Liquid phase benzoylation of arenes over iron promoted sulphated zirconia

The present work undertakes the preparation and physico-chemical characterisation of iron promoted sulphated zirconia (SZ) with different amounts of iron loading and their application to Friedel-Crafts benzoylation of benzene, toluene and xylene under different experimental conditions, XRD and laser Raman techniques reveal the stabilisation of the tetragonal phase of zirconia and the existence of iron in highly dispersed form as Fe203 on the catalyst surface. The surface acidic properties were determined by ammonia temperature programmed desorption (TPD) and perylene adsorption, The results were supported by the TGA studies after adsorption of pyridine and 2,6-dimethylpyridine (2,6-DMP), Strong Lewis acid sites on the surface, which are evident from TPD and perylene adsorption studies. explain the high catalytic activity of the systems towards benzoylation. The experimental results provide evidence for the truly heterogeneous nature of the reaction. The studies also establish the resistance to deactivation in the metal incorporated sulphated systems.

Surface properties and catalytic activity of ferrospinels of nickel, cobalt and copper, prepared by soft chemical methods

Ferrospinels of nickel, cobalt and copper and their sulphated analogues were prepared by the room temperature coprecipitation route to yield samples with high surface areas. The intrinsic acidity among the ferrites was found to decrease in the order: cobalt> nickel> copper. Sulphation caused an increase in the number of weak and medium strong acid sites, whereas the strong acid sites were left unaffected. Electron donor studies revealed that copper ferrite has both the highest proportion of strong sites and the lowest proportion of weak basic sites. All the ferrite samples proved to be good catalysts for the benzoy lation of toluene with benzoyl chloride. copper and cobalt ferrites being much more active than nickel ferrite. The catalytic activity for benzoylation was not much influenced by sulphation, but it increased remarkably with calcination temperature of the catalyst. Surface Lewis acid sites, provided by the octahedral cations on the spinel surface, are suggested to be responsible for the catalytic activity for the benzoylation reaction.

Studies on Polymer Bound Antioxidants

The primary aim of this work has been to prepare efficient and cost effective polymer bound antioxidants by direct’ attachment of conventional antioxidants to a modified polymer. Due to the importance and easy availability of natural rubber in Kerala, it is proposed to make use of low molecular weight natural rubber as the polymer substrate for binding the antioxidant in most cases. The molecular weight of such low molecular weight natural rubber can be easily manipulated by varying the time of mastication, UV—irradiation etc. Further, the bound antioxidant may also get vulcanized during the vulcanization of the elastomer to which it is added, making the antioxidant non—volatile and non extractable. Several methods are proposed to be investigated for attaching the antioxidant to the low molecular weight natural rubber such as modified Friedel-Craft's alkylation reaction, binding during UV—irradiation, binding during aggressive mastication etc. The efficiency of such rubber bound antioxidants is proposed to be compared with that of conventional antioxidants in terms of volatility, extractability in solvents, ageing resistance etc. Naturally occuring antioxidants such as cardanol, are also proposed to be modified by binding them to low molecular weight natural rubber. The study is undertaken with the intention of generating a class of bound antioxidants which can be used in elastomers for aggressive and long term application.

‘‘catalysis by nano sulfated titania modified by transition metals"

in the present study, we have prepared and evaluated the physical and chemical properties and catalytic activities of transition metal loaded sulfated titania via the sol-gel route. Sol-gel method is widely used for preparing porous materials having controlled properties and leads to the formation of oxide particles in nano range, which are spherical or interconnected to each other. Characterization using various physico-chemical techniques and a detailed study of acidic properties are also carried out. Some reactions of industrial importance such as Friedel-Crafts reaction, fen-butylation of phenol,Beckmann rearrangement of cyclohexanone oxime, nitration of phenol and photochemical degradation of methylene blue have been selected for catalytic activity study in the present venture. The work is organized into eight chapters

One-pot synthesis and characterization of soluble poly(aryl ether-ketone)s having pendant carboxyl groups

