Biodegradation of polyurethane derived from castor oil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Compostagem de resíduos sólidos de frigorífico

Composting has been a viable and efficient alternative treatment to agroindustrial waste. This experiment was installed with the objective of analyzing the process of composting for slaughterhouse waste. Twelve piles of composting were prepared, using slaughterhouse waste, wheat straw and wood sawdust. The process was evaluated by daily temperature monitoring, observations of the occurrence of undesirable parameters (bad smell and/or ammoniacal smell, grease formation and presence of grubs and flies), as well as the capacity of recycling nutrients. The undesirable parameters were observed, on average, for the first five days after pile building; the temperatures increased, reaching 70 °C; chemical composition of compost showed relevant contents of macro and micronutrients, a high recycling potential. Utilization of impermeable floor and roof are recommended during the composting. The turning frequency used (15 days after pile building followed by turning) was adequate. The best relation of weight was 7.2 kg of waste for each kg of straw and 16.6 kg of waste for each kg of sawdust.

The use of slot filter in piezocone tests for site characterization of tropical soils

The use of piezocone tests with a slot filter filled with automotive grease for site characterization of tropical soils is assessed. Laboratory tests using the slot filter filled with automotive grease as well as the conventional porous piezo-element saturated with glycerin were carried out to evaluate the pore pressure (u 2) transducer response. CPTu tests using piezo-elements saturated with glycerin and the slot filter filled with grease were pushed side by side in different research sites in Brazil. Estimates of mechanical and hydraulic soil parameters were made based on pore pressure dissipation curves from using both techniques. Laboratory test results indicate that the pore pressure response using the slot filter with grease was delayed when compared to the piezo-element saturated with glycerin, since grease has a higher viscosity. For tropical soils, the records of u2 in piezocone tests using slot filter with grease presented larger peaks than with porous element saturated with glycerin. Records of u2 using the slot filter above the groundwater table suggest the increase of the degree of saturation in unsaturated zone, where porous filter can be desaturated by suction. The slot filter can be used to help the interpretation of the soil profile with deep groundwater level as well as to help detecting its position for some studied soils. The results shown high repeatability for all study sites. This technique is much easier to handle, especially for tropical soils, where the groundwater table is usually deep and pre-drilling is expensive and time consuming. © 2009 IOS Press.

Potencialidades da mandioquinha-salsa (Arracacia xanthorrhiza Brancroft) para processamento industrial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Eficiência econômica e energética do bicultivo de peixes na região do Médio Paranapanema, Estado de São Paulo: Fernanda de Paiva Badiz Furlaneto. -

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Crescimento de Rubrivivax gelatinosus em efluente industrial de abate e processamento de tilápias

Pós-graduação em Ciência Animal - FMVA

Monitoramento e avaliação da condição de um sistema propulsor aeronaútico através de técnicas de análise de partículas em óleos lubrificantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estratégias de suplementação na recria e terminação de bovinos de corte

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Espectroscopia Raman aplicado ao beta-caroteno

Os óleos vegetais vêm sendo estudados, por alguns anos, de forma intensiva. Entretanto o estudo dessas substâncias apresenta certa dificuldade pelo fato destes óleos apresentarem composições químicas muito complexas. Neste estudo apresentado em forma de dissertação, apresentaremos algumas das formas variadas do espectro Raman do Beta-caroteno e do óleo de buriti em diferentes concentrações e em diferentes meios. O óleo de buriti é uma substância que possui muitas propriedades, entre elas propriedades ópticas e medicinais. É formado por uma composição de várias substâncias graxas e não graxas. Duas das substâncias encontradas no OB também fazem parte de nosso estudo que são o beta-caroteno e o ácido oleico. O beta-caroteno é um carotenoide precursor da vitamina A, muito encontrado em frutos e verduras que apresentam coloração vermelho-alaranjado. O ácido oleico é um ácido graxo muito importante e está presente, quase sempre em grande concentração, na maioria dos óleos vegetais. Com o intuito de estudarmos os espectros Raman desses materiais foram dissolvidos 6,1 mg de beta-caroteno em 50 ml de ácido oléico chamado de solução base. A partir dessa solução, foram misturadas diferentes quantidades de ácido oleico a fim de obtermos soluções mais diluídas, gerando assim soluções de concentrações menores que a solução base, até ser atingido uma concentração próxima a 0% de beta-caroteno. Todas as soluções foram submetidas a agitação mecânica. Uma em especial foi submetida a agitação tanto mecânica quanto ao Ultra-Som. As blendas de PMMA modificados com óleo de buriti foram fabricadas no Laboratório de Químico Física da UNB, numa parceria do Grupo de Polímeros da UNB e do Grupo de Física de Materiais da Amazônia da UFPA. Os resultados mostram que as intensidades Raman aumentam ou diminuem, conforme a concentração de beta-caroteno na solução e de óleo de buriti na blenda. Mostra que em 1656 cm^-1 aparece um pico referente a presença de óleo de buriti na blenda e o deslocamento de alguns modos em algumas regiões do espectro da blenda. Com relação ao espectro da solução foi identificado mudança na solução submetida ao ultra-som com o desaparecimento de alguns modos refrentes ao ácido oleico e ao beta caroteno.

