A novel application of microwave-assisted extraction of polyphenols from brewer’s spent grain with HPLC-DAD-MS analysis

This paper reports a novel application of microwave-assisted extraction (MAE) of polyphenols from brewer’s spent grains (BSG). A 24 orthogonal composite design was used to obtain the optimal conditions of MAE. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the extraction yield of ferulic acid was investigated through response surface methodology. The results showed that the optimal conditions were 15 min extraction time, 100 °C extraction temperature, 20 mL of solvent, and maximum stirring speed. Under these conditions, the yield of ferulic acid was 1.31±0.04% (w/w), which was fivefold higher than that obtained with conventional solid–liquid extraction techniques. The developed new extraction method considerably reduces extraction time, energy and solvent consumption, while generating fewer wastes. HPLC-DADMS analysis indicated that other hydroxycinnamic acids and several ferulic acid dehydrodimers, as well as one dehydrotrimer were also present, confirming that BSG is a valuable source of antioxidant compounds.

Brewer's spent grain from different types of malt: Evaluation of the antioxidant activity and identification of the major phenolic compounds

The antioxidant activity and phenolic composition of brewer's spent grain (BSG) extracts obtained by microwave-assisted extraction from twomalt types (light and darkmalts) were investigated. The total phenolic content (TPC) and antioxidant activity among the light BSG extracts (pilsen, melano, melano 80 and carared)were significantly different (p b 0.05) compared to dark extracts (chocolate and black types), with the pilsen BSG showing higher TPC (20 ± 1 mgGAE/g dry BSG). In addition, the antioxidant activity assessed by 2,2-diphenyl- 1-picrylhydrazyl, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and deoxyribose assays decreased as a result of increasing kilning temperatures in the following order: pilsen N melano N melano 80 N carared N chocolate N black. HPLC-DAD/ESI-MS/MS analysis indicated the presence of phenolic acids, such as ferulic, p-coumaric and syringic acids, as well as several isomeric ferulate dehydrodimers and one dehydrotrimer. Chocolate and black extracts, obtained frommalts submitted to the highest kilning temperatures, showed the lowest levels of ferulic and p-coumaric acids. These results suggested that BSG extracts from pilsen malt might be used as an inexpensive and good natural source of antioxidants with potential interest for the food, pharmaceutical and/or cosmetic industries after purification.

Pozzolanic activity of oil-refining catalyst: evaluation by electron and atomic microscopy

The reuse of waste fluid catalytic cracking (FCC) catalyst as partial surrogate for cement can reduce the environmental impact of both the oil-refinery and cement production industries [1,2]. FCC catalysts can be considered as pozzolanic materials since in the presence of water they tend to chemically react with calcium hydroxide to produce compounds possessing cementitious properties [3,4]. In addition, partial replacement of cement with FCC catalysts can enhance the performance of pastes and mortars, namely by improving their compressive strength [5,6]. In the present work the reaction of waste FCC catalyst with Ca(OH)2 has been investigated after a curing time of 28 days by scanning electron microscopy (SEM) with electron backscattered signal (BSE) combined with X-ray energy dispersive spectroscopy (EDS) carried out with a JEOL JSM 7001F instrument operated at 15 kV coupled to an INCA pentaFetx3 Oxford spectrometer. The polished cross-sections of FCC particles embedded in resin have also been evaluated by atomic force microscopy (AFM) in contact mode (CM) using a NanoSurf EasyScan 2 instrument. The SEM/EDS results revealed that an inward migration of Ca occurred during the reaction. A weaker outward migration of Si and Al was also apparent (Fig. 1). The migration of Ca was not homogeneous and tended to follow high-diffusivity paths within the porous waste FCC catalyst particles. The present study suggests that the porosity of waste FCC catalysts is key for the migration/reaction of Ca from the surrounding matrix, playing an important role in the pozzolanic activity of the system. The topography images and surface roughness parameters obtained by atomic force microscopy can be used to infer the local porosity in waste FCC catalyst particles (Fig. 2).

