Spinal inflammation in the absence of sacroiliac joint inflammation on magnetic resonance imaging in patients with active nonradiographic axial spondyloarthritis

Objective: To evaluate the presence of spinal inflammation with and without sacroiliac (SI) joint inflammation on magnetic resonance imaging (MRI) in patients with active nonradiographic axial spondyloarthritis (SpA), and to compare the disease characteristics of these subgroups. Methods: ABILITY-1 is a multicenter, randomized, controlled trial of adalimumab versus placebo in patients with nonradiographic axial SpA classified using the Assessment of SpondyloArthritis international Society axial SpA criteria. Baseline MRIs were centrally scored independently by 2 readers using the Spondyloarthritis Research Consortium of Canada (SPARCC) method for the SI joints and the SPARCC 6-discovertebral unit method for the spine. Positive evidence of inflammation on MRI was defined as a SPARCC score of >2 for either the SI joints or the spine. Results: Among patients with baseline SPARCC scores, 40% had an SI joint score of >2 and 52% had a spine score of >2. Forty-nine percent of patients with baseline SI joint scores of <2, and 58% of those with baseline SI joint scores of >2, had a spine score of >2. Comparison of baseline disease characteristics by baseline SI joint and spine scores showed that a greater proportion of patients in the subgroup with a baseline SPARCC score of >2 for both SI joints and spine were male, and patients with spine and SI joint scores of <2 were younger and had shorter symptom duration. SPARCC spine scores correlated with baseline symptom duration, and SI joint scores correlated negatively with the baseline Bath Ankylosing Spondylitis Disease Activity Index, but neither correlated with the baseline Ankylosing Spondylitis Disease Activity Score, total back pain, the patient's global assessment of disease activity, the Bath Ankylosing Spondylitis Functional Index, morning stiffness, nocturnal pain, or C-reactive protein level. Conclusion: Assessment by experienced readers showed that spinal inflammation on MRI might be observed in half of patients with nonradiographic axial SpA without SI joint inflammation.

Fate of applied biosolids nitrogen in a cut and remove forage system on an alluvial clay loam soil

The fate of nitrogen (N) applied in biosolids was investigated in a forage production system on an alluvial clay loam soil in south-eastern Queensland, Australia. Biosolids were applied in October 2002 at rates of 6, 12, 36, and 54dryt/ha for aerobically digested biosolids (AE) and 8, 16, 48, and 72dryt/ha for anaerobically digested biosolids (AN). Rates were based on multiples of the Nitrogen Limited Biosolids Application rate (0.5, 1, 3, and 4.5NLBAR) for each type of biosolid. The experiment included an unfertilised control and a fertilised control that received multiple applications of synthetic fertiliser. Forage sorghum was planted 1 week after biosolids application and harvested 4 times between December 2002 and May 2003. Dry matter production was significantly greater from the biosolids-treated plots (21-27t/ha) than from the unfertilised (16t/ha) and fertilised (18t/ha) controls. The harvested plant material removed an extra 148-488kg N from the biosolids-treated plots. Partial N budgets were calculated for the 1NLBAR and 4.5NLBAR treatments for each biosolids type at the end of the crop season. Crop removal only accounted for 25-33% of the applied N in the 1NLBAR treatments and as low as 8-15% with 4.5NLBAR. Residual biosolids N was predominantly in the form of organic N (38-51% of applied biosolids N), although there was also a significant proportion (10-23%) as NO3-N, predominantly in the top 0.90m of the soil profile. From 12 to 29% of applied N was unaccounted for, and presumed to be lost as gaseous nitrogen and/or ammonia, as a consequence of volatilisation or denitrification, respectively. In-season mineralisation of organic N in biosolids was 43-59% of the applied organic N, which was much greater than the 15% (AN)-25% (AE) expected, based on current NLBAR calculation methods. Excessive biosolids application produced little additional biomass but led to high soil mineral N concentrations that were vulnerable to multiple loss pathways. Queensland Guidelines need to account for higher rates of mineralisation and losses via denitrification and volatilisation and should therefore encourage lower application rates to achieve optimal plant growth and minimise the potential for detrimental impacts on the environment.

