Effects of trawling for ocean shrimp (Pandalus jordani) on macroinvertebrate abundance and diversity at four sites near Nehalem Bank, Oregon

Surveys with a remotely operated vehicle (ROV) at four mudhabitat sites with different histories of ocean shrimp (Pandalus jordani) trawling showed measurable effects of trawling on macroinvertebrate abundance and diversity. Densities of the sea whip (Halipteris spp., P<0.01), the flat mud star (Luidia foliolata, P< 0.001), unidentified Asteroidea (P<0.05), and squat lobsters (unidentified Galathoidea, P<0.001) were lower at heavily trawled (HT) sites, as was invertebrate diversity based on the Shannon-Wiener index. Sea cucumbers (unidentified Holothuroidea) and unidentified corals (Hydrocoralia) were observed at lightly trawled (LT) sites but not at HT sites. Hagfish (Eptatretus spp.) burrows were the dominant structural feature of the sediment surface at all sites and were more abundant at the HT sites (P<0.05), a result potentially related to effects from fishery discards. Substantial heterogeneity was found between the northern and southern site pairs, indicating high site-to-site variability in macroinvertebrate densities in these deep (146–156 m) mud habitats. Two of the study sites were closed to trawling in June 2006. The data from this study can be used in combination with future surveys to measure recovery rates of deep, mud, seaf loor habitats from the effects of trawling, thus providing a critical piece of information for ecosystem-based management.

Climatic factors associated with phytoplankton community succession during and after the 1977 drought for the San Francisco Bay-Delta Estuary [abstract]

Principal coordinates analysis and multiple regression analysis were used to determine the environmental factors associated with the decline in phytoplankton production during and after the 1977 drought for the San Francisco Bay-Delta Estuary. Physical, chemical and biological data were collected semimonthly or monthly during the spring-summer between 1973 and 1982 from 15 sampling sites located throughout the Bay-Delta. A decline in phytoplankton community diversity and density during the 1977 drought and subsequent years (1978 through 1981) was described using principal coordinates analysis. The best multiple regression which described the changes in phytoplankton community succession contained the variables water temperature, wind velocity and ortho-phosphate concentration. Together these variables accounted for 61 percent of the variation in the phytoplankton community among years described by principal coordinates analysis. An increase in water temperature, wind velocity and ortho-phosphate concentration within the Bay-Delta, beginning in June 1976 and continuing through 1981, was demonstrated using weighted moving averages. From the strong association between phytoplankton community succession and climatic variables it was hypothesized that the decline in phytoplankton production during and after the 1977 drought was associated with climatic changes within the northeast Pacific.

Length and age at maturity of female petrale sole (Eopsetta jordani) determined from samples collected prior to spawning aggregation

The problem of bias in female petrale sole age and length-at-maturity relationships caused by sampling from spawning aggregations was investigated. Samples were collected prior to aggregation, and histological methods were used to determine maturity status. Mature and immature fish were classified by inspecting oocytes for the presence of yolk in September, when substantial divergence in yolked and unyolked oocyte diameters had been observed. Comparison of macroscopic and microscopic assessment of maturity showed that maturity status cannot be determined accurately by using macroscopic inspection during the summer. Female petrale sole from the central Oregon coast were 50% mature at 33 cm and 5 years of age. Comparison of data from our study with data used in recent petrale sole stock assessments showed that both sampling bias and the use of samples from sea-sons when status cannot be accurately determined have likely caused errors in fitted maturity relationships.

New insights to the molecular phylogenetics and generic assessment in the Rhacophoridae (Amphibia: Anura) based on five nuclear and three mitochondrial genes, with comments on the evolution of reproduction

The phylogenetic relationships among 12 genera of treefrogs (Family, Rhacophoridae), were investigated based on a large sequence data set, including five nuclear (brain-derived neurotrophic factor, proopiomelanocortin, recombination activating gene 1, tyr

Genome 10K: A Proposal to Obtain Whole-Genome Sequence for 10 000 Vertebrate Species

The human genome project has been recently complemented by whole-genome assessment sequence of 32 mammals and 24 nonmammalian vertebrate species suitable for comparative genomic analyses. Here we anticipate a precipitous drop in costs and increase in sequ

Phylogeny of the Asian spiny frog tribe Paini (Family Dicroglossidae) sensu Dubois

The anuran tribe Paini, family Dicroglossidae, is known in this group only from Asia. The phylogenetic relationships and often the taxonomic recognition of species are controversial. In order to stabilize the classification, we used approximately 2100bp o

A mitogenomic perspective on the ancient, rapid radiation in the Galliformes with an emphasis on the Phasianidae

Background: The Galliformes is a well-known and widely distributed Order in Aves. The phylogenetic relationships of galliform birds, especially the turkeys, grouse, chickens, quails, and pheasants, have been studied intensively, likely because of their close association with humans. Despite extensive studies, convergent morphological evolution and rapid radiation have resulted in conflicting hypotheses of phylogenetic relationships. Many internal nodes have remained ambiguous. Results: We analyzed the complete mitochondrial (mt) genomes from 34 galliform species, including 14 new mt genomes and 20 published mt genomes, and obtained a single, robust tree. Most of the internal branches were relatively short and the terminal branches long suggesting an ancient, rapid radiation. The Megapodiidae formed the sister group to all other galliforms, followed in sequence by the Cracidae, Odontophoridae and Numididae. The remaining clade included the Phasianidae, Tetraonidae and Meleagrididae. The genus Arborophila was the sister group of the remaining taxa followed by Polyplectron. This was followed by two major clades: ((((Gallus, Bambusicola) Francolinus) (Coturnix, Alectoris)) Pavo) and (((((((Chrysolophus, Phasianus) Lophura) Syrmaticus) Perdix) Pucrasia) (Meleagris, Bonasa)) ((Lophophorus, Tetraophasis) Tragopan))). Conclusions: The traditional hypothesis of monophyletic lineages of pheasants, partridges, peafowls and tragopans was not supported in this study. Mitogenomic analyses recovered robust phylogenetic relationships and suggested that the Galliformes formed a model group for the study of morphological and behavioral evolution.

