Ultraviolet photodetection of flexible ZnO nanowire sheets in polydimethylsiloxane polymer

ZnO nanowires are normally exposed to an oxygen atmosphere to achieve high performance in UV photodetection. In this work we present results on a UV photodetector fabricated using a flexible ZnO nanowire sheet embedded in polydimethylsiloxane (PDMS), a gas-permeable polymer, showing reproducible UV photoresponse and enhanced photoconduction. PDMS coating results in a reduced response speed compared to that of a ZnO nanowire film in air. The rising speed is slightly reduced, while the decay time is prolonged by about a factor of four. We conclude that oxygen molecules diffusing in PDMS are responsible for the UV photoresponse

Academics’ work and the concept of “profession” : an Australian case study

Universities in Australia and elsewhere have changed considerably in recent years. Inevitably, this has meant that the work of academics has also changed. Academics’ work is of importance because they are key players in universities and universities matter to the nation economically and intellectually in advancing knowledge and its practical application. Through the changes and challenges that have characterised academia in recent years, there is an assumption that academics’ work is representative of a profession. This research study investigates how academics construct their own perspectives regarding the academic "profession". The study is theoretically informed by Freidson’s theory that conceptualises professions as occupations if they are in control of their work rather than it being under the control of either the market or of their employing institutions. Two research questions guide this study. The first question investigates how academics might construct their work in ideal terms and the second one investigates the extent to which such constructions might constitute a "profession". A qualitative case study was conducted within two Australian universities. In all, twenty academics from ten disciplines took part in the study that consisted of a focus group and fifteen individual interviews. The study was conducted in three phases during which a conceptual framework of academics’ work was developed across three versions. This framework acted both a prompt to discussion and as a potential expression of academics’ work. The first version of the framework was developed from the literature during the first phase of the study. This early framework was used during the second phase of the study when five academics took part in a focus group. After the focus group, the second version of the framework was developed and used with fifteen academics in individual interviews during phase three of the study. The third version of the framework was the outcome of a synthesis of the themes that were identified in the data. The discussion data from the focus group and the individual interviews were analysed through a content analysis approach that identified four major themes. The first theme was that academics reported that their work would ideally be located within universities committed to using their expert knowledge to serve the world. The second theme was that academics reported that they wanted sufficient thinking time and reasonable workloads to undertake the intellectual work that they regard as their core responsibility, particularly in relation to undertaking research. They argued against heavy routine administrative workloads and sought a continuation of current flexible working arrangements. The third theme was that teaching qualifications should not be mandated but that there should be a continuation of the present practice of universities offering academics the opportunity to undertake formal teaching qualifications if they wish to. Finally, academics reported that they wanted values that have traditionally mattered to academia to continue to be respected and practised: autonomy, collegiality and collaborative relationships, altruism and service, and intellectual integrity. These themes are sympathetic to Freidson’s theory of professions in all but one matter: the non-mandatory nature of formal qualifications which he regards as absolutely essential for the performance of the complex intellectual work that characterises occupations that are professions. The study places the issue of academic professionalism on the policy agenda for universities wishing to identify academics’ work as a profession. The study contributes a theory-based and data-informed conceptual framework for academics’ work that can be considered in negotiating the nature and extent of their work. The framework provides a means of analysing what "academic professionalism" might mean; it adds specificity to such discussions by exploring a particular definition of profession, namely Freidson’s theory of professions as occupations that are in control of their own work. The study contributes to the development of theories around higher education concepts of academic professionalism and, in so doing, links that theoretical contribution to the wider professions field.

One size fits one : customizing work through manager-employee exchange

While prior research has addressed how collective workplace outcomes are negotiated between employers and trade unions, less attention has been afforded to the ‘everyday’, micro-level exchanges between managers and employees in adjusting work, alongside the ‘standard’ terms and conditions set out in employment contracts. Building on previous work on idiosyncratic deals and requests for flexible scheduling, this article presents the findings from a survey of Australian parents which addressed manager-employee exchanges which led to customized work arrangements. The survey examined the frequency with which various employment terms and conditions were negotiated, who initiated the interactions, where they occurred, and the extent of perceived compromise. The study revealed that manager-employee exchanges occur frequently in the context of roles in nuclear and extended families, and are influenced by the parameters around which formal childcare and educational settings function. Women rated the exchanges as more important than men, but men and women were similarly comfortable with the interactions and satisfied with outcomes. The findings have important implications for managers and organizations in terms of balancing the goals of efficiency with employees’ preferences for workplace flexibility and other terms beyond those which are standardized.

