis tests and pairwise Wilcoxon rank sum tests with Bonferroni-Holm adjustment were used. Qualitative surface evaluation of representative specimens was done with SEM. On VITA ceramics, SOF produced lower Ra (p<0.00001) but higher Rz values than GLGR (p=0.003); EVE, JOTA, OFI and BGO yielded significantly higher Ra and Rz values than GLGR. On IPS ceramics, SOF and JOTA exhibited lower Ra values than GLGR (p<0.0001). Equivalent Ra but significantly higher Rz values occurred between GLGR and EVE, OFI or BGO. VITA and IPS exhibited the smoothest surfaces when polished with SOF. Nevertheless, ceramic polishing systems are still of interest to clinicians using CAD/CAM, as these methods are universally applicable and showed an increased durability compared to the investigated silicon polishers.

Success rate and efficiency of activator treatment

In a retrospective multicentre study, the success rate and efficiency of activator treatment were analysed. All patients from two University clinics (Giessen, Germany and Berne, Switzerland) that fulfilled the selection criteria (Class II division 1 malocclusion, activator treatment, no aplasia, no extraction of permanent teeth, no syndromes, no previous orthodontic treatment except transverse maxillary expansion, full available records) were included in the study. The subject material amounted to 222 patients with a mean age of 10.6 years. Patient records, lateral head films, and dental casts were evaluated. Treatment was classified as successful if the molar relationship improved by at least half to three-fourths cusp width depending on whether or not the leeway space was used during treatment. Group comparisons were carried out using Wilcoxon two-sample and Kruskal-Wallis tests. For discrete data, chi-square analysis was used and Fisher's exact test when the sample size was small. Stepwise logistic regression was also employed. The success rate was 64 per cent in Giessen and 66 per cent in Berne. The only factor that significantly (P < 0.001) influenced treatment success was the level of co-operation. In approximately 27 per cent of the patients at both centres, the post-treatment occlusion was an 'ideal' Class I. In an additional 38 per cent of the patients, marked improvements in occlusal relationships were found. In subjects with Class II division 1 malocclusions, in which orthodontic treatment is performed by means of activators, a marked improvement of the Class II dental arch relationships can be expected in approximately 65 per cent of subjects. Activator treatment is more efficient in the late than in the early mixed dentition.

Light curing through glass ceramics: effect of curing mode on micromechanical properties of dual-curing resin cements

OBJECTIVES The aim of this study was to investigate micromechanical properties of five dual-curing resin cements after different curing modes including light curing through glass ceramic materials. MATERIALS AND METHODS Vickers hardness (VH) and indentation modulus (Y HU) of Panavia F2.0, RelyX Unicem 2 Automix, SpeedCEM, BisCem, and BeautiCem SA were measured after 1 week of storage (37 °C, 100 % humidity). The resin cements were tested following self-curing or light curing with the second-generation light-emitting diode (LED) curing unit Elipar FreeLight 2 in Standard Mode (1,545 mW/cm(2)) or with the third-generation LED curing unit VALO in High Power Mode (1,869 mW/cm(2)) or in XtraPower Mode (3,505 mW/cm(2)). Light curing was performed directly or through glass ceramic discs of 1.5 or 3 mm thickness of IPS Empress CAD or IPS e.max CAD. VH and Y HU were analysed with Kruskal-Wallis tests followed by pairwise Wilcoxon rank sum tests (α = 0.05). RESULTS RelyX Unicem 2 Automix resulted in the highest VH and Y HU followed by BeautiCem SA, BisCem, SpeedCEM, and finally Panavia F2.0. Self-curing of RelyX Unicem 2 Automix and SpeedCEM lowered VH and Y HU compared to light curing whereas self-curing of Panavia F2.0, BisCem, and BeautiCem SA led to similar or significantly higher VH and Y HU compared to light curing. Generally, direct light curing resulted in similar or lower VH and Y HU compared to light curing through 1.5-mm-thick ceramic discs. Light curing through 3-mm-thick discs of IPS e.max CAD generally reduced VH and Y HU for all resin cements except SpeedCEM, which was the least affected by light curing through ceramic discs. CONCLUSIONS The resin cements responded heterogeneously to changes in curing mode. The applied irradiances and light curing times adequately cured the resin cements even through 1.5-mm-thick ceramic discs. CLINICAL RELEVANCE When light curing resin cements through thick glass ceramic restorations, clinicians should consider to prolong the light curing times even with LED curing units providing high irradiances.

