Consumer behavior towards fuel efficient vehicles. Volume III: forecasts of the composition of household motor vehicle holdings. Final report.

National Highway Traffic Safety Administration, Technology Assessment Division, Washington, D.C.

The analysis and prediction of the quantity and composition of household refuse

This thesis describes the development of a simple and accurate method for estimating the quantity and composition of household waste arisings. The method is based on the fundamental tenet that waste arisings can be predicted from information on the demographic and socio-economic characteristics of households, thus reducing the need for the direct measurement of waste arisings to that necessary for the calibration of a prediction model. The aim of the research is twofold: firstly to investigate the generation of waste arisings at the household level, and secondly to devise a method for supplying information on waste arisings to meet the needs of waste collection and disposal authorities, policy makers at both national and European level and the manufacturers of plant and equipment for waste sorting and treatment. The research was carried out in three phases: theoretical, empirical and analytical. In the theoretical phase specific testable hypotheses were formulated concerning the process of waste generation at the household level. The empirical phase of the research involved an initial questionnaire survey of 1277 households to obtain data on their socio-economic characteristics, and the subsequent sorting of waste arisings from each of the households surveyed. The analytical phase was divided between (a) the testing of the research hypotheses by matching each household's waste against its demographic/socioeconomic characteristics (b) the development of statistical models capable of predicting the waste arisings from an individual household and (c) the development of a practical method for obtaining area-based estimates of waste arisings using readily available data from the national census. The latter method was found to represent a substantial improvement over conventional methods of waste estimation in terms of both accuracy and spatial flexibility. The research therefore represents a substantial contribution both to scientific knowledge of the process of household waste generation, and to the practical management of waste arisings.

Estimating the SCAN*PRO model of store sales: HB, FM or just OLS?

In this paper we investigate whether consideration of store-level heterogeneity in marketing mix effects improves the accuracy of the marketing mix elasticities, fit, and forecasting accuracy of the widely-applied SCAN*PRO model of store sales. Models with continuous and discrete representations of heterogeneity, estimated using hierarchical Bayes (HB) and finite mixture (FM) techniques, respectively, are empirically compared to the original model, which does not account for store-level heterogeneity in marketing mix effects, and is estimated using ordinary least squares (OLS). The empirical comparisons are conducted in two contexts: Dutch store-level scanner data for the shampoo product category, and an extensive simulation experiment. The simulation investigates how between- and within-segment variance in marketing mix effects, error variance, the number of weeks of data, and the number of stores impact the accuracy of marketing mix elasticities, model fit, and forecasting accuracy. Contrary to expectations, accommodating store-level heterogeneity does not improve the accuracy of marketing mix elasticities relative to the homogeneous SCAN*PRO model, suggesting that little may be lost by employing the original homogeneous SCAN*PRO model estimated using ordinary least squares. Improvements in fit and forecasting accuracy are also fairly modest. We pursue an explanation for this result since research in other contexts has shown clear advantages from assuming some type of heterogeneity in market response models. In an Afterthought section, we comment on the controversial nature of our result, distinguishing factors inherent to household-level data and associated models vs. general store-level data and associated models vs. the unique SCAN*PRO model specification.

Breaks in the UK household sector money demand function

We use non-parametric procedures to identify breaks in the underlying series of UK household sector money demand functions. Money demand functions are estimated using cointegration techniques and by employing both the Simple Sum and Divisia measures of money. P-star models are also estimated for out-of-sample inflation forecasting. Our findings suggest that the presence of breaks affects both the estimation of cointegrated money demand functions and the inflation forecasts. P-star forecast models based on Divisia measures appear more accurate at longer horizons and the majority of models with fundamentals perform better than a random walk model.

Household Preferences for Financing Hurricane Risk Mitigation: A Survey Based Empirical Analysis

After a series of major storms over the last 20 years, the state of financing for U.S. natural disaster insurance has undergone substantial disruptions causing many federal and state backed programs against residential property damage to become severally underfunded. In order to regain actuarial soundness, policy makers have proposed a shift to a system that reflects risk-based pricing for property insurance. We examine survey responses from 1394 single-family homeowners in the state of Florida for support of several natural disaster mitigation policy reforms. Utilizing a partial proportional odds model we test for effects of location, risk perception, socio-economic and housing characteristics on support for policy reforms. Our findings suggest residents across the state, not just risk-prone homeowners, support the current subsidized model. We also examine several other policy questions from the survey to verify our initial results. Finally, the implications of our findings are discussed to provide inputs to policymakers.