Work integrated learning: Exposure to professional practice : expectations and challenges

Prior to graduation engineering students are expected to provide evidence of relevant experience in the workplace. This experience is expected to provide opportunities for exposure to the profession and to help students develop confidence, skills and capabilities as emerging professionals. This investigation considers the expectations and challenges in implementing WIL programs in different contexts. While this will inform the next iteration of engineering course development at QUT the issues and interventions described provide useful insights into options available and engineering curriculum design more broadly. This comparative analysis across three phases highlights expectations and challenges including stakeholder responsibilities, expectations, and assessment. The study draws on the findings of a 2005 investigation into the purpose and provision of WIL and findings of a 2012 Faculty review of the current WIL model. The enhancement of WIL through a series of developmental phases highlights strengths and weaknesses of various models. It is anticipated that this investigation will inform course development decisions on a whole-of-course approach to WIL that improves student engagement and learning experience. The importance of WIL is not disputed. However with industry expectations, increasing student numbers and cohort diversity the ways in which students and industry currently engage in WIL are not sustainable and more creative, flexible and engaging approaches are needed.

Creating flexible mappings between building information models and cost information

During the early design stages of construction projects, accurate and timely cost feedback is critical to design decision making. This is particularly challenging for cost estimators, as they must quickly and accurately estimate the cost of the building when the design is still incomplete and evolving. State-of-the-art software tools typically use a rule-based approach to generate detailed quantities from the design details present in a building model and relate them to the cost items in a cost estimating database. In this paper, we propose a generic approach for creating and maintaining a cost estimate using flexible mappings between a building model and a cost estimate. The approach uses queries on the building design that are used to populate views, and each view is then associated with one or more cost items. The benefit of this approach is that the flexibility of modern query languages allows the estimator to encode a broad variety of relationships between the design and estimate. It also avoids the use of a common standard to which both designers and estimators must conform, allowing the estimator added flexibility and functionality to their work.

Development of a cost-effective and flexible vibration DAQ system for long-term continuous structural health monitoring

In the structural health monitoring (SHM) field, long-term continuous vibration-based monitoring is becoming increasingly popular as this could keep track of the health status of structures during their service lives. However, implementing such a system is not always feasible due to on-going conflicts between budget constraints and the need of sophisticated systems to monitor real-world structures under their demanding in-service conditions. To address this problem, this paper presents a comprehensive development of a cost-effective and flexible vibration DAQ system for long-term continuous SHM of a newly constructed institutional complex with a special focus on the main building. First, selections of sensor type and sensor positions are scrutinized to overcome adversities such as low-frequency and low-level vibration measurements. In order to economically tackle the sparse measurement problem, a cost-optimized Ethernet-based peripheral DAQ model is first adopted to form the system skeleton. A combination of a high-resolution timing coordination method based on the TCP/IP command communication medium and a periodic system resynchronization strategy is then proposed to synchronize data from multiple distributed DAQ units. The results of both experimental evaluations and experimental–numerical verifications show that the proposed DAQ system in general and the data synchronization solution in particular work well and they can provide a promising cost-effective and flexible alternative for use in real-world SHM projects. Finally, the paper demonstrates simple but effective ways to make use of the developed monitoring system for long-term continuous structural health evaluation as well as to use the instrumented building herein as a multi-purpose benchmark structure for studying not only practical SHM problems but also synchronization related issues.

Location and scale mixtures of Gaussians with flexible tail behaviour: Properties, inference and application to multivariate clustering

The family of location and scale mixtures of Gaussians has the ability to generate a number of flexible distributional forms. The family nests as particular cases several important asymmetric distributions like the Generalized Hyperbolic distribution. The Generalized Hyperbolic distribution in turn nests many other well known distributions such as the Normal Inverse Gaussian. In a multivariate setting, an extension of the standard location and scale mixture concept is proposed into a so called multiple scaled framework which has the advantage of allowing different tail and skewness behaviours in each dimension with arbitrary correlation between dimensions. Estimation of the parameters is provided via an EM algorithm and extended to cover the case of mixtures of such multiple scaled distributions for application to clustering. Assessments on simulated and real data confirm the gain in degrees of freedom and flexibility in modelling data of varying tail behaviour and directional shape.

Organisation Carescapes: Researching Organisations, Work and Care

This working paper develops an approach to the analysis of care as it is evident in the policies and practices of employing organisations. We identify how notions of care are incorporated in myriad and multi-faceted ways that may support, survey and control workers, as well as having implications for employers, managers, employees and workers. Aspects of care can be found in a range of statutory duties, policies and related activities, including: health and safety, equality and diversity, parental leave, religious observance, bullying and harassment, personal development, voluntary redundancy, early retirement, employer pension schemes, grievance procedures, and dismissal. The conceptual framework of organisation carescapes is offered as an aid to the analysis of employee policies and services. These policies and services are transformed by shifts in supranational and national policies such as European Union (EU) economic strategies and national legislation on disability rights legislation, age discrimination and flexible working, and changes in labour market competitiveness. In conclusion, we consider how the framework of organisation carescapes is informing research design in our and our colleagues’ ongoing programme of research.

