Produção de cerveja, utilizando méis de diferentes origens botânicas como adjuntos

This study aimed to produce beer, using different botanical origins of honeys (orange, eucalyptus and wild), as malt adjuncts, and their Physical-chemical and sensorial characterizations. The production was made with malt, water, hops and honey. All musts were adjusted to 12 Brix, and the concentration of honey in the formulation was 45% (based on the extract), except for the control (0%). The physical and chemical analysis were performed on malt (extract content), honey (pH, free acidity, lactonic acidity, total acidity, color, turbidity, extract content, moisture content, reducing sugar, total reducing sugar and sucrose) in wort (content extract, pH, color, turbidity, fermentability ,bitterness and total acidity) and beer apparent extract, apparent fermentability, real extract, real fermentability, alcohol content, pH, total acidity, total foam, foam density , bitterness, carbon dioxide, color and turbidity). Sensory analysis was performed by nine-points hedonic scale testing. The attributes evaluated were appearance, aroma, flavor and overall. The results were submitted to ANOVA and means compared by Tukey testing at a 5% of probability. Beer with honey as adjuncts’ had high fermentability and low content of fat, compared to the pure malt beer. The addition of honey as an adjunct did not affect the majority of the physical-chemical parameters, except for turbidity, whereas beer with honey showed the highest value for this feature, in addition, it has also presented their biterness differences the values for beer with honey were lower. The different types of honeys did not affect the acceptability of beer, however, the beer with honey showed greater acceptance between beer with malt and honey

Tratamento de água pluvial para fins não potáveis com utilização de amido de milho como coagulante em filtração cíclica em escala de laboratório

The aim of the present work is to investigate a simplified rainwater treatment strategy for nonpotable use. For this, there were simulated in laboratory scale the treatment conditions of a system that employs Corn Starch as a coagulant in cyclic filtration (from 1 to 5 filtration cycles). A commercial Corn Starch in different dosages was used (0,1; 0,2; 0,4; 0,6; 0,8; 1,0; 1,5; 2,0; 2,5; 3,0; 3,5; 4,0; 4,5; 5,0; 5,5; 6,0; 6,5; 7,0; 7,5; 8,0; 8,5 e 9,0 mg/L). The NBR 15527/07 recommended parameters were monitored on the inflow and outflow and compared to different first flushes (0.5; 1.0 and 1.5mm). The obtained results indicate that the 6.0mg/L dosage presented the best results (removal efficiency of 86% of turbidity; 88% of apparent color and absent of total and faecal coliform residuals). However, it was not possible to prove the filtration cycles benefit, in laboratory scale, because for some Corn Starch dosages the water did not present better quality when increasing the number of cycles.

Avaliação do desempenho de uma unidade em escala real para tratamento de água pluvial empregando a filtração direta por meio de filtro de pressão e amido natural de milho como coagulante primário

The aim of this study was to investigate the performance of an experimental rainwater treatment system for non-potable uses. Without the first-flush discharge it was expected to control the quality of captured rainwater and to minimize the rainwater by-pass caused by the first-flush strategy. A full-scale direct filtration unit was operated and a solution of natural corn starch was used as the primary coagulant. The color, turbidity e coliform efficiencies of the unit was analyzed based on filtration loads and the net water production was estimated. The results pointed out turbidity removal up to 70.8% and color removal up to 61.0%. The backwash of the filtering system was completed in 3 minutes at the rate of 1,440 m3/m2day with consumption of treated water from 0.5% to 2.2%, based on the potentially harvesting.

Análise energética de cerveja eleborada com mel

The objective of this study was to characterize energetically beersmade withhoney. The tests of beer production weremade withninetreatments,threecombination of the originalextract concentrations (11, 13and 15 °Brix) and threepercentagesof honeyin the wort formulation(0, 20 and 40%).The experimentwas completely randomizedwith two replications, totaling eighteenplots.Themashingprocesswas performed byinfusion, with honey added in the boiling step. After clarified, the wort had its extract contents corrected with the addition of filtered water and was inoculated withlowfermentation yeast .The fermentation occurred at 10 ° C. The beer was manually bottled and stored in a freezer at 0 °C for 15 days, formaturation. The beers were chemically analyzed on proximate composition (moisture, protein, lipid, ash, and carbohydrate), alcohol content (% m / m) and then calculated the energy value. The results ofchemical analysis andenergetic valuesof the beerswere subjected to analysisof variance (F test) and the means werecompared byTukey testat 5% probability. The commonbeershad the lowestenergy value (31.05 to 31.95 kcal100g-1) in relation toextra(36.42 to 38.42 kcal100g-1) and strong(38.20 to 40.17 kcal100g-1) beers. Theincrease in the original extractin beerraises theircaloric values. The presenceof honeyin the formulationincreasedthe energetic valuesincommon andextrabeersand decreasedin strong.The levelsof alcohol andcarbohydratewere predominant in thebeer energetic values,beingpossible to observeadirect relation amongthese components ofbeer and theircaloric value.

Tratamento de água de reservatórios por dupla filtração, oxidação e adsorção em carvão ativado granular

Este trabalho teve como objetivo avaliar o tratamento de água bruta proveniente de um reservatório de água, utilizando instalação piloto de dupla filtração (DF), composta por filtro ascendente de pedregulho (FAP) e filtro rápido descendente de areia (FRD), seguida de uma unidade de pós-tratamento com carvão ativado granular (CAG). Adicionalmente, foi verificado o efeito da pré e interoxidação (entre o FAP e o FRD) na eficiência global do tratamento e na formação de subprodutos orgânicos halogenados (SOH). Em função dos resultados obtidos, foi observado que a pré-oxidação melhorou a qualidade do efluente do FAP e a interoxidação favoreceu que resultassem valores menores de turbidez e cor no efluente do FRD. O processo de tratamento por adsorção em carvão ativado granular, utilizado como pós-tratamento, mostrou-se eficiente para assegurar a qualidade dos efluentes finais nos ensaios realizados, especialmente, em relação à remoção de matéria orgânica, cianobactérias e cor. As concentrações máximas de SOH encontrados nos efluentes do FRD e do FCAG não ultrapassaram os valores