Aromatic poly(ether-ketone)s having pendant carboxyl groups have been obtained by direct, one-pot, Friedel-Crafts copolycondensation of 4,4'-diphenoxybenzophenone with a mixture of terephthaloyl chloride (TC) and trimellitic anhydride acid chloride (TAAC), over a wide range of TAAC/TC molar ratios, in the presence of anhydrous aluminum chloride. The syntheses were performed as precipitation-polycondensations, and the polymers were obtained in particulate form. Besides globular particles of polymer, small quantities of elongated, needlelike particles were observed when the mole ratio TAAC/TC was less than 1. Use of X-ray microdiffraction with synchrotron radiation has revealed that the needlelike material consists of a cyclic compound containing 10 phenylene units, i.e., the crystals are of a [2 + 2] macrocyclic dimer. The polymers obtained are soluble in strong acids and in mixtures of methanesulfonic acid or trifluoroacetic acid with chlorinated hydrocarbons. The molecular structures of the polymers were confirmed by H-1 and C-13 NMR spectroscopy. Reaction of TAAC with 4,4'-diphenoxybenzophenone produced mainly meta-orientation of the resulting ketone linkages. The size of the polymer particles, their molecular weights, and the melting behavior of the products obtained depend on the TAAC/TC ratio used. Ortho-keto acid residues, formed during reaction of anhydride groups of TAAC with 4,4'-diphenoxybenzophenone, exhibit ring-chain tautomerism. A carboxyl-containing aromatic polyketone derived from p-terphenyl, and thus having with no ether linkages in the main chain, was prepared by analogous chemistry, and functional derivatives of carboxy-substituted polyketones were also obtained and characterized.

Synthese von optisch aktivem 9,14-Methylen-Lipoxin A 4

In der vorliegenden Arbeit wurde die Synthese von optisch aktivem 9,14-Methylen-Lipoxin A4 untersucht. Lipoxin A4 und seine Derivate leiten sich von der Arachidonsäurekaskade ab wie die Prostaglandine, Prostacycline, Thromboxana und Leucotriene. Alle diese Verbindungen sind biologisch aktive Eicosanoide, die aus 20 C-Atomen bestehen. Lipoxine können im Organismus auf verschiedenen Biosynthesewegen entstehen: über die Lipoxygenase sowie über die Zell-Zell-Wechselwirkungen. Untersuchungen ergaben, dass die Lipoxine selektive biologische Wirkungen zeigen, die eine wichtige Rolle vor allem in Entzündungsprozessen und Infektabwehr zeigen. Da aber diese Moleküle rasch isomerisieren, sind diese hohen Aktivitäten mit einer sehr geringen Stabilität gekoppelt. Aufgrund dieser Instabilität konnte die biologisch aktive Konformation des Lipoxin A4 am Rezeptor nicht eindeutig bestimmt werden. Zur besseren Untersuchung der Lipoxinrezeptor-Anordnung wurden deshalb stabile Analoga synthetisiert. Die biologische Aktivität des nach Nokami et al hergestellten Lipoxin A4-Analogons weicht sehr stark von der des Lipoxins ab. Angeregt durch diese Arbeiten wurde in der Arbeitsgruppe Nubbemeyer die Idee entwickelt, das konjugierte Tetraensystem des Lipoxin A4-Moleküls durch das Cycloheptatrien nachzuahmen. Die CH2-Gruppe bildet eine Brücke, die die Isomerisierung vom aktiven cis-Isomer zu den inaktiven trans-Isomeren verhindern soll. Mit diesem Cycloheptatriengerüst als Lipoxin A4-Analogon hoffen wir das Lipoxingerüst unwesentlich zu verändern und die damit verbundene biologische Aktivität zu erhalten. Die Synthese des 9,14-Methylen-LXA4 soll möglichst konvergent erfolgen, so dass gegebenenfalls auf Bausteine zurückgegriffen werden kann, deren Aufbau bereits optimiert wurde. Eine derartige Strategie ermöglicht darüber hinaus die Herstellung einer großen Zahl von weiteren potentiell interessanten Verbindungen ohne komplettes Umstellen der Synthese. Wichtige Reaktionen im Verlauf dieser Synthese sind: bei der Synthese des C8-C20-Bausteins: Friedel-Crafts-Acylierungen, Haloform-Reaktion, Veresterung mittels Standardmethoden, enantioselektive Reduktion mit dem chiralen CBS-Katalysator und Schutzgruppenoperation. bei der Synthese des C1-C7-Bausteins: ex-chiral-pool-Synthese aus 2-Desoxy-D-ribose, Wittig-Reaktion, Hydrierung mit Pd/C, Schutzgruppenoperation, Abspaltung von Schutzgruppen und Swern-Oxidation zum Aldehyd. Die Schlüsselreaktion der ganzen Synthese ist die Eintopf-Variante der Julia-Olefinierung nach Kocienski: selektiver Aufbau des trans-Olefins durch Verknüpfung der beiden Bausteine. Nach weiteren Schutzgruppenoperationen (und Öffnung des Valerolactons) wird der Methylester des 9,14-Lipoxin A4 erhalten, dessen biologische Aktivität zweifelsfrei bewiesen wurde.