Bond Strength of Resin Composite to Dentin with Different Adhesive Systems: Influence of Relative Humidity and Application Time.

PURPOSE To investigate the influence of relative humidity and application time on bond strength to dentin of different classes of adhesive systems. MATERIALS AND METHODS A total of 360 extracted human molars were ground to mid-coronal dentin. The dentin specimens were treated with one of six adhesive systems (Syntac Classic, OptiBond FL, Clearfil SE Bond, AdheSE, Xeno Select, or Scotchbond Universal), and resin composite (Filtek Z250) was applied to the treated dentin surface under four experimental conditions (45% relative humidity/application time according to manufacturers' instructions; 45% relative humidity/reduced application time; 85% relative humidity/application time according to manufacturers' instructions; 85% relative humidity/reduced application time). After storage (37°C, 100% humidity, 24 h), shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by Kruskal-Wallis tests and Mann-Whitney U-tests with Bonferroni-Holm correction for multiple testing (level of significance: α = 0.05). RESULTS Increased relative humidity and reduced application time had no effect on SBS for Clearfil SE Bond and Scotchbond Universal (p = 1.00). For Syntac Classic, OptiBond FL, AdheSE, and Xeno Select there was no effect on SBS of reduced application time of the adhesive system (p ≥ 0.403). However, increased relative humidity significantly reduced SBS for Syntac Classic, OptiBond FL, and Xeno Select irrespective of application time (p ≤ 0.003), whereas for AdheSE, increased relative humidity significantly reduced SBS at recommended application time only (p = 0.002). CONCLUSION Generally, increased relative humidity had a detrimental effect on SBS to dentin, but reduced application time had no effect.

Einfluss von Politursystemen auf Oberflächenrauigkeit und mechanische Eigenschaften von CAD/CAM-Materialien

