Tin coating requirements in fish cans

Prawn, crab and clam meat were processed in experimental ca s having reduced internal tin coating of 5.6 GSM. Conventional cans having 11.2 GSM tin coating were used as control. Results showed that experimental cans behaved normally when used for canning prawns, provided the lacquer film was perfect with no exposure of metal. When there was a discontinuity in lacquer film exposing the metal blackening took place in such areas. Areas subjected to severe strains like the lock seam side and expansion rings on can ends were found to be more prone to blackening. Experimental cans were found unsuitable for canning crab meat or clam meat because in both cases the can wall as well as the contents underwent discoloration, in all cases.

对三个流密码及其组件的随机性检测分析

对最近提出的用于GSM通信网络加密的流密码S1、S2、S3及其组件进行了全面深入的随机性检测分析。实际的随机性检测表明：只有s3能够满足所有被测项目的随机性要求，S1和工作在模式1下的S2则存在严重的随机性缺陷；此外，工作在模式2下的S2的随机性要优于工作在模式1下的S2的随机性。对这3个流密码的组件的随机性检测表明：LFSR-3的随机性最好，LFSR-1和LFSR-2都存在随机性缺陷。

Construction of 2-D directional filter bank by cascading checkerboard-shaped filter pair and CMFB

In this paper, we propose a new approach to construct a 2-dimensional (2-D) directional filter bank (DFB) by cascading a 2-D nonseparable checkerboard-shaped filter pair and 2-D separable cosine modulated filter bank (CMFB). Similar to diagonal subbands in 2-D separable wavelets, most of the subbands in 2-D separable CMFBs, tensor products of two 1-D CMFBs, are poor in directional selectivity due to the fact that the frequency supports of most of the subband filters are concentrated along two different directions. To improve the directional selectivity, we propose a new DFB to realize the subband decomposition. First, a checkerboard-shaped filter pair is used to decompose an input image into two images containing different directional information of the original image. Next, a 2-D separable CMFB is applied to each of the two images for directional decomposition. The new DFB is easy in design and has merits: low redundancy ratio and fine directional-frequency tiling. As its application, the BLS-GSM algorithm for image denoising is extended to use the new DFBs. Experimental results show that the proposed DFB achieves better denoising performance than the methods using other DFBs for images of abundant textures. (C) 2008 Elsevier B.V. All rights reserved.

The s-mote: a versatile heterogeneous multi-radio platform for wireless sensor networks applications

This paper presents a novel architecture and its implementation for a versatile, miniaturised mote which can communicate concurrently using a variety of combinations of ISM bands, has increased processing capability, and interoperability with mainstream GSM technology. All these features are integrated in a small form factor platform. The platform can have many configurations which could satisfy a variety of applications’ constraints. To the best of our knowledge, it is the first integrated platform of this type reported in the literature. The proposed platform opens the way for enhanced levels of Quality of Service (QoS), with respect to reliability, availability and latency, in addition to facilitating interoperability and power reduction compared to existing platforms. The small form factor also allows potential of integration with other mobile platforms including smart phones.

An integrated wideband multifunctional antenna using a microstrip patch with two U-slots

In this paper a multifunctional microstrip antenna is designed, fabricated and experimentally verified for operation in AWS, GSM, WiMAX and WLAN bands. This microstrip patch antenna has two U-shaped slots to achieve the dual wideband operation required to meet these specifications. The dimensions and locations of the U-slots are designed appropriately. The thick substrate used here helps in integrating the antenna with the existing aircraft panel material while achieving wide bandwidths. Experimental results of this single feed antenna indicate that it meets all current requirements for in-cabin wireless communication needs.

The destruction of 2-methylisoborneol and geosmin using titanium dioxide photocatalysis

Geosmin (GSM) and 2-methylisoborneol (MIB) are semi-volatile compounds produced by cyanobacteria in surface waters. These compounds present problems to the drinking water industry and in aquaculture because they can taint water and fish producing an earthy-musty flavour. This paper presents an initial study on the use of TiO₂ photocatalysis for the destruction of these compounds in water. The process proved effective with the complete destruction of MIB and GSM being achieved within 60 min. These results suggest that TiO₂ photocatalysis will be a successful method for removal of taint compounds from potable water supplies and fish farms. 

A continuous flow packed bed photocatalytic reactor for the destruction of 2-methylisoborneol and geosmin utilising pelletised TiO2

Taste and odour compounds, especially geosmin (GSM) and 2-methylisoborneol (2-MIB), cause major problems in both drinking water and aquaculture industries world-wide. Aquaculture in particular has experienced significant financial losses due to the accumulation of taint compounds prior to harvest resulting in consumer rejection. UV-TiO2 photocatalysis has been demonstrated to remove GSM and 2-MIB at laboratory scale but the development of a continuous flow reactor suitable for use in water treatment has not been investigated. In this study, a pilot packed bed photocatalytic reactor was developed and evaluated for water treatment with both laboratory and naturally tainted samples. A significant reduction of both 2-MIB and GSM was achieved in both trials using the packed bed reactor unit. With the laboratory spiked water (100ngL-1 of each compound added prior to treatment), detectable levels were reduced by up to 97% after a single pass through the unit. When the reactor was used to treat water in a fish farm where both compounds were being produced in situ (2-MIB: 19ngL-1 and GSM: 14ngL-1) a reduction of almost 90% in taint compounds was achieved. These very encouraging promising results demonstrate the potential of this UV-TiO2 photocatalytic reactor for water treatment in fish rearing systems and other applications.