Mathematical modelling of shallow flows: closure models drawn from grain-scale mechanics of sediment transport and flow hydrodynamics

Canadian Journal of Civil Engineering 36(10) 1605–16

DU GRAIN À LA MUSIQUE : MANIPULATIONS EN TEMPS RÉEL

Dans cet article, nous présenterons une étude comparative de quelques techniques de manipulation du signal comme la Transformée de Fourier à Court Terme, la Synthèse Granulaire Asynchrone et PSOLA, notamment dans le cadre de leur utilisation en temps réel. Nous présenterons succinctement le fonctionnement de ces trois méthodes dans l’environnement Max / MSP avec l’utilisation de la librairie GABOR. La manipulation des paramètres propres à chaque méthode a des conséquences sur les variables musicales, et l’utilisation de ces méthodes implique des corrélations entre les paramètres techniques du traitement du signal et des attributs musicaux spécifiques. Ainsi, nous essayerons d’explorer les espaces des paramètres et de la perception musicales entre le temps, la période et le spectre (les rythmes, les fréquences et les timbres) en comparant les différentes méthodes en vue de leur croisement dans un système de traitement commun.

Influence of grain size of aggregate in freeze/thaw cycles of lime mortars

XII DBMC – 12th International Conference on Durability of Building Materials and Components, Vol.2, Porto, 2011, p.737-744

Evaluación de aspectos agronómicos, químicos-nutricionales y tecnológicos de lupinos y quínoas. Agronomic, chemical-nutritional and technological evaluation of lupin and quinoa grain crops.

Este proyecto desarrolla estudios multidisciplinarios para contribuir con información avalada por métodos científicos, a propuestas de desarrollos regionales agronómicos y de tecnología de alimentos en la provincia de Córdoba. Se propone realizar evaluaciones de factibilidad de cultivo de variedades de lupinos y quínoas en parcelas experimentales y huertas, verificar las características químico-nutricionales de los granos y establecer mecanismos tecnológicos, para poder presentar productos alimenticios viables de comercialización. Estos granos, poco conocidos en los hábitos nutricionales actuales, fueron considerados desde la antigüedad por distintas civilizaciones, como importantes fuentes de alimento vegetal. En la actualidad la necesidad de contar con nuevas fuentes de alimentos provenientes de sistemas auto-sustentables y manufacturación artesanal, ha llevado investigar alternativas de nuevos cultivos y a revalorizar aquellos que han sucumbido a las tecnologías modernas. Tanto los granos de quínoa como la de los lupinos han cobrado interés a nivel internacional por su alto valor nutricional, farmacológico y por sus cualidades de plantas rústicas a los manejos de cultivo. Es por esas razones, que se propone desarrollar un proyecto de investigación con transferencia de tecnología, para contar con experiencias que permitan establecer los lineamientos agronómicos y de tecnología de alimentos necesarios para promover los granos de lupinos y quínoas dentro de los planes nutricionales de nuestra sociedad. La importancia de este proyecto se fundamenta en la necesidad de buscar nuevas alternativas de cultivos que se adapten a los recursos de clima y suelo en áreas rurales de las sierras de Córdoba y promover nuevos emprendimientos relacionados con los sectores agrícolas y de la alimentación. Para su mejor desarrollo el proyecto está diagramado en tres módulos que cubren las siguientes áreas: Módulo 1, ensayos de cultivo en parcelas experimentales y huertas comunales; Módulo 2, análisis químicos-nutricionales; Módulo 3, diseño y adaptación de equipamiento para la manufacturación de alimentos. La metodología de investigación está ampliamente respaldada por la experiencia que cuenta el equipo de trabajo en los módulos propuestos y que puede ser verificada en la producción científica plasmada en trabajos publicados en revistas con referato nacionales e internacionales, presentaciones a congresos y direcciones de tesis.

Triticales y tricepiros: alternativas para la produccion de pasto y grano. Forage and grain breeding of triticale and tricepiro.