Zielsetzung: Das Ziel dieser Studie war, den Einfluss von drei Politursystemen auf die Oberflächenrauigkeit von verschiedenen Materialien für computer-aided design/computer-aided manufacturing (CAD/CAM) Restaurationen mittels Profilometrie sowie die mikromechanischen Eigenschaften der Materialien mittels Mikrohärtemessgerät zu analysieren. Materialien und Methoden: Von dem CAD/CAM-Kompositmaterial Paradigm MZ100 (3M ESPE), der CAD/CAM-Feldspatkeramik VITABLOCS Mark II (VITA Zahnfabrik) und den CAD/CAM-Hybridmaterialien Lava Ultimate (3M ESPE), VITA ENAMIC (VITA Zahnfabrik) und AMBARINO High-Class (Creamed) wurden je 60 Prüfkörper zugeschnitten, gekennzeichnet und standardisiert aufgerauht. Die standardisierte Aufrauhung wurde mit Baseline-Rauigkeitsmessungen überprüft (Ra und Rz; µm). Die Prüfkörper wurden mit einem von drei Politursystemen poliert (n=20 pro CAD/CAM-Material): 1) Sof-Lex Scheiben (Disc-System, 3 Politurschritte: medium, fein und superfein; 3M ESPE), 2) VITA Polishing Set Clinical (Silikonpolitursystem, 2 Politurschritte: medium und fein; VITA Zahnfabrik) oder 3) KENDA Nobilis (Silikonpolierer, 1 Politurschritt (universal); KENDA Dental). Nach Politur der Prüfkörper wurden Ra und Rz sowie die mikromechanischen Eigenschaften Oberflächenhärte (VHN; Vickers Härte) und Elastizitätsmodul (EM; GPa) gemessen. In den darauf folgenden sechs Monaten wurden die Prüfkörper in Leitungswasser gelagert und insgesamt sechs Mal einem maschinellem Zahnbürsten zugeführt. Anschliessend wurden erneut Ra und Rz sowie VHN und EM gemessen. Ra-, Rz-, VHN- und EM-Werte wurden mittels nichtparametrischer ANOVA global analysiert und die p-Werte mittels Bonferroni-Holm Korrektur für multiples Testen korrigiert. Als post-hoc Tests wurden Kruskal-Wallis-Tests sowie exakte Wilcoxon Rangsummen-Tests verwendet und die p-Werte wurden nicht korrigiert. Das Signifikanzniveau wurde auf α=0,05 festgelegt. Resultate: Für alle drei CAD/CAM-Hybridmaterialien ergaben Sof-Lex Scheiben nach der Politur die tiefste Oberflächenrauigkeit (d. h. die tiefsten Ra- und Rz-Werte), gefolgt von KENDA Nobilis und von dem VITA Polishing Set Clinical. Bei dem CAD/CAM-Kompositmaterial sowie bei der CAD/CAM-Feldspatkeramik ergaben Sof-Lex Scheiben und KENDA Nobilis ähnliche Resultate, gefolgt von dem VITA Polishing Set Clinical. Bei einigen CAD/CAM-Materialien zeigten sich – zum Teil in Abhängigkeit des Politursystems – nach maschinellem Zahnbürsten und Lagerung signifikant höhere Ra- und Rz-Werte. Die CAD/CAM-Materialien zeigten unabhängig des Politursystems und der Lagerung signifikant verschiedene VHN- und EM-Werte. Bei einigen CAD/CAM-Materialien zeigten sich – zum Teil ebenfalls in Abhängigkeit des Politursystems – nach maschinellem Zahn-bürsten und Lagerung signifikant tiefere VHN- und EM-Werte. Schlussfolgerungen: Die Wahl des Politursystems beeinflusste die Oberflächenrauigkeit der CAD/CAM-Materialien markant, wobei Sof-Lex Scheiben insgesamt die besten Politurresultate zeigten, gefolgt von dem Silikonpolierer KENDA Nobilis. Von der Verwendung des Silikonpolitursystems VITA Polishing Set Clinical muss eher abgeraten werden. Das CAD/CAM-Kompositmaterial Paradigm MZ100 und die CAD/CAM-Hybridmaterialien Lava Ultimate und AMBARINO High-Class als weichere und elastischere Materialien liessen sich insgesamt besser polieren, waren aber bezüglich mechanischer Eigenschaften anfälliger auf Lagerung als die härtere CAD/CAM-Feldspatkeramik VITABLOCS Mark II und das CAD/CAM-Hybridmaterial VITA ENAMIC.

Mismatch Repair Deficient Tumors Lacking Known Sporadic Causes: Are They All Due to Lynch Syndrome?

BACKGROUND: Mismatch repair deficient (MMRD) colorectal (CRC) or endometrial (EC) cancers in the absence of MLH1 promoter hypermethylation and BRAF mutations are suggestive of Lynch syndrome (LS). Positive germline genetic test results confirm LS. It is unclear if individuals with MMRD tumors but no identified germline mutation or sporadic cause (MMRD+/germline-) have LS. HYPOTHESIS: Since LS is hereditary, individuals with LS should have a stronger family history of LS-related cancers than individuals with sporadic tumors. We hypothesized that MMRD+/germline- CRC and/or EC patients would have less suggestive family histories than LS CRC and/or EC patients. METHODS: 253 individuals with an MMRD CRC or EC who underwent genetic counseling at one institution were included in analysis in 1 of 4 groups: LS, MMRD+/germline-, MMRD+/VUS, sporadic MSI-H (MMRD tumor with MLH1 promoter hypermethylation or BRAF mutation). Family histories were analyzed utilizing MMRpro and PREMM1,2,6. Kruskal-Wallis tests were used to compare family history scores. Logistic regression was used to determine what factors were predictive of LS. RESULTS: MMRD+/germline- individuals had significantly lower median family history scores (PREMM1,2,6=7.3, MMRpro=8.1) than LS individuals (PREMM1,2,6=26.1, MMRpro=89.8, p CONCLUSION: MMRD+/germline- individuals have less suggestive family histories of LS than individuals with LS, but more suggestive family histories than sporadic MSI-H individuals. CRC and/or EC patients with abnormal tumor studies are more likely to have a germline LS mutation if they have a family history suggestive of hereditary cancer. These results imply that the MMRD+/germline- group may not all have LS. This finding highlights the need to determine other somatic, epigenetic or germline causes of MMRD tumors so that these patients and their families can be accurately counseled regarding screening and management.

