Analysis of a cascade‐pumped 16 μm CO2‐N2 downstream‐mixing gasdynamic laser

The generation of a 16 μm laser beam through cascading in a downstream‐mixing CO2 gasdynamic laser is studied. To simulate actual lasing action, a generalized, two‐dimensional, flow‐radiation‐coupled power extraction model for a gasdynamic laser is used. Also, to model the cascade process a new four‐mode CO2‐N2 vibrational kinetic model has been proposed. The steady‐state intensity obtained for an exclusive 9.4 μm transition is of the order of 5×107 W/m2. In the cascade mode of operation the steady‐state intensities for 9.4 and 16 μm transitions of the order of 5×107 W/m2 and 1.0×106 W/m2, respectively, have been obtained.

Role of water contamination within the GC column of a GasBench II peripheral on the reproducibility of O-18/O-16 ratios in water samples

The GasBench II peripheral along with MAT 253 combination provides a more sensitive platform for the determination of water isotope ratios. Here, we examined the role of adsorbed moisture within the gas chromatography (GC) column of the GasBench II on measurement uncertainties. The uncertainty in O-18/O-16 ratio measurements is determined by several factors, including the presence of water in the GC. The contamination of GC with water originating from samples as water vapour over a longer timeframe is a critical factor in determining the reproducibility of O-18/O-16 ratios in water samples. The shift in isotope ratios observed in the experiment under dry and wet conditions correlates strongly with the retention time of analyte CO2, indicating the effect of accumulated moisture. Two possible methods to circumvent or minimise the effect of adsorbed water on isotope ratios are presented here. The proposed methodology includes either the regular baking of the GC column at a higher temperature (120 degrees C) after analysis of a batch of 32 sample entries or conducting the experiment at a low GC column temperature (22.5 degrees C). The effects of water contamination on long-term reproducibility of reference water, with and without baking protocol, have been described.

IN-VITRO CYTOTOXICITY AND CELL CYCLE ANALYSIS OF TWO NOVEL BIS-1, 2, 4-TRIAZOLE DERIVATIVES: 1,4-BIS[5-(5-MERCAPTO-1,3,4-OXADIAZOL-2-yl-METHYL)-THIO-4-(p-TOLYL)-1, 2,4-TRIAZOL-3-yl]-BUTANE (MNP-14) AND 1,4-BIS[5-(CARBETHOXY-METHYL)-THIO-4-(p-ETHOXY PHENYL)-1,2,4-TRIAZOL-3-yl]-BUTANE (MNP-16)

In the present study, we have tested the cytotoxic and DNA damage activity of two novel bis-1,2,4 triazole derivatives, namely 1,4-bis[5-(5-mercapto-1,3,4-oxadiazol-2-yl-methyl)-thio4-(p-tolyl)-1,2 ,4-triazol-3-yl]-butane (MNP-14) and 1,4-bis[5-(carbethoxy-methyl)-thio-4-(p-ethoxy phenyl) -1,2,4-triazol-3-yl]-butane (MNP-16). The effect of these molecules on cellular apoptosis was also determined. The in-vitro cytotoxicity was evaluated by a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay as well as Trypan blue dye exclusion methods against human acute lymphoblastic leukemia (MOLT4) and lung cancer cells (A549). Our results showed that MNP-16 induced significant cytotoxicity (IC50 of 3-5 mu M) compared with MNP-14. The cytotoxicity induced by MNP-16 was time and concentration dependent. The cell cycle analysis by flow cytometry (fluorescence-activated cell sorting [FACS]) revealed that though there was a significant increase in the apoptotic population (sub-G1 phase) with an increased concentration of MNP-14 and 16, there was no cell cycle arrest. Further, the comet assay results indicated considerable DNA

Surface electrode switching of a 16-electrode wireless EIT system using RF-based digital data transmission scheme with 8 channel encoder/decoder ICs

A Radio Frequency (RF) based digital data transmission scheme with 8 channel encoder/decoder ICs is proposed for surface electrode switching of a 16-electrode wireless Electrical Impedance Tomography (EIT) system. A RF based wireless digital data transmission module (WDDTM) is developed and the electrode switching of a EIT system is studied by analyzing the boundary data collected and the resistivity images of practical phantoms. An analog multiplexers based electrode switching module (ESM) is developed with analog multiplexers and switched with parallel digital data transmitted by a wireless transmitter/receiver (T-x/R-x) module working with radio frequency technology. Parallel digital bits are generated using NI USB 6251 card working in LabVIEW platform and sent to transmission module to transmit the digital data to the receiver end. The transmitter/receiver module developed is properly interfaced with the personal computer (PC) and practical phantoms through the ESM and USB based DAQ system respectively. It is observed that the digital bits required for multiplexer operation are sequentially generated by the digital output (D/O) ports of the DAQ card. Parallel to serial and serial to parallel conversion of digital data are suitably done by encoder and decoder ICs. Wireless digital data transmission module successfully transmitted and received the parallel data required for switching the current and voltage electrodes wirelessly. 1 mA, 50 kHz sinusoidal constant current is injected at the phantom boundary using common ground current injection protocol and the boundary potentials developed at the voltage electrodes are measured. Resistivity images of the practical phantoms are reconstructed from boundary data using EIDORS. Boundary data and the resistivity images reconstructed from the surface potentials are studied to assess the wireless digital data transmission system. Boundary data profiles of the practical phantom with different configurations show that the multiplexers are operating in the required sequence for common ground current injection protocol. The voltage peaks obtained at the proper positions in the boundary data profiles proved the sequential operation of multiplexers and successful wireless transmission of digital bits. Reconstructed images and their image parameters proved that the boundary data are successfully acquired by the DAQ system which in turn again indicates a sequential and proper operation of multiplexers as well as the successful wireless transmission of digital bits. Hence the developed RF based wireless digital data transmission module (WDDTM) is found suitable for transmitting digital bits required for electrode switching in wireless EIT data acquisition system. (C) 2011 Elsevier Ltd. All rights reserved.