Sustainable processes using heterogeneous acid catalysts. Some examples of industrial interest.

In recent years the need for the design of more sustainable processes and the development of alternative reaction routes to reduce the environmental impact of the chemical industry has gained vital importance. Main objectives especially regard the use of renewable raw materials, the exploitation of alternative energy sources, the design of inherently safe processes and of integrated reaction/separation technologies (e.g. microreactors and membranes), the process intensification, the reduction of waste and the development of new catalytic pathways. The present PhD thesis reports results derived during a three years research period at the School of Chemical Sciences of Alma Mater Studiorum-University of Bologna, Dept. of Industrial Chemistry and Materials (now Dept. of Industrial Chemistry “Toso Montanari”), under the supervision of Prof. Fabrizio Cavani (Catalytic Processes Development Group). Three research projects in the field of heterogeneous acid catalysis focused on potential industrial applications were carried out. The main project, regarding the conversion of lignocellulosic materials to produce monosaccharides (important intermediates for production of biofuels and bioplatform molecules) was financed and carried out in collaboration with the Italian oil company eni S.p.A. (Istituto eni Donegani-Research Center for non-Conventional Energies, Novara, Italy) The second and third academic projects dealt with the development of green chemical processes for fine chemicals manufacturing. In particular, (a) the condensation reaction between acetone and ammonia to give triacetoneamine (TAA), and (b) the Friedel-Crafts acylation of phenol with benzoic acid were investigated.

Beyond simple proton transfer processes: domino reactions between 4-substituted indoles and nitroethene as a new gateway to ergot alkaloids

The multimodal biology activity of ergot alkaloids is known by humankind since middle ages. Synthetically modified ergot alkaloids are used for the treatment of various medical conditions. Despite the great progress in organic syntheses, the total synthesis of ergot alkaloids remains a great challenge due to the complexity of their polycyclic structure with multiple stereogenic centres. This project has developed a new domino reaction between indoles bearing a Michael acceptor at the 4 position and nitroethene, leading to potential ergot alkaloid precursors in highly enantioenriched form. The reaction was optimised and applied to a large variety of substrate with good results. Even if unfortunately all attempts to further modify the obtained polycyclic structure failed, it was found a reaction able to produce the diastereoisomer of the polycyclic product in excellent yields. The compounds synthetized were characterized by NMR and ESIMS analysis confirming the structure and their enantiomeric excess was determined by chiral stationary phase HPLC. The mechanism of the reaction was evaluated by DFT calculations, showing the formation of a key bicoordinated nitronate intermediate, and fully accounting for the results observed with all substrates. The relative and absolute configuration of the adducts were determined by a combination of NMR, ECD and computational methods.