(Table 1) Characteristics of Klebsormidium (filamentous green algae) strains from the Antarctic, Arctic and Slovakia

The freezing and desiccation tolerance of 12 Klebsormidium strains, isolated from various habitats (aero-terrestrial, terrestrial, and hydro-terrestrial) from distinct geographical regions (Antarctic - South Shetlands, King George Island, Arctic - Ellesmere Island, Svalbard, Central Europe - Slovakia) were studied. Each strain was exposed to several freezing (-4°C, -40°C, -196°C) and desiccation (+4°C and +20°C) regimes, simulating both natural and semi-natural freeze-thaw and desiccation cycles. The level of resistance (or the survival capacity) was evaluated by chlorophyll a content, viability, and chlorophyll fluorescence evaluations. No statistical differences (Kruskal-Wallis tests) between strains originating from different regions were observed. All strains tested were highly resistant to both freezing and desiccation injuries. Freezing down to -196°C was the most harmful regime for all studied strains. Freezing at -4°C did not influence the survival of studied strains. Further, freezing down to -40°C (at a speed of 4°C/min) was not fatal for most of the strains. RDA analysis showed that certain Antarctic and Arctic strains did not survive desiccation at +4°C; however, freezing at -40°C, as well as desiccation at +20 °C was not fatal to them. On the other hand, other strains from the Antarctic, the Arctic, and Central Europe (Slovakia) survived desiccation at temperatures of +4°C, and freezing down to -40°C. It appears that species of Klebsormidium which occupy an environment where both seasonal and diurnal variations of water availability prevail, are well adapted to freezing and desiccation injuries. Freezing and desiccation tolerance is not species-specific nor is the resilience only found in polar strains as it is also a feature of temperate strains.