Synthesis and characterization of flexible epoxy nanocomposites reinforced with amine functionalized alumina nanoparticles: a potential encapsulant for organic devices

Research on conducting polymers, organic light emitting diodes and organic solar cells has been an exciting field for the past decade. The challenge with these organic devices is the long term stability of the active material. Organic materials are susceptible to chemical degradation in the presence of oxygen and moisture. The sensitivity of these materials towards oxygen and moisture makes it imperative to protect them by encapsulation. Polymer nanocomposites can be used as encapsulation materials in order to prevent material degradation. In the present work, amine functionalized alumina was used as a cross-linking and reinforcing material for the polymer matrix in order to fabricate the composites to be used for encapsulation of devices. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and Raman spectroscopy were used to elucidate the surface chemistry. Thermogravimetric analysis techniques and CHN analysis were used to quantify grafting density of amine groups over the surface of the nanoparticles. Mechanical characterizations of the composites with various loadings were carried out with dynamic mechanical analyzer. It was observed that the composites have good thermal stability and mechanical flexibility, which are important for an encapsulant. The morphology of the composites was evaluated using scanning electron microscopy and atomic force microscopy.

Work/Family Reconciliation: Corporate Management, Family Policies, and Gender Equality in the Finnish Context

Work/family reconciliation is a crucial question for both personal well-being and on societal level for productivity and re-production throughout the Western world. This thesis examines work/family reconciliation on societal and organisational level in the Finnish context. The study is based on an initial framework, developing it further and analysing the results with help of it. The methodology of the study is plural, including varying epistemological emphasis and both quantitative and qualitative methods. Policy analysis from two different sectors is followed by a survey answered by 113 HR-managers, and then, based on quantitative analyses, interviews in four chosen case companies. The central findings of the thesis are that there indeed are written corporate level policies for reconciling work and family in companies operating in Finland, in spite of the strong state level involvement in creating a policy context in work/family reconciliation. Also, the existing policies vary in accessibility and use. The most frequently used work/family policies still are the statutory state level policies for family leave, taking place when a baby is born and during his or her first years. Still, there are new policies arising, such as a nurse for an employee’s child who has fallen ill, that are based on company activity only, which shows in both accessibility and use of the policy. Reasons for developing corporate level work/family policies vary among the so-called pro-active and re-active companies. In general, family law has a substantial effect for developing corporate level policies. Also headquarter gender equality strategies as well as employee demands are important. In regression analyses, it was found that corporate image and importance in recruitment are the foremost reasons for companies to develop policies, not for example the amount of female employees in the company. The reasons for policy development can be summarized into normative pressures, coercive pressures and mimetic pressures, in line with findings from institutional theory. This research, however, includes awareness of different stakeholder interests and recognizes that institutional theory needs to be complemented with notions of gender and family, which seem to play a part in perceived work/family conflict and need for further work/family policies both in managers’ personal lives and on the organisational level. A very central finding, demanding more attention, is the by HR managers perceived change in values towards work and commitment towards organisation at the youngest working generation, Generation Y. This combined with the need for key personnel has brought new challenges to companies especially in knowledge business and will presumably lead to further development of flexible practices in organisations. The accessibility to this flexibility seems to, however, be even more dependent on the specific knowledge and skills of the employee. How this generation will change the organisations remains to be seen in further research.

