Effect of Oven Heating Time of Asphaltic Concrete on Marshall Stability, MLR-82-02, 1982

It has been observed in the Laboratory that an increase in oven heating time of relatively short duration between mixing and compaction of asphaltic concrete hot mixes can have an effect on the Marshall stability results obtained. The purpose of this short investigation is to determine the effect of oven heating time on the density and stability of hot mixes.

Predictors of mortality from pump failure and sudden cardiac death in patients with systolic heart failure and left ventricular dyssynchrony: results of the CARE-HF trial.

BACKGROUND: Determining a specific death cause may facilitate individualized therapy in patients with heart failure (HF). Cardiac resynchronization therapy (CRT) decreased mortality in the Cardiac Resynchronization in Heart Failure trial by reducing pump failure and sudden cardiac death (SCD). This study analyzes predictors of specific causes of death. METHODS AND RESULTS: Univariate and multivariate analyses used 8 baseline and 3-month post-randomization variables to predict pump failure and SCD (categorized as "definite," "probable," and "possible"). Of 255 deaths, 197 were cardiovascular. There were 71 SCDs with a risk reduction by CRT of 0.47 (95% confidence interval 0.29-0.76; P = .002) with similar reductions in SCD classified as definite, probable, and possible. Univariate SCD predictors were 3-month HF status (mitral regurgitation [MR] severity, plasma brain natriuretic peptide [BNP], end-diastolic volume, and systolic blood pressure), whereas randomization to CRT decreased risk. Multivariate SCD predictors were randomization to CRT 0.56 (0.53-0.96, P = .035) and 3-month MR severity 1.82 (1.77-2.60, P = .0012). Univariate pump failure death predictors related to baseline HF state (quality of life score, interventricular mechanical delay, end-diastolic volume, plasma BNP, MR severity, and systolic pressure), whereas randomization to CRT and nonischemic cardiomyopathy decreased risk; multivariate predictors of pump failure death were baseline plasma BNP and systolic pressure and randomization to CRT. CONCLUSION: CRT decreased SCD in patients with systolic HF and ventricular dyssynchrony. SCD risk was increased with increased severity of MR (including the 3-month value for MR as a time-dependent covariate) and reduced by randomization to CRT. HF death was increased related to the level of systolic blood pressure, log BNP, and randomization to CRT. These results emphasize the importance and interdependence of HF severity to mortality from pump failure and SCD.

Savukaasujen mittausjärjestelmän kehittäminen jätteen rinnakkaispolttolaitoksessa

Virtain kaupungissa sijaitseva vuodesta –79 toiminut lämpövoimala on pääasiassa kotimaisia polttoaineita käyttävä kaukolämpöä tuottava voimalaitos. Jätemurskeen (REF) osuus on tällä hetkellä noin 10 % laitoksen lämmöntuotosta. REF valmistetaan paikallisesti ja sen tuotantoa on tarkoitus lisätä lähivuosina voimakkaasti. EU:n uusi todennäköisesti loppuvuodesta-2000 hyväksyttävä jätteenpolttoa koskeva direktiivi asettaa jätteen rinnakkaispolttolaitoksille tiukat päästörajat ja mittausvelvoitteet. Tämä lisää tuntuvasti kustannuksia Virtain laitoksen kaltaisissa pienissä kierrätyspolttoainetta hyödyntävissä laitoksissa. Työssä selvitettiin jätteenpolttodirektiivistä aiheutuvat savukaasujen mittaamisen kokonaiskustannukset Virroilla. Taloudellisimman mittausjärjestelmän vuo-tuisiksi kokonaiskustannuksiksi saatiin 180 000 mk jakautuen seuraavasti: Jatkuvatoimiset mittauslaitteet käyttökuluineen 90 000 mk, jaksottaiset HF, HCl ja SO2 -mittaukset 20 000 mk, raskasmetallien, dioksiinien ja furaanien määräaikainen mittaaminen 40 000 mk ja vertailumittaukset 30 000 mk.

Effect of heating oxyhemoglobin and methemoglobin on microsomes oxidation.

