Teleconsultation/telediagnosis using teledentistry technology: a pilot feasibility study

This study assessed the feasibility of ateledentistry model for teleconsultation and telediagnosis inResidential Aged Care Facilities. Study feasibility was definedby the ability to develop remote treatment plans. Reliability ofthe remote assessments was assessed by comparing with thoseperformed by traditional face-to-face oral examinations. Anintraoral camera was operated by trained teledentistryassistants with the aim of screening residents for oral diseasesand pathological conditions. The model was supported bytraning and an instructional kit for the introral cameraoperators. The structure, content and delivery of the program,was evaluated. Residents’ views about the structure, contentand delivery of the program were also evaluated. A total of 50residents participated in this assessment. Results indicated thatthe proposed teledentistry approach for oral health screeningis feasible and reliable as an alternative to traditional oralhealth examination. Residents expressed high levels ofsatisfaction with the teledentistry service. This study providesan innovative solution towards closing the service delivery gapin the provision of sustainable oral health care services tounderserviced populations (e.g., nursing homes, rural areas).

Lesões de cárie em esmalte submetidas a diferentes tratamentos com flúor tópico in situ

O presente estudo teve por objetivo avaliar se a aplicação tópica de flúor fosfato acidulado (FFA) em alta concentração tem efeito adicional no controle de lesões de esmalte, comparado ao uso de dentifrício fluoretado (baixa concentração). A freqüência de FFA como auxiliar no tratamento de lesões de cárie e a deposição de flúor no esmalte após diferentes aplicações de flúor am alta e baixa concentração também foram avaliadas. Para tanto, 5 indivíduos utilizaram, por 42 dias, próteses parciais removíveis inferiores contendo blocos de esmalte bovino desmineralizados. Os espécimes de esmalte forma divididos em 5 grupos: (1) escovação 3 vezes ao dia com dentifrício fluoretado (DF) (1100 ppm F), (2) DF+1 aplicação tópica FFA (12300 ppm F), (3) DF+2 FFA, (4) DF+3 FFA, e 5) DF+4 FFA. O intervalo entre as aplicações foi de uma semana. Cinco blocos hígidos e 5 blocos desmineralizados foram utilizados como controle e não foram submetidos ao período intraoral. As alterações clínicas foram registradas com relação à textura, coloração e brilho superficiais. Análises de microdureza superficial (MS) e em cortes longitudinais (MCL), de rugosidade superficial (RS) e de conteúdo de flúor depositado no esmalte foram realizadas. Modificações clínicas semelhantes de coloração foram observadas em todos os grupos após formação da lesão in vitro, apesar da ausência de mudanças na textura e brilho superficiais. Após escovação e tratamento com flúor, todos os blocos desmineralizados (esbranquiçados), independentemente do tratamento, tornaram-se mais amarelados. Não foram detectadas mudanças na textura e brilho superficiais. Os valores de MS e de conteúdo de flúor aumentaram (p<0,05) em relação aos blocos demineralizados somente a partir de 2 FFA. Os valores de MCL não mostraram diferenças entre os blocos tratados e os desmineralizados em qualquer distância da superfície do esmalte. Os grupos DF+3 FFA e DF+ 4 FFA foram os únicos capazes de aumentar os valores de MS em relação aos blocos desmineralizados. Estes tratamentos levaram a um aumento significativo de flúor solúvel e insolúvel comparado aos espécimes hígidos e desmineralizados. Ainda que todas as lesões tenham sido controladas clinicamente e não mostrem diferenças de microdureza, parece que aquelas tratadas com maior número de FFA produziram um maior reservatório de flúor disponível para inibir novos processos de desmineralização.

