Preparation, characterization and gas sensing properties of nickel octa-iso-pentyloxynaphthalocyanine spin-coating films

Spin-coated films of nickel 1,6,10,15,19,24,28,33-octa-iso-pentyloxy-2,3-naphthalocyanine complex were obtained and characterized by UV-vis absorption spectroscopy. A linear relationship between the absorbance and solution concentration was observed. Low concentration solutions could afford smooth and homogeneous film surfaces as indicated by atomic force microscopy. The film structure was studied by small angle X-ray diffraction. The films were used for NO2 sensing experiments. The results indicate that the elevation of sensing temperature can shorten the response time and increase recovery ratio and response magnitude of the sensing films. High NO2 concentration can also shorten response time. (C) 2008 Elsevier B.V. All rights reserved.

Cultura de microalgas marinhas Isochrysis galbana , Green (variedade T. Iso) e Tetraselmis suecica (Kilin) Butch

The experimental cultures of the marine microalgae Isochrysis galbana Green (variety T. Iso) and Tetraselmis suecica (Kylin) Butch for feeding mussel larvae are described in detail.

Avaliações técnico-operacionais em estações de tratamento de água dos municípios das regiões leste e dos lagos do Estado do Rio de Janeiro, com propostas de melhorias para futura implantação de sistema de gestão ambiental baseado nas normas ISO 14.000.

Na gestão de recursos hídricos, as questões relacionadas aos impactos ambientais causados pelas Estações de Tratamento de Água não podem ser negligenciadas, devendo ser avaliadas em todos seus aspectos. Neste trabalho foram avaliadas as condições técnicasoperacionais e a gestão de seis Estações de Tratamento de Água de pequeno porte situadas nas regiões leste e dos lagos do estado do Rio de Janeiro. Os resultados apresentam dados de produção de água tratada, perdas de água contabilizadas com lavagem de filtros e descargas de decantadores e as não contabilizadas, gastos de energia e produtos químicos, produção de resíduos e seu destino final, bem como levantamento da capacitação do pessoal de operação, comparados com valores de literatura para ETAs consideradas eficientes. A partir da discussão dos resultados concluiu-se que há necessidade de correções de operação e manutenção das ETAs e monitoramento da qualidade das águas bruta e tratada, recomendando-se que a empresa de saneamento, efetivamente, implante melhorias para uma posterior implantação, em cada unidade, de um sistema de gestão ambiental, baseado nas normas ISO 14.000.

Effects of iso-nitrogenous fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120-day long experiment was conducted to find out the effects of urea plus triple super phosphate (UT), cow manure (CM) and poultry manure (PM) having iso-nil:rogen content on pond productivity and fish yield. Three fertilizer treatments, with three replicates each, were randomly assigned into nine earthen ponds of 100 m2 each. The stocking fish were rohu (Labeo ruhita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha with the ratio of 1:1:1. All ponds were fertilized fortnightly at the rate of 125 kg/ha urea plus 100 kg TSP/ha, 7000 kg/ha cow manure and 3500 kg/ha poultry manure for the treatment of UT, CM and PM, respectively, having an iso-nitrogen content of 56 kg in each. Though the physicochemical water quality parameters were more or less similar in all treatment ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P < 0.05) in the ponds receiving the treatment PM. Final growth as well as per unit production of fish was significantly higher (p

Effects of iso-nitrogenous and iso-phosphorus fertilizers as nutrient sources on carp polyculture in Bangladesh