Exaggerated Status of

Given its relative ease, screening the entire mitochondrial DNA (mtDNA) for heteroplasmic or novel homoplasmic mutations has become part of the routine diagnostic workup for the molecular geneticist confronted with a disease case exhibiting clinical and b

Integration' in the US coastal zone management program

The purpose of this paper is to examine the extent to which the existing US Coastal Zone Management (CZM) program represents Integrated Coastal Management (ICM). The actions taken at Rio de Janeiro in June 1992 as part of the United Nations Conference on Environment and Development (UNCED) could eventually impact the policies of the US in such a way as to encourage better integration of US coastal and ocean management efforts.

Exploiting the bioactive potential of marine sponge microbiota

Endospore-forming bacteria are often isolated from different marine sponges, but their abundance varies, and they are frequently missed by culture-independent studies. Within endospore-formers, Bacillus are renowned for the production of antimicrobials and other compounds of medical and industrial importance. Although this group has been well studied in many different environments, very little is known about the actual diversity and properties of sporeformers associated with marine sponges. Identification of the endospore-forming bacteria associated with the marine sponges; Haliclona simulans, Amphilectus fucorum and Cliona celata, has uncovered an abundant and diverse microbial population composed of Bacillus, Paenibacillus, Solibacillus, Halobacillus and Viridibacillus species. This diversity appears to be overlooked by other non-targeted approaches where spore-formers are masked by more dominant species within the ecosystem. In addition to the identification of two antibiotic resistant plasmids, this bank of sporeformers produce a range of bioactive compounds. New antimicrobial compounds are urgently needed to combat the spread of multidrug resistant pathogens, as few new options are entering the drug discovery pipelines for clinical trials. Based on the results of this project, endospore-formers associated with marine sponges may hold the answer. The power of coupling functional based assays with genomic approaches has enabled us to identify a novel class 1 lantibiotic, subtilomycin, which is active against several clinically relevant pathogens. Subtilomycin is encoded in the genomes of all the marine sponge B. subtilis isolates analysed. They cluster together phylogenetically and form a distinct group from other sequenced B. subtilis strains. Regardless of its potential clinical relevance, subtilomycin may be providing these strains with a specific competitive advantage(s) within the stringent confines of the marine sponge environment. This work has outlined the industrial and biotechnological potential of marine sponge endospore-formers which appear to produce a cocktail of bioactive compounds. Genome sequencing of specific marine sponge isolates highlighted the importance of mining extreme environments and habitats for new lead compounds with potential therapeutic applications.

Estimating the distribution of malaria in Namibia in 2009: assembling the evidence and modeling risk

info:eu-repo/semantics/published

Computational modelling for reliable flip-chip packaging at sub-100 micron pitch using isotropic conductive adhesives

This paper presents the assembly process using next generation electroformed stencils and Isotropic Conductive Adhesives (ICAs) as interconnection material. The utilisation of ICAs in flip-chip assembly process is investigated as an alternative to the lead and lead-free solder alloys and aims to ensure a low temperature (T < 100 °C) assembly process. The paper emphasizes and discusses in details the assembly of a flip-chip package based on copper columns bumped die and substrate with stencil printed ICA deposits at sub-100 μm pitch. A computational modelling approach is undertaken to provide comprehensive results on reliability trends of ICA joints subject to thermal cycling of the flip-chip assembly based on easy to use damage criteria and damage evaluation. Important design parameters in the package are selected and investigated using numerical modelling techniques to provide knowledge and understanding of their impact on the thermo-mechanical behaviour of the flip-chip ICA joints. Sensitivity analysis of the damage in the adhesive material is also carried out. Optimal design rules for enhanced performance and improved thermo-mechanical reliability of ICA assembled flip-chip packages are finally formulated.

Ultra-fine pitch stencil printing for a low cost and low temperature flip-chip assembly process

This paper presents the results of a packaging process based on the stencil printing of isotropic conductive adhesives (ICAs) that form the interconnections of flip-chip bonded electronic packages. Ultra-fine pitch (sub-100-mum), low temperature (100degC), and low cost flip-chip assembly is demonstrated. The article details recent advances in electroformed stencil manufacturing that use microengineering techniques to enable stencil fabrication at apertures sizes down to 20mum and pitches as small as 30mum. The current state of the art for stencil printing of ICAs and solder paste is limited between 150-mum and 200-mum pitch. The ICAs-based interconnects considered in this article have been stencil printed successfully down to 50-mum pitch with consistent printing demonstrated at 90-mum pitch size. The structural integrity or the stencil after framing and printing is also investigated through experimentation and computational modeling. The assembly of a flip-chip package based on copper column bumped die and ICA deposits stencil printed at sub-100-mum pitch is described. Computational fluid dynamics modeling of the print performance provides an indicator on the optimum print parameters. Finally, an organic light emitting diode display chip is packaged using this assembly process