Water availability predicts forest canopy height at the global scale.

The tendency of trees to grow taller with increasing water availability is common knowledge. Yet a robust, universal relationship between the spatial distribution of water availability and forest canopy height (H) is lacking. Here, we created a global water availability map by calculating an annual budget as the difference between precipitation (P) and potential evapotranspiration (PET) at a 1-km spatial resolution, and in turn correlated it with a global H map of the same resolution. Across forested areas over the globe, Hmean increased with P-PET, roughly: Hmean (m) = 19.3 + 0.077*(P-PET). Maximum forest canopy height also increased gradually from ~ 5 to ~ 50 m, saturating at ~ 45 m for P-PET > 500 mm. Forests were far from their maximum height potential in cold, boreal regions and in disturbed areas. The strong association between forest height and P-PET provides a useful tool when studying future forest dynamics under climate change, and in quantifying anthropogenic forest disturbance.

Comparative analysis between identified injuries of victims of fall from height and other mechanisms of closed trauma

OBJECTIVE: To analyze the lesions diagnosed in victims of falls, comparing them with those diagnosed in other mechanisms of blunt trauma.METHODS: We conducted a retrospective study of trauma protocol charts (prospectively collected) from 2008 to 2010, including victims of trauma over 13 years of age admitted to the emergency room. The severity of injuries was stratified by the Abbreviated Injury Scale (AIS) and Injury Severity Score (ISS). Variables were compared between the group of victims of falls from height (Group 1) and the other victims of blunt trauma (Group 2). We used the Student t, chi-square and Fisher tests for comparison between groups, considering the value of p <0.05 as significant.RESULTS: The series comprised 4,532 cases of blunt trauma, of which 555 (12.2%) were victims of falls from height. Severe lesions (AISe"3) were observed in the extremities (17.5%), in the cephalic segment (8.4%), chest (5.5%) and the abdomen (2.9%). Victims of Group 1 had significantly higher mean age, AIS in extremities / pelvis, AIS in the thoracic segment and ISS (p <0.05). The group 1 had significantly (p <0.05) higher incidence of tracheal intubation on admission, pneumothorax, hemothorax, rib fractures, chest drainage, spinal trauma, pelvic fractures, complex pelvic fractures and fractures to the upper limbs.CONCLUSION: Victims of fall from height had greater anatomic injury severity, greater frequency and severity of lesions in the thoracic segment and extremities.

Comparative analysis between identified injuries of victims of fall from height and other mechanisms of closed trauma

OBJECTIVE:to identify predictors of death in blunt trauma patients sustaining pelvic fractures and, posteriorly, compare them to a previously reported series from the same center.METHOD: Retrospective analysis of trauma registry data, including blunt trauma patients older than 14 y.o. sustaining pelvic fractures admitted from 2008 to 2010. Patients were assigned into group 1 (dead) or 2 (survivors). We used Student's t, qui square and Fisher's tests for statistical analysis, considering p<0.05 as significant. Posteriorly, we compared predictors of death between both periods.RESULTS: Seventy-nine cases were included. Mean RTS, ISS and TRISS were, respectively, 6.44 + 2.22, 28.0 + 15.2 e 0.74 + 0.33. Nineteen patients died (24,0%). Main cause of death was hemorrhage (42,1%). Group 1 was characterized by (p<0.05) lower systolic blood pressure and Glasgow coma scale means on admission, higher heart rate, head AIS, extremity AIS and ISS means, as well as, higher frequency of severe head injuries and complex pelvic fractures. Comparing both periods, we notice that the anatomic and physiologic severity of injury increased (RTS and ISS means). Furthermore, there was a decrease in the impact of associated thoracic and abdominal injuries on the prognosis and an association of lethality with the presence of complex pelvic fractures.CONCLUSION: There were significant changes in the predictors of death between these two periods. The impact of thoracic and abdominal associated injures decreased while the importance of severe retroperitoneal hemorrhage increased. There was also an increase in trauma severity, which accounted for high lethality.

