Biosurfactants in food industry

The increasing environmental concern about chemical surfactants triggers attention to microbial-derived surface-active compounds essentially due to their low toxicity and biodegradable nature. At present, biosurfactants are predominantly used in remediation of pollutants; however, they show potential applications in many sectors of food industry. Associated with emulsion forming and stabilization, antiadhesive and antimicrobial activities are some properties of biosurfactants, which could be explored in food processing and formulation. Potential applications of microbial surfactants in food area and the use of agroindustrial wastes as alternative substrates for their production are discussed.

Bioactive Compounds in Lipid Fractions of Pumpkin (Cucurbita sp) Seeds for Use in Food

Conselho Nacional de Desenvolvimento Cient��fico e Tecnol��gico (CNPq)

Evaluation of rhamnolipid and surfactin to reduce the adhesion and remove biofilms of individual and mixed cultures of food pathogenic bacteria

Biofilms represent a great concern for food industry, since they can be a source of persistent contamination leading to food spoilage and to the transmission of diseases. To avoid the adhesion of bacteria and the formation of biofilms, an alternative is the pre-conditioning of surfaces using biosurfactants, microbial compounds that can modify the physicochemical properties of surfaces changing bacterial interactions and consequently adhesion. Different concentrations of the biosurfactants, surfactin from Bacillus subtilis and rhamnolipids from Pseudomonas aeruginosa, were evaluated to reduce the adhesion and to disrupt biofilms of food-borne pathogenic bacteria. Individual cultures and mixed cultures of Staphylococcus aureus, Listeria monocytogenes and Salmonella Enteritidis were studied using polystyrene as the model surface. The pre-conditioning with surfactin 0.25% reduced by 42.0% the adhesion of L monocytogenes and S. Enteritidis, whereas the treatment using rhamnolipids 1.0% reduced by 57.8% adhesion of L monocytogenes and by 67.8% adhesion of S. aureus to polystyrene.Biosurfactants were less effective to avoid adhesion of mixed cultures of the bacteria when compared with individual cultures. After 2 h contact with surfactin at 0.1% concentration, the pre-formed biofilms of S. aureus were reduced by 63.7%, L. monocytogenesby 95.9%, S. Enteritidis by 35.5% and the mixed culture biofilm by 58.5%. The rhamnolipids at 0.25% concentration removed 58.5% the biofilm of S. aureus, 26.5% of L monocytogenes, 23.0% of S. Enteritidis and 24.0% the mixed culture after 2 h contact. In general, the increase in concentration of biosurfactants and in the time of contact decreased biofilm removal percentage. These results suggest that surfactin and rhamnolipids can be explored to control the attachment and to disrupt biofilms of individual and mixed cultures of the food-borne pathogens. (C) 2011 Elsevier Ltd. All rights reserved.

Genetic diversity, virulence genes and antimicrobial resistance of Salmonella Enteritidis isolated from food and humans over a 24-year period in Brazil

Salmonellosis is a major health problem worldwide. Serovar Enteritidis has been a primary cause of Salmonella outbreaks in many countries. In Brazil, few molecular typing studies have been performed. The aims of this study were to molecularly type Salmonella Enteritidis strains isolated in Brazil in order to determine the genetic relationship between strains of food and human origin, as well as, to assess their pathogenic potential and antimicrobial resistance. A total of 128 S. Enteritidis strains isolated from human feces (67) and food (61) between 1986 and 2010 were studied. The genotypic diversity was assessed by ERIC-PCR and PFGE using Xbal, the antimicrobial resistance by the disc-diffusion assay and the presence of the SPI-1, SPI-2 and pSTV virulence genes assessed by PCR. The ERIC-PCR results revealed that 112 strains exhibited a similarity of >85.4% and the PFGE that 96 strains exhibited a similarity of >80.0%. Almost all strains (97.6%) harbored all 13 virulence genes investigated. Thirty-six strains (28.12%) were resistant to nalidixic acid. In conclusion, the nalidixic acid resistance observed after 1996 is indicative of an increase in the use of this drug. It may be suggested that these 128 strains might have descended from a common ancestor that differed little over 24 years and has been both contaminating food and humans and causing disease for more than two decades in Brazil. (c) 2012 Elsevier Ltd. All rights reserved.