Effect of micro-propagation on the health status of strawberry planting material for commercial production of strawberry runners for Queensland

Plant tissue culture has been used for a number of years to produce micropropagated strawberry plants for planting into runner growing beds in the Stanthorpe (Queensland) and Bothwell (Tasmania) regions. This process has allowed the rapid release of new cultivars from the LAWS (Late Autumn, Winter, Spring) breeding program into the current runner production system. Micro-propagation in vitro allows plants to be produced during the autumn and winter months, when mother plants would normally be in a fruit production phase in the field in Queensland. The plants produced are of a high health status when they are planted. The subsequent arrival and build up of various diseases in the runner fields are closely monitored. Using tissue culture for the first generation reduces the time the plants spend in the field by twelve months, reducing disease incidence. To date, any disease outbreak has been successfully managed using early detection and rapid response methods.

Egg production in furnished cages

In the European Union, conventional cages for laying hens will be faded out at the beginning of 2012. The rationale behind this is a public concern over animal welfare in egg production. As alternatives to conventional cages, the European Union Council Directive 1999/74/EC allows non-cage systems and enriched (furnished) cages. Layer performance, behavior, and welfare in differently sized furnished cages have been investigated quite widely during recent decades, but nutrition of hens in this production system has received less attention. This thesis aims to compare production and feed intake of laying hens in furnished and conventional cages and to study the effects of different dietary treatments in these production systems, thus contributing to the general knowledge of furnished cages as an egg production system. A furnished cage model for 8 hens was compared with a 3-hen conventional cage. Three consecutive experiments each studied one aspect of layer diet: The first experiment investigated the effects of dietary protein/energy ratio, the second dietary energy levels, and the third the effects of extra limestone supplementation. In addition, a fourth experiment evaluated the effects of perches on feed consumption and behavior of hens in furnished cages. The dietary treatments in experiments 1 3 generally had similar effects in the two cage types. Thus, there was no evidence supporting a change in nutrient requirements for laying hens when conventional cages are replaced with small-group furnished cages. Moreover, the results from nutritional experiments conducted in conventional cages can be applied to small-group furnished cage systems. These results support the view that production performance comparable with conventional cages can be achieved in furnished cages. All of the advantages of cages for bird welfare are sustained in the small-group furnished cages used here. In addition, frequent use of perches and nests implies a wider behavioral repertoire in furnished cages than in conventional cages. The increase observed in bone ash content may improve bird welfare in furnished cages. The presence of perches diminished feed consumption during the prelaying period and enhanced the feed conversion ratio during the early laying period in furnished cages. However, as the presence or absence of perches in furnished cages had no significant effect on feed consumption after the prelaying period, the lower feed consumption observed in furnished cages than in conventional cages could be attributed to other factors, such as the presence of wood shavings or a nest box. The wider feed trough space per hen in conventional than in furnished cages may partly explain the higher feed consumption observed in conventional cages.

Rearing strategies of young dairy calves in relation to production, behaviour and welfare

