Efeitos da autoclavação na velocidade e capacidade absorvente de cones de papel empregados em Endodontia

A presença de umidade no interior do sistema de canais radiculares, após o preparo biomecânico e sua desinfecção, pode influenciar no selamento apical e no êxito da obturação endodôntica. O objetivo deste trabalho foi avaliar a influência do número de esterilizações em autoclave, sobre a capacidade e velocidade de absorção dos cones de papel empregados em Endodontia. Foram analisados 440 cones de papel número 40, dos quais dez cones de cada marca comercial receberam de zero à dez ciclos de esterilização em autoclave (134°C/15 psi/15 minutos). Após cada ciclo de esterilização, os cones foram avaliados quanto a capacidade e velocidade de absorção de solução de hipoclorito de sódio a 1%. Os dados foram submetidos à análise estatística por meio dos testes da ANOVA (dois critérios) e Tukey (5%). Pôde-se concluir que, quanto à capacidade de absorção, os cones que sofreram menor influência dos diversos ciclos de esterilização em autoclave foram, em ordem decrescente: Tanari, Tanari cell pack, Conne e Diadent cell pack. Quanto à velocidade de absorção, os cones que obtiveram os melhores resultados foram: Tanari cell pack, Tanari, Conne e Diadent cell pack. A autoclavação mostrou-se um procedimento viável, em até 10 ciclos, apenas para a esterilização de cones de papel absorvente da marca Tanari utilizados em Endodontia.

Um algoritmo enumerativo baseado em ordenamento parcial para resolução do problema de minimização de trocas de ferramentas

No problema de minimização de troca de ferramentas procura-se por uma sequência para processar um conjunto de tarefas de modo que o número requerido de trocas de ferramentas seja o menor possível. Neste trabalho propõe-se um algoritmo para resolver este problema baseado em um ordenamento parcial das tarefas. Uma sequência ótima é obtida expandindo-se as sequências parciais enumeradas. Testes computacionais são apresentados.

Uma nova heurística para o problema de minimização de trocas de ferramentas

O problema de minimização de troca de ferramentas (MTSP) busca uma sequência de processamento de um conjunto de tarefas, de modo a minimizar o número de trocas de ferramentas requeridas. Este trabalho apresenta uma nova heurística para o MTSP, capaz de produzir bons limitantes superiores para um algoritmo enumerativo. Esta heurística possui duas fases: uma fase construtiva que é baseada em um grafo em que os vértices correspondem a ferramentas e existe um arco k = (i, j) que liga os vértices i e j se e somente se as ferramentas i e j são necessárias para a execução de alguma tarefa k; e uma fase de refinamento baseada na meta-heurística Busca Local Iterativa. Resultados computacionais mostram que a heurística proposta tem um bom desempenho para os problemas testados, contribuindo para uma redução significativa no número de nós gerados de um algoritmo enumerativo.

The absolute configuration of 1-(3 ',4 '-dihydroxycinnamoyl)cyclopentane-2,3-diol from the Amazonian tree Chimarrhis turbinata

An antioxidant, 1-(3',4'-dihydroxycinnamoyl) cyclopentane-2,3-diol [ or ( E)-2,3-dihydroxycyclopentyl-3-(3',4'-dihydroxyphenyl) acrylate ( 1)], and two known trans- and cis-chlorogenic acid methyl esters were isolated from the ethanolic extract of the leaves of Chimarrhis turbinata. The relative configuration of 1 was determined by NMR and by comparison of the circular dichroic spectrum ( CD) with those of the enantiomers of synthetic 3', 4'-dimethoxycinnamoyl analogues. The absolute configuration of one of the synthetic enantiomers was determined using the CD exciton chirality method. This established the structure of naturally occurring 1 as (E)- 2,3-dihydroxycyclopentyl- 3-(3', 4'-dihydroxyphenyl) acrylate.

Foraminiferal ecological zonation along a Brazilian mangrove transect: Diversity, morphotypes and the influence of subaerial exposure time.

