Efficacy of NiTi rotary instruments in removing calcium hydroxide dressing residues from root canal walls

The aim of this study was to evaluate the efficacy of three rotary instrument systems (K3, ProTaper and Twisted File) in removing calcium hydroxide residues from root canal walls. Thirty-four human mandibular incisors were instrumented with the ProTaper System up to the F2 instrument, irrigated with 2.5% NaOCl followed by 17% EDTA, and filled with a calcium hydroxide intracanal dressing. After 7 days, the calcium hydroxide dressing was removed using the following rotary instruments: G1 - NiTi size 25, 0.06 taper, of the K3 System; G2 - NiTi F2, of the ProTaper System; or G3 - NiTi size 25, 0.06 taper, of the Twisted File System. The teeth were longitudinally grooved on the buccal and lingual root surfaces, split along their long axis, and their apical and cervical canal thirds were evaluated by SEM (×1000). The images were scored and the data were statistically analyzed using the Kruskall Wallis test. None of the instruments removed the calcium hydroxide dressing completely, either in the apical or cervical thirds, and no significant differences were observed among the rotary instruments tested (p > 0.05).

Comparison between gutta-percha and Resilon removal using two different techniques in endodontic retreatment

This study compared the remaining filling material and working time when removing gutta-percha/AH 26 and Resilon/Epiphany from root filled extracted teeth. The root fillings were removed using chloroform and two different rotary systems (K3 and Liberator files). The amount of residual filling material on the canal walls was imaged and measured using image analyzer software. The group filled with Resilon/Epiphany and retreated with K3 files demonstrated the least residual filling material on the walls (p < 0.05). There was no statistically significant difference between the guttapercha/AH26 and Resilon/Epiphany groups when the Liberator files were used (p > 0.05). In the groups filled with Resilon/Epiphany, the filling was removed faster than groups filled with gutta-percha/AH 26 (p < 0.05). K3 rotary system was faster than Liberator to remove both gutta-percha and Resilon (p < 0.05). Resilon/ Epiphany was effectively removed with K3 or Liberator rotary files.

Cone-beam computed tomography analysis of the apical third of curved roots after mechanical preparation with different automated systems

The present study evaluated by cone-beam computed tomography (CBCT) the apical canal transportation and centralizing ability of different automated systems after root canal preparation. The mesiobuccal canals of maxillary first molars (n=10 per group) were prepared with: GI - reciprocating system with K-Flexofile; GII - reciprocating system with NiTiFlex files; GIII - rotary system with K3 instruments; GIV - rotary system with RaCe instruments. CBCT scans were taken before and after biomechanical preparation up to a #40.02 diameter. Canal transportation was determined by measuring the smallest distance between the inner canal walls and the mesial and distal sides of the root. The centralization ability corresponded to the difference between the measurements from transportation evaluation, using the linear voxel to voxel method of analysis. The mean transportation was 0.06 ± 0.14 mm, with a tendency to deviate to the mesial side of the root (n=22), with no statistically significant difference among the groups (p=0.4153). The mean centralization index was 0.15 ± 0.65 also without statistically significant difference among the groups (p=0.0881). It may be concluded that apical canal transportation and centralization ability were not influenced by the type of mechanical movement and instruments used.

Calcium hydroxide intracanal dressing removal with different rotary instruments and irrigating solutions: A scanning electron microscopy study

This study evaluated the efficacy of 2 types of rotary instruments employed in association with sodium hypochlorite (NaOCl) or EDTA in removing calcium hydroxide (CH) residues from root canals dentin walls. Forty-two mandibular human incisors were instrumented with the ProTaper System up to F2 instrument, irrigated with 2.5% NaOCl followed by 17% EDTA and filled with a CH intracanal dressing. After 7 days, the CH dressing was removed using 4 techniques: NiTi rotary instrument size 25, 0.06 taper (K3 Endo) and irrigation with 17% EDTA (Group 1), NiTi rotary F1 instrument (ProTaper) and irrigation with 17% EDTA (Group 2), NiTi rotary instrument size 25, 0.06 taper and irrigation with 2.5% NaOCl (Group 3) and NiTi rotary F1 instrument and irrigation with 2.5% NaOCl (Group 4). Two roots without intracanal dressing were used as negative controls. Teeth were evaluated by scanning electron microscopy, in the cervical and apical canal thirds. None of the techniques removed the CH dressing completely. In the apical and cervical thirds, F1 instrument was better than instrument size 25, 0.06 taper in removing CH residues (p<0.05), regardless of the final irrigating solution. No difference was found between the irrigating solutions in the groups of F1 instrument and of instrument size 25, 0.06 taper (p>0.05). The negative controls had no CH residues on the dentin walls. In conclusion, the ProTaper F1 instrument was better than K3 Endo instrument size 25, 0.06 taper in the removal of CH intracanal medication, regardless of irrigating solution used.

