UTILIZATION OF GIS AND SPATIAL ANALYSIS TECHNIQUES IN ARTISANAL AND SMALL SCALE MINING TO LOCATE A CENTRALIZED PROCESSING CENTRE

One of the global phenomena with threats to environmental health and safety is artisanal mining. There are ambiguities in the manner in which an ore-processing facility operates which hinders the mining capacity of these miners in Ghana. These problems are reviewed on the basis of current socio-economic, health and safety, environmental, and use of rudimentary technologies which limits fair-trade deals to miners. This research sought to use an established data-driven, geographic information (GIS)-based system employing the spatial analysis approach for locating a centralized processing facility within the Wassa Amenfi-Prestea Mining Area (WAPMA) in the Western region of Ghana. A spatial analysis technique that utilizes ModelBuilder within the ArcGIS geoprocessing environment through suitability modeling will systematically and simultaneously analyze a geographical dataset of selected criteria. The spatial overlay analysis methodology and the multi-criteria decision analysis approach were selected to identify the most preferred locations to site a processing facility. For an optimal site selection, seven major criteria including proximity to settlements, water resources, artisanal mining sites, roads, railways, tectonic zones, and slopes were considered to establish a suitable location for a processing facility. Site characterizations and environmental considerations, incorporating identified constraints such as proximity to large scale mines, forest reserves and state lands to site an appropriate position were selected. The analysis was limited to criteria that were selected and relevant to the area under investigation. Saaty’s analytical hierarchy process was utilized to derive relative importance weights of the criteria and then a weighted linear combination technique was applied to combine the factors for determination of the degree of potential site suitability. The final map output indicates estimated potential sites identified for the establishment of a facility centre. The results obtained provide intuitive areas suitable for consideration

¬FISH DISTRIBUTIONS IN LAKE ONTARIO’S EASTERN BASIN AND THE UPPER ST. LAWRENCE RIVER: AN ANALYSIS USING GIS AND OCCUPANCY MODELLING TECHNIQUES

Predictive models of species distributions are important tools for fisheries management. Unfortunately, these predictive models can be difficult to perform on large waterbodies where fish are difficult to detect and exhaustive sampling is not possible. In recent years the development of Geographic Information Systems (GIS) and new occupancy modelling techniques has improved our ability to predict distributions across landscapes as well as account for imperfect detection. I surveyed the nearshore fish community at 105 sites between Kingston, Ontario and Rockport, Ontario with the objective of modelling geographic and environmental characteristics associated with littoral fish distributions. Occupancy modelling was performed on Round Goby, Yellow perch, and Lepomis spp. Modelling with geographic and environmental covariates revealed the effect of shoreline exposure on nearshore habitat characteristics and the occupancy of Round Goby. Yellow Perch, and Lepomis spp. occupancy was most strongly associated negatively with distance to a wetland. These results are consistent with past research on large lake systems indicate the importance of wetlands and shoreline exposure in determining the fish community of the littoral zone. By examining 3 species with varying rates of occupancy and detection, this study was also able to demonstrate the variable utility of occupancy modelling.

A GIS framework for streamlining the Nature Refuge Gazettal process

Nature Refuges encompass the second largest extent of protected area estate in Queensland. Major problems exist in the data capture, map presentation, data quality and integrity of these boundaries. The spatial accuracies/inaccuracies of the Nature Refuge administrative boundaries directly influence the ability to preserve valuable ecosystems by challenging negative environmental impacts on these properties. This research work is about supporting the Nature Refuge Programs efforts to secure Queensland’s natural and cultural values on private land by utilising GIS and its advanced functionalities. The research design organizes and enters Queensland’s Nature Refuge boundaries into a spatial environment. Survey quality data collection techniques such as the Global Positioning Systems (GPS) are investigated to capture Nature Refuge boundary information. Using the concepts of map communication GIS Cartography is utilised for the protected area plan design. New spatial datasets are generated facilitating the effectiveness of investigative data analysis. The geodatabase model developed by this study adds rich GIS behaviour providing the capability to store, query, and manipulate geographic information. It provides the ability to leverage data relationships and enforces topological integrity creating savings in customization and productivity. The final phase of the research design incorporates the advanced functions of ArcGIS. These functions facilitate building spatial system models. The geodatabase and process models developed by this research can be easily modified and the data relating to mining can be replaced by other negative environmental impacts affecting the Nature Refuges. Results of the research are presented as graphs and maps providing visual evidence supporting the usefulness of GIS as means for capturing, visualising and enhancing spatial quality and integrity of Nature Refuge boundaries.