Synthese von antiinflammatorischen Makrolactonen des Oxacyclododecindion-Typs und deren biologische Evaluierung

Die Sekundärmetabolite 4-Dechlor-14-deoxyoxacyclododecindion, 14-Deoxyoxacyclo-dodecindion und Oxacyclododecindion zeigten in ersten in vitro-Studien eine Hemmung des TGF-β- sowie des JAK-STAT-Signaltransduktionsweges im nanomolaren Konzentrationsbereich. Sie stellen potentielle Leitstrukturen für die Entwicklung neuer Therapeutika zur Behandlung chronisch entzündlicher und/oder fibrotischer Erkrankungen dar. Ziel dieser Arbeit war die Entwicklung eines totalsynthetischen Zugangs zu diesen Makrolactonen.rnDer erste retrosynthetische Ansatz bestand aus einer Ringschluss-Metathese/Reduktions/Eliminierungs-Sequenz. Während das gesättigte Makrolacton-grundgerüst dargestellt werden konnte, schlug die Einführung der Doppelbindung fehl. Es wurde nur ein exo-Methylen-Derivat erhalten. Eine Syntheseroute über eine carbonylierende Kreuzkupplung oder über eine intramolekulare Hydroacylierung verliefen erfolglos. Versuche zum Aufbau des α,β-ungesättigten Enons über das β,γ-ungesättigte Enon in einer Ringschluss-Metathese/Isomerisierungs-Sequenz führten stattdessen zur Bildung eines γ,δ-ungesättigten Ketons und eines 12-Oxo-10,11-dehydrocurvularin-Derivates.rnEine intramolekulare Friedel-Crafts-Acylierung ermöglichte den Ringschluss, sodass die beiden Naturstoffe 4-Dechlor-14-deoxyoxacyclododecindion sowie 14-Deoxyoxa-cyclododecindion synthetisiert werden konnten. Durch die Totalsynthese konnte zudem die bisher unbekannte relative Konfiguration der zwei Stereozentren aufgeklärt werden. Die während dieser Arbeit erhaltenen Derivate ermöglichten es, Struktur-Wirkungs-Beziehungen für diese Makrolactone aufzustellen.rnIn weiteren biologischen Studien von Kooperationspartnern wurde die hohe Wirksamkeit im nanomolaren Konzentrationsbereich bestätigt. Eine erste in vivo-Studie zur Behandlung von systemischem Lupus erythematodes mit 14-Deoxyoxacyclododecindion deutet auf eine verminderte Entzündungsreaktion und positive Effekte auf chronische Nierenschäden hin.rn

Enantioselective alkylation of β-keto esters promoted by dimeric Cinchona-derived ammonium salts as recoverable organocatalysts

Dimeric anthracenyldimethyl-derived Cinchona ammonium salts are used as chiral organocatalysts in 5 mol% for the phase-transfer enantioselective alkylation reaction of 2-alkoxycarbonyl-1-indanones with activated bromides. The corresponding adducts bearing a new all-carbon quaternary center are obtained usually in high yield and with moderate and opposite enantioselectivity (up to 55%) when using ammonium salts derived from quinidine and its pseudoenantiomer quinine as organocatalysts. These catalysts can be almost quantitatively recovered by precipitation in ether and reused.

Insights into the Active Species of Nanoparticle-Functionalized Hierarchical Zeolites in Alkylation Reactions

Supported iron oxide nanoparticles have been incorporated onto hierarchical zeolites by microwave-assisted impregnation and mechanochemical grinding. Nanoparticle-functionalised porous zeolites were characterised by a number of analytical techniques such as XRD, N2 physisorption, TEM, and surface acidity measurements. The catalytic activities of the synthesised nanomaterials were investigated in an alkylation reaction. The results pointed to different species with varying acidity and accessibility in the materials, which provided essentially different catalytic activities in the alkylation of toluene with benzyl chloride under microwave irradiation, selected as the test reaction.