Produção de biossurfactantes utilizando resíduos agroindustriais como substrato

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seleção de micro-organismos com potencial de biodegradação de hidrocarbonetos e biodiesel

The oil and biodiesel are oily substances which, if spilled or thrown out in the environment, can cause serious damages. In this context, bioremediation techniques can be used to the recovering of sites degradated by mineral or vegetable oil, besides them, the biodegradation. However, it is necessary that there are microorganism strains used to degradate the contaminant, previously selected for the fast, efficient and minimum impact remediation. The main objective of this study was to isolate microorganism strains coming from different ecological recesses and verify their potentiality on biodegradating oil and biodiesel. Strains of bacteria, fungi and yeasts were isolated from soils contaminated by hydrocarbons (diesel, gasoline, grease) before, by doing striations on culture plates. On the biodegradation tests, it was used the redox indicator, 2,6-dichlorophenol indophenol (DCPIP), then, after the indicador’s discoloration, the absorbance of the suspension obtained was measured. 46 different microorganism strains were isolated, and the oil, when it was used as a carbon resource, it was degradate easier than the biodiesel. The experiments showed that, in a period, the site impacted by oil spills recovers itself by the biodegradation, in aerobic conditions, by the redox activity.

Índice de análise ambiental simplificado na avaliação de impactos nos recursos hídricos da bacia hidrográfica do Ribeirão do Meio, Leme, São Paulo, Brasil

This study evaluated environmental impacts at Meio Creek watershed, Leme, Sao Paulo, Brazil. A simplified environmental analysis index was applied correlating land use and occupation (vegetation elimination or modification, wildlife, color, smell, grease, oils, foams, larvae and red worms) with water quality parameters (conductivity, dissolved oxygen, pH and temperature). The simplified environmental analysis index showed that 27.8% visited places had a high or worrying environmental impact and 5.6% had a really high impact. As to the results of physical and chemical parameters, pH and conductivity values showed the conditions and standards that water Class 2 and 3 should have. These parameters were not the same for dissolved oxygen levels at most of the analyzed points. Despite the current environmental legislation at federal, state and municipal levels, Leme city does not have an effective environmental plan to control and protect springs and Meio Creek watershed and its tributaries.

Alterações na composição química e sensorial de café (Coffea arabica L.) nos processos pós-colheita

An interdisciplinary study was conducted to evaluate the effects of drying and storage time on changes in the quality of natural and fully washed coffees beans dried out in the yard and mechanically dried at a temperature of 60/40°C in air dryer machine. The coffee beans (Coffea arabica L.) harvested in cherries were processed by dry and wet methods, being subjected to pre-drying yard, followed by drying yard in the sun with air heated of 60/40°C until it reached the water content of 11% (wb). After reached the thermal equilibrium with the environment, the beans were packed in jute bag with a capacity of five kilograms and stored in uncontrolled environment during the period of one year, and removing material from each treatment every three months. To characterize the effect of drying and storage time on the coffee quality different methodologies was evaluated. It was observed less drying time for the fully washed coffee 60/40°C, and thus less energy consumed in the drying process until the point of storage, for the natural coffee there was significant effect of time on the chemical quality, biochemical and sensory; fully washed coffee proved to be more tolerant to drying than natural coffee, regardless of drying method, showing a better drink quality and less variation in chemical composition and biochemistry.

Composição físico-química e cor de clones de mandioquinha-salsa

This study aimed to characterize the physical and chemical composition of ten items of arracacha grown in the municipality of São Manuel for the 2009 harvest. In the roots of the clones BGH (4560, 5741, 5744, 5746, 5747, 6414, 6513, 6525 and 7609) and the cultivar Amarela de Senador Amaral the characteristics evaluated were: color (L *, a * and b *) and moisture, ash, crude fiber, raw grease, protein, reducing sugars, total sugars and starch. After obtaining the data, an analysis was performed for the variance of test F and comparisons between the means made by the Tukey test at 5% probability. There was no significant difference to the results of luminosity (L *) while BGH 6414 and BGH 5744 showed the highest values for chroma and * BGH 5741, BGH 6414, BGH 7609, 'Amarela de Senador Amaral' BGH 5747 presented the highest chroma values for b *. Clones BGH 7609 and BGH 6414 showed significantly higher levels of dry matter and with the potential yield of agro-industrial processes it would be best suited in the form of frying. The materials that showed significantly larger amounts of ash were BGH 6525, BGH 5747, 'Amarela de Senador Amaral ", BGH 4560, BGH 5746, BGH 6513. Regarding the contents of fatty matter BGH 6525, BGH 5741 and BGH 5744 showed the highest levels. The results of BGH 7609 showed crude fiber significantly higher than the other materials tested, it can be used in diets composed of fibers. BGH 4560 and cultivar had the highest crude protein. BGH 5741 showed the lowest reducing sugar content among the clones, but not significantly different from results found for the cultivar. All clones showed total sugar levels were higher in the cultivar, which may have more flavor. BGH 5741, BGH 5746, BGH 6525 and BGH 6513 showed significantly higher starch content than the cultivar Amarela de Senador Amaral. From these results we conclude that the clones have similar color characteristics, and are potentially a nutritionally adequate substitute for the cultivar.

