987 resultados para Image orientation
Resumo:
X-ray imaging is one of the most commonly used medical imaging modality. Albeit X-ray radiographs provide important clinical information for diagnosis, planning and post-operative follow-up, the challenging interpretation due to its 2D projection characteristics and the unknown magnification factor constrain the full benefit of X-ray imaging. In order to overcome these drawbacks, we proposed here an easy-to-use X-ray calibration object and developed an optimization method to robustly find correspondences between the 3D fiducials of the calibration object and their 2D projections. In this work we present all the details of this outlined concept. Moreover, we demonstrate the potential of using such a method to precisely extract information from calibrated X-ray radiographs for two different orthopedic applications: post-operative acetabular cup implant orientation measurement and 3D vertebral body displacement measurement during preoperative traction tests. In the first application, we have achieved a clinically acceptable accuracy of below 1° for both anteversion and inclination angles, where in the second application an average displacement of 8.06±3.71 mm was measured. The results of both applications indicate the importance of using X-ray calibration in the clinical routine.
Resumo:
Purpose Malposition of the acetabular component in total hip arthroplasty (THA) is a common surgical problem that can lead to hip dislocation, reduced range of motion and may result in early loosening. The aim of this study is to validate the accuracy and reproducibility of a single x-ray image based 2D/3D reconstruction technique in determining cup inclination and anteversion against two different computer tomography (CT)-based measurement techniques. Methods Cup anteversion and inclination of 20 patients after cementless primary THA was measured on standard anteroposterior (AP) radiographs with the help of the single x-ray 2D/3D reconstruction program and compared with two different 3D CT-based analyses [Ground Truth (GT) and MeVis (MV) reconstruction model]. Results The measurements from the single x-ray 2D/3D reconstruction technique were strongly correlated with both types of CT image-processing protocols for both cup inclination [R²=0.69 (GT); R²=0.59 (MV)] and anteversion [R²=0.89 (GT); R²=0.80 (MV)]. Conclusions The single x-ray image based 2D/3D reconstruction technique is a feasible method to assess cup position on postoperative x-rays. CTscans remain the golden standard for a more complex biomechanical evaluation when a lower tolerance limit (+/-2 degrees) is required.
Resumo:
We analyzed more than 200 OSIRIS NAC images with a pixel scale of 0.9-2.4 m/pixel of comet 67P/Churyumov-Gerasimenko (67P) that have been acquired from onboard the Rosetta spacecraft in August and September 2014 using stereo-photogrammetric methods (SPG). We derived improved spacecraft position and pointing data for the OSIRIS images and a high-resolution shape model that consists of about 16 million facets (2 m horizontal sampling) and a typical vertical accuracy at the decimeter scale. From this model, we derive a volume for the northern hemisphere of 9.35 km(3) +/- 0.1 km(3). With the assumption of a homogeneous density distribution and taking into account the current uncertainty of the position of the comet's center-of-mass, we extrapolated this value to an overall volume of 18.7 km(3) +/- 1.2 km(3), and, with a current best estimate of 1.0 X 10(13) kg for the mass, we derive a bulk density of 535 kg/m(3) +/- 35 kg/m(3). Furthermore, we used SPG methods to analyze the rotational elements of 67P. The rotational period for August and September 2014 was determined to be 12.4041 +/- 0.0004 h. For the orientation of the rotational axis (z-axis of the body-fixed reference frame) we derived a precession model with a half-cone angle of 0.14 degrees, a cone center position at 69.54 degrees/64.11 degrees (RA/Dec J2000 equatorial coordinates), and a precession period of 10.7 days. For the definition of zero longitude (x-axis orientation), we finally selected the boulder-like Cheops feature on the big lobe of 67P and fixed its spherical coordinates to 142.35 degrees right-hand-rule eastern longitude and -0.28 degrees latitude. This completes the definition of the new Cheops reference frame for 67P. Finally, we defined cartographic mapping standards for common use and combined analyses of scientific results that have been obtained not only within the OSIRIS team, but also within other groups of the Rosetta mission.