Influência dos corantes Azul de Metileno a 2% e Rodamina B a 2% na determinação da capacidade seladora apical de diferentes cimentos endodônticos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da resistência à fratura torcional de diferentes instrumentos rotatórios de níquel-titânio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise radiográfica da modelagem de canais radiculares ovalados realizada com sistemas rotatórios de níquel-titânio

Pós-graduação em Odontologia - FOAR

Análise tomográfica Cone Beam e histológica do preparo do canal radicular com três sistemas rotatórios

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo comparativo do preparo do canal radicular de dentes artificiais utilizando diferentes técnicas automatizadas de instrumentação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação radiográfica, macroscópica e do tempo da remoção do material obturador do canal radicular por diferentes técnicas de retratamento

Pós-graduação em Odontologia - FOAR

Adubação mineral, orgânica e biodinâmica de yacon (Polymnia sonchifolia Poep & Endl): rendimento, qualidade e armazenamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produtividade e qualidade de frutos de melão pele de sapo em função de diferente níveis de irrigação e adubações nitrogenada e potássica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistência à fadiga cíclica de instrumentos rotatórios de níquel-titânio de diferentes características geométricas antes e após o uso

O objetivo do presente estudo foi avaliar a resistência à fadiga cíclica de instrumentos rotatórios de níquel-titânio de diferentes características geométricas, antes e após o uso em canais artificiais. Foram selecionadas limas rotatórias do Sistema Race (FKG Dentaire) e do Sistema K3 (SybronEndo) de conicidade 0,04, com 25mm de comprimento e diâmetro de ponta de 25, padrão ISO. As mesmas foram divididas em quatro grupos experimentais, com doze limas cada, totalizando quarenta e oito instrumentos. Os grupos foram assim divididos: grupo A0, instrumentos Race sem nenhum uso; grupo A5, instrumentos Race de cinco usos; grupo B0, instrumentos K3 de nenhum uso e grupo B5, instrumentos K3 de cinco usos. A simulação de uso foi realizada em canais artificiais de resina, com curvatura de 40° e raio de 5mm, utilizando uma peça de mão com contra-ângulo, acionado por motor elétrico, na velocidade de 350 rpm e 1 N/cm de torque. Todos os grupos foram submetidos a ensaios de fadiga cíclica num dispositivo que permitia o instrumento girar livremente, reproduzindo uma instrumentação rotatória num canal curvo. O tempo despendido até a fratura foi aferido por um cronômetro. Para avaliação estatística empregou-se o teste ANOVA para dois fatores e foi observada diferença estatisticamente significante entre as amostras. O teste de Tukey foi utilizado para verificar a diferença entre as médias dos grupos. Os resultados mostraram que o uso e a característica geométrica dos instrumentos influenciam na sua resistência à fadiga cíclica (p<0,05). As limas do grupo B0 (K3 sem nenhum uso) apresentaram maior resistência à fadiga, quando comparadas às limas dos demais grupos experimentais, independente do número de uso.

Avaliação da ação dos instrumentos nas paredes de dentina do terço apical de incisivos inferiores após diferentes técnicas de instrumentação: análise histológica

O presente trabalho teve por objetivo a avaliação da ação dos instrumentos nas paredes do terço apical do canal radicular a 1 e 3mm do CRT, em incisivos inferiores, após preparo com limas NiTi-Flex em rotação alternada, e contínua pelo uso dos sistemas de NiTi: K3, Race, Protaper. Para avaliação da limpeza se utilizou cortes histológicos, na qual a luz do canal foi dividida em quatro quadrantes de acordo com a face (DL, DV, ML, MV). Os resultados mostraram que de modo geral, os melhores resultados foram encontrados para a rotação alternada, sendo seguido pelo sistema Protaper (p<0,05). Os piores resultados foram encontrados para K3 (62,5% sujos), não havendo diferenças estatísticas àqueles encontrados para o sistema Race (45%). Na avaliação dos quadrantes, o mésio-lingual foi considerado o mais sujo para os dois níveis avaliados (p<0,05). Ao final, foi observado que nenhuma das técnicas testadas foi capaz de limpar com efetividade as paredes dos canais radiculares de incisivos inferiores.

Simulação numérica de fluxo de águas subterrâneas na bacia do Rio Grande (BA)

The Urucuia Aquifer System represents a strategic water source in western Bahia. Its baseflow is responsible for the flow rate of the main tributaries of São Francisco river left bank in the dry season, including the Rio Grande, its main tributary in Bahia state. This river has a hydrological regime heavily affected by groundwater and is located in a region with conflicts about water resources. The aquifers geology is constituted by neocretacious sandstones of Urucuia Group subdivided in Posse Formation and Serra das Araras Formation. The embasement is formed by neoproterozoic rocks of Bambuí Group. This work focuses on an important tool application, the mathematical model, whose function is represent approximately and suitably the reality so that can assist in different scenarios simulations and make predictions. Many studies developed in this basin provided the conceptual model basis including a full free aquifer, lithological and hydraulical homogeneity in entire basin, null flux at plateau borders and aquifer base. The finite element method is the numerical method used and FEFLOW the computational algorithm. The simulated area was discretized in a single layer with 27.357,6 km² (314.432 elements and 320.452 nodes) totaling a 4.249,89 km³ volume. Were utilized 21 observation wells from CERB to calibrate the model. The terrain topography was obtained by SRTM data and the impermeable base was generated by interpolation of descriptive profiles from wells and electric vertical drilling from previous studies. Works in this area obtained mean recharge rates varying approximately from 20% to 25% of average precipitation, thus the values of model recharge zones varying in this range. Were distributed 4 hydraulic conductivity zones: (K1) west zone with K=6x10-5 m/s; (K2) center-east zone with K=3x10-4 m/s; (K3) far east zone with K=5x10-4 m/s; e (K4) east-north zone with K=1x10-5 m/s. Thereby was incorporated to the final conceptual model...