Effect of melatonin on DNA damage of bovine cumulus cells during in vitro maturation (IVM) and on in vitro embryo development

The effect of melatonin during in vitro maturation (IVM) on DNA damage of cumulus cells (CCs) from bovine cumulus-oocyte complexes (COCs) and embryo development was evaluated. COCs from abattoir ovaries were cultured in maturation medium (MM) with 0.5 mu g/ml FSH and 5.0 mu g/ml LH (FSH-LH); 10(-9) M melatonin (MEL) or FSH-LH + MEL (FSH-LH-MEL). After 24 h of in vitro maturation, the CCs surrounding the oocyte were subjected to DNA analysis by Comet assay. After in vitro fertilization and in vitro embryo culture, the embryo development rates were evaluated on day 2 post insemination (cleavage) and days 7-8 (blastocyst). The percentage of CCs with no DNA damage was significantly superior in MEL group (37.6 +/- 2.4) than in FSH-LH-MEL (28.0 +/- 2.4) and FSH-LH (17.8 +/- 2.41) groups. Cleavage and blastocysts rates were similar among groups. Melatonin during IVM protects the CCs from DNA damage but this effect did not influence embryo development in vitro. (C) 2010 Elsevier Ltd. All rights reserved.

Single-cell expression analysis of BMP15 and GDF9 in mature oocytes and BMPR2 in cumulus cells of women with polycystic ovary syndrome undergoing controlled ovarian hyperstimulation

To detect expression of bone morphogenetic protein 15 (BMP15) and growth differentiation factor 9 (GDF9) in oocytes, and their receptor type 2 receptor for BMPs (BMPR2) in cumulus cells in women with polycystic ovary syndrome (PCOS) undergoing in vitro fertilization (IVF), and determine if BMPR2, BMP15, and GDF9 expression correlate with hyperandrogenism in FF of PCOS patients. Prospective case-control study. Eighteen MII-oocytes and their respective cumulus cells were obtained from 18 patients with PCOS, and 48 MII-oocytes and cumulus cells (CCs) from 35 controls, both subjected to controlled ovarian hyperstimulation (COH), and follicular fluid (FF) was collected from small (10-14 mm) and large (> 18 mm) follicles. RNeasy Micro Kit (Qiagen(A (R))) was used for RNA extraction and gene expression was quantified in each oocyte individually and in microdissected cumulus cells from cumulus-oocyte complexes retrieved from preovulatory follicles using qRT-PCR. Chemiluminescence and RIA assays were used for hormone assays. BMP15 and GDF9 expression per oocyte was higher among women with PCOS than the control group. A positive correlation was found between BMPR2 transcripts and hyperandrogenism in FF of PCOS patients. Progesterone values in FF were lower in the PCOS group. We inferred that BMP15 and GDF9 transcript levels increase in mature PCOS oocytes after COH, and might inhibit the progesterone secretion by follicular cells in PCOS follicles, preventing premature luteinization in cumulus cells. BMPR2 expression in PCOS cumulus cells might be regulated by androgens.

Adiponectin as a marker of success in intracytoplasmic sperm injection/embryo transfer cycles

Adiponectin (Acrp30) is an adipose tissue-derived protein whose serum concentrations, in contrast to leptin, are reported to be negatively correlated to body mass. In spite of the comparatively high circulating adiponectin concentrations, this protein has not been studied in the context of assisted reproduction to date. The aim of this preliminary project was thus to examine the potential of adiponectin to serve as a marker for fertility. We compared adiponectin levels in serum before and after controlled ovarian hyperstimulation, as well as in follicular fluid (FF), between two groups: those with successful outcome (clinical pregnancies) and those with implantation failure. In the former, adiponectin concentrations were higher than in the negative outcome group; this difference was statistically significant (p < 0.05) in serum on the day of oocyte pick-up (OPU) as well as two or three days before OPU, but not in FF or in serum at the beginning of the stimulation phase. This finding adds a new perspective to the suggested but still controversial reduction in FF leptin concentrations in the positive outcome group, and may become a useful tool for early prediction of success of in vitro fertilization treatment for a given patient.