Câncer de boca e orofaringe: tendências e análise de sobrevida em Natal (RN)

Introduction: Mouth cancer is classified as having one of the ten highest cancer incidences in the world. In Brazil, the incidence and mortality rates of oral cancer are among the highest in the world. Intraoral cancer (tongue, gum, floor of the mouth, and other non-specified parts of the mouth), the accumulated survival rate after five years is less than 50%. Objectives: Estimate the accumulated survival probability after five years and adjust the Cox regression model for mouth and oropharyngeal cancers, according to age range, sex, morphology, and location, for the city of Natal. Describe the mortality and incidence coefficients of oral and oropharyngeal cancer and their tendencies in the city of Natal, between 1980 and 2001 and between 1997 and 2001, respectively. Methods: Survival data of patients registered between 1997 and 2001 was obtained from the Population-based Cancer Record of Natal. Differences between the survival curves were tested using the log-rank test. The Cox proportional risk model was used to estimate risk ratios. The simple linear regression model was used for tendency analyses of the mortality and incidence coefficients. Results: The probability after five years was 22.9%. The patients with undifferentiated malignant neoplasia were 4.7 times more at risk of dying than those with epidermoid carcinoma, whereas the patients with oropharyngeal cancer had 2.0 times more at risk of dying than those with mouth cancer. The mouth cancer mortality and incidence coefficients for Natal were 4.3 and 2.9 per 100 000 inhabitants, respectively. The oropharyngeal cancer mortality and incidence coefficients were, respectively, 1.1 and 0.7 per 100 000 87 inhabitants. Conclusions: A low survival rate after five years was identified. Patients with oropharyngeal cancer had a greater risk of dying, independent of the factors considered in this study. Also independent of other factors, undifferentiated malignant neoplasia posed a greater risk of death. The magnitudes of the incidence coefficients found are not considered elevated, whereas the magnitudes of the mortality coefficients are high

Debris, Roughness and Friction of Stainless Steel Archwires Following Clinical Use

Objective: To investigate the degree of debris, roughness, and friction of stainless steel orthodontic archwires before and after clinical use.Materials and Methods: For eight individuals, two sets of three brackets (n = 16) each were bonded from the first molar to the first premolar. A passive segment of 0.019- x 0.025-inch stainless steel archwire was inserted into the brackets and tied by elastomeric ligature. Debris level (via scanning electron microscopy), roughness, and frictional force were evaluated as-received and after 8 weeks of intraoral exposure. Mann-Whitney, Wilcoxon signed-rank, and Spearman correlation tests were used for statistical analysis at the .05 level of significance.Results: There were significant increases in the level of debris (P = .0004), roughness of orthodontic wires (P = .002), and friction (P = .0001) after intraoral exposure. Significant positive correlations (P < .05) were observed between these three variables.Conclusion: Stainless steel rectangular wires, when exposed to the intraoral environment for 8 weeks, showed a significant increase in the degree of debris and surface roughness, causing an increase in friction between the wire and bracket during the mechanics of sliding. (Angle Orthod. 2010;80:521-527.)

Nasoendoscopy of velopharynx before and during diagnostic therapy

Nasoendoscopy is an important tool for assessing velopharyngeal function. The purpose of this study was to analyze velar and pharyngeal wall movement and velopharyngeal gap during nasoendoscopic evaluation of the velopharynx before and during diagnostic therapy. Nasoendoscopic recordings of 10 children with operated cleft lip and palate were analyzed according to the International Working Group Guidelines. Ratings of movement of velum and pharyngeal walls, and size, location and shape of gaps were analyzed by 3 speech-language pathologists (SLPs). Imaging was obtained during repetitions of the syllable /pa/ during a single nasoendoscopic evaluation: (a) before diagnostic therapy, and (b) after the children were instructed to impound and increase intraoral air pressure (diagnostic therapy). Once the patients impounded and directed air pressure orally, the displacement of the velum, right, left and posterior pharyngeal walls increased 40, 70, 80, and 10%, respectively. Statistical significance for displacement was found only for right and left lateral pharyngeal walls. Reduction in gap size was observed for 30% of the patients and other 40% of the gaps disappeared. Changes in gap size were found to be statistically significant between the two conditions. In nasoendoscopic assessment, the full potential of velopharyngeal displacement may not be completely elicited when the patient is asked only to repeat a speech stimulus. Optimization of information can be done with the use of diagnostic therapy's strategies to manipulate VP function. Assuring the participation of the SLP to conduct diagnostic therapy is essential for management of velopharyngeal dysfunction.