Análise crítica das técnicas de tratamento cirúrgico da obesidade mórbida

Introdução: A obesidade é uma afecção com alta prevalência no Brasil e no mundo. É fator de risco para comorbidades como Diabetes tipo 2 (DM2), Hipertensão Arterial Sistêmica (HAS), Dislipidemia, Apneia Obstrutiva do Sono (AOS), entre outras. Seu tratamento é complexo e a cirurgia bariátrica, executada por diferentes técnicas, tem sido uma das opções. Objetivo: Analisar os resultados publicados na literatura em relação às técnicas cirúrgicas de Banda Gástrica Ajustável (BGA), Gastrectomia Vertical (GV), Gastroplastia com derivação em Y de Roux (GDYR) e Derivação Biliopancreática (DBP) - técnica de \"Scopinaro\" e de \"Duodenal Switch\" quanto às complicações operatórias, à mortalidade, à perda do excesso de peso (PEP) e ao reganho, e a resolução das comorbidades após a operação. Método: Foram analisados 116 estudos selecionados na base de dados MEDLINE por meio da PubMed publicados na Língua Inglesa entre 2003 e 2014. Para comparar as diferentes técnicas cirúrgicas (BGA, GV, GDYR e DBP), realizou-se estudo estatístico por meio da análise de variância (ANOVA) aplicando os testes de Duncan e de Kruskal Wallis avaliando: complicações pós-operatórias (fístula, sangramento e óbito); perda e reganho do excesso de peso, e resolução das comorbidades. Resultados: A ocorrência de sangramento foi de 0,6% na média entre todos os estudos, sendo 0,44% na BGA; 1,29% na GV; 0,81% na GDYR e 2,09% na DBP. Já a ocorrência de fístulas foi de 1,3% na média entre todos os estudos, 0,68% para BGA; 1,93% para GV; 2,18% para GDYR e 5,23% para DBP. A mortalidade nos primeiros 30 dias pós-operatórios foi de 0,9% na média entre todos os estudos, 0,05% na BGA; 0,16% na GV; 0,60% na GDYR e 2,52% na DBP. A PEP após cinco anos na média entre todos os estudos foi de 63,86%, especificamente na BGA, foi de 48,35%; 52,7% na GV; 71,04% na GDYR e 77,90% na DBP. A taxa de DM2 resolvida foi de 76,9% na média entre todos os estudos, sendo 46,80% na BGA; 79,38% na GV; 79,86% na GDYR e 90,78% na DBP. A taxa de Dislipidemia resolvida após a operação foi de 74,0% na média de todo o estudo, sendo 51,28% na BGA; 58,00% na GV; 73,28% na GDYR e 90,75% na DBP. A taxa de HAS resolvida após a operação foi de 61,80% na média de todo o estudo, sendo 54,50% na BGA; 52,27% na GV; 68,11% na GDYR e 82,12% na DBP. A taxa de AOS resolvida após a operação foi de 75,0% na média de todo o estudo, sendo 56,85% na BGA; 51,43% na GV; 80,31% na GDYR e 92,50% na DBP. Conclusão: quando analisadas e comparada as quatro técnicas observa-se que nos primeiros 30 dias pós-operatório a taxa de sangramento é superior nos pacientes submetidos à DBP e taxa de fístula inferior nos pacientes da BGA. Quanto à mortalidade observou-se taxa mais pronunciada nos pacientes submetidos à DBP e menos nos submetidos à BGA. Quanto à PEP observou-se uma uniformidade entre os pacientes submetidos à GV, GDYR E DBP até o terceiro ano. Após esse período observa-se reganho de peso nos submetidos à GV até o quinto ano de seguimento. Já nos pacientes submetidos à BGA observou-se taxas de PEP menos pronunciadas em relação às demais desde o início do seguimento. Quanto à resolução das comorbidades observou-se taxas de resolução de DM2 inferiores nos pacientes submetidos à BGA, e não houve diferença entre nenhuma técnica quanto à resolução das demais comorbidades: HAS, AOS e dislipidemia

Resources use and conservation attitudes of local people in the Western Terai landscape, Nepal

Two protected areas: Royal Bardia National Park (RBNP) and Royal Suklaphanta Wildlife Reserve (RSWR) in the Western Terai, Nepal, are under threats due to present political turmoil, uncontrolled immigration, inefficient land reform policies and unsustainable resource use. I did a stratified random questionnaire survey of 234 households to determine how resource use patterns and problems influence conservation attitudes. Chi-square, Student's t, Mann-Whitney and Kruskal-Wallis tests, and multiple regression were used. There was spatio-temporal variability in resource use patterns and dependency. People were collecting eight and seven types of resources in RBNP and RSWR, respectively. However, people in RBNP were more dependent on resources than RSWR. In both areas, the problem of firewood is serious. The mean attitude score of RBNP (8.4 ± 1.44) was significantly higher than the score of RSWR (7.7 ± 1.66; t = 3.24, p = 0.0007). Conservation attitude was determined by variables such as participation in trainings, wildlife damage, and satisfaction towards user groups.