ESSAYS ON THE WTO ACCESSION, HOUSEHOLD INCOME AND MULTIDIMENSIONAL POVERTY: EVIDENCE FROM CHINA

In the course of integrating into the global market, especially since China’s WTO accession, China has achieved remarkable GDP growth and has become the second largest economy in the world. These economic achievements have substantially increased Chinese incomes and have generated more government revenue for social progress. However, China’s economic progress, in itself, is neither sufficient for achieving desirable development outcomes nor a guarantee for expanding peoples’ capabilities. In fact, a narrow emphasis on GDP growth proves to be unsustainable, and may eventually harm the life quality of Chinese citizens. Without the right set of policies, a deepening trade-openness policy in China may enlarge social disparities and some people may further be deprived of basic public services and opportunities. To address these concerns, this dissertation, a set of three essays in Chapters 2-4, examines the impact of China's WTO accession on income distribution, compares China’s income and multidimensional poverty reduction and investigates the factors, including the WTO accession, that predict multidimensional poverty. By exploiting the exogenous variation in exposure to tariff changes across provinces and over time, Chapter 2 (Essay 1) estimates the causal effects of trade shocks and finds that China’s WTO accession has led to an increase in average household income, but its impacts are not evenly distributed. Households in urban areas have benefited more significantly than those in rural areas. Households with members working in the private sector have benefited more significantly than those in the public sector. However, the WTO accession has contributed to reducing income inequality between higher and lower income groups. Chapter 3 (Essay 2) explains and applies the Alkire and Foster Method (AF Method), examines multidimensional poverty in China and compares it with income poverty. It finds that China’s multidimensional poverty has declined dramatically during the period from 1989-2011. Reduction rates and patterns, however, vary by dimensions: multidimensional poverty reduction exhibits unbalanced regional progress as well as varies by province and between rural and urban areas. In comparison with income poverty, multidimensional poverty reduction does not always coincide with economic growth. Moreover, if one applies a single measure ─ either that of income or multidimensional poverty ─ a certain proportion of those who are poor remain unrecognized. By applying a logistic regression model, Chapter 4 (Essay 3) examines factors that predict multidimensional poverty and finds that the major factors predicting multidimensional poverty in China include household size, education level of the household head, health insurance coverage, geographic location, and the openness of the local economy. In order to alleviate multidimensional poverty, efforts should be targeted to (i) expand education opportunities for the household heads with low levels of education, (ii) develop appropriate geographic policies to narrow regional gaps and (iii) make macroeconomic policies work for the poor.

Economic well-being and poverty among the elderly: an analysis based on a collective consumption model

We apply the collective consumption model of Browning, Chiappori and Lewbel (2006) to analyse economic well-being and poverty among the elderly. The model focuses on individual preferences, a consumption technology that captures the economies of scale of living in a couple, and a sharing rule that governs the intra-household allocation of resources. The model is applied to a time series of Dutch consumption expenditure surveys. Our empirical results indicate substantial economies of scale and a wifeís share that is increasing in total expenditures. We further calculated poverty rates by means of the collective consumption model. Collective poverty rates of widows and widowers turn out to be slightly lower than traditional ones based on a standard equivalence scale. Poverty among women (men) in elderly couples, however, seems to be heavily underestimated (overestimated) by the traditional approach. Finally, we analysed the impact of becoming a widow(er). Based on cross-sectional evidence, we find that the drop (increase) in material well-being following the husbandís death is substantial for women in high (low) expenditure couples. For men, the picture is reversed.

Household epidemic models with varying infection response

This paper is concerned with SIR (susceptible--infected--removed) household epidemic models in which the infection response may be either mild or severe, with the type of response also affecting the infectiousness of an individual. Two different models are analysed. In the first model, the infection status of an individual is predetermined, perhaps due to partial immunity, and in the second, the infection status of an individual depends on the infection status of its infector and on whether the individual was infected by a within- or between-household contact. The first scenario may be modelled using a multitype household epidemic model, and the second scenario by a model we denote by the infector-dependent-severity household epidemic model. Large population results of the two models are derived, with the focus being on the distribution of the total numbers of mild and severe cases in a typical household, of any given size, in the event that the epidemic becomes established. The aim of the paper is to investigate whether it is possible to determine which of the two underlying explanations is causing the varying response when given final size household outbreak data containing mild and severe cases. We conduct numerical studies which show that, given data on sufficiently many households, it is generally possible to discriminate between the two models by comparing the Kullback-Leibler divergence for the two fitted models to these data.