Urban growth monitoring techniques for sustainable development

This paper discusses the role of advance techniques for monitoring urban growth and change for sustainable development of urban environment. It also presents results of a case study involving satellite data for land use/land cover classification of Lucknow city using IRS-1C multi-spectral features. Two classification algorithms have been used in the study. Experiments were conducted to see the level of improvement in digital classification of urban environment using Artificial Neural Network (ANN) technique.

Application of Geographic Modeling Techniques to Quantify Spatial Access to Health Services Before and After an Acute Cardiac Event: The Cardiac ARIA Project

Background: Access to cardiac services is essential for appropriate implementation of evidence-based therapies to improve outcomes. The Cardiac Accessibility and Remoteness Index for Australia (Cardiac ARIA) aimed to derive an objective, geographic measure reflecting access to cardiac services. Methods: An expert panel defined an evidence-based clinical pathway. Using Geographic Information Systems (GIS), a numeric/alpha index was developed at two points along the continuum of care. The acute category (numeric) measured the time from the emergency call to arrival at an appropriate medical facility via road ambulance. The aftercare category (alpha) measured access to four basic services (family doctor, pharmacy, cardiac rehabilitation, and pathology services) when a patient returned to their community. Results: The numeric index ranged from 1 (access to principle referral center with cardiac catheterization service ≤ 1 hour) to 8 (no ambulance service, > 3 hours to medical facility, air transport required). The alphabetic index ranged from A (all 4 services available within 1 hour drive-time) to E (no services available within 1 hour). 13.9 million (71%) Australians resided within Cardiac ARIA 1A locations (hospital with cardiac catheterization laboratory and all aftercare within 1 hour). Those outside Cardiac 1A were over-represented by people aged over 65 years (32%) and Indigenous people (60%). Conclusion: The Cardiac ARIA index demonstrated substantial inequity in access to cardiac services in Australia. This methodology can be used to inform cardiology health service planning and the methodology could be applied to other common disease states within other regions of the world.

Digital image databases support GIS operations

Evaluates trends in the imagery built into GIS applications to supplement existing vector data of streets, boundaries, infrastructure and utilities. These include large area digital orthophotos, Landsat and SPOT data. Future developments include 3 to 5 metre pixel resolutions from satellites, 1 to 2 metres from aircraft. GPS and improved image analysis techniques will also assist in improving resolution and accuracy.

Mapping Road Infrastructure in Developing Countries Applying Remote Sensing and GIS - The Case of the Taita Hills, Kenya

Road transport and infrastructure has a fundamental meaning for the developing world. Poor quality and inadequate coverage of roads, lack of maintenance operations and outdated road maps continue to hinder economic and social development in the developing countries. This thesis focuses on studying the present state of road infrastructure and its mapping in the Taita Hills, south-east Kenya. The study is included as a part of the TAITA-project by the Department of Geography, University of Helsinki. The road infrastructure of the study area is studied by remote sensing and GIS based methodology. As the principal dataset, true colour airborne digital camera data from 2004, was used to generate an aerial image mosaic of the study area. Auxiliary data includes SPOT satellite imagery from 2003, field spectrometry data of road surfaces and relevant literature. Road infrastructure characteristics are interpreted from three test sites using pixel-based supervised classification, object-oriented supervised classifications and visual interpretation. Road infrastructure of the test sites is interpreted visually from a SPOT image. Road centrelines are then extracted from the object-oriented classification results with an automatic vectorisation process. The road infrastructure of the entire image mosaic is mapped by applying the most appropriate assessed data and techniques. The spectral characteristics and reflectance of various road surfaces are considered with the acquired field spectra and relevant literature. The results are compared with the experimented road mapping methods. This study concludes that classification and extraction of roads remains a difficult task, and that the accuracy of the results is inadequate regardless of the high spatial resolution of the image mosaic used in this thesis. Visual interpretation, out of all the experimented methods in this thesis is the most straightforward, accurate and valid technique for road mapping. Certain road surfaces have similar spectral characteristics and reflectance values with other land cover and land use. This has a great influence for digital analysis techniques in particular. Road mapping is made even more complicated by rich vegetation and tree canopy, clouds, shadows, low contrast between roads and surroundings and the width of narrow roads in relation to the spatial resolution of the imagery used. The results of this thesis may be applied to road infrastructure mapping in developing countries on a more general context, although with certain limits. In particular, unclassified rural roads require updated road mapping schemas to intensify road transport possibilities and to assist in the development of the developing world.

