Theoretical and experimental studies of airfoil characteristics in nonuniform sheared flow.

At head of title: Task 1P125901A142. Contract DA 44-177-AMC-70 (T). USAAML technical report 65-17.

Experimental studies of high temperature hypersonic diffusers.

"Project No. 1426. Task No. 142612."

Origin of granite in the light of experimental studies in the system : NaAlSi₃O₈=KAlSi₃O₈=Si0₂=H₂O /

Mode of access: Internet.

Experimental studies in recall and recognition,

"Columbia University Contributions to Philosophy and Psychology, vol. XXVII, no. 1."

Physiological changes in plasma proteins characteristic of human reproduction; cross-sectional and longitudinal electrophoretic data for women during and following uncomplicated and complicated pregnancies,

Includes bibliographies.

Critical and experimental studies in psychology from the University of Illinois.

Dynamical principles in recent psychology / Madison Bentley -- Some neglected aspects of a history of psychology / Coleman R. Griffith -- A preliminary study of the emothions/ C.A. Ruckmick -- A comment upon the psychology of the audience / Coleman R. Griffith -- Leading and legibility / Madison Bentley -- The printing of backbone titles on thin books and magazines / P.N. Gould, L.C. Raines and C.A. Ruckmick -- Experiments in sound localization / C.A. Ruckmick -- The intensive summation of thermal sensations / Annette Baron and Madison Bentley.

Experimental studies in mental deficiency. Three cases of imbeciltiy (Mongolian) and six cases of feeble-mindedness,

"Appendix and bibliography": p. 52-56.

Experimental studies on the accuracy of wax patterns used in investment casting

Investment casting is often used to produce fully functional prototype components from sacrificial patterns. These patterns (prototypes) may be made using specialized rapid prototyping techniques such as stereolithography or three-dimensional printing. When multiple functional prototypes are required, interim tools for making wax patterns are employed. The objective of this research work was to determine the precision and accuracy of wax patterns produced using several prototype tools. Linear contraction was used to determine the accuracy as a function of the wax injection parameters used in low-pressure injection moulding. Wax patterns were produced using polyurethane and silicone rubber tools. It has been shown that the accuracy of patterns from both tools is similar. However, silicone tools produce patterns with much higher contraction than those produced by polyurethane tools. Unconstrained patterns dimensions contracted as much as 3.44 +/- 0.40 per cent and 1.70 +/- 0.60 per cent for silicone and polyurethane tools respectively. The constrained dimensions contracted by 2.20 +/- 0.20 per cent in the case of silicone tools and 1.40 +/- 0.20 per cent in the case of polyurethane tools.

Experimental studies of lobe growth in the lichen Parmelia conspersa (Ehrh. Ex Ach.) Ach.

The radial growth of individual lobes of the foliose lichen, Parmelia conspersa (Ehrh. Ex Ach.) Ach. was studied to determine whether (1) adjacent lobes exchange carbohydrate and (2) marginal competition between lobes influences radial growth. In a survey of thalli of different size, the number of marginal lobes was linearly related to thallus circumference. However, the relationship between mean lobe width and thallus circumference was fitted by a second order polynomial. Hence, mean lobe width may reach a maximum in thalli approx. 3 cm in diameter. The interactions between marginal lobes were studied by either painting single lobes with acrylic paint or by removing lobes from the thallus. Painting the whole lobe virtually stopped its radial growth while partially painted lobes grew less than control lobes. The radial growth of a lobe was unaffected by either completely painting or removing its neighbour. Removal of both neighbouring lobes did not influence the radial growth of a lobe but severing the lobe from the thallus reduced its radial growth. In addition, lobe width increased significantly when both neighbouring lobes were removed. These results suggest that adjacent lobes have a considerable degree of independence and that there is little exchange of carbohydrate between them. In addition, marginal competition between adjacent lobes may restrict the lateral extension of the lobe and this may maintain a more constant mean lobe width in larger thalli. It is possible that the intensity of marginal competition between adjacent lobes may vary with thallus size and this could be a factor determining the growth curve of a foliose lichen throughout its life.

Experimental studies on the distribution of the sexes of Mercurialis perennis L.

1) In a beechwood, male shoots of Mercurialis perennis were more frequent than female shoots in canopy openings, while females were more frequent at treebases than in canopy openings. 2) Flowering shoots were more frequent than non-flowering in openings. 3) The pH, moisture and organic content of the soil were similar at treebases and openings. The light climate was similar in both habitats in April but greater in the openings in August. 4) Removal of canopies of Pteridium aquilinum and Rubus fruticosus, above populations of M. perennis, resulted in a greater increase in the numbers of male shoots than of female shoots. 5) These results suggest that male and female plants differ in numbers, or growth, in different woodland microhabitats and that these differences are correlated with the above-ground environment (e.g. light).