Analysis of a stochastic SIR epidemic on a random network incorporating household structure

This paper is concerned with a stochastic SIR (susceptible-infective-removed) model for the spread of an epidemic amongst a population of individuals, with a random network of social contacts, that is also partitioned into households. The behaviour of the model as the population size tends to infinity in an appropriate fashion is investigated. A threshold parameter which determines whether or not an epidemic with few initial infectives can become established and lead to a major outbreak is obtained, as are the probability that a major outbreak occurs and the expected proportion of the population that are ultimately infected by such an outbreak, together with methods for calculating these quantities. Monte Carlo simulations demonstrate that these asymptotic quantities accurately reflect the behaviour of finite populations, even for only moderately sized finite populations. The model is compared and contrasted with related models previously studied in the literature. The effects of the amount of clustering present in the overall population structure and the infectious period distribution on the outcomes of the model are also explored.

Threshold behaviour and final outcome of an epidemic on a random network with household structure

This paper considers a stochastic SIR (susceptible-infective-removed) epidemic model in which individuals may make infectious contacts in two ways, both within 'households' (which for ease of exposition are assumed to have equal size) and along the edges of a random graph describing additional social contacts. Heuristically-motivated branching process approximations are described, which lead to a threshold parameter for the model and methods for calculating the probability of a major outbreak, given few initial infectives, and the expected proportion of the population who are ultimately infected by such a major outbreak. These approximate results are shown to be exact as the number of households tends to infinity by proving associated limit theorems. Moreover, simulation studies indicate that these asymptotic results provide good approximations for modestly-sized finite populations. The extension to unequal sized households is discussed briefly.

Application of a Bivariate Probit Model to Investigate the Intended Evacuation from Hurricane

With evidence of increasing hurricane risks in Georgia Coastal Area (GCA) and Virginia in the U.S. Southeast and elsewhere, understanding intended evacuation behavior is becoming more and more important for community planners. My research investigates intended evacuation behavior due to hurricane risks, a behavioral survey of the six counties in GCA under the direction of two social scientists with extensive experience in survey research related to citizen and household response to emergencies and disasters. Respondents gave answers whether they would evacuate under both voluntary and mandatory evacuation orders. Bivariate probit models are used to investigate the subjective belief structure of whether or not the respondents are concerned about the hurricane, and the intended probability of evacuating as a function of risk perception, and a lot of demographic and socioeconomic variables (e.g., gender, military, age, length of residence, owning vehicles).

Increasing the value of household appliances by adding a heat pump system

Historically, domestic tasks such as preparing food and washing and drying clothes and dishes were done by hand. In a modern home many of these chores are taken care of by machines such as washing machines, dishwashers and tumble dryers. When the first such machines came on the market customers were happy that they worked at all! Today, the costs of electricity and customers’ environmental awareness are high, so features such as low electricity, water and detergent use strongly influence which household machine the customer will buy. One way to achieve lower electricity usage for the tumble dryer and the dishwasher is to add a heat pump system. The function of a heat pump system is to extract heat from a lower temperature source (heat source) and reject it to a higher temperature sink (heat sink) at a higher temperature level. Heat pump systems have been used for a long time in refrigerators and freezers, and that industry has driven the development of small, high quality, low price heat pump components. The low price of good quality heat pump components, along with an increased willingness to pay extra for lower electricity usage and environmental impact, make it possible to introduce heat pump systems in other household products. However, there is a high risk of failure with new features. A number of household manufacturers no longer exist because they introduced poorly implemented new features, which resulted in low quality and product performance. A manufacturer must predict whether the future value of a feature is high enough for the customer chain to pay for it. The challenge for the manufacturer is to develop and produce a high-performance heat pump feature in a household product with high quality, predict future willingness to pay for it, and launch it at the right moment in order to succeed. Tumble dryers with heat pump systems have been on the market since 2000. Paper I reports on the development of a transient simulation model of a commercial heat pump tumble dryer. The measured and simulated results were compared with good similarity. The influence of the size of the compressor and the condenser was investigated using the validated simulation model. The results from the simulation model show that increasing the cylinder volume of the compressor by 50% decreases the drying time by 14% without using more electricity.  Paper II is a concept study of adding a heat pump system to a dishwasher in order to decrease the total electricity usage. The dishwasher, dishware and water are heated by the condenser, and the evaporator absorbs the heat from a water tank. The majority of the heat transfer to the evaporator occurs when ice is generated in the water tank. An experimental setup and a transient simulation model of a heat pump dishwasher were developed. The simulation results show a 24% reduction in electricity use compared to a conventional dishwasher heated with an electric element. The simulation model was based on an experimental setup that was not optimised. During the study it became apparent that it is possible to decrease electricity usage even more with the next experimental setup.