Low-level laser therapy on the treatment of oral and cutaneous pemphigus vulgaris: case report

Pemphigus vulgaris is a chronic autoimmune mucocutaneous disease that initially is manifested by painful intraoral erosions and ulcers which spread to other mucosa and the skin, generally more than 5 months after oral lesion manifestation. The treatment consists of prednisone alone or in combination with an immunosuppressive agent, and the clinical response is perceived within 2 to 4 weeks. Low-level laser therapy has been effective in accelerating the healing of injured tissue, thus inducing cell proliferation and increasing ATP, nucleic acid, and collagen synthesis. We reported two cases of pemphigus vulgaris that received systemic treatment associated with low-level laser therapy for oral and cutaneous lesions. We observed prompt analgesic effect in oral lesions and accelerated healing of oral and cutaneous wounds. Therefore, the present report suggests LLLT as a noninvasive technique that should be considered as an adjuvant therapy in oral and skin disorders in patients with PV.

Rapid Prototyping applied to surgical planning for correcting craniofacial malformations in wild animals. A case study of a brazilian fox

Veterinary surgery for treatment of wild animals is becoming an increasingly demanding task because it involves animals of different anatomy, many of them are already stressed and treatment must be performed to the highest standard in the minimum period of time. Craniofacial alterations may occur for three main reasons: genetic, functional or a combination of both. It is possible to modify the functional cause using intraoral devices like inclined plane. The treatment planning can be made based on virtual 3D models and rapid prototyping. An approximately 9 months old, 3.7 kg male Brazilian fox (Lycalopex vetulus) was referred to the Veterinary Hospital. Physical examination showed malocclusion with a deviation of the mandible to the right side. The virtual 3D model of the head was generated based on CT image data. The 3D models and rapid prototyping opened up new possibilities for the surgical planning and treatment of wild animals.

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

The aims of this study were to develop a dental chart evaluate any oral cavity disease, develop gypsum models the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented with various dental abnormalities as follows: dental plaque (71.4 %), gingivitis (71.4 %), periodontitis (57.1 %), dental stain (42.9 %), dental abrasion (57.1 %), dental fracture (57.1 %), pulp exposure (42.9 %), malocclusion (5 7.1 %) and supernumerary teeth (14.2 %).

Foreign Body in Preauricular Region

Foreign bodies, although they are often found throughout the body, to a lesser degree in the face, still constitute a diagnostic challenge for the trauma surgeon. Its removal means danger of damaging important facial anatomic structures, even if its exact position from the image data was known. So, the objective is to describe a clinical report of a patient (42 years of age, male sex) who experienced falling to the ground, attended by the Department of Surgery and Traumatology Bucco-Maxillo-Facial Surgery, Faculty of Dentistry of Aracatuba, São Paulo State University, and 2 days after the trauma, he reported difficulty in mouth opening and pain. After clinical evaluation, we observed the presence of injury in the left preauricular region already in the process of healing. During the intraoral physical examination, a limitation of the mouth opening was noted. Radiographic posteroanterior and profile of the face showed 2 radiopaque foreign bodies in the left side, lying apparently at the region of the mandibular condylar process. Under local anesthesia, foreign body removal was carried from there with access to it through the preexisting facial injury. Further clinical examinations showed an improvement in mouth opening, absence of pain complaints, and/or functional complaints.

Use of 4 Immediately Loaded Zygomatic Fixtures for Retreatment of Atrophic Edentulous Maxilla After Complications of Maxillary Reconstruction

This article reports the 20-month clinical outcome of the use of 4 zygomatic implants with immediate occlusal loading and reverse planning for the retreatment of atrophic edentulous maxilla after failed rehabilitation with autogenous bone graft reconstruction and maxillary implants. The intraoral clinical examination revealed mispositioned and loosened implants underneath a maxillary complete denture. The panoramic radiograph showed 6 maxillary implants. One implant was displaced into the right maxillary sinus, and the implant anchored in the region of tooth 21 was fractured. The other implants presented peri-implant bone loss. The implants anchored in the regions of teeth 21 to 23 and 11 to 13 were first removed. After 2 months, the reverse planning started with placement of 4 zygomatic fixtures, removal of the implants migrated into the sinus cavity and anchored in the region of tooth 17, and installation of a fixed denture. After 20 months of follow-up, no painful symptoms, peri-implant inflammation or infection, implant instability, or bone resorption was observed. The outcomes of this case confirm that the zygoma can offer a predictable anchorage and support function for a fixed denture in severely resorbed maxillae.