Two foraminiferal associations comprising only arenaceous species define two distinct environments in a 340 m-long mangrove transect at Cardoso Island, Trapande Bay (Cananeia-Iguape estuarine system, SP, Brazil). The "lower muddy flat" (LMF), from the outer mangrove fringe inwards towards land (100 m), is positioned in the lower plain between 0.04 and 0.23 m above the mean sea level (msl), and remains subaerially exposed between 48.5 and 65.6% of the time. This environment is characterized by higher foraminiferal diversity and evenness (McIntosh's D = 0.54 [plus or minus] 0.21 and Pielou's E = 0.68 [plus or minus] 0.25, respectively) and is dominated by Arenoparrella mexicana and Trochammina inflata, and to a lesser extent by Ammotium directum and Textularia earlandi. The mangrove plant of this segment is a Rhizophoretum with average height of 8.4 [plus or minus] 1.2 m. The sediment is characterized by higher concentration of organic matter (93.5 [plus or minus] 32.3 g dm-3) and metals (e.g. V = 53.4 [plus or minus] 21.8 ppm and Zn = 46.4 [plus or minus] 21.3 ppm). The "upper sandy flat" (USF), 240 m wide along the transect, is positioned in the upper plain between 0.28 and 0.89 m above the msl, and remains subaerially exposed between 69.7 and 98.5% of the time. This environment is characterized by a lower diversity and evenness (D = 0.33 [plus or minus] 0.17 and E = 0.49 [plus or minus] 0.20, respectively). The association is dominated by species T. inflata and Miliammina fusca. The Rhizophoretum exhibits a lower average height of 3.6 [plus or minus] 0.6 m. The sediment is poorer in organic matter (39.3 [plus or minus] 15.0 g dm-3) and metals (e.g. V = 13.0 [plus or minus] 6.8 ppm and Zn = 6.9 [plus or minus] 3.7 ppm). Whereas "elongate" tests (uniserial, biserial and planospiral followed by a uniserial portion) are restricted to the LMF, "spiraled" species dominate the USF. Subaerial exposure time seems to exert a primary influence on species distribution, in addition to salinity and sediment type. Species may be adapted to different exposure times, a factor dependent on their position on the intertidal zone and the tidal regime, which should be taken into account in relative sea level reconstructions based on intertidal foraminifera. These patterns have important implications for studies investigating the ecology and paleoecology of foraminifera and subtle fluctuations in relative sea level during the Quaternary.

Comparação entre limiar anaeróbio determinado por variáveis ventilatórias e pela resposta do lactato sanguíneo em ciclistas

Many investigations have shown that the coincidence between the ventilatory thresholds and those thresholds using the lactate response does not happen all of the time, suggesting that there is no relationship between the cause-effect between these phenomena. Thus, the present study had as main purpose to compare and correlate the Oxygen consumption (V̇O 2), the power (W), and the heart rate (HR) values attained using protocols to determine the Ventilatory Threshold (VT) and the Individual Anaerobic Threshold (IAT). The sampling was constituted by eight State and National level cyclists (age: 27.88 ± 8.77 years; body mass: 65.19 ± 4.40 kg; height: 169.31 ± 5,77 cm). The IAT was determined starting from a three minutes 50 W warm up with progressive increases of 50 W.3min -1 up to achieving the voluntary exhaustion, when the blood was collected in the last 20 seconds of each phase, and during the recovering period. In order to determine the VT, it was used the same protocol used to determine the IAT, but without performing the blood collection. The VT was identified through the changes in the pulmonary ventilation, as well as of the ventilatory equivalent of the O 2 and CO 2. The t-Student test showed no significant statistical difference in any of the attained variables. The associations found were high and significant. The V̇O 2 (ml.kg -1.min. -1), P (W), and HR (bpm) corresponding to the VT and IAT, as well as the associations between variables were respectively: 48.00 ± 3.82 vs. 48.08 ± 3.71 (r = 0.90); 256.25 ± 32.04 vs. 246.88 ± 33.91 (r = 0.84); 173.75 ± 9.18 vs. 171.25 ± 12.02 (r = 0.97). According to the results attained, it can be concluded that the IAT and the VT produce similar V̇O 2, W, and HR values, favoring the adoption of the VT because it is a non-invasive method to determine the anaerobic threshold in cyclists.