Anti-Müllerian hormone and inhibin B as predictors of pregnancy after treatment by in vitro fertilization/intracytoplasmic sperm injection

OBJECTIVE: To evaluate anti-Müllerian hormone (AMH) as a marker of reproductive outcome after IVF/intracytoplasmic sperm injection (ICSI). DESIGN: Longitudinal study. SETTING: University hospital. PATIENT(S): Two hundred seventy-six consecutive women undergoing IVF/ICSI. INTERVENTION(S): Ovarian stimulation, oocyte retrieval, IVF, ICSI, embryo transfer, AMH, and inhibin B determinations in serum and follicular fluid (FF). MAIN OUTCOME MEASURE(S): The AMH and inhibin B concentrations in 276 matched FF/serum pairs have been determined. Different outcome groups have been compared and set in relation to the oocyte count, morphological parameters, and steroid hormone levels. RESULT(S): The concentrations of AMH and inhibin B in both serum and FF were significantly higher in the group of women who became pregnant in the corresponding treatment cycle than in those who did not conceive. Positive correlations were observed between serum inhibin B concentrations and embryo morphology (r = 0.126, 95% confidence interval 0.026-0.284). Serum and FF AMH or inhibin B correlated positively with the oocyte count and negatively with the pretreatment cycle day 3 FSH level and the total administered gonadotropin dose. CONCLUSION(S): The AMH and inhibin B levels on the day of oocyte retrieval are correlated to reproductive outcome.

Hormonal treatment of dairy goats affected by hydrometra associated or not with ovarian follicular cyst

Hydrometra is considered a very important pathological condition, because it represents one of the main causes of temporary infertility in dairy goats. The objective was (i) to evaluate a protocol for the treatment of hydrometra associated (n=2) or not (n=17) with follicular ovarian cyst in 19 dairy goats and (ii) to assess its reproductive efficiency after treatment. For this purpose, 10. mg of dinoprost (PGF) divided in two equal doses were administered to all animals intravulvosubmucosally on Days 0 and 10. In addition, 500. IU hCG were administered on Day 7. Ultrasound exams were performed in all females from Days 0 to 3, 7 and 10 to 13 of treatment, in order to evaluate uterus drainage after each treatment. Goats were monitored for estrus after both treatments and mated after the second dose of PGF. Blood samples were collected from 11 goats to determine plasma progesterone concentrations before, during and after treatment. Of the 19 goats treated, 16 lost weight after the first dose, probably due to uterine discharge. Complete drainage of uterine fluid was observed in 11/19 (57.9%) and 17/19 (89.5%) after the first and second doses, respectively. Afterwards, we diagnosed 2 more goats with follicular cysts, for a total of 21.1% (4/19) of animals exhibiting hydrometra and ovarian cyst concomitantly. In one doe the diagnosis was on Day 2 and in the other on Day 11. All does showed progesterone concentrations superior to 1. ng/mL at Day 0, with an average of 10.6 ± 1.4. ng/mL. Out of the 10 goats mated, only two became pregnant after treatment, corresponding to 10.5% of the total (2/19). Although prostaglandin was effective to drain the uterine fluid and led to the onset of estrus, it did not improve the pregnancy rate. The use of hCG in female goats was not effective in luteinizing the cysts. It can be concluded that hydrometra alone or associated with ovarian follicular cyst may adversely affect goat reproductive performance. © 2012 Elsevier B.V.

Effect of surface conditions on flow of a micropolar fluid driven by a porous stretching sheet

-

Screening for drugs in oral fluid : illicit drug use and drug driving in a sample of urban and regional Queensland motorists