A GIS-based model of soil erosion and transport

Soil erosion is a natural process that occurs when the force of wind, raindrops or running water on the soil surface exceeds the cohesive forces that bind the soil together. In general, vegetation cover protects the soil from the effects of these erosive forces. However, land management activities such as ploughing, burning or heavy grazing may disturb this protective layer, exposing the underlying soil. The decision making process in rural catchment management is often supported by the predictive modelling of soil erosion and sediment transport processes within the catchment, using established techniques such as the Universal Soil Loss Equation [USLE] and the Agricultural Nonpoint Source pollution model [AGNPS]. In this article, the authors examine the range of erosion models currently available and describe the application of one of these to the Burrishoole catchment on the north-west coast of Ireland, which has suffered heavy erosion of blanket peat in recent years.

GIS-based Association Between PM10 and Allergic Diseases in Seoul: Implications for Health and Environmental Policy.

PURPOSE: The role of PM10 in the development of allergic diseases remains controversial among epidemiological studies, partly due to the inability to control for spatial variations in large-scale risk factors. This study aims to investigate spatial correspondence between the level of PM10 and allergic diseases at the sub-district level in Seoul, Korea, in order to evaluate whether the impact of PM10 is observable and spatially varies across the subdistricts. METHODS: PM10 measurements at 25 monitoring stations in the city were interpolated to 424 sub-districts where annual inpatient and outpatient count data for 3 types of allergic diseases (atopic dermatitis, asthma, and allergic rhinitis) were collected. We estimated multiple ordinary least square regression models to examine the association of the PM10 level with each of the allergic diseases, controlling for various sub-district level covariates. Geographically weighted regression (GWR) models were conducted to evaluate how the impact of PM10 varies across the sub-districts. RESULTS: PM10 was found to be a significant predictor of atopic dermatitis patient count (P<0.01), with greater association when spatially interpolated at the sub-district level. No significant effect of PM10 was observed on allergic rhinitis and asthma when socioeconomic factors were controlled for. GWR models revealed spatial variation of PM10 effects on atopic dermatitis across the sub-districts in Seoul. The relationship of PM10 levels to atopic dermatitis patient counts is found to be significant only in the Gangbuk region (P<0.01), along with other covariates including average land value, poverty rate, level of education and apartment rate (P<0.01). CONCLUSIONS: Our findings imply that PM10 effects on allergic diseases might not be consistent throughout Seoul. GIS-based spatial modeling techniques could play a role in evaluating spatial variation of air pollution impacts on allergic diseases at the sub-district level, which could provide valuable guidelines for environmental and public health policymakers.

Mapping worlds? Excavating cartographic encounters in Plantation Ireland through GIS

This paper uses the analytical potential of Geographical Information Systems (GIS) to explore processes of map production and circulation in early-seventeenth century Ireland. The paper focuses on a group of historic maps, attributed to Josias Bodley, which were commissioned in 1609 by the English Crown to assist in the Plantation of Ulster. Through GIS and digitizing map-features, and in particular by quantifying map-distortion, it is possible to examine how these maps were made, and by whom. Statistical analyses of spatial data derived from the GIS are shown to provide a methodological basis for ‘excavating’ historical geographies of Plantation map-making. These techniques, when combined with contemporary written sources, reveal further insight on the ‘cartographic encounters’ taking place between surveyors and map-makers working in Ireland in the early 1600s, opening up the ‘mapping worlds’ which linked Ireland and Britain through the networks and embodied practices of Bodley and his map-makers.