Resumo:
3. "Plan d'ensemble d'une enquête sur les attitudes generales de la population allemande a l'egard de la France et leurs consequences en ce qui concerne l'orientation des emissions en langue allemande de la radiodiffusion francaise", 18.05.1953. Typoskript, 7 Blatt; 4. "Note" Über Methode, Forschungsrichtung und Reichweite der Ergebnisse der Untersuchung; 18.05.1953; Typoskript, 7 Blatt; 5. "Note" Über Geschichte und Tätigkeit des Instituts für Sozialforschung; 18.05.1953; Typoskript, 5 Blatt; 6. Memorandum des Instituts zu Verfahren und ergebnissen der Untersuchung; 1954 [?]; Typoskript, 2 Blatt; 7.-17. Décamps, Jacques: Memoranden; 7. Memorandum, 12.09.1953; Typoskript, 1 Blatt; 8. "Memorandum re: Besprechung in Bad Godesberg in Bezug auf die französische Studie, am 04.September 1953", 10.09.1953. Typoskript, 1 Blatt; 9. "Memorandum re: Vorhaben des 'Centre d'Etudes Sociologiques, Paris', eine deutsch-französische Arbeitsgemeinschft für die Durchführung von Gemeindestudien zu gründen", 15.06.1953. Typoskript, 1 Blatt; 10. "Memorandum über den Besuch von M. Jean L. Pelosse, Centre d'Etudes sociologiques Paris", 12.06.1953. Typoskript, 3 Blatt; 11. "Bericht über die 'Journées d'Etudes eurropéennes sur la Population' Paris, 21., 22. und 23. Mai 1953", 01.06.1953; 12. "Bericht über den Stand der Verhandlungen mit dem Französischen Auswärtigen Amt und dem französischem Rundfunk. Besprechungen in Paris am 27. und 28. Mai 1953", 01.06.1953. Typoskript, 2 Blatt; 13. Angaben für Max Horkheimer zur Übergabe von Memoranden, Projektbeschreibungen und Briefentwürfen, Mai 1953; Typoskript, 1 Blatt; 14. "Bericht über das 'Institut National d'Etudes Démographiques'", 07.05.1953. Typoskript, 4 Blatt; 15. "Memorandum re: Methode der Gruppendiskussion", 04.05.1953. Typoskript, 1 Blatt; 16. "Besprechung im 'Institut francaise d'Opinion Publique, Paris' und bei der hohen Behörde Luxemburg" 30.04.1953; 17. "Besprechung im Auswärtigen Amt und bei dem französischen Rundfunk", 29.04.1953. Typoskript, 6 Blatt; 18. Horkheimer, Max: 1 Brief an den französischen Botschafter in der Bundesrepublik Deutschland, ohen Ort, ohne Datum; Typoskript, 1 Blatt; 19. Radiodiffusion-Télévision Francaise, le Directeur: 1 Briefabschrift an Jacques Décamps, Paris, 09.03.1954; 1 Blatt; 20. Plessner, Helmuth: 1 Brief an den französischen Außenminister, ohne Ort, 18.05.1953; 1 Blatt; 21. Plessner, Helmuth: 1 Brief an Radiodiffusion Francaise, ohne Ort, 18.05.1953; 1 Blatt; 22. Plessner, Helmuth: 1 Brief an den Ministerialrat der Sektion "Agences et Radio" im französischem Außenministerium, ohne Ort, 18.05.1953; 1 Blatt; "The Effectiveness of Candid versus Evasive German-Language Broadcasts of the Voice of America. Final Report", 1953. Typoskript, gebunden, 432 Blatt;
Resumo:
Determination of the soil coverage by crop residues after ploughing is a fundamental element of Conservation Agriculture. This paper presents the application of genetic algorithms employed during the fine tuning of the segmentation process of a digital image with the aim of automatically quantifying the residue coverage. In other words, the objective is to achieve a segmentation that would permit the discrimination of the texture of the residue so that the output of the segmentation process is a binary image in which residue zones are isolated from the rest. The RGB images used come from a sample of images in which sections of terrain were photographed with a conventional camera positioned in zenith orientation atop a tripod. The images were taken outdoors under uncontrolled lighting conditions. Up to 92% similarity was achieved between the images obtained by the segmentation process proposed in this paper and the templates made by an elaborate manual tracing process. In addition to the proposed segmentation procedure and the fine tuning procedure that was developed, a global quantification of the soil coverage by residues for the sampled area was achieved that differed by only 0.85% from the quantification obtained using template images. Moreover, the proposed method does not depend on the type of residue present in the image. The study was conducted at the experimental farm “El Encín” in Alcalá de Henares (Madrid, Spain).