Stability of the viscous flow of a fluid through a flexible tube

The stability of the Hagen-Poiseuille flow of a Newtonian fluid in a tube of radius R surrounded by an incompressible viscoelastic medium of radius R < r < HR is analysed in the high Reynolds number regime. The dimensionless numbers that affect the fluid flow are the Reynolds number Re = (rho VR/eta), the ratio of the viscosities of the wall and fluid eta(r) = (eta(s)/eta), the ratio of radii H and the dimensionless velocity Gamma = (rho V-2/G)(1/2). Here rho is the density of the fluid, G is the coefficient of elasticity of the wall and V is the maximum fluid velocity at the centre of the tube. In the high Reynolds number regime, an asymptotic expansion in the small parameter epsilon = (1/Re) is employed. In the leading approximation, the viscous effects are neglected and there is a balance between the inertial stresses in the fluid and the elastic stresses in the medium. There are multiple solutions for the leading-order growth rate s((0)), all of which are imaginary, indicating that the fluctuations are neutrally stable, since there is no viscous dissipation of energy or transfer of energy from the mean flow to the fluctuations due to the Reynolds stress. There is an O(epsilon(1/2)) correction to the growth rate, s((1)), due to the presence of a wall layer of thickness epsilon(1/2)R where the viscous stresses are O(epsilon(1/2)) smaller than the inertial stresses. An energy balance analysis indicates that the transfer of energy from the mean flow to the fluctuations due to the Reynolds stress in the wall layer is exactly cancelled by an opposite transfer of equal magnitude due to the deformation work done at the interface, and there is no net transfer from the mean flow to the fluctuations. Consequently, the fluctuations are stabilized by the viscous dissipation in the wall layer, and the real part of s(1) is negative. However, there are certain values of Gamma and wavenumber k where s((1)) = 0. At these points, the wall layer amplitude becomes zero because the tangential velocity boundary condition is identically satisfied by the inviscid flow solution. The real part of the O(epsilon) correction to the growth rate s((2)) turns out to be negative at these points, indicating a small stabilizing effect due to the dissipation in the bulk of the fluid and the wall material. It is found that the minimum value of s((2)) increases proportional to (H-1)(-2) for (H-1) much less than 1 (thickness of wall much less than the tube radius), and decreases proportional to H-4 for H much greater than 1. The damping rate for the inviscid modes is smaller than that for the viscous wall and centre modes in a rigid tube, which have been determined previously using a singular perturbation analysis. Therefore, these are the most unstable modes in the flow through a flexible tube

Stability of the viscous flow of a fluid through a flexible tube

The stability of Hagen-Poiseuille flow of a Newtonian fluid of viscosity eta in a tube of radius R surrounded by a viscoelastic medium of elasticity G and viscosity eta(s) occupying the annulus R < r < HR is determined using a linear stability analysis. The inertia of the fluid and the medium are neglected, and the mass and momentum conservation equations for the fluid and wall are linear. The only coupling between the mean flow and fluctuations enters via an additional term in the boundary condition for the tangential velocity at the interface, due to the discontinuity in the strain rate in the mean flow at the surface. This additional term is responsible for destabilizing the surface when the mean velocity increases beyond a transition value, and the physical mechanism driving the instability is the transfer of energy from the mean flow to the fluctuations due to the work done by the mean flow at the interface. The transition velocity Gamma(t) for the presence of surface instabilities depends on the wavenumber k and three dimensionless parameters: the ratio of the solid and fluid viscosities eta(r) = (eta(s)/eta), the capillary number Lambda = (T/GR) and the ratio of radii H, where T is the surface tension of the interface. For eta(r) = 0 and Lambda = 0, the transition velocity Gamma(t) diverges in the limits k much less than 1 and k much greater than 1, and has a minimum for finite k. The qualitative behaviour of the transition velocity is the same for Lambda > 0 and eta(r) = 0, though there is an increase in Gamma(t) in the limit k much greater than 1. When the viscosity of the surface is non-zero (eta(r) > 0), however, there is a qualitative change in the Gamma(t) vs. k curves. For eta(r) < 1, the transition velocity Gamma(t) is finite only when k is greater than a minimum value k(min), while perturbations with wavenumber k < k(min) are stable even for Gamma--> infinity. For eta(r) > 1, Gamma(t) is finite only for k(min) < k < k(max), while perturbations with wavenumber k < k(min) or k > k(max) are stable in the limit Gamma--> infinity. As H decreases or eta(r) increases, the difference k(max)- k(min) decreases. At minimum value H = H-min, which is a function of eta(r), the difference k(max)-k(min) = 0, and for H < H-min, perturbations of all wavenumbers are stable even in the limit Gamma--> infinity. The calculations indicate that H-min shows a strong divergence proportional to exp (0.0832 eta(r)(2)) for eta(r) much greater than 1.