Sistema remoto para monitorização de ambientes refrigerados em viaturas automóveis

Dissertação de mestrado, Engenharia Elétrica e Eletrónica (Tecnologias de Informação e Telecomunicações), Instituto Superior de Engenharia, Universidade do Algarve, 2015

Técnicas de eficiência energética em redes móveis usando o tráfego como referência

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Estudo de viabilidade de utilização de VLC em infra-estruturas ITS baseadas em semáforos rodoviários a LEDs

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

Design and evaluation of multi-band RF energy harvesting circuits and antennas for WSNs

Radio frequency (RF) energy harvesting is an emerging technology that will enable to drive the next generation of wireless sensor networks (WSNs) without the need of using batteries. In this paper, we present RF energy harvesting circuits specifically developed for GSM bands (900/1800) and a wearable dual-band antenna suitable for possible implementation within clothes for body worn applications. Besides, we address the development and experimental characterization of three different prototypes of a five-stage Dickson voltage multiplier (with match impedance circuit) responsible for harvesting the RF energy. Different printed circuit board (PCB) fabrication techniques to produce the prototypes result in different values of conversion efficiency. Therefore, we conclude that if the PCB fabrication is achieved by means of a rigorous control in the photo-positive method and chemical bath procedure applied to the PCB it allows for attaining better values for the conversion efficiency. All three prototypes (1, 2 and 3) can power supply the IRIS sensor node for RF received powers of -4 dBm, -6 dBm and -5 dBm, and conversion efficiencies of 20, 32 and 26%, respectively. © 2014 IEEE.

Algoritmos de estimação da direção de chegada de sinal

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Eletrónica e Telecomunicações

Sistema de monitorização de defeitos na rede de energia elétrica de média tensão

Nesta dissertação de Mestrado em Engenharia Eletrotécnica – Telecomunicações desenvolveu-se um sistema de monitorização de defeitos de uma rede de energia elétrica de média tensão, para melhorar a qualidade de serviço do fornecimento de energia elétrica. O sistema deteta e indica a localização da respetiva falha, que impede o funcionamento de uma parte da rede, também interliga todos os sensores instalados na rede a um ponto central que recebe toda a informação proveniente dos sensores, e ajuda na tomada de decisão. Neste trabalho de dissertação fez-se o estudo e descrição das redes de energia elétrica, realçando a topologia, o modo de operação e parâmetros de qualidade. Assinalou-se também os principais defeitos que podem ocorrer na rede de média tensão. Apresentou-se, ao nível comercial, soluções para mitigar o problema alvo de estudo. Explorou-se, num ambiente de simulação, soluções de deteção dos defeitos da rede, tendo sido desenvolvidos três sistemas distintos: sistema A, sistema B e sistema C. Sistema A que monitoriza o valor nominal da corrente elétrica em cada troço da rede elétrica, sistema B com a monitorização do valor da corrente elétrica em cada posto de transformação e sistema C que compara as correntes no inicio e final de cada troço da rede elétrica, verificando se há alguma discrepância entre ambas. Após a análise e simulação das soluções descreve-se o procedimento realizado para criar um protótipo de um sistema de monitorização. Começou-se por testar, individualmente, os sensores de corrente, circuito de condicionamento, microcontroladores e sistema Scada, usado para a visualização dos dados. Posteriormente, elaborou-se manuais de utilização de forma a auxiliar o sistema em trabalhos futuros que venham dar continuidade a este trabalho. Para validar a análise teórica e confirmar os resultados da simulação, testou-se experimentalmente o sistema de deteção C. Confirmou-se que o sistema de monitorização de defeitos é capaz de detetar e localizar a avaria presente na rede de energia elétrica.

Swordfish: an Autonomous Surface Vehicle for Network Centric Operations

The design and development of the swordfish autonomous surface vehicle (ASV) system is discussed. Swordfish is an ocean capable 4.5 m long catamaran designed for network centric operations (with ocean and air going vehicles and human operators). In the basic configuration, Swordfish is both a survey vehicle and a communications node with gateways for broadband, Wi-Fi and GSM transports and underwater acoustic modems. In another configuration, Swordfish mounts a docking station for the autonomous underwater vehicle Isurus from Porto University. Swordfish has an advanced control architecture for multi-vehicle operations with mixed initiative interactions (human operators are allowed to interact with the control loops).

The four- vs. alternative six-factor structure of the French WISC-IV: Comparison using confirmatory factor analyses

Exploratory and confirmatory factor analyses reported in the French technical manual of the WISC-IV provides evidence supporting a structure with four indices: Verbal Comprehension (VCI), Perceptual Reasoning (PRI), Working Memory (WMI), and Processing Speed (PSI). Although the WISC-IV is more attuned to contemporary theory, it is still not in total accordance with the dominant theory: the Cattell-Horn-Carroll (CHC) theory of cognitive ability. This study was designed to determine whether the French WISC-IV is better described with the four-factor solution or whether an alternative model based on the CHC theory is more appropriate. The intercorrelations matrix reported in the French technical manual was submitted to confirmatory factor analysis. A comparison of competing models suggests that a model based on the CHC theory fits the data better than the current WISC-IV structure. It appears that the French WISC-IV in fact measures six factors: crystallized intelligence (Gc), fluid intelligence (Gf), short-term memory (Gsm), processing speed (Gs), quantitative knowledge (Gq), and visual processing (Gv). We recommend that clinicians interpret the subtests of the French WISC-IV in relation to this CHC model in addition to the four indices.