Resumo:
Pen & Ink; Dr. Norman Thompson, University of Michigan Department of Surgery
Resumo:
Crys.m is a MATLAB routine that combines a micrograph of a crystal with a scaleable, rotatable three-dimensional cage structure to determine the orientation of the crystal axes. The example presented here uses the morphology of tetragonal lysozyme. Rotation of the cage until it aligns with the crystal in the image yields the orientation of the c axis of the crystal relative to the image normal. This analysis can be used for quantitative determination of crystal orientation effects induced by electric, magnetic and/or gravitational fields.
Resumo:
The aim of this Interdisciplinary Higher Degrees project was the development of a high-speed method of photometrically testing vehicle headlamps, based on the use of image processing techniques, for Lucas Electrical Limited. Photometric testing involves measuring the illuminance produced by a lamp at certain points in its beam distribution. Headlamp performance is best represented by an iso-lux diagram, showing illuminance contours, produced from a two-dimensional array of data. Conventionally, the tens of thousands of measurements required are made using a single stationary photodetector and a two-dimensional mechanical scanning system which enables a lamp's horizontal and vertical orientation relative to the photodetector to be changed. Even using motorised scanning and computerised data-logging, the data acquisition time for a typical iso-lux test is about twenty minutes. A detailed study was made of the concept of using a video camera and a digital image processing system to scan and measure a lamp's beam without the need for the time-consuming mechanical movement. Although the concept was shown to be theoretically feasible, and a prototype system designed, it could not be implemented because of the technical limitations of commercially-available equipment. An alternative high-speed approach was developed, however, and a second prototype syqtem designed. The proposed arrangement again uses an image processing system, but in conjunction with a one-dimensional array of photodetectors and a one-dimensional mechanical scanning system in place of a video camera. This system can be implemented using commercially-available equipment and, although not entirely eliminating the need for mechanical movement, greatly reduces the amount required, resulting in a predicted data acquisiton time of about twenty seconds for a typical iso-lux test. As a consequence of the work undertaken, the company initiated an 80,000 programme to implement the system proposed by the author.
Resumo:
To represent the local orientation and energy of a 1-D image signal, many models of early visual processing employ bandpass quadrature filters, formed by combining the original signal with its Hilbert transform. However, representations capable of estimating an image signal's 2-D phase have been largely ignored. Here, we consider 2-D phase representations using a method based upon the Riesz transform. For spatial images there exist two Riesz transformed signals and one original signal from which orientation, phase and energy may be represented as a vector in 3-D signal space. We show that these image properties may be represented by a Singular Value Decomposition (SVD) of the higher-order derivatives of the original and the Riesz transformed signals. We further show that the expected responses of even and odd symmetric filters from the Riesz transform may be represented by a single signal autocorrelation function, which is beneficial in simplifying Bayesian computations for spatial orientation. Importantly, the Riesz transform allows one to weight linearly across orientation using both symmetric and asymmetric filters to account for some perceptual phase distortions observed in image signals - notably one's perception of edge structure within plaid patterns whose component gratings are either equal or unequal in contrast. Finally, exploiting the benefits that arise from the Riesz definition of local energy as a scalar quantity, we demonstrate the utility of Riesz signal representations in estimating the spatial orientation of second-order image signals. We conclude that the Riesz transform may be employed as a general tool for 2-D visual pattern recognition by its virtue of representing phase, orientation and energy as orthogonal signal quantities.