Vasikoiden kasvatus yksilökarsinoissa, imemismahdollisuuden puute maitojuoton yhteydessä sekä pienet juomamäärät ovat tekijöitä, jotka mahdollisesti voivat vähentää vasikoiden hyvinvointia. Vasikoiden kasvatukseen etsitäänkin uusia tapoja, joissa eläinten käyttäytymistarpeet ja hyvinvointi otetaan entistä paremmin huomioon. Tässä väitöskirjassa vasikoiden kasvatusta on tarkasteltu sekä tuotannon että vasikoiden käyttäytymisen ja hyvinvoinnin kannalta. Väitöskirja koostuu kolmesta kokeesta, joista ensimmäisessä tutkittiin vasikoiden kasvatusta ryhmäkarsinoissa ulkona tai sisällä ja vasikoiden kasvatusta sisällä ryhmä- tai yksilökarsinoissa. Toisessa kokeessa vasikoiden annettiin imeä emiään rajoitetusti lypsyn jälkeen viiden tai kahdeksan viikon ajan ja kolmannessa selvitettiin vasikoiden veden juontia, kun vasikat saivat juomarehua vapaasti. Lisäksi kokeiden yhdistetystä aineistosta analysoitiin eri rehujen syöntimäärien suhdetta sekä rehujen vaikutusta kasvuun ennen ja jälkeen maidosta vieroituksen. Tutkimuksessa todettiin, että vasikoita voi ryhmässä kasvattaa kylmissä ja vaihtelevissa sääoloissa ulkona, kunhan ne hoidetaan ja ruokitaan erittäin huolellisesti. Kylmällä ilmalla vasikat saattavat kuitenkin syödä väkirehua vähemmän varsinkin, jos ruokailupaikka on ulkona ja makuualue sisällä. Ryhmässä kasvaneet vasikat aloittivat sekä kuivien rehujen syönnin että märehtimisen nuorempina kuin yksilökarsinassa kasvaneet. Ryhmissä esiintyvää käyttäytymisongelmaa, toisten vasikoiden imemistä, voidaan vähentää hoito- ja ruokintamenetelmillä. Annettaessa vasikoiden imeä emiään rajoitetusti lypsyn jälkeen vasikat oppivat imemään emiään hyvin nopeasti. Lypsytyö vaikeutui muutamien lehmien kohdalla, sillä ne pidättivät maitoa lypsettäessä. Saadessaan imeä rajoitetusti vasikat imivät suurehkoja maitomääriä kerrallaan. Vieroittaminen suurilta maitomääriltä viiden viikon iässä oli kuitenkin liian aikaista, koska vasikat eivät vielä syöneet riittävästi kuivia rehuja. Vieroitus emästä niin viiden kuin kahdeksankin viikon iässä aiheutti vasikoissa levottomuutta ja ääntelyn lisääntymistä. Saadessaan hapatettua juomarehua vapaasti vasikat joivat keskimäärin vain vähän vettä, olipa vesilähteenä avoin ämpäri tai vesinippa. Vasikoiden välillä oli suurta vaihtelua veden juontimäärissä. Viikkoa ennen maidosta vieroitusta vasikat joivat 0-3 l vettä päivässä. Vasikat joivat nipasta kerrallaan vähemmän vettä kuin ämpäristä, ja käyttivät enemmän aikaa päivässä veden juomiseen kuin vesiämpäristä juoneet vasikat. Suurin osa vasikoista joi vettä juomanipoista erikoisella tavalla esimerkiksi painamalla nippaa otsalla ja juomalla tippuvaa vettä. Vesinipat voivat olla siis vasikoille joko vaikeita tai epämukavia käyttää. Vasikoiden juoman maitomäärän lisääntyessä kasvu lisääntyy selvästi. Runsas maidon juominen vähentää kuitenkin kuivien rehujen syöntiä ja vieroitusvaiheessa kasvu voi hidastua. Vasikat olisikin tärkeää vieroittaa vähitellen, ettei muutoksia kasvuun tulisi. Syönti- ja kasvutulokset eivät aina anna oikeaa kuvaa kasvatusmenetelmien eroista eläinten hyvinvoinnin kannalta. Käyttäytyminen on herkkä hyvinvoinnin mittari ja se tulisikin aina huomioida eri kasvatusmenetelmiä arvioitaessa. .

Description of the pig production systems, biosecurity practices and herd health providers in two provinces with high swine density in the Philippines

A cross-sectional study was conducted between October 2011 and March 2012 in two major pig producing provinces in the Philippines. Four hundred and seventy one pig farms slaughtering finisher pigs at government operated abattoirs participated in this study. The objectives of this study were to group: (a) smallholder (S) and commercial (C) production systems into patterns according to their herd health providers (HHPs), and obtain descriptive information about the grouped S and C production systems; and (b) identify key HHPs within each production system using social network analysis. On-farm veterinarians, private consultants, pharmaceutical company representatives, government veterinarians, livestock and agricultural technicians, and agricultural supply stores were found to be actively interacting with pig farmers. Four clusters were identified based on production system and their choice of HHPs. Differences in management and biosecurity practices were found between S and C clusters. Private HHPs provided a service to larger C and some larger S farms, and have little or no interaction with the other HHPs. Government HHPs provided herd health service mainly to S farms and small C farms. Agricultural supply stores were identified as a dominant solitary HHP and provided herd health services to the majority of farmers. Increased knowledge of the routine management and biosecurity practices of S and C farmers and the key HHPs that are likely to be associated with those practices would be of value as this information could be used to inform a risk-based approach to disease surveillance and control. © 2014 Elsevier B.V.

Optimizing Hill Seeding Density for High-Yielding Hybrid Rice in a Single Rice Cropping System in South China