Does aluminium bind to histidine? an NMR investigation of Amyloid beta 12 and Amyloid beta 16 fragments

Aluminium and zinc are known to be the major triggering agents for aggregation of amyloid peptides leading to plaque formation in Alzheimer's disease. While zinc binding to histidine in A (amyloid ) fragments has been implicated as responsible for aggregation, not much information is available on the interaction of aluminium with histidine. In the NMR study of the N-terminal A fragments, DAEFRHDSGYEV (A12) and DAEFRHDSGYEVHHQK (A16) presented here, the interactions of the fragments with aluminium have been investigated. Significant chemical shifts were observed for few residues near the C-terminus when aluminium chloride was titrated with A12 and A16 peptides. Surprisingly, it is nonhistidine residues which seem to be involved in aluminium binding. Based on NMR constrained structure obtained by molecular modelling, aluminium-binding pockets in A12 were around charged residues such as Asp, Glu. The results are discussed in terms of native structure propagation, and the relevance of histidine residues in the sequences for metal-binding interactions. We expect that the study of such short amyloid peptide fragments will not only provide clues for plaque formation in aggregated conditions but also facilitate design of potential drugs for these targets.

A 16-Gene Signature Distinguishes Anaplastic Astrocytoma from Glioblastoma

Anaplastic astrocytoma (AA; Grade III) and glioblastoma (GBM; Grade IV) are diffusely infiltrating tumors and are called malignant astrocytomas. The treatment regimen and prognosis are distinctly different between anaplastic astrocytoma and glioblastoma patients. Although histopathology based current grading system is well accepted and largely reproducible, intratumoral histologic variations often lead to difficulties in classification of malignant astrocytoma samples. In order to obtain a more robust molecular classifier, we analysed RT-qPCR expression data of 175 differentially regulated genes across astrocytoma using Prediction Analysis of Microarrays (PAM) and found the most discriminatory 16-gene expression signature for the classification of anaplastic astrocytoma and glioblastoma. The 16-gene signature obtained in the training set was validated in the test set with diagnostic accuracy of 89%. Additionally, validation of the 16-gene signature in multiple independent cohorts revealed that the signature predicted anaplastic astrocytoma and glioblastoma samples with accuracy rates of 99%, 88%, and 92% in TCGA, GSE1993 and GSE4422 datasets, respectively. The protein-protein interaction network and pathway analysis suggested that the 16-genes of the signature identified epithelial-mesenchymal transition (EMT) pathway as the most differentially regulated pathway in glioblastoma compared to anaplastic astrocytoma. In addition to identifying 16 gene classification signature, we also demonstrated that genes involved in epithelial-mesenchymal transition may play an important role in distinguishing glioblastoma from anaplastic astrocytoma.

Estudio de la conservación in vitro a tasas minimas de crecimiento en piña (Ananas comosus L.) mediante el efecto de osmoreguladores y la dilucion de las sales Murashige y Skoog (1962) a temperaturas de 24ºC y 16 ºC

En el presente estudio se necesitó establecer explantes de piña (Ananas comosus L.) del cultivar Cayena lisa, de los cuales se utilizaron yemas apicales y axilares seleccionadas por su buen estado fisiológico y morfológico. Estas se establecieron en condiciones in vitro utilizando el medio de cultivo básico Murashige & Skoog MS (1962), suplementado con 2 mg/1 de 6-Bencil aminopurina (6-BAP) y 0.02 mg/1 de ácido naftalen acético (ANA) en condiciones controladas de temperatura, humedad relativa e intensidad lumínica. Una vez que se logró micropropagar la cantidad de explantes necesarios para la conservación, se procedió a la aplicación de los inhibidores del crecimiento (manito!y sorbitol) en concentraciones de 10, 20 y 30 g/1 y de la dilución de las sales MS al 25, 50 y 75%, interactuando con temperaturas de 24 oc y 16 oc. A los 120 días de haber permanecido las yemas axilares en las diferentes variantes de medios de cultivo sujetas a estudio, se observó mayor deterioro fisiológico y morfológico de las plántulas en los tratamientos con 1O, 20 y 30 g/1 demanitol y sorbitol. En las variables altura, número de hojas y color de las hojas se experimentaron menores incrementos mensuales, sin embargo se registraron mayores daños, especialmente en las hojas, las cuales presentaron un mayor porcentaje con color verde clorótico a temperaturas de 24ºc de 16 °C. La sobrevivencia fue mayor a temperatura de 16ºc, por el contrario en las diluciones de las sales MS el deterioro fisiológico y morfológico de lasplántulas fue menor, observándose mayor sobrevivencia, presentando mayores porcentajes de coloración verde oscuro y un pequeño porcentaje de plántulas atípicas a temperaturas de 24 °C y 16 °C. También fue notoria la presencia deplántulas atípicas en el manito! y sorbitol a temperatura de 24 °C. Únicamente en el tratamiento a 30 g/1 de sorbitol se observó el fenómeno de vitrificación a temperatura de 24ºc en un 15%. Las diluciones de las sales indujeron mejores resultados en altura, número de hojas y color de las hojas en ambas temperaturas, sus características fenotípicas y genotípicas se mantuvieron iguales a pesar de la reducción del crecimiento