Rapid sample preparation procedure for As speciation in food samples by LC-ICP-MS

This paper describes a rapid method for arsenic (As) speciation by LC-ICP-MS in several types of food samples. Prior to analysis, samples were milled and the As species extracted from biological tissues by sonication in only 2 min with a solution containing MeOH (10%, v/v) plus HNO3 (2%, v/v). As species were separated by LC using an anion exchange column. Method detection limits for AsB, As3+,DMA, MMA and As5+ were 1.3, 0.9, 0.6, 0.7 and 0.8 ng g(-1), respectively. Method accuracy and precision were traceable to Certified Reference Materials SRM1577 bovine liver from the National Institute of Standards and Technology, CE278 mussel tissue from the Institute of Reference Materials and Measurements and DOLT-3 dogfish liver tissue and DORM-3 fish protein from the National Research Council of Canada. Finally, the method was applied to speciate As in food samples (egg, fish muscle, beef and chicken) purchased in Brazilian markets.

Genotoxic and mutagenic effects of erythrosine B, a xanthene food dye, on HepG2 cells

Erythrosine (ErB) is a xanthene and an US Food and Drug Administration approved dye used in foods, drugs and cosmetics. Although its utilization is permitted, ErB is described as inhibitor of enzymes and protein-protein interactions and is toxic to pituitary and spermatogenesis processes. However, the genotoxicity and mutagenicity of ErB is inconclusive in the literature. This study aimed to analyze the genotoxicity of this dye using the alkaline comet assay and is the first investigation to evaluate ErB mutagenicity using the cytokinesis block micronucleus cytome (CBMN-Cyt) assay in HepG2 cells. These cells were chosen because they produce phase I and phase II enzymes that can mimic in vivo metabolism. The cells were treated with seven concentrations (0.1-70.0 mu g mL(-1)) of ErB, and the results showed genotoxicity at the two highest concentrations and mutagenicity at six concentrations. Furthermore, as micronuclei result from clastogenic and aneugenic processes, while comet assay is often considered more sensitive and detects DNA single strain breaks, we suggest that an aneugenic is responsible for the observed damage. Although ErB is approved for use in the food, cosmetic and pharmaceutical industries, it must be used carefully because it damages the DNA structure. (C) 2012 Elsevier Ltd. All rights reserved.

Development of cellulose-based bactericidal nanocomposites containing silver nanoparticles and their use as active food packaging

The use of nanomaterials, including metallic as active fillers in polymeric nanocomposites for food packaging has been extensively investigated. Silver nanoparticles (AgNPs), in particular, have been exploited for technological applications as bactericidal agents. In this paper, AgNPs were incorporated into a hydroxypropyl methylcellulose (HPMC) matrix for applications as food packaging materials. The average sizes of the silver nanoparticles were 41 nm and 100 nm, respectively. Mechanical analyses and water vapor barrier properties of the HPMC/AgNPs nanocomposites were analysed. The best results were observed for films containing smaller (41 nm) AgNPs. The antibacterial properties of HPMC/AgNPs thin films were evaluated based on the diameter of inhibition zone in a disk diffusion test against Escherichia coli (E. coil) and Staphylococcus aureus (S. aureus). The disk diffusion studies revealed a greater bactericidal effectiveness for nanocomposites films containing 41 nm Ag nanoparticles. (C) 2011 Elsevier Ltd. All rights reserved.

Pet food: quality and quality improvement

Today���s pet food industry is growing rapidly, with pet owners demanding high-quality diets for their pets. The primary role of diet is to provide enough nutrients to meet metabolic requirements, while giving the consumer a feeling of well-being. Diet nutrient composition and digestibility are of crucial importance for health and well being of animals. A recent strategy to improve the quality of food is the use of ���nutraceuticals��� or ���Functional foods���. At the moment, probiotics and prebiotics are among the most studied and frequently used functional food compounds in pet foods. The present thesis reported results from three different studies. The first study aimed to develop a simple laboratory method to predict pet foods digestibility. The developed method was based on the two-step multi-enzymatic incubation assay described by Vervaeke et al. (1989), with some modification in order to better represent the digestive physiology of dogs. A trial was then conducted to compare in vivo digestibility of pet-foods and in vitro digestibility using the newly developed method. Correlation coefficients showed a close correlation between digestibility data of total dry matter and crude protein obtained with in vivo and in vitro methods (0.9976 and 0.9957, respectively). Ether extract presented a lower correlation coefficient, although close to 1 (0.9098). Based on the present results, the new method could be considered as an alternative system of evaluation of dog foods digestibility, reducing the need for using experimental animals in digestibility trials. The second parte of the study aimed to isolate from dog faeces a Lactobacillus strain capable of exert a probiotic effect on dog intestinal microflora. A L. animalis strain was isolated from the faeces of 17 adult healthy dogs..The isolated strain was first studied in vitro when it was added to a canine faecal inoculum (at a final concentration of 6 Log CFU/mL) that was incubated in anaerobic serum bottles and syringes which simulated the large intestine of dogs. Samples of fermentation fluid were collected at 0, 4, 8, and 24 hours for analysis (ammonia, SCFA, pH, lactobacilli, enterococci, coliforms, clostridia). Consequently, the L. animalis strain was fed to nine dogs having lactobacilli counts lower than 4.5 Log CFU per g of faeces. The study indicated that the L animalis strain was able to survive gastrointestinal passage and transitorily colonize the dog intestine. Both in vitro and in vivo results showed that the L. animalis strain positively influenced composition and metabolism of the intestinal microflora of dogs. The third trail investigated in vitro the effects of several non-digestible oligosaccharides (NDO) on dog intestinal microflora composition and metabolism. Substrates were fermented using a canine faecal inoculum that was incubated in anaerobic serum bottles and syringes. Substrates were added at the final concentration of 1g/L (inulin, FOS, pectin, lactitol, gluconic acid) or 4g/L (chicory). Samples of fermentation fluid were collected at 0, 6, and 24 hours for analysis (ammonia, SCFA, pH, lactobacilli, enterococci, coliforms). Gas production was measured throughout the 24 h of the study. Among the tested NDO lactitol showed the best prebiotic properties. In fact, it reduced coliforms and increased lactobacilli counts, enhanced microbial fermentation and promoted the production of SCFA while decreasing BCFA. All the substrates that were investigated showed one or more positive effects on dog faecal microflora metabolism or composition. Further studies (in particular in vivo studies with dogs) will be needed to confirm the prebiotic properties of lactitol and evaluate its optimal level of inclusion in the diet.