A study of high solids anaerobic digestion of Bucknell University food waste followed by aerobic curing

Anaerobic digestion of food scraps has the potential to accomplish waste minimization, energy production, and compost or humus production. At Bucknell University, removal of food scraps from the waste stream could reduce municipal solid waste transportation costs and landfill tipping fees, and provide methane and humus for use on campus. To determine the suitability of food waste produced at Bucknell for high-solids anaerobic digestion (HSAD), a year-long characterization study was conducted. Physical and chemical properties, waste biodegradability, and annual production of biodegradable waste were assessed. Bucknell University food and landscape waste was digested at pilot-scale for over a year to test performance at low and high loading rates, ease of operation at 20% solids, benefits of codigestion of food and landscape waste, and toprovide digestate for studies to assess the curing needs of HSAD digestate. A laboratory-scale curing study was conducted to assess the curing duration required to reduce microbial activity, phytotoxicity, and odors to acceptable levels for subsequent use ofhumus. The characteristics of Bucknell University food and landscape waste were tested approximately weekly for one year, to determine chemical oxygen demand (COD), total solids (TS), volatile solids (VS), and biodegradability (from batch digestion studies). Fats, oil, and grease and total Kjeldahl nitrogen were also tested for some food waste samples. Based on the characterization and biodegradability studies, Bucknell University dining hall food waste is a good candidate for HSAD. During batch digestion studies Bucknell University food waste produced a mean of 288 mL CH4/g COD with a 95%confidence interval of 0.06 mL CH4/g COD. The addition of landscape waste for digestion increased methane production from both food and landscape waste; however, because the landscape waste biodegradability was extremely low the increase was small.Based on an informal waste audit, Bucknell could collect up to 100 tons of food waste from dining facilities each year. The pilot-scale high-solids anaerobic digestion study confirmed that digestion ofBucknell University food waste combined with landscape waste at a low organic loading rate (OLR) of 2 g COD/L reactor volume-day is feasible. During low OLR operation, stable reactor performance was demonstrated through monitoring of biogas production and composition, reactor total and volatile solids, total and soluble chemical oxygendemand, volatile fatty acid content, pH, and bicarbonate alkalinity. Low OLR HSAD of Bucknell University food waste and landscape waste combined produced 232 L CH4/kg COD and 229 L CH4/kg VS. When OLR was increased to high loading (15 g COD/L reactor volume-day) to assess maximum loading conditions, reactor performance became unstable due to ammonia accumulation and subsequent inhibition. The methaneproduction per unit COD also decreased (to 211 L CH4/kg COD fed), although methane production per unit VS increased (to 272 L CH4/kg VS fed). The degree of ammonia inhibition was investigated through respirometry in which reactor digestate was diluted and exposed to varying concentrations of ammonia. Treatments with low ammoniaconcentrations recovered quickly from ammonia inhibition within the reactor. The post-digestion curing process was studied at laboratory-scale, to provide a preliminary assessment of curing duration. Digestate was mixed with woodchips and incubated in an insulated container at 35 °C to simulate full-scale curing self-heatingconditions. Degree of digestate stabilization was determined through oxygen uptake rates, percent O2, temperature, volatile solids, and Solvita Maturity Index. Phytotoxicity was determined through observation of volatile fatty acid and ammonia concentrations.Stabilization of organics and elimination of phytotoxic compounds (after 10–15 days of curing) preceded significant reductions of volatile sulfur compounds (hydrogen sulfide, methanethiol, and dimethyl sulfide) after 15–20 days of curing. Bucknell University food waste has high biodegradability and is suitable for high-solids anaerobic digestion; however, it has a low C:N ratio which can result in ammonia accumulation under some operating conditions. The low biodegradability of Bucknell University landscape waste limits the amount of bioavailable carbon that it can contribute, making it unsuitable for use as a cosubstrate to increase the C:N ratio of food waste. Additional research is indicated to determine other cosubstrates with higher biodegradabilities that may allow successful HSAD of Bucknell University food waste at high OLRs. Some cosubstrates to investigate are office paper, field residues, or grease trap waste. A brief curing period of less than 3 weeks was sufficient to produce viable humus from digestate produced by low OLR HSAD of food and landscape waste.