Integrated Proteomics Identified Up-regulated Focal Adhesion-mediated Proteins In Human Squamous Cell Carcinoma In An Orthotopic Murine Model.

Understanding the molecular mechanisms of oral carcinogenesis will yield important advances in diagnostics, prognostics, effective treatment, and outcome of oral cancer. Hence, in this study we have investigated the proteomic and peptidomic profiles by combining an orthotopic murine model of oral squamous cell carcinoma (OSCC), mass spectrometry-based proteomics and biological network analysis. Our results indicated the up-regulation of proteins involved in actin cytoskeleton organization and cell-cell junction assembly events and their expression was validated in human OSCC tissues. In addition, the functional relevance of talin-1 in OSCC adhesion, migration and invasion was demonstrated. Taken together, this study identified specific processes deregulated in oral cancer and provided novel refined OSCC-targeting molecules.

[climacteric Syndrome In A Northeastern Brazilian City: A Household Survey].

To assess the prevalence of Climacteric Syndrome (CS) in women from a municipality of Northeastern Brazil which is less developed socioeconomically. A prospective household survey was performed in São Luís, Maranhão, Brazil with 1,210 climacteric women aged 45 to 60 years. Interviews were applied using previously tested standard questionnaires from April to July 2008. The severity of climacteric symptoms was analyzed by circulatory and psychological indexes and the latter were associated with menopausal status. Multiple correspondence analysis was used to assess the relation among climacteric symptoms. Most patients were 55 to 60 years old (35.3%), mulatto (37.9%), with 9-11 years of schooling (39.8%), with a partner (56%), Catholic (73.9%) and belonged to the socioeconomic class C (51.1%). The prevalence of CS was 85.9%, and hot flashes (56.4%) and sweating (50.4%) were the most prevalent symptoms. The most frequent psychological symptoms were nervousness (45%) and emotional liability (44.8%). The severity of vasomotor and psychological symptoms was significantly higher during the peri and postmenopausal period (p<0.05). Vaginal dryness (62.7%) was the most prevalent urogenital complaint. The prevalence of CS was high among women from São Luís, Maranhão, Brazil.

Electronic And Structural Study Of Pt-modified Au Vicinal Surfaces: A Model System For Pt-au Catalysts.

Two single crystalline surfaces of Au vicinal to the (111) plane were modified with Pt and studied using scanning tunneling microscopy (STM) and X-ray photoemission spectroscopy (XPS) in ultra-high vacuum environment. The vicinal surfaces studied are Au(332) and Au(887) and different Pt coverage (θPt) were deposited on each surface. From STM images we determine that Pt deposits on both surfaces as nanoislands with heights ranging from 1 ML to 3 ML depending on θPt. On both surfaces the early growth of Pt ad-islands occurs at the lower part of the step edge, with Pt ad-atoms being incorporated into the steps in some cases. XPS results indicate that partial alloying of Pt occurs at the interface at room temperature and at all coverage, as suggested by the negative chemical shift of Pt 4f core line, indicating an upward shift of the d-band center of the alloyed Pt. Also, the existence of a segregated Pt phase especially at higher coverage is detected by XPS. Sample annealing indicates that the temperature rise promotes a further incorporation of Pt atoms into the Au substrate as supported by STM and XPS results. Additionally, the catalytic activity of different PtAu systems reported in the literature for some electrochemical reactions is discussed considering our findings.