Applications of infrared thermography in the food industry

In the last 20-30 years, the implementation of new technologies from the research centres to the food industry process was very fast. The infrared thermography is a tool used in many fields, including agriculture and food science technology, because of it's important qualities like non-destructive method, it is fast, it is accurate, it is repeatable and economical. Almost all the industrial food processors have to use the thermal process to obtain an optimal product respecting the quality and safety standards. The control of temperature of food products during the production, transportation, storage and sales is an essential process in the food industry network. This tool can minimize the human error during the control of heat operation, and reduce the costs with personal. In this thesis the application of infrared thermography (IRT) was studies for different products that need a thermal process during the food processing. The background of thermography was presented, and also some of its applications in food industry, with the benefits and limits of applicability. The measurement of the temperature of the egg shell during the heat treatment in natural convection and with hot-air treatment was compared with the calculated temperatures obtained by a simplified finite element model made in the past. The complete process shown a good results between calculated and observed temperatures and we can say that this technique can be useful to control the heat treatments for decontamination of egg using the infrared thermography. Other important application of IRT was to determine the evolution of emissivity of potato raw during the freezing process and the control non-destructive control of this process. We can conclude that the IRT can represent a real option for the control of thermal process from the food industry, but more researches on various products are necessary.

Point-of-sale machines in school cafeterias and parental influence on child food choices

The prevalence of obesity has reached epidemic proportions in the United States. Twenty-five percent of school aged students are overweight. Schools have the opportunity to help slow this epidemic. School cafeterias in the United States feed millions of students every day through the National School Lunch Program.^ Point-of-sale machines are used in most school cafeterias to help streamline the process of purchasing school lunches. The point-of-sale software allows school personnel to place special notes on student's accounts to provide alerts about parental requests. This study investigated what the alerts are used for, who uses the alerts, and if there are any patterns by demographic characteristics. ^ Counts and percentages were used to determine what the alerts were used for and who used them. This study found that students who were white non-Hispanic, paid status, or in elementary school were most likely to have alerts placed on their accounts. Also, the majority of point-of-sale alerts were used as allowances (i.e., allowed to purchase snacks from the balance on the school lunch account), rather than restrictions (i.e., restricted from purchasing high calorie foods or specific food items). Using chi-square analysis, a total of 688 alerts were analyzed. There were significant differences in alert frequencies for intent category by grade level (p=0.000), snack access (p=0.000), and gender (p=0.002). Therefore, the results are significant, and one can conclude there is a significant relationship between gender, grade level, and snack access, and the presence of an alert on the school lunch account.^ Also, school administrators may want to take into consideration possible changes to their program, such as requiring more time to run the software. The results of this study can assist school administrators to better understand that a point-of-sale alert program may help their school lunch programs run more efficiently, while also providing parental influence on students��� food choices at the point-of-sale.^ School food service authorities should consider implementing a structured point-of-sale alert policy to encourage parental input on their children's food choices. When implementing the point-of-sale policy, schools should publicize this policy online, through school lunch menus, and parent communications increase participation throughout the school district.^

A critical review: Why isn't "cold pasteurization" being used widespread as a method to prevent food-related illnesses as a result of the consumption of ready-to-eat, fresh fruits, and vegetables