Using GPS, GIS & remote sensing to understand Niagara Terroir : Pinot noir in the Four Mile Creek & St. David's Bench sub-appellations

The relationships between vine water status, soil texture, and vine size were observed in four Niagara, Ontario Pinot noir vineyards in 2008 and 2009. The vineyards were divided into water status zones using geographic information systems (GIS) software to map the seasonal mean midday leaf water potential (,P), and dormant pruning shoot weights following the 2008 season. Fruit was harvested from all sentinel vines, bulked by water status zones and made into wine. Sensory analysis included a multidimensional sorting (MDS) task and descriptive analysis (DA) of the 2008 wines. Airborne multispectral images, with a spatial resolution of 38 cm, were captured four times in 2008 and three times in 2009, with the final flights around veraison. A semi-automatic process was developed to extract NDVI from the images, and a masking procedure was identified to create a vine-only NDVI image. 2008 and 2009 were cooler and wetter than mean years, and the range of water status zones was narrow. Yield per vine, vine size, anthocyanins and phenols were the least consistent variables. Divided by water status or vine size, there were no variables with differences between zones in all four vineyards in either year. Wines were not different between water status zones in any chemical analysis, and HPLC revealed that there were no differences in individual anthocyanins or phenolic compounds between water status zones within the vineyard sites. There were some notable correlations between vineyard and grape composition variables, and spatial trends were observed to be qualitatively related for many of the variables. The MDS task revealed that wines from each vineyard were more affected by random fermentation effects than water status effects. This was confirmed by the DA; there were no differences between wines from the water status zones within vineyard sites for any attribute. Remotely sensed NDVI (normalized difference vegetation index) correlated reasonably well with a number of grape composition variables, as well as soil type. Resampling to a lower spatial resolution did not appreciably affect the strength of correlations, and corresponded to the information contained in the masked images, while maintaining the range of values of NDVI. This study showed that in cool climates, there is the potential for using precision viticulture techniques to understand the variability in vineyards, but the variable weather presents a challenge for understanding the driving forces of that variability.

Ecological studies of the Parambikulam Tiger Reserve in the Western Ghats of India, using Remote Sensing and GIS

mbikulam Tiger Reserve of Western Ghats using Geospatial technology. The major objectives of the study are Land use land cover mapping (LULC) and Phytodiversity analysis. Satellite data was used to map the land use / land cover using supervised classification techniques in Erdas imagine. The change for a period of 32 years was assessed using the multi-temporal satellite datasets from Landsat MSS (1973), Landsat TM (1990), and IRS P6 LISS III (2005). A geospatial approach was used for the land cover analysis. Digital elevation models, Satellite imageries and SOI topo sheets were the data sets used in the analysis. Vegetation sampling plots distributed over the different forest types were enumerated and studied for Phytodiversity analysis.

Spatial prediction of rufous bristlebird habitat in a coastal heathland: a GIS-based approach