Police services in a number of Australian states and overseas jurisdictions have begun to implement or consider random road-side drug testing of drivers. This paper outlines research conducted to provide an estimate of the extent of drug driving in a sample of Queensland drivers in regional, rural and metropolitan areas. Oral fluid samples were collected from 2657 Queensland motorists and screened for illicit substances including cannabis (delta 9 tetrahydrocannibinol [THC]), amphetamines, ecstasy, and cocaine. Overall, 3.8% of the sample (n = 101) screened positive for at least one illicit substance, although multiple drugs were identified in a sample of 23 respondents. The most common drugs detected in oral fluid were ecstasy (n = 53), and cannabis (n = 46) followed by amphetamines (n = 23). A key finding was that cannabis was confirmed as the most common self-reported drug combined with driving and that individuals who tested positive to any drug through oral fluid analysis were also more likely to report the highest frequency of drug driving. Furthermore, a comparison between drug vs. drink driving detection rates for one region of the study, revealed a higher detection rate for drug driving (3.8%) vs. drink driving (0.8%). This research provides evidence that drug driving is relatively prevalent on Queensland roads, and may in fact be more common than drink driving. This paper will further outline the study findings’ and present possible directions for future drug driving research.

A quasi stationary approach to drying kinetics of cylindrical food particulates in a heat pump asisted fluid bed dryer

Experiments were undertaken to study drying kinetics of moist cylindrical shaped food particulates during fluidised bed drying. Cylindrical particles were prepared from Green beans with three different length:diameter ratios, 3:1, 2:1 and 1:1. A batch fluidised bed dryer connected to a heat pump system was used for the experimentation. A Heat pump and fluid bed combination was used to increase overall energy efficiency and achieve higher drying rates. Drying kinetics, were evaluated with non-dimensional moisture at three different drying temperatures of 30, 40 and 50o C. Numerous mathematical models can be used to calculate drying kinetics ranging from analytical models with simplified assumptions to empirical models built by regression using experimental data. Empirical models are commonly used for various food materials due to their simpler approach. However problems in accuracy, limits the applications of empirical models. Some limitations of empirical models could be reduced by using semi-empirical models based on heat and mass transfer of the drying operation. One such method is the quasi-stationary approach. In this study, a modified quasi-stationary approach was used to model drying kinetics of the cylindrical food particles at three drying temperatures.

Flow of a micropolar fluid bounded by a stretching sheet

We consider boundary layer flow of a micropolar fluid driven by a porous stretching sheet. A similarity solution is defined, and numerical solutions using Runge-Kutta and quasilinearisation schemes are obtained. A perturbation analysis is also used to derive analytic solutions to first order in the perturbing parameter. The resulting closed form solutions involve relatively complex expressions, and the analysis is made more tractable by a combination of offline and online work using a computational algebra system (CAS). For this combined numerical and analytic approach, the perturbation analysis yields a number of benefits with regard to the numerical work. The existence of a closed form solution helps to discriminate between acceptable and spurious numerical solutions. Also, the expressions obtained from the perturbation work can provide an accurate description of the solution for ranges of parameters where the numerical approaches considered here prove computationally more difficult.

Solutions for the flow of a micropolar fluid in a porous channel

How various additives can increase some cardio-vascular diseases and effects of transport for albumin and glucose through permeable membranes are some important studies in biomechanics. The rolling phenomena of the leucocytes gives rise to an inflammatory reaction along a vascular wall. Initiated by Eringen [5], a micropolar fluid is a satisfactory model for flows of fluids which contain micro-constituents which can undergo rotation.

Initial CFD investigation of an MR fluid in a bicycle ergometer

A bicycle ergometer is a scientific device used by exercise physiologists which attempts to mimic on-road cycling characteristics such as foot technique, EMG activity, VO2, VCO2 and rider cardiology in a laboratory environment. Presently there are no known useful scientific ergometers that mimic these characteristics and are able to provide a satisfactory controlled resistance that is independent of speed. Previous research has suggested the use of a Magneto-Rheological (MR) Fluid as part of the ergometer design, as when used in a rotary brake application it is able to be controlled electronically to increase resistance instantly and independent of speed. In the target application, MR fluids are subject to immense tribological wear and temperature during viscous shearing, and will eventually show some degree of deterioration which is usually manifested as an increase in off-state viscosity. It is not known exactly how the fluid fails, however the amount of deterioration is related to the shear rate, temperature and duration and directly related to the power dissipation. Currently, there is very little literature that investigates the flow and thermal characteristics of MR fluid tribology using CFD. In this paper, we present initial work that aims to improve understanding of MR fluid wear via CFD modelling using Fluent, and results from the model are compared with those obtained from a experimental test rig of an MR fluid-based bicycle ergometer.