Sapientia, 1950, Vol. V, nº 16 (número completo)

Contenido: El hombre desamparado / La Dirección – Los fundamentos de la educación en Santo Tomás de Aquino / José Todoli Duque -- La filosofía jurídica de Hans Kelsen/ Julio M. Ojea Quintana – El problema moral / Carlo Giacon – Notas y comentarios -- Bibliografía

Uso eficiente del nitrógeno por 16 líneas de sorgo en Nicaragua

El nitrógeno es uno de los factores que limita la producción del sorgo por su alta demanda y alto costo del fertilizante. Con el objetivo de evaluar distintos materiales de sorgo en Nicaragua, un experimento con 14 líneas de sorgo de ICRISAT, Jocoro de El Salvador y el testigo local Pinolero-1, se plantaron a cero y 37 kg N/ha en seis ambientes. Los ambientes eran combinaciones de localidad/año incluidos; El Plantel 2003 y 2004, CEO-Posoltega 2003 y 2004, y Tisma y San Isidro en 2004. Se utilizo un diseño de bloques completos al azar, los tratamientos se aleatorizaron en las parcelas. La línea se ubico en la parcela grande y el nivel de nitrógeno en las subparcelas. El rendi- miento de grano, rastrojo, concentración de N y extracción por grano y rastrojo, y el uso eficiente del N por grano y biomasa fueron deter- minados. Sin aplicación de N, ninguna línea de sorgo rindió mejor que Pinolero-1, mientras ICSVLM-93079 produjo 0.7 tm/ha más en grano con aplicación de N. Pinolero-1 obtuvo el uso eficiente de N más alto con 46 kg grano y 121 kg biomasa por unidad de N aplicado. ICSVLM-93079 presento la respuesta más alta en rendimiento con 35 kg N/ha. La aplicación de N aumentó el rendimiento de grano en 0.8 tm/ha y de rastrojo en 1.9 tm/ha. Los programas de mejoramiento de sorgo en Nicaragua, deben incluir ICSVLM-93079 para aumentar rendimiento de grano. Los productores deben usar el fertilizante N para aumentar rendimientos de grano y de rastrojo.

Caracterización de 16 genotipos de leguminosas herbáceas asociado con maíz en Niquinohomo y Managua

Este ensayo experimental documenta el comportamiento agronómico general de leguminosas herbáceas asociadas con maíz, bajo manejo en dos ambientes ecológicos diferentes de Nicaragua: Finca Santa Rosa, Sabana Grande, Managua y el Rancho Agropecológico en Especies Menores Ebenezer, RAEME, Niquinohomo, Masaya, para tal fin se emplearon como tratamientos 7 especies y 16 variedades de leguminosas herbáceas asociadas con maíz ( Zea mays) , variedad NB6, más maíz establecido en monocultivo, a los cuales se les analizó mediante las variables germinación, altura de la planta, diámetro del tallo, cobertura, presencia de daño foliar por insectos, presencia de malezas, porcentaje de materia seca, kg de materia seca por hectárea, número de nódulos, peso de raíz y porcentaje de Nitrógeno en biomasa de las leguminosas. El diseño del ensayo experimental constó de tres bloques al azar, dispuestos en forma perpendicular entre sí, cada bloque fue dividido en 17 parcelas. Al analizar los resultados se encontró que en la Finca Santa Rosa Vigna unguiculata verde brasil (vun1) y en RAEME, Vigna unguiculata 284/2 (Vun3) fueron la s leguminosas que presentaron mejor comportamiento, en relación al maíz, en la Finca Santa Rosa presentó mejor comportamiento al estar asociado con Vigna unguiculata 131-2 (Vun5), en RAEME, fue el maíz asociado con Centrosema plumieri (Cp). Así mismo los resultados indican que al asociar el maíz con leguminosas se obtienen mejores resultados que estando solo. Para ambos sitios se determinó que el mejor asocio fue maíz - Vigna unguiculata verde brasil (vun1), ya que proporciona para ambas especies calificaciones similares, demostrando un equilibrio entre los dos cultivos