A 120 day long experiment was conducted to find out the effects of cow manure with urea and triple super phosphate (CUT), poultry manure with urea and triple super phosphate (PUT) and cow manure with poultry manure (CP) having similar quantities of nitrogen and phosphorus on pond productivity and fish yield. The stocking fish were rohu (Labeo rohita), catla ( Catla catla) and mrigal ( Cirrhinus mrigala) in each treatment pond at the rate of 10000/ha. All ponds were fertilized fortnightly at the rate of 4000 kg/ha cow manure with 62 kg/ha urea and 65 kg/ha TSP, 2700 kg/ha poultry manure with 62 kg/ha urea and 16 kg/ha TSP, and 4000kg/ha cow manure with 2700 kg/ha poultry manure for the treatment CUT, PUT and CP respectively. Each treatment contained an iso-nitrogen and iso-phosphorus of 56 kg and 46 kg respectively. Though the physico-chemical parameters were more or less similar in all ponds, the chlorophyll-a content and abundance of total plankton were significantly higher (P< 0.05) in the ponds receiving the fertilizer treatment of PUT than those of other treatments. Final growth as well as per unit production of fish of treatment PUT (1773 kg/ha) was significantly higher (P< 0.05) than that of treatment CP (1528 kg/ha) followed by that of treatment CUT (1336 kg/ha). The over all results showed that poultry manure with urea and triple super phosphate proved to be superior to cow manure with urea and triple super phosphate, and poultry manure with cow manure, even when nitrogen and phosphorus content was similar, in carp polyculture system under prevailing conditions.

Developing ISO 14649-based conversational programming system for multi-channel complex machine tools

A multi-channel complex machine tool (MCCM) is a versatile machining system equipped with more than two spindles and turrets for both turning and milling operations. Despite the potential of such a tool, the value of the hardware is largely dependent on how the machine tools are effectively programmed for machining. In this paper we consider a shop-floor programming system based on ISO 14649 (called e-CAM), the international standard for the interface between computer-aided manufacture (CAM) and computer numerical control (CNC). To be deployed in practical industrial usage a great deal of research has to be carried out. In this paper we present: 1) Design consideration for an e-CAM system, 2) The architecture design of e-CAM, 3) Major algorithms to fulfill the modules defined in the architecture, and 4) Implementation details.

基于ISO/IEC 9126标准的软件质量评价系统

中国计算机学会

一种符合ISO 14651语义的藏文排序实现方法

本文介绍了一种实现藏文字典序排序的方法,它针对藏文"大字丁字符集"编码方案.通过引入有(无)前加基字符的概念,它把待排序的藏字预处理为有(无)前加基字符、前加字符、基字(基字符或者字丁)、后加字符、再后加字符串后,再行比较,从而避免拆分字丁.本实现方法符合ISO/IEC14651标准语义.

ISO 2022的有限状态机描述

ISO 2022编码体系对字符集国家标准的制订有很大影响,然而标准条款存在不确定性,有时难于理解。本文引入有限状态机(FSM)模型来形式化地刻画ISO 2022的特征。针对FSM五元组,详细说明了其状态空间的构成,提出了输入字母表的等效分类方法,给出了初始状态以及终结状态集合,分析了状态转移函数的规模,并采用FSM描述方法分析了ISO-2022-CN、EUC-CN、复合文本等标准,揭示了这些标准与ISO 2022的内在联系。这些工作有助于ISO 2022标准符合性检测、扩展标准的制订与系统实现复杂度评估。鉴于形式化描述方法在编码字符集标准领域未得到广泛应用,本文工作为该类研究引入了新的思路和方法。

基于ISO/IEC10646标准的藏文操作系统若干问题研究

长期以来尚未有完整的藏文操作系统,原因是藏文文字的特性要求特定的文字处理。本文基于ISO/IEC10646的藏文字符集标准,结合藏文正字法要求,详细分析了藏文操作系统实现中的关键问题:(1)藏文字符集方案比较与藏文存储;(2)藏文输入;(3)藏文显现。藏文显现是公认的“瓶颈”问题。对此,本文提出基于音节划分、使用OpenType字体及相应的文本引擎来解决藏文“叠加”字符的显现。此方案应用于Qt库的实验及相关测试证明基于ISO/IEC10646标准的藏文操作系统实现是较合理的方案。