Hemoglobin (Hb) has been proposed to be a major pro-oxidant in raw and cooked meats. To understand the mechanisms and differentiate between the pro-oxidant and antioxidant potential of oxyhemoglobin (OxyHb) and methemoglobin (MetHb), their pro-oxidant activity, protein solubility, radical scavenging capacity, iron content and contribution of non-chelatable iron on lipid oxidation were determined as a function of thermal treatments. The ability of native OxyHb and MetHb to promote lipid oxidation was similar and higher than their corresponding OxyHb or MetHb heated at 68 and 90 degrees C but not different from those at 45 degrees C. The pro-oxidant activity of MetHb heated at 68 and 90 degrees C were similar whereas the pro-oxidant activity of OxyHb heated at 68 degrees C was higher than that heated at 90 degrees C. The decreased pro-oxidant activity of heat-denatured Hb was associated with a decrease in the solubility of heme iron while free iron showed little impact on the lipid oxidation.

Life cycle costs in heating, ventilation and air-conditioning systems with drive

Energy consumption and energy efficiency have become an issue. Energy consumption is rising all over the world and because of that, and the climate change, energy is becoming more and more expensive. Buildings are major consumers of energy, and inside the buildings the major consumers are heating, ventilation and air-conditioning systems. They usually run at constant speed without efficient control. In most cases HVAC equipment is also oversized. Traditionally heating, ventilation and air-conditioning systems have been sized to meet conditions that rarely occur. The theory part in this thesis represents the basics of life cycle costs and calculations for the whole life cycle of a system. It also represents HVAC systems, equipment, systems controls and ways to save energy in these systems. The empirical part of this thesis represents life cycle cost calculations for HVAC systems. With these calculations it is possible to compute costs for the whole life cycle for the wanted variables. Life cycle costs make it possible to compare which variable causes most of the costs from the whole life point of view. Life cycle costs were studied through two real life cases which were focused on two different kinds of HVAC systems. In both of these cases the renovations were already made, so that the comparison between the old and the new, now existing system would be easier. The study indicates that energy can be saved in HVAC systems by using variable speed drive as a control method.

House heating in Finland and Russia

Achievement of house heating efficiency is one of key questions in building construction field. Finland and nothern part of Russia have similar climate conditions that gives a reason for comparation of their house heating approaches. In this work main questions concerned to house heating energy efficiency are studied, building norms and standards of Russia and Finland are studied and compared from heat storage efficiency point of view, review of statistics is done, some different factors influencing house heating energy efficiency are derived.

Feasibility Study and Market Review of Small Scale Bioenergy Heating Plants in North-West Russia

The paper is focused on feasibility study and market review of small scale bioenergy heating plants in the Russian North-West region. The main focus is effective and competitive usage of low-grade wood for heating purposes in the region. As example of economical feasibility estimation it was chosen the project of reconstruction of small scale boiler plant in Leningrad region that Brofta Oy is planning to implement the nearest time. It includes calculation the payback time with and without interest, the estimation of probable investments, the evaluation of possible risks and research on the potential of small scale heating plants projects. Calculations show that the profitability of this kind of projects is high, but payback time is not very short, because of high level of initial investments. Though, the development of small scale bioenergy heating plants in the region is considered to be the best way to solve the problems of heat supply in small settlements using own biomass resources.

Recuperação de metais de catalisadores mássicos e monometálicos

This work presents a study on the dissolution of some commercial monometallic and non-supported deactivated catalysts in HF + H2O2 mixtures (and, eventually, other media) under mild experimental conditions, after a previous oxidation step. The samples were neither crushed nor grinded. The best experimental conditions were dependent on the nature of the support and of the active phase. For example, the Pt/Al2O3 catalyst was dissolved in about 10 minutes, without agitation and heating; however, dissolution of the Pd/Al2O3, Ni/Al2O3, Ni/SiO2, Cu/Al2O3 and V2O5 samples required a temperature of 60 ºC and an agitation of 400 rpm. A careful addition of a NaOH solution allowed a quantitative precipitation of aluminium as criolite (Na3AlF6) or precipitation of Si as Na2SiF6; NaF was obtained as a by-product. As expected, processing of Pd/C, V2O5 and CuO.Cr2O3 samples was relatively simple. Metals recovery from catalysts reached a quantitative level in all samples studied; it is particularly interesting that platinum and palladium could be easily recovered in a single step process, thus separing them from aluminium.