Stability of the flow of a fluid through a flexible tube at high Reynolds number

The stability of the Hagen-Poiseuille flow of a Newtonian fluid in a tube of radius R surrounded by an incompressible viscoelastic medium of radius R < r < HR is analysed in the high Reynolds number regime. The dimensionless numbers that affect the fluid flow are the Reynolds number Re = (ρVR / η), the ratio of the viscosities of the wall and fluid ηr = (ηs/η), the ratio of radii H and the dimensionless velocity Γ = (ρV2/G)1/2. Here ρ is the density of the fluid, G is the coefficient of elasticity of the wall and Vis the maximum fluid velocity at the centre of the tube. In the high Reynolds number regime, an asymptotic expansion in the small parameter ε = (1/Re) is employed. In the leading approximation, the viscous effects are neglected and there is a balance between the inertial stresses in the fluid and the elastic stresses in the medium. There are multiple solutions for the leading-order growth rate do), all of which are imaginary, indicating that the fluctuations are neutrally stable, since there is no viscous dissipation of energy or transfer of energy from the mean flow to the fluctruations due to the Reynolds strees. There is an O(ε1/2) correction to the growth rate, s(1), due to the presence of a wall layer of thickness ε1/2R where the viscous stresses are O(ε1/2) smaller than the inertial stresses. An energy balance analysis indicates that the transfer of energy from the mean flow to the fluctuations due to the Reynolds stress in the wall layer is exactly cancelled by an opposite transfer of equal magnitude due to the deformation work done at the interface, and there is no net transfer from the mean flow to the fluctuations. Consequently, the fluctuations are stabilized by the viscous dissipation in the wall layer, and the real part of s(1) is negative. However, there are certain values of Γ and wavenumber k where s(l) = 0. At these points, the wail layer amplitude becomes zero because the tangential velocity boundary condition is identically satisfied by the inviscid flow solution. The real part of the O(ε) correction to the growth rate s(2) turns out to be negative at these points, indicating a small stabilizing effect due to the dissipation in the bulk of the fluid and the wall material. It is found that the minimum value of s(2) increases [is proportional to] (H − 1)−2 for (H − 1) [double less-than sign] 1 (thickness of wall much less than the tube radius), and decreases [is proportional to] (H−4 for H [dbl greater-than sign] 1. The damping rate for the inviscid modes is smaller than that for the viscous wall and centre modes in a rigid tube, which have been determined previously using a singular perturbation analysis. Therefore, these are the most unstable modes in the flow through a flexible tube.

A Compliant Mechanism Kit with Flexible Beams and Connectors

We present the concept, prototypes, and an optimal design method for a compliant mechanism kit as a parallel to the kits available for rigid-body mechanisms. The kit consists of flexible beams and connectors that can be easily hand-assembled using snap fits. It enables users, using their creativity and mechanics intuition, to quickly realize a compliant mechanism. The mechanisms assembled in this manner accurately capture the essential behavior of the topology, shape, size and material aspects and thereby can lead the way for a real compliant mechanism for practical use. Also described in this paper are the design of the connector to which flexible beams can be added in eight different directions; and prototyping of the spring steel connectors as well as beams using wire-cut electro discharge machining. It is noted in this paper that the concept of the kit also resolves a discrepancy in the finite element (FE) modeling of beam-based compliant mechanisms. The discrepancy arises when two or more beams are joining at one point and thus leading to increased stiffness. After resolving this discrepancy, this work extends the topology optimization to automatically generate designs that can be assembled with the kit. Thus, the kit and the accompanying analysis and optimal synthesis procedures comprise a self-contained educational as well as a research and pragmatic toolset for compliant mechanisms. The paper also illustrates how human creativity finds new ways of using the kit beyond the original intended use and how it is useful even for a novice to design compliant mechanisms.

Generalized asymptotic expansions for the wavenumbers in infinite flexible in vacuo orthotropic cylindrical shells

Analytical expressions are found for the wavenumbers and resonance frequencies in flexible, orthotropic shells using the asymptotic methods. These expressions are valid for arbitrary circumferential orders n. The Donnell-Mushtari shell theory is used to model the dynamics of the cylindrical shell. Initially, an in vacuo cylindrical isotropic shell is considered and expressions for all the wavenumbers (bending, near-field bending, longitudinal and torsional) are found. Subsequently, defining a suitable orthotropy parameter epsilon, the problem of wave propagation in an orthotropic shell is posed as a perturbation on the corresponding problem for an isotropic shell. Asymptotic expressions for the wavenumbers in the in vacuo orthotropic shell are then obtained by treating epsilon as an expansion parameter. In both cases (isotropy and orthotropy), a frequency-scaling parameter (eta) and Poisson's ratio (nu) are used to find elegant expansions in the different frequency regimes. The asymptotic expansions are compared with numerical solutions in each of the cases and the match is found to be good. The main contribution of this work lies in the extension of the existing literature by developing closed-form expressions for wavenumbers with arbitrary circumferential orders n in the case of both, isotropic and orthotropic shells. Finally, we present natural frequency expressions in finite shells (isotropic and orthotropic) for the axisymmetric mode and compare them with numerical and ANSYS results. Here also, the comparison is found to be good. (C) 2011 Elsevier Ltd. All rights reserved.