Cross-orientation masking is speed invariant between ocular pathways but speed dependent within them
Resumo:
In human (D. H. Baker, T. S. Meese, & R. J. Summers, 2007b) and in cat (B. Li, M. R. Peterson, J. K. Thompson, T. Duong, & R. D. Freeman, 2005; F. Sengpiel & V. Vorobyov, 2005) there are at least two routes to cross-orientation suppression (XOS): a broadband, non-adaptable, monocular (within-eye) pathway and a more narrowband, adaptable interocular (between the eyes) pathway. We further characterized these two routes psychophysically by measuring the weight of suppression across spatio-temporal frequency for cross-oriented pairs of superimposed flickering Gabor patches. Masking functions were normalized to unmasked detection thresholds and fitted by a two-stage model of contrast gain control (T. S. Meese, M. A. Georgeson, & D. H. Baker, 2006) that was developed to accommodate XOS. The weight of monocular suppression was a power function of the scalar quantity ‘speed’ (temporal-frequency/spatial-frequency). This weight can be expressed as the ratio of non-oriented magno- and parvo-like mechanisms, permitting a fast-acting, early locus, as befits the urgency for action associated with high retinal speeds. In contrast, dichoptic-masking functions superimposed. Overall, this (i) provides further evidence for dissociation between the two forms of XOS in humans, and (ii) indicates that the monocular and interocular varieties of XOS are space/time scale-dependent and scale-invariant, respectively. This suggests an image-processing role for interocular XOS that is tailored to natural image statistics—very different from that of the scale-dependent (speed-dependent) monocular variety.
Resumo:
This study explored the perceptions of family environment, body image and self esteem of women who suffer from anorexia nervosa, bulimia nervosa, and depression. Using a nonequivalent control group design, one hundred and fifty women with anorexia nervosa (n = 50), bulimia nervosa (n = 50), and depression (n = 50) were given the Family Environment Scale (FES) and the Eating Disorders Inventory-2 (EDI-2). The objectives of this study were to: (1) study how women with anorexia nervosa and bulimia nervosa perceive their family environment as measured by the FES; (2) compare and contrast perceptions of family environment of women with anorexia nervosa and bulimia nervosa with the control group; (3) compare and contrast perceived levels of self esteem and body image as measured by the EDI-2 of women with anorexia nervosa and bulimia nervosa with the control group; and (4) examine the perceived family environments of eating disordered and non-eating disordered women with regard to body image and self esteem. Results suggested, women who suffered from anorexia nervosa or bulimia nervosa scored significantly lower (p $<$.021) on the Expressiveness, Intellectual-Cultural Orientation, and Active-Recreational subscales of the FES. The results also indicated that women who suffered from bulimia nervosa scored significantly higher (p $<$.015) than women who suffered from anorexia nervosa on the Conflict and Independence subscales of the FES. The results of studying these three populations reflected that women who suffered from anorexia nervosa scored significantly different (p $<$.000) than women who suffered from bulimia nervosa on many of the subscales of the EDI-2. The findings of the study confirmed that women who suffered from anorexia nervosa or bulimia nervosa scored significantly different (p $<$.000) on the subscales of the EDI-2 compared to women who suffered from depression. It was also confirmed that a relationship does exist between perceptions of body image and self esteem and perceptions of family environment amongst women with anorexia nervosa and bulimia nervosa as compared to depressed women. The findings of the study indicated that women who suffered from anorexia nervosa tended to: be less expressive and independent; handle conflict less openly; have a greater drive for thinness; have greater body dissatisfaction; be more perfectionistic; and struggle more intensely with fears around maturity and social insecurity than did women who suffered from bulimia nervosa or depression. In addition, the findings of the study also suggested that women who suffered from bulimia nervosa tended to: be raised in homes where openly expressed anger is permitted amongst family members; have a lesser drive for thinness; have less body dissatisfaction; be less perfectionistic; and not struggle as intensely with fears around maturity and social insecurity as do women who suffered from anorexia nervosa, but more than women who suffer from depression. Treatment implications that may assist community college professors and counselors in meeting the special needs of this special group of women were also discussed. (Abstract shortened by UMI.) ^