Caracterização das comunidades de aves florestais no distrito de Bragança

Com objetivo de caracterizar a comunidade de aves florestais do Distrito de Bragança, fez-se um estudo em quatro locais de características diferentes sob ponto de vista de estrutura e composição de espécies, através de recolha de informação com base nas listas de 10 espécies de Mackinnon e pelo método captura com redes de neblina, para caracterização das biometrias e parâmetros populacionais, de modo a caracterizar a estrutura das comunidades de aves em cada local. A Combinação dos dois métodos possibilitou a captura e identificação de indivíduos de 44 espécies diferentes, pertencentes a 24 famílias distintas. Destas, as mais representativas foram determinadas através do Índice de Frequência das Listas (IFL) e foram Parus major, Erithacus rubecula, Turdus merula e Sylvia atricapilla. Os resultados referentes à riqueza específica, obtidos através das listas de MacKinnon foram analisados com ANOVA não paramétricas (Kruskal-Wallis). Dos quatro locais, a Ricafé mostrou diferenças significativas na variação de número de espécies. Em relação aos períodos de capturas, o segundo quadrimestre teve número de espécies estatisticamente diferentes dos restantes quadrimestres do ano. No Período de Invernada há menor atividade de aves em todos os locais. Pinhal e Tabuado têm pouca diversidade de espécies.

Ex vivo biocompatibility tests of regular and white forms of mineral trioxide aggregate

Aim: To examine the genotoxicity and cytotoxicity of regular and white mineral trioxide aggregate (MTA) ex vivo by the single-cell gel (comet) assay and trypan blue exclusion test, respectively. Methodology: Aliquots of 1 × 10 4 Chinese hamster ovary cells were incubated at 37°C for 3 h with grey and white forms of MTA at final concentrations ranging from 1 to 1000 μg mL -1. The negative control group was treated with vehicle control phosphate buffer solution for 3 h at 37°C and the positive control group was treated with methyl metasulfonate (at 1 μg mL -1) for 1 h at 37°C. After incubation, the cells were centrifuged at 180 g for 5 min and washed twice with fresh medium and resuspended with fresh medium. Each individual treatment was repeated three times consecutively to ensure reproducibility. Parameters from single-cell gel (comet) and cytotoxicity assays were assessed by the Kruskal-Wallis nonparametric test. Results: Neither compounds produced genotoxic effects with respect to the single-cell gel (comet) assay in all concentrations evaluated. In the same way, the dose-response relationships of all compounds tested at concentrations ranging from 1 to 1000 μg mL -1 on cell viability assessed by the trypan blue assay displayed no statistically significant differences (P > 0.05) for either endodontic material. Conclusions: Regular (grey) and white MTA are not genotoxins and do not induce cellular death. © 2006 International Endodontic Journal.

Efficacy Of Ethylene-diamine-tetra-acetic Acid Associated With Chlorhexidine On Intracanal Medication Removal: A Scanning Electron Microscopy Study.

The aim of this study was to evaluate the effectiveness of 17% ethylene-diamine-tetra-acetic acid (EDTA) used alone or associated with 2% chlorhexidine gel (CHX) on intracanal medications (ICM) removal. Sixty single-rooted human teeth with fully formed apex were selected. The cervical and middle thirds of each canal were prepared with Gates Glidden drills and rotary files. The apical third was shaped with hand files. The specimens were randomly divided into two groups depending on the ICM used after instrumentation: calcium hydroxide Ca(OH)(2) +CHX or Ca(OH)(2) +sterile saline (SS). After seven days, each group was divided into subgroups according to the protocol used for ICM removal: instrumentation and irrigation either with EDTA, CHX+EDTA, or SS (control groups). All specimens were sectioned and processed for observation of the apical thirds by using scanning electron microscopy. Two calibrated evaluators attributed scores to each specimen. The differences between the protocols for ICM removal were analyzed with Kruskal-Wallis and Mann-Whitney U tests. Friedman and Wilcoxon signed rank tests were used for comparison between the score of debris obtained in each root canal third. Remains of Ca(OH)(2) were found in all specimens independently of the protocol and ICM used (P > 0.05). Seventeen percent EDTA showed the best results in removing ICM when used alone (P < 0.05), particularly in those associated with CHX. It was concluded that the chelating agent 17% EDTA significantly improved the removal of ICM when used alone. Furthermore, the type of the vehicle associated with Ca(OH)(2) also plays a role in the ICM removal.