La introducción de nuevos recursos genéticos es esencial en la evolución de la agricultura destinada a la producción de materia prima de alta calidad. La evaluación de nuevo germoplasma, con el objetivo de su difusión comercial o incorporación a programas de mejoramiento, se realiza a través de ensayos comparativos de rendimiento en diferentes ambientes. Las forrajeras anuales de invierno son casi insustituibles para mantener la cadena forrajera en la región pampeana subhúmeda seca y semiárida. En la actualidad tanto triticales como tricepiros son alternativas muy promisorias para su utilización como doble propósito, así como para explorar la posibilidad de producir harinas diferenciadas para uso en la industria de la alimentación humana. En el país, los triticales se han difundido para pastoreo y se requiere de nuevos cultivares. Los tricepiros se trabajan exclusivamente en la Argentina y es necesario desarrollar germoplasma. Se planea identificar germoplasma superior mediante selección en introducciones y cruzamientos propios, ensayos comparativos de pasto y grano, estudiar la estabilidad citológica mediante análisis cromosómicos y genómicos y caracterizar líneas avanzadas por descriptores morfológicos.The introduction of new genetic resources is essential in the agriculture evolution, especially when high quality production is the main objective. New germoplasm must be tested several years in order to be part of breeding programs or to be commercialized due to environmental differences among years. In dry subhumid and semiarid pampeana region, annual winter feed crops are necessary in order to have forage production during winter. Nowadays Triticales and Tricepiros are promising alternatives to be used as double purpose for animal feed and fodder, as well as to obtain differenced flour to human food. In Argentina, Triticale has spread for forage uses and new cultivars are required. Tricepiros are sown only in this country; therefore there is a need to develop Tricepiro germoplasm. The outline includes: identify superior germoplasm in introductions and own crosses through selection; establish comparative forage and grain trials; cytological estability study using chromosomal and genomic analysis and characterize advanced lines through morphological features.

Micro scale modeling grain boundary damage under creep conditions

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014

Effects of grain shape on packing and dilatancy of sheared granular materials

Aus: Soft matter, Vol. 10.2014, H. 28, S. 5157 - 5167

Doses and methods of distribution of potassium chloride on soybean crop (Glycine max (L.) Merrill) in a red latosol, affecting soil salinity, grain production and chemical composition of leaves

The present work deal t wi th an experiment under field conditions and a laboratory test of soil incubation the objectives were as follows: a. to study effects on soybean grain product ion and leaf composition of increasing doses of potassium chloride applied into the soil through two methods of distribution; b. to observe chemical modifications in the soils incubated with increasing doses of potassium chloride; and, c. to correlate field effects with chemical alterations observed in the incubation test, The field experiment was carried out in a Red Latosol (Haplustox) with soybean cultivar UFV - 1. Potassium chloride was distributed through two methods: banded (5 cm below and 5 cm aside of the seed line) and broadcasted and plowed-down. Doses used were: 0; 50; 100 and 200 kg/ha of K2O. Foliar samples were taken at flowering stage. Incubation test were made in plastic bags with 2 kg of air dried fine soil, taken from the arable layer of the field experiment, with the following doses of KC1 p,a. : 0; 50; 100; 200; 400; 800; 1,600; 3.200; 6,400 and 12,800 kg/ha of K(2)0. In the conditions observed during the present work, results allowed the following conclusions: A response by soybean grain production for doses of potassium chloride, applied in both ways, banded or broadcasted, was not observed. Leaf analysis did not show treatment influence over the leaf contents for N, P, K, Ca, Mg, and CI, Potassium chloride salinity effects in both methods of distribution for all the tested closes were not observed.

Comparative response to N, P and K of grain sorghum and corn: I. Distrophic quartz sand

The comparative response of three sorghum (E-57, TEY 101 and C- 102) and of three corn cultivars (HMD-7974, Centralmex and Piranão) to N, P and K applications was studied in a soil from Anhembi, SP, classifield as Distrophic quartz sand (AQd) was studied. Leaf analyses were made to assess the nutritional status of the two crops. Main conclusions were the following. 1. Sorghum yieldel more than corn; 2. Both sorghum and corn varieties showed different capacities to absorb N, P and K from the soil and to fertilizer application; 3. There was no response to K2O fertilization; 4. Only Piranão increased yield when suplemented with a mixture of micronutrientes; 5. Direct relationships between rates of N and P2O5 and yield and leaf content were found; 6. Direct relationships between rates of N and P2O5 and yield and leaf content were found; 7. The following leaf levels were considered to be adequate, respectively for sorghum and corn: N - 2,00 - 2,25%, 3,25 - 3,50%; P - 0,30 - 0,40, 0,45 - 0,50; K -2,00 - 2,50, 2,20 - 2,40%; Ca - 0,20 - 0,40, 0,44- 0,72% Mg - 0,25 - 0,40, 0,34 - 0,60%; S - 0,50 - 0,70, 0,72 -0,80; Cu - 7 - 10, 11 - 15%; Fe - 84 - 170, 98 - 125%; Mn - 58 - 72, 66 - 85%; Zn - 10 - 14, 18 - 22; critical levels, however, do very depending upon cultivar.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.