The chemical structure and mechanical properties of phenolic resins and related polymers

Paper-based phenolic laminates are used extensively in the electrical industry. Many small components are fabricated from these materials by the process known as punching. Recently an investigation was carried out to study the effect of processing variables on the punching properties. It was concluded that further work would be justified and that this should include a critical examination of the resin properties in a more controlled and systematic manner. In this investigation an attempt has been made to assess certain features of the resin structure in terms of thermomechanical properties. The number of crosslinks in the system was controlled using resins based on phenol and para-cresol formulations. Intramolecular hydrogen bonding effects were examined using substituted resins and a synthetically derived phenol based on 1,3-di-(o-hydroxyphenyl) propane.. A resin system was developed using the Friedel Crafts reaction to examine inter-molecular hydrogen bonding at the resin-paper interface. The punching properties of certain selected resins were assessed on a qualitative basis. In addition flexural and dynamic mechanical properties were determined in a general study of the structure-property relationships of these materials. It has been shown that certain features of the resin structure significantly influenced mechanical properties. :F'urther, it was noted that there is a close relationship between punching properties, mechanical damping and flexural strain. This work includes a critical examination of the curing mechanism and views are postulated in an attempt to extend knowledge in this area of the work. Finally, it is argued that future work should be based on a synthetic approach and that dynamic mechanical testing would provide a powerful tool In developing a deeper understanding of the resin fine structure.

A stereoselective total synthesis of (−)-seychellene

A stereoselective total synthesis of the tricyclic sesquiterpene (−)-seychellene, starting from (R)-carvone via (R)-3-methylcarvone has been accomplished, employing a combination of intermolecular Michael addition–intramolecular Michael addition sequence, a stereoselective hydrogenation, and an intramolecular alkylation reaction.

Synthetic investigations on testerone and its analogues—I *1: The total synthesis of 8-isotestosterone and its anthracene analogue

The total synthesis of 8-isotestosterone (II) and the corresponding anthracene analogue (III) following the benzohydrindane route is reported. Catalytic hydrogenation of trans-1β-acetoxy-8-methyl-4,5-(3′-methyl-4′-hydroxybenzo)-hydrindane (V) followed by oxidation has furnished two isomeric tricyclic keto acetates, viz. 1β,2α-(3′-acetoxycyclopentano)-2,5-dimethyl-6-keto-1α,2,3,4,4aα,-5α,6,7,8,8aα-decahydronaphthalene (VII) and 1β,2α-(3′-acetoxycyclopentano)-2,5-dimethyl-6-keto-1α,2,3,4,4aβ,5,6,7,8,8aβ-decahydronaphthalene (IX) which are cis-non-steroid and cis-steroid configurations of the same cyclopentano-cis-decalins. A difference in the direction of enolization of the keto acetate (VII) in alkylation reaction and enol acetylation towards the methine and the methylene carbon atoms respectively has been observed.

Radical Annulation Strategy to Chiral Pupukeanones: Total Synthesis of (+)-10-ex&l(- Naphthyl)pupukean-9-onea nd (+)-lO-exo-l(- Naphthyl)-5-epipupukean-9-ones1

Intramolecular alkylation reaction of the bromoenone 12, obtained from S-carvone in three steps, furnished the bicyclo[2.2.2]octenone 13. Contrary to the anticipated radical annulation reaction, the bicyclic bromides 14 and 15, obtained from the enone 13, generated exclusively the cyclopropane product 18 via a 3-exo-trig radical cyclization on reaction with nBu3SnH and AIBN, even in the presence of a large excess of a radicophile. On the other hand, bromoenone 24, synthesized from R-carvone via S-naphthylcarvone 21, underwent radical annulation reaction in the presence of radicophiles to furnish the isotwistanes 25-28 in a regio- and stereospecific manner. Hydrogenation of the olefin 34, obtained from the diketone 27 via a regiospecific Wittig reaction, furnished the naphthyl-5-epipupukean-9-one 33, whereas stereoselective hydrogenation of the enone 36, prepared from the keto ester 25 via a Grignard reaction and dehydration sequence, generated the naphthylpupukeanone 32.