Scalable algorithms for height field illumination

Global illumination algorithms are at the center of realistic image synthesis and account for non-trivial light transport and occlusion within scenes, such as indirect illumination, ambient occlusion, and environment lighting. Their computationally most difficult part is determining light source visibility at each visible scene point. Height fields, on the other hand, constitute an important special case of geometry and are mainly used to describe certain types of objects such as terrains and to map detailed geometry onto object surfaces. The geometry of an entire scene can also be approximated by treating the distance values of its camera projection as a screen-space height field. In order to shadow height fields from environment lights a horizon map is usually used to occlude incident light. We reduce the per-receiver time complexity of generating the horizon map on N N height fields from O(N) of the previous work to O(1) by using an algorithm that incrementally traverses the height field and reuses the information already gathered along the path of traversal. We also propose an accurate method to integrate the incident light within the limits given by the horizon map. Indirect illumination in height fields requires information about which other points are visible to each height field point. We present an algorithm to determine this intervisibility in a time complexity that matches the space complexity of the produced visibility information, which is in contrast to previous methods which scale in the height field size. As a result the amount of computation is reduced by two orders of magnitude in common use cases. Screen-space ambient obscurance methods approximate ambient obscurance from the depth bu er geometry and have been widely adopted by contemporary real-time applications. They work by sampling the screen-space geometry around each receiver point but have been previously limited to near- field effects because sampling a large radius quickly exceeds the render time budget. We present an algorithm that reduces the quadratic per-pixel complexity of previous methods to a linear complexity by line sweeping over the depth bu er and maintaining an internal representation of the processed geometry from which occluders can be efficiently queried. Another algorithm is presented to determine ambient obscurance from the entire depth bu er at each screen pixel. The algorithm scans the depth bu er in a quick pre-pass and locates important features in it, which are then used to evaluate the ambient obscurance integral accurately. We also propose an evaluation of the integral such that results within a few percent of the ray traced screen-space reference are obtained at real-time render times.

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

APPLICATION HEIGHT IN HERBICIDES EFFICIENCY IN BEAN CROPS

ABSTRACTInadequate herbicide application can result in failures in weed control and/or poisoning of the crops, resulting in yield losses. In this research were assessed the effects of the sprayer nozzle boom height in the distribution of the spray solution for weed control, influencing intoxication of beans and crop yield. Experiments were conducted in laboratory and field conditions. In laboratory, the performance of flat spray tip TT 11002 was assessed at heights 0.20, 0.30, 0.40 and 0.50 meters with respect to the target surface. In the field the same heights were assessed in applications of herbicides fomesafen, fluazifop-P-butyl and fomesafen + fluazifop-P-butyl. There was an inverse relationship between the height of the spray boom and the coefficients of variation of the patterns. The mixture better efficiency in a tank of fluazifop-P-butyl + fomesafen was obtained with the height of 0.50 m from the target. This treatment resulted in better weed control, lower poisoning of the bean plants and better crop yield rates.

Diameter and height distributions in a gallery forest tree community and some of its main species in central Brazil over a six-year period (1985-1991)

(Diameter and height distributions in a gallery forest tree community and some of its main species in central Brazil over a six-year period (1985-1991)). The diameter and height structure were studied over six years in approximately 64 ha of the Gama gallery forest in Brasília, DF. Trees from 10 cm dbh were measured every three years from 1985 in 151 (10 x 20 m) permanent plots. Natural regeneration (individuals under 10 cm dbh) was measured in subplots within the 200 m² plots. Most individuals and species were under 45 cm diameter and 20 m high while the maximum diameter for individual species ranged from 30 to 95 cm. The diameter structure was typical of a mixed tropical forest with the number of individuals decreasing with increasing size classes and showing little change over the six years. The most abundant species occupy different positions in the canopy and have different size structures.

Plant height reduction in populations of triticale (X triticosecale Wittmack) by induced mutations and artificial crosses

Induced mutations by gamma radiation (0, 5, 10, 20 and 40 kR doses) and reciprocal crosses were tested as mechanisms of enhancing genetic variability for plant height in two triticale cultivars, BR4 and EMBRAPA18. The reciprocal crosses and all doses of radiation showed similar increase in genetic amplitude for this trait, being suitable for increasing variability in breeding programs. Genotypes showed different responses as the gamma ray doses were increased, expressing shorter plant height. The decision of using induced mutations or artificial crosses depends on the resources available and the selection method to be used