Mechanical hill direct seeding of hybrid rice could be the way to solve the problems of high seeding rates and uneven plant establishment now faced in direct seeded rice; however, it is not clear what the optimum hill seeding density should be for high-yielding hybrid rice in the single-season rice production system. Experiments were conducted in 2010 and 2011 to determine the effects of hill seeding density (25 cm 615 cm, 25 cm 617 cm, 25 cm 619 cm, 25 cm 621 cm, and 25 cm 623 cm; three to five seeds per hill) on plant growth and grain yield of a hybrid variety, Nei2you6, in two fields with different fertility (soil fertility 1 and 2). In addition, in 2012 and 2013, comparisons among mechanical hill seeding, broadcasting, and transplanting were conducted with three hybrid varieties to evaluate the optimum seeding density. With increases in seeding spacing from 25 cm615 cm to 25 cm623 cm, productive tillers per hill increased by 34.2% and 50.0% in soil fertility 1 and 2. Panicles per m2 declined with increases in seeding spacing in soil fertility 1. In soil fertility 2, no difference in panicles per m2 was found at spacing ranging from 25 cm617 cm to 25 cm623 cm, while decreases in the area of the top three leaves and aboveground dry weight per shoot at flowering were observed. Grain yield was the maximum at 25 cm 617 cm spacing in both soil fertility fields. Our results suggest that a seeding density of 25 cm617 cm was suitable for high-yielding hybrid rice. These results were verified through on-farm demonstration experiments, in which mechanical hill-seeded rice at this density had equal or higher grain yield than transplanted rice

Some potential occupational and environmental hazards associated with fish pond production in Nigeria

The paper highlights the concept of information and the significance of environmental and occupational hazards associated with pond fish production in Nigeria and discuss the possible options for the ways forward. The major raw material used in fish production system is the organic manure (cow dung, poultry droppings, porcine manure etc) that serves as substrate for heterotrophic production of bacteria and protozoa, which act as food for zooplankton and the fish. The pathogenic organisms (viruses, bacteria, protozoa's, and parasites), are noted for the potential hazard to the fish handlers and consumers. Nine species from seven genera of bacteria associated with fish diseases are found to have association with diseases of human such as typhoid fever, bacillary dysentery and other gastrointestinal tract related problems. Also the environmental contaminants in pond fish production become important because of its significance to consumers' acceptance of the fish products

Avaliação de catalisadores à base de estanho visando à produção de biodiesel

Atualmente, existe um crescente interesse por fontes de energia renováveis e o desenvolvimento de novas tecnologias para a produção de biocombustíveis. O biodiesel é uma fonte alternativa de combustível bastante atrativa em relação ao diesel em decorrência de seus benefícios ambientais. A obtenção de biodiesel é geralmente realizada através de reações de transesterificação de óleos vegetais com álcool de cadeia curta. Entretanto, também se pode produzi-lo através da esterificação de ácidos graxos livres utilizando-se matérias-primas de baixa qualidade como rejeitos industriais, domésticos ou gorduras animais. O estudo de catalisadores que melhorem os resultados destas reações tem importante papel no desenvolvimento da produção de biodiesel. Normalmente, utilizam-se catalisadores básicos como o NaOH, nas reações de transesterificação. No entanto, o uso destes catalisadores causa impactos ambientais, além de promover a reação de saponificação quando a matéria-prima apresenta teores significativos de acidez, reduzindo o rendimento e dificultando a separação de fases. Este trabalho apresenta o estudo de catalisadores ácidos, à base de estanho, com ênfase especial no sulfato de estanho II, voltados para utilização na reação de esterificação de cargas contendo elevados teores em ácidos graxos. Avaliou-se a influência das variáveis: temperatura, concentração do catalisador, tipo de sistema reacional, quantidade de etanol, tipo de álcool, acidez, natureza dos ácidos graxos e temperatura de calcinação. Uma comparação entre os catalisadores, a questão da reutilização do catalisador e das mudanças proporcionadas pelo tratamento térmico ao qual foram submetidos também foram analisadas. Dentre os catalisadores estudados, os de sulfato de estanho mostraram maior atividade catalítica frente à reação estudada, os mais promissores sendo os calcinados até a temperatura de 500C. O principal motivo para os altos rendimentos encontrados foi associado ao comportamento pseudo-homogêneo do SnSO4, que se solubiliza, acidificando o meio reacional durante as reações de esterificação

Assessing the responsiveness of existing production operations

Production responsiveness refers to the ability of a production system to achieve its operational goals in the presence of supplier, internal and customer disturbances, where disturbances are those sources of change which occur independently of the system's intentions. A set of audit tools for assessing the responsiveness of production operations is being prepared as part of an EPSRC funded investigation. These tools are based on the idea that the ability to respond is linked to: the nature of the disturbances or changes requiring a response; their impact on production goals; and the inherent response capabilities of the operation. These response capabilities include information gathering and processing (to detect disturbances and production conditions), decision processes (which initiate system responses to disturbances) and various types of process flexibilities and buffers (which provide the physical means of dealing with disturbances). The paper discusses concepts and issues associated with production responsiveness, describes the audit tools that have been developed and illustrates their use in the context of a steel manufacturing plant.