Experimental studies of hypothallus growth in the lichen Rhizocarpon geographicum

Removal of the areolae of the crustose lichen Rhizocarpon geographicum (L.)DC. resulted in either low or no measurable radial growth of the marginal hypothallus. Radial growth of the hypothallus was also significantly reduced compared with intact thalli when (1) areolae were removed to within 1 and 2 mm of the hypothallus and (2) a 5 mm wide ‘moat’ was created between the areolae and the hypothallus. Adding ribitol (0.01 M) to isolated hypothalli at 3-month intervals over 15 months results in total radial growth c. 60% that of intact thalli. Adding an arabitol/mannitol mixture (0.05 M arabitol, 0.03 M mannitol) increased radial growth compared with deionized water and ribitol treatments. Adding ribitol (0.7 M), arabitol (0.2 M) and mannitol (0.08 M) to the areolae of intact thalli had no significant effects on radial growth of the hypothallus. On a south-facing rock surface, isolated hypothalli grew at a similar rate to intact thalli for 2 months. Growth then declined and the hypothalli disappeared from the rock surface within 6 months. The effects of addition of carbohydrate suggest that the marginal hypothallus has the capacity to utilize exogeneous materials. However, in intact thalli in the field, the radial growth of the hypothallus is likely to be a result of transfer of materials from the areolae through hyphal connections.

Towards a practical implementation of coherent WDM:analytical, numerical, and experimental studies

Future optical networks will require the implementation of very high capacity (and therefore spectral efficient) technologies. Multi-carrier systems, such as Orthogonal Frequency Division Multiplexing (OFDM) and Coherent WDM (CoWDM), are promising candidates. In this paper, we present analytical, numerical, and experimental investigations of the impact of the relative phases between optical subcarriers of CoWDM systems, as well as the effect that the number of independently modulated subcarriers can have on the performance. We numerically demonstrate a five-subcarrier and three-subcarrier 10-GBd CoWDM system with direct detected amplitude shift keying (ASK) and differentially/coherently detected (D) phase shift keying (PSK). The simulation results are compared with experimental measurements of a 32-Gbit/s DPSK CoWDM system in two configurations. The first configuration was a practical 3-modulator array where all three subcarriers were independently modulated, the second configuration being a traditional 2-modulator odd/even configuration, where only odd and even subcarriers were independently modulated. Simulation and experimental results both indicate that the independent modulation implementation has a greater dependency on the relative phases between subcarriers, with a stronger penalty for the center subcarrier than the odd/even modulation scheme.

Patterns of sedentary behavior : insights from observational and experimental studies on body composition and energy expenditure

It is recognized that sedentary behavior (SB) has deleterious effects on numerous health outcomes and it appears that physiological mechanisms underlying these harms are distinct from the ones explaining moderate-to-vigorous physical activity (MVPA) benefits. Sedentary behavior represents a large portion of human’s life and is increasing with technological development. A new current of opinion supports the idea that the manner SB is accumulated plays an important role. This dissertation presents six research studies conducted under the scope of SB. In the methodological area, the first study highlighted the magnitude of potential errors in estimating SB and its patterns from common alternative methods (accelerometer and heart rate monitor) compared to ActivPAL. This study presented the accelerometer as a valid method at a group level. Two studies (2 and 5) were performed in older adults (the most sedentary group in the population) to test the associations for SB patterns with abdominal obesity using accelerometry. The findings showed positive graded associations for prolonged sedentary bouts with abdominal obesity and showed that those who interrupted SB more frequently were less likely to present abdominal obesity. Therefore, public health recommendations regarding breaking up SB more often are expected to be relevant. The associations between sedentary patterns and abdominal obesity were independent of MVPA in older adults. However, the low MVPA in this group makes it unclear whether this independent relationship still exists if highly active persons are analysed. Study 3 inovates by examining the association of SB with body fatness in highly trained athletes and found SB to predict total fat mass and trunk fat mass, independently of age and weekly training time. Study 4 also brings novelty to this research field by quantifying the metabolic and energetic cost of the transition from sitting to standing and then sitting back down (a break), informing about the modest energetic costs (0.32 kcal·min−1). Finally, from a successful multicomponent pilot intervention to reduce and break up SB (study 6), an important behavioral resistance to make more sit/stand transitions despite successfully reducing sitting time (~ 1.85 hours·day-1) was found, which may be relevant to inform future behavioral modification programs. The present work provides observational and experimental evidence on the relation for SB patterns with body composition outcomes and energy regulation that may be relevant for public health interventions.