The Centers for Disease Control estimates that foodborne diseases cause approximately 76 million illnesses, 325,000 hospitalizations, and 5,000 deaths in the United States each year. The American public is becoming more health conscious and there has been an increase in the dietary intake of fresh fruits and vegetables. Affluence and demand for convenience has allowed consumers to opt for pre-processed packaged fresh fruits and vegetables. These pre-processed foods are considered Ready-to-Eat. They have many of the advantages of fresh produce without the inconvenience of processing at home. After seeing a decline in food-related illnesses between 1996 and 2004, due to an improvement in meat and poultry safety, tainted produce has tilted the numbers back. This has resulted in none of the Healthy People 2010 targets for food-related illness reduction being reached. Irradiation has been shown to be effective in eliminating many of the foodborne pathogens. The application of irradiation as a food safety treatment has been widely endorsed by many of the major associations involved with food safety and public health. Despite these endorsements there has been very little use of this technology to date for reducing the disease burden associated with the consumption of these products. A review of the available literature since the passage of the 1996 Food Quality Protection Act was conducted on the barriers to implementing irradiation as a food safety process for fresh fruits and vegetables. The impediments to adopting widespread utilization of irradiation food processing as a food safety measure involve a complex array of legislative, regulatory, industry, and consumer issues. The FDA���s approval process limits the expansion of the list of foods approved for the application of irradiation as a food safety process. There is also a lack of capacity within the industry to meet the needs of a geographically dispersed industry.^

Globesity: Food marketing to children in Asia-Pacific A systematic review

Food advertising and promotion to children has been identified as one possible contributing factor to the childhood obesity pandemic. Food marketing to children in "western" society consists mainly of foods that are high in fat, sugar and salt (HFSS), such as pre-sugared breakfast cereals; sugar sweetened beverages (SSBs); confectionary; savory snacks; and fast food. Of these heavily marketed items consumption of, SSBs, savory snacks and fast foods have been found to contribute to the childhood obesity pandemic. A systematic review was conducted to determine what types of products are being promoted and what types of techniques food marketers are using to promote these foods throughout the Asia-Pacific region. The review of current literature, while not abundant, clearly showed marketing styles and content similar to those in western countries were being employed in the Asia-Pacific. Advertisements in this geographic region often took on a local flair to make them more identifiable to children and adolescents in their respective regions and countries, due to the numerous cultural and traditional differences. Children in these developing parts of the world may be just as, if not more, susceptible to these advertising techniques than their counterparts in the west.^

Legal regulation of the food industry as a public health measure

Background. The Food and Drug Administration (FDA) is an agency of the federal government that is responsible for monitoring and maintaining public health through the regulation of many industries, including food safety. Through the Nutrition Labeling and Education Act of 1990, the FDA was granted authority over the implementation and regulation of nutrition labeling on packaged foods. Many nutrients are printed on nutrition labels as well as their percent Daily Values. Research has been undertaken to examine the evidentiary basis the FDA relied upon in making its determinations regarding which nutrients to include on nutrition labels as well as their Daily Values. ^ Methods. Relevant legal policies, scientific studies, and other published literature (either in print or electronic form) were used to collect data. ^ Results. Results demonstrated that the FDA did not employ one single method in its determination of which nutrients to select for inclusion on food labels. The agency relied upon current public heath studies of that time as well as recommendations from the U.S. Surgeon General.^

MRI and Bidimensional relaxometry sequences for macro and microstructure assessment in food models.

Physico-chemical and organoleptic characteristics of food depend largely on the microscopic level distribution of gases and water, and connectivity and mobility through the pores. Microstructural characterization of food can be accomplished by Magnetic Resonance Imaging (MRI) and Nuclear Magnetic Spectroscopy (NMR) combined with the application of methods of dissemination and multidimensional relaxometry. In this work, funded by the EC Project InsideFood, several artificial food models, based on foams and gels were studied using MRI and 2D relaxometry. Two different kinds of foams were used: a sugarless and a sugar foam. Then, a half of a syringe was filled with the sugarless foam and the other half with the sugar foam. Then, MRI and NMR experiments were performed and the sample evolution was observed along 3 days in order to quantify macrostructural changes through proton density images and microstructural ones using T1T2 maps, using an inversion CPMG sequence. On the proton density images it may be seen that after 16 hours it was possible to differentiate the macrostructural changes, as the apparition of free water due to a syneresis phenomenon. On the interface it can be seen a brighter area after 16 hours, due to the occurrence of free water. Moreover, thanks to the bidimensional relaxometry (T1-T2) it was possible to differentiate among microscopic changes. Differences between the pores size can be observed as well as the microstructure evolution after 30.5 hours, as a consequence differences are shown on free water redistribution through larger pores and capillarity phenomena between both foams.