1. To develop a conservation management plan for a species, knowledge of its distribution and spatial arrangement of preferred habitat is essential. This is a difficult task, especially when the species of concern is in low   abundance. In south-western Victoria, Australia, populations of the rare rufous bristlebird Dasyornis broadbenti are threatened by fragmentation of suitable habitat. In order to improve the conservation status of this species, critical habitat requirements must be identified and a system of corridors must be established to link known populations. A predictive spatial model of rufous bristlebird habitat was developed in order to identify critical areas requiring preservation, such as corridors for dispersal.
2. Habitat models generated using generalized linear modelling techniques can assist in delineating the specific habitat requirements of a species. Coupled with geographic information system (GIS) technology, these models can be extrapolated to produce maps displaying the spatial configuration of suitable habitat.
3. Models were generated using logistic regression, with bristlebird presence or absence as the dependent variable and landscape variables, extracted from both GIS data layers and multispectral digital imagery, as the predictors. A multimodel inference approach based on Akaike’s information criterion was used and the resulting model was applied in a GIS to extrapolate predicted likelihood of occurrence across the entire area of concern. The predictive performance of the selected model was evaluated using the receiver operating characteristic (ROC) technique. A hierarchical partitioning protocol was used to identify the predictor variables most likely to influence variation in the dependent variable. Probability of species presence was used as an index of habitat suitability.
4. Negative associations between rufous bristlebird presence and  increasing elevation, 'distance to cree', 'distance to coast' and sun index were evident, suggesting a preference for areas relatively low in altitude, in close proximity to the coastal fringe and drainage lines, and receiving less direct sunlight. A positive association with increasing habitat complexity also suggested that this species prefers areas containing high vertical density of vegetation.
5. The predictive performance of the selected model was shown to be high (area under the curve 0·97), indicating a good fit of the model to the data. Hierarchical partitioning analysis showed that all the variables considered had significant  independent contributions towards explaining the variation in the dependent variable. The proportion of the total study area that was predicted as suitable habitat for the rufous bristlebird (using probability of occurrence at a ≥0·5 level ) was 16%.
6. Synthesis and applications. The spatial model clearly delineated areas predicted as highly suitable rufous bristlebird habitat, with evidence of potential corridors linking coastal and inland populations via gullies. Conservation of this species will depend on management actions that protect the critical habitats identified in the model. A multi-scale  approach to the modelling process is recommended whereby a spatially explicit model is first generated using landscape variables extracted from a GIS, and a second model at site level is developed using fine-scale habitat variables measured on the ground. Where there are constraints on the time and cost involved in measuring finer scale variables, the first step alone can be used for conservation planning.

Estimates of Heterozostera tasmanica, Zostera muelleri and Ruppia megacarpa distribution and biomass in the Hopkins Estuary, western Victoria, by GIS

Knowledge of the spatial arrangement of the seagrass distribution and biomass within the Hopkins Estuary is an essential step towards gaining an understanding of the functioning of the estuarine ecosystem. This study marks the first attempt to map seagrass distribution and model seagrass biomass and epiphyte biomass along depth gradients by the use of global positioning system (GPS) and geographical information system (GIS) technologies in the estuary. For mapping seagrass in small estuaries, ground-surveying the entire system is feasible. Three species of seagrasses, Heterozostera tasmanica (Martens ex Aschers), Zostera muelleri (Irmisch ex Aschers) and Ruppia megacarpa (Mason), were identified in the Hopkins Estuary. All beds investigated contained a mixed species relationship. Three harvest techniques were trialed in a pilot study, with the 25 × 25-cm quadrat statistically most appropriate. Biomass of seagrasses and epiphytes was found to vary significantly with depth, but not between sites. The average estimate of biomass for total seagrasses and their epiphytes in the estuary in January 2000 was 222.7 g m^–2 (dry weight). Of the total biomass, 50.6% or 112.7 g m^–2 (dry weight) was contributed by seagrasses and 49.4% of the biomass (110.0 g m^–2) were epiphytes. Of the 50.6% of the total biomass represented by seagrasses, 39.3% (87.5 g m^–2) were leaves and 11.3% (25.2 g m^–2) were rhizomes. The total area of seagrasses present in the Hopkins Estuary was estimated to be 0.4 ± 0.005 km², with the total area of the estuary estimated to be 1.6 ± 0.02 km² (25% cover). The total standing crop of seagrasses and epiphytes in the Hopkins Estuary in January 2000 was estimated to be 102.3 ± 57 t in dry weight, 56% (56.9 ± 17 t, dry weight) seagrasses and 44% (45.4 ± 19 t, dry weight) epiphytes. Of the seagrass biomass, 39% (39.7 ± 13 t, dry weight) was contributed by leaves and 17% (17.3 ± 7 t, dry weight) by rhizomes.

Using community-based monitoring with GIS to create habitat maps for a marine protected area in Australia

In recent years there has been an increase in community-based monitoring programmes developed and implemented worldwide. This paper describes how the data collected from such a programme could be integrated into a Geographic Information System (GIS) to create temperate subtidal marine habitat maps. A differential Global Positioning System was utilized to accurately record the location of the trained community-based SCUBA diver data. These georeferenced data sets were then used to classify benthic habitats using an aerial photograph and digitizing techniques. This study demonstrated that trained community-based volunteers can collect data that can be utilized within a GIS to create reliable and cost-effective maps of shallow temperate subtidal rocky reef systems.