Technique for Indexing an Immediate Loading Implant Position for a Provisional Restoration

The transfer of an intraoral implant position to the cast for an immediate loading implant is an important step and may be difficult to achieve with commonly used transfer and impression methods. Thus, the purpose of this report is to describe a technique for the use of a surgical template to transfer the implant position for fabrication of a provisional restoration. This technique simplifies the procedure, eliminates the need for taking an impression, avoids surgical site contamination, and maintains an adequate emergence profile during fabrication of the definitive restoration. An indexing technique for transferring the position of the implant from the treated surface after extraction is described.

Optical Impression Systems for CAD-CAM Restorations

Computer-aided design/computer-aided manufacturing images can be taken through either direct or indirect imaging. For the indirect systems, the digitalization is obtained from the impression material or cast, and for the direct ones the image is taken directly from the mouth using intraoral scanners.The direct acquisition systems have been constantly improved because these are less invasive, quicker, and more precise than the conventional method. Besides, the digital images can be easily stored for a long time. Therefore, the aim of this paper was to describe and discuss based on the literature the main direct image acquisition systems available on the market: CEREC Bluecam (Sirona), Lava C.O.S. System (3M ESPE), iTero System (Cadent/Straumann), and E4D System (D4D Technologies).

Effect of salivary stimulation on erosion of human and bovine enamel subjected or not to subsequent abrasion: An in situ/ex vivo study

This in situ/ex vivo study evaluated whether saliva stimulated by chewing gum could prevent or reduce the wear and the percent change in microhardness (%SMH) of bovine and human enamel submitted to erosion followed by brushing abrasion immediately or after 1 h. During 2 experimental 7-day crossover phases, 9 previously selected volunteers wore intraoral palatal devices, with 12 enamel specimens (6 human and 6 bovine). In the first phase, the volunteers immersed the device for 5 min in 150 ml of cola drink, 4 times per day (at 8, 12, 16 and 20 h). Immediately after the immersions, no treatment was performed in 4 specimens, 4 other specimens were immediately brushed (0 min) using a fluoride dentifrice, and the device was replaced into the mouth. After 60 min, the remaining 4 specimens were brushed. In the second phase, the procedures were repeated, but after the immersions, the volunteers stimulated the salivary flow rate by chewing a sugar-free gum for 30 min. Changes in wear and %SMH were measured. ANOVA and Tukey's test showed statistical differences (p < 0.05) for the following comparisons. The chewing gum promoted less wear and %SMH. A decreasing %SMH and an increasing enamel wear were observed in the following conditions: erosion only, 60 min and 0 min. The human enamel presented greater %SMH and less wear compared to bovine enamel. The data suggest that the salivary stimulation after an erosive or erosive/abrasive attack can reduce the dental wear and the %SMH.

Primary tooth length determination in direct digital radiography: An in vivo study

Purpose: the purpose of this in vivo study was to compare the accuracy of primary incisor length determined by direct digital radiography (straight-line measurement and grid superimposition) and measurement of the actual tooth length. Methods. Twenty-two primary maxillary incisors that required extractions were selected from 3- to 5-year-old children. The teeth were radiographed with an intraoral sensor using the long cone technique and a sensor holder (30-cm focus-to-sensor distance). The exposure time was 03 seconds. Tooth length was estimated by using straight-line and grid measurements provided by the distance measurement feature of the Computed Dental Radiography digital dental imaging system. The actual tooth length was obtained by measuring the extracted tooth with G digital caliper. Data were analyzed statistically by Pearson's correlation coefficient and a paired t test. Results: There were statistically significant differences (P=.007) between the 2 measurement techniques and between the actual tooth lengths and grid measurements. There was no statistically significant difference (P=38) between straight-line measurements and actual tooth lengths, showing that the straight-line measurements were more accurate. Underestimation of the actual tooth length, however, occurred in 45% of the straight-line measurements and in 73% of the grid measurements. Conclusion: It is possible to determine primary tooth length in digital radiographs using onscreen measurements with 0 reasonable degree of accuracy.

Patient comfort in periapical examination using digital receptors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)