Effects of periphyton grown on bamboo substrates on growth and production of Indian major carp, rohu (Label rohita Ham.)

The effects of periphyton, grown on bamboo substrates, on growth and production of Indian major carp, rohu, Labeo rohita (Hamilton), were studied in 10 ponds during July to October '95 at the Bangladesh Agricultural University, Mymensingh. Five ponds were provided with bamboo substrates (treatment I) and the rests without bamboo substrates (treatment II). It was revealed that there had been no discernible difference in the water quality parameters between treatments. A large number of plankton (30 genera) showed periphytic nature and colonized on the bamboo substrates. The growth and production of fish was significantly (p<0.05) higher in the ponds with bamboo substrates as compared to the ponds without substrates. The net production of rohu in treatment I was about 1.7 times higher than that of treatment II. Fish production was as much as 1899 kg/ha over a culture period of 4 months in the periphyton-based production system.

Growth and production of Nile tilapia (Oreochromis niloticus Lin.) in irrigated Boro rice under floodplain environment

The experiment was conducted at BRRI Regional Station, Habiganj during 1994-95 to evaluate the growth and economic performance of Nile tilapia, Oreochromis niloticus, fish reared in the field of irrigated boro rice with different fertilizer levels. Grain yield of rice was not affected by fish culture. It was observed that 50% of recommended fertilizer was enough to produce increased rice yield (8-10 t/ha) at floodplain environment and additional yield was obtained with the increasing fertilizer rates. Results further indicated that O. niloticus could successfully be reared in the field of irrigated boro rice with recommended fertilizer level. Larger size of fingerlings at release had improved recovery percent, body weight gain and higher fish yield. Results also revealed that rice + fish production system produced higher net return than the system with rice alone.

Training and assignment of multi-skilled workers for implementing seru production systems

Confronted with high variety and low volume market demands, many companies, especially the Japanese electronics manufacturing companies, have reconfigured their conveyor assembly lines and adopted seru production systems. Seru production system is a new type of work-cell-based manufacturing system. A lot of successful practices and experience show that seru production system can gain considerable flexibility of job shop and high efficiency of conveyor assembly line. In implementing seru production, the multi-skilled worker is the most important precondition, and some issues about multi-skilled workers are central and foremost. In this paper, we investigate the training and assignment problem of workers when a conveyor assembly line is entirely reconfigured into several serus. We formulate a mathematical model with double objectives which aim to minimize the total training cost and to balance the total processing times among multi-skilled workers in each seru. To obtain the satisfied task-to-worker training plan and worker-to-seru assignment plan, a three-stage heuristic algorithm with nine steps is developed to solve this mathematical model. Then, several computational cases are taken and computed by MATLAB programming. The computation and analysis results validate the performances of the proposed mathematical model and heuristic algorithm. © 2013 Springer-Verlag London.

Production planning of multi-stage multi-option seru production systems with sustainable measures

With the concerns over climate change and the escalation in worldwide population, sustainable development attracts more and more attention of academia, policy makers, and businesses in countries. Sustainable manufacturing is an inextricable measure to achieve sustainable development since manufacturing is one of the main energy consumers and greenhouse gas contributors. In the previous researches on production planning of manufacturing systems, environmental factor was rarely considered. This paper investigates the production planning problem under the performance measures of economy and environment with respect to seru production systems, a new manufacturing system praised as Double E (ecology and economy) in Japanese manufacturing industries. We propose a mathematical model with two objectives minimizing carbon dioxide emission and makespan for processing all product types by a seru production system. To solve this mathematical model, we develop an algorithm based on the non-dominated sorting genetic algorithm II. The computation results and analysis of three numeral examples confirm the effectiveness of our proposed algorithm. © 2014 Elsevier Ltd. All rights reserved.

A study on the economic efficiency of hydrogen production from biomass residues in China

As part of Pilot Project of KIP of CAS, a feasibility study of hydrogen production system using biomass residues is conducted. This study is based on a process of oxygen-rich air gasification of biomass in a downdraft gasifier plus CO-shift. The capacity of this system is 6.4 t biomass/d. Applying this system, it is expected that an annual production of 480 billion N m(3) H-2 will be generated for domestic supply in China. The capital cost of the plant used in this study is 1328$/(N m(3)/h) H-2 out, and product supply cost is 0.15$/N m(3) H-2. The cost sensitivity analysis on this system tells that electricity and catalyst cost are the two most important factors to influence hydrogen production cost.