A SCR Model based on Reactor and Engine Experimental Studies for a Cu-zeolite Catalyst

A NOx reduction efficiency higher than 95% with NH3 slip less than 30 ppm is desirable for heavy-duty diesel (HDD) engines using selective catalytic reduction (SCR) systems to meet the US EPA 2010 NOx standard and the 2014-2018 fuel consumption regulation. The SCR performance needs to be improved through experimental and modeling studies. In this research, a high fidelity global kinetic 1-dimensional 2-site SCR model with mass transfer, heat transfer and global reaction mechanisms was developed for a Cu-zeolite catalyst. The model simulates the SCR performance for the engine exhaust conditions with NH3 maldistribution and aging effects, and the details are presented. SCR experimental data were collected for the model development, calibration and validation from a reactor at Oak Ridge National Laboratory (ORNL) and an engine experimental setup at Michigan Technological University (MTU) with a Cummins 2010 ISB engine. The model was calibrated separately to the reactor and engine data. The experimental setup, test procedures including a surrogate HD-FTP cycle developed for transient studies and the model calibration process are described. Differences in the model parameters were determined between the calibrations developed from the reactor and the engine data. It was determined that the SCR inlet NH3 maldistribution is one of the reasons causing the differences. The model calibrated to the engine data served as a basis for developing a reduced order SCR estimator model. The effect of the SCR inlet NO2/NOx ratio on the SCR performance was studied through simulations using the surrogate HD-FTP cycle. The cumulative outlet NOx and the overall NOx conversion efficiency of the cycle are highest with a NO2/NOx ratio of 0.5. The outlet NH3 is lowest for the NO2/NOx ratio greater than 0.6. A combined engine experimental and simulation study was performed to quantify the NH3 maldistribution at the SCR inlet and its effects on the SCR performance and kinetics. The uniformity index (UI) of the SCR inlet NH3 and NH3/NOx ratio (ANR) was determined to be below 0.8 for the production system. The UI was improved to 0.9 after installation of a swirl mixer into the SCR inlet cone. A multi-channel model was developed to simulate the maldistribution effects. The results showed that reducing the UI of the inlet ANR from 1.0 to 0.7 caused a 5-10% decrease in NOx reduction efficiency and 10-20 ppm increase in the NH3 slip. The simulations of the steady-state engine data with the multi-channel model showed that the NH3 maldistribution is a factor causing the differences in the calibrations developed from the engine and the reactor data. The Reactor experiments were performed at ORNL using a Spaci-IR technique to study the thermal aging effects. The test results showed that the thermal aging (at 800°C for 16 hours) caused a 30% reduction in the NH3 stored on the catalyst under NH3 saturation conditions and different axial concentration profiles under SCR reaction conditions. The kinetics analysis showed that the thermal aging caused a reduction in total NH3 storage capacity (94.6 compared to 138 gmol/m3), different NH3 adsorption/desorption properties and a decrease in activation energy and the pre-exponential factor for NH3 oxidation, standard and fast SCR reactions. Both reduction in the storage capability and the change in kinetics of the major reactions contributed to the change in the axial storage and concentration profiles observed from the experiments.

Theoretical and experimental studies of gold catalysts for glucose oxidation

The glucaric acid (GLA) has been identified as a “top value-added chemical from biomass” that can be employed for many uses; for instance, it could be a precursor of adipic acid, a monomer of Nylon-6,6. GLA can be synthetized by the oxidation of glucose (GLU), passing through the intermediate gluconic acid (GLO). In recent years, a new process has been sought to obtain GLA in an economic and environmental sustainable way, in order to replace the current use of HNO3 as a stoichiometric oxidant, or electrocatalysis and biochemical synthesis, which show several disadvantages. Thereby, this work is focused on the study of catalysts based on gold nanoparticles supported on activated carbon for the oxidation reaction of GLU to GLA using O2 as an oxidant agent and NaOH as base. The sol-immobilization method leads us to obtain small and well dispersed nanoparticles, characterized by UV-Vis, XRD and TEM techniques. Repeating the reaction on different batches of catalyst, both the synthesis and the reaction were confirmed to be reproducible. The effect of the reaction time feeding GLO as reagent was studied: the results show that the conversion of GLO increases as the reaction time increases; however, the yields of GLA and others increase up to 1 hour, and then they remain constant. In order to obtain information on the catalytic mechanism at the atomistic level, a computational study based on density functional theory and atomistic modeling of the gold nano-catalyst were performed. Highly symmetric (icosahedral and cubo-octahedral) and distorted Au55 nanoparticles have been optimized along with Au(111) and Au(100) surfaces. Distorted structures were found to be more stable than symmetrical ones due to relativistic effects. On these various models the adsorptions of various species involved in the catalysis have been studied, including OH- species, GLU and GLO. The study carried out aims to provide a method for approaching to the study of nanoparticellary catalytic systems.