The effect of endodontic materials on the optical density of dyes used in marginal leakage studies

The aim of this study was to determine the effect of the exposure of different endodontic materials to different dye solutions by evaluating the optical density of the dye solutions. Seventy-five plastic tubes were filled with one of the following materials: AH Plus, Sealapex, Portland cement, MTA (Angelus and Pro Root) and fifteen control plastic tubes were not. Each specimen of material and control was immersed in a container with 1 ml of each dye solution. A 0.1 ml-dye solution aliquote was removed before immersion and after 12, 24, 48 and 72 hours of each specimen immersion to record its optical density (OD) in a spectrophotometer. Statistical analysis was performed with ANOVA and Tukey tests (5%). No significant difference was found among any of the solution OD values for AH Plus cement. Portland cement promoted different OD values after 12 hours of immersion. MTA-Angelus cement presented different OD values only for 2% rhodamine B and the MTA-Pro Root cement presented different OD values in all 2% rhodamine B samples. Sealapex cement promoted a reduction in the India Ink OD values. Dye evaluation through OD seems to be an interesting method to select the best dye solution to use in a given marginal leakage study.

Mercury, copper, and zinc concentrations in extracted human teeth

Amalgam has been used as a filling material for over 150 years. Mercury, copper, and zinc are present in restoration. The aim of this study was to compare mercury, copper, and zinc concentrations in extracted human teeth with amalgam restorations and teeth without restorations. Thirty-two teeth, 15 restored with dental amalgam and 17 without restorations, were chemically analyzed in an Optima 3300 DV (Perkin Elmer) plasma emission spectrometer. Mercury, copper, and zinc were found in human teeth regardless of the presence of amalgam restorations. The highest mercury concentrations were found in the coronary portions of the teeth with amalgam restorations. Copper concentrations were very high. Zinc concentrations in the teeth without restoration were lower than those seen in the coronary portion of the teeth with restorations. © 2009 Heldref Publications.

Active control in rotating machinery using magnetic actuators with linear matrix inequalities (LMI) approach

The recent years have seen the appearance of innovative system for acoustic and vibration attenuation, most of them integrating new actuator technologies. In this sense, the study of algorithms for active vibrations control in rotating machinery became an area of enormous interest, mainly due to countless demands of an optimal performance of mechanical systems in aircraft, aerospace and automotive structures. In this way, this paper presents an approach that is numerically verified for active vibration control in a rotor using Active Magnetic Bearings (AMB). The control design in a discrete state-space formulation is carried out through feedback technique and Linear Matrix Inequalities (LMI) approach. LMI is useful for system with uncertainties. The AMB uses electromagnetic forces to support a rotor without mechanical contact. By monitoring the position of the shaft and changing the dynamics of the system accordingly, the AMB keeps the rotor in a desired position. This unique feature has broadened for the applications of AMB and now they can be considered not only as a main support bearing in a machine but also as dampers for vibration control and force actuators. © 2009 Society for Experimental Mechanics Inc.

Design of a state observer using decay rate LMI constraints for fault detection in mechanical systems

Nowadays, one of the most important concerns for many companies is to maintain the operation of their systems without sudden equipment break down. Because of this, new techniques for fault detection and location in mechanical systems subject to dynamic loads have been developed. This paper studies of the influence of the decay rate in the design of state observers using LMI for fault detection in mechanical systems. This influence is analyzed by the performance index proposed by Huh and Stein for the condition of a state observer. An example is presented to illustrate the methodology discussed.

The usable leftover one-dimensional cutting stock problem-a priority-in-use heuristic

We consider a one-dimensional cutting stock problem in which the material not used in the cutting patterns, if large enough, is kept for use in the future. Moreover, it is assumed that leftovers should not remain in stock for a long time, hence, such leftovers have priority-in-use compared to standard objects (objects bought by the industry) in stock. A heuristic procedure is proposed for this problem, and its performance is analyzed by solving randomly generated dynamic instances where successive problems are solved in a time horizon. For each period, new demands arise and a new problem is solved on the basis of the information about the stock of the previous periods (remaining standard objects in the stock) and usable leftovers generated during those previous periods. The computational experiments show that the solutions presented by the proposed heuristic are better than the solutions obtained by other heuristics from the literature. © 2012 The Authors. International Transactions in Operational Research © 2012 International Federation of Operational Research Societies.

Uso do extrato pirolenhoso: Efeito no solo e nas plantas de tomate

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preditores de incorreçao na prescrição de antimicrobianos no Hospital Estadual Bauru (Bauru, São Paulo)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diagnose de falhas em sistemas rotativos com excitações desconhecidas, através da metodologia dos observadores de estado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)