O uso de pseudopotenciais e modelos HF/MP2/DFT na previsão de freqüências vibracionais em complexos metálicos

Four different pseudopotentials and three methodologies were employed in the calculation of the geometry and the frequencies of metal complexes like [M(NH3)2X2] [X=halogen, M=Zn, Cd], and [Hg(NH3)2]Cl2. The vibrational assignments were carefully checked and compared to the theoretically calculated ones. Graphical procedures were employed to estimate family errors and their average behavior. The calculated results show the SBK-X basis set with the best results for the geometries and calculated frequencies, for individual species and statistical results. Its use is recommend, mainly if the neighborhood atoms are described with similar pseudopotentials. Excellent results were also obtained with the Hay and Wadt pseudopotential.

Decomposição de argilas em forno de microondas e determinação simultânea dos seus constituintes principais por espectrometria de emissão óptica em plasma indutivamente acoplado

In this work a closed-vessel microwave-assisted acid decomposition procedure for clays was developed. Aluminum, Ca, Fe, K, Mg, Na, Si, and Ti were determined in clay digestates by inductively coupled plasma optical emission spectrometry. The most critical parameter for total decomposition of clays was the composition of the reagent mixture. The applied power and the heating time exerted a less critical influence. Best decomposition conditions were attained using a reagent mixture containing 4 mL aqua regia plus 3 mL HF and the heating program was implemented in 12 min. The accuracy of the results was demonstrated using two standard reference materials and a paired t-test showed a good agreement between determined and certified values at a 95% confidence level.

Tanke-försök til närmare utredande af mechaniska häf-tyget

Invocatio: M.G.H.

Estudo comparativo de métodos de preparo de amostras de tinta para a determinação de metais e metalóides por técnicas de espectrometria atômica

This work deals with paint decomposition methods for major, minor and trace elements determination. Three methods were investigated: (1) decomposition in closed quartz vessel and heating in microwave oven; (2) decomposition in open vessel using HNO3 and ashing, following the ASTM D 3335-85a method; and (3) decomposition in open vessel using HNO3 + HF and ashing. Paints of different types and colours were analyzed, in which several elements were determined using inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP OES). It was observed that method (1) is appropriate for trace, minor and major elements determination, while method (3) is appropriate for Ti.

Estudo das ligações de hidrogênio para dímeros formados pelas moléculas de H2O, NH3, HF, HCl e HBr através de cálculos baseados em primeiros princípios

Hydrogen bond energies of fifteen dimers were calculated using the large basis set 6-311++G(3df,3pd), at Hartree-Fock (HF) level including Møller-Plesset (MP2) calculations. The procedure for obtaining such energies were based on the dimer's energy rise provoked by increasing in intermolecular distance of the system component units. Deviations from a strictly linear hydrogen bond were investigated and rotational barriers were also computed allowing the calculation of the second order attractive interactions. In order to provide a more objective definition of hydrogen bond, a lower energy limit was proposed in place of the merely empirical parameters employed in the classical definition

A FORMAÇÃO DE LIGAÇÕES DE HIDROGÊNIO π‧‧‧H, F‧‧‧H E C‧‧‧H NOS COMPLEXOS C2H2‧‧‧(HF), C2H2‧‧‧2(HF) E C2H2‧‧‧3(HF)

In this work, a theoretical study on the basis of structural, vibrational, electronic and topological parameters of the C2H2‧‧‧(HF), C2H2‧‧‧2(HF) and C2H2‧‧‧3(HF) complexes concerning the formation of π‧‧‧H, F‧‧‧H and C‧‧‧H hydrogen bonds is presented. The main difference among these complexes is not properly the interaction strength, but the hydrogen bond type whose benchmark is ruled justly by the structure. Meanwhile, the occurrence of π‧‧‧H hydrogen bonds was unveiled in both C2H2‧‧‧(HF) dimer and C2H2‧‧‧3(HF) tetramer, although in latter, this interaction is stronger than C‧‧‧H of the C2H2‧‧‧2(HF) trimer. However, the F‧‧‧H hydrogen bonds within the subunits of hydrofluoric acid are the strongest ones, reaching a partial covalent limit, and thereby contribute decisively to the stabilization of the tetramer structure. In line with this, the largest red-shifts were observed on the hydrofluoric acid trimer of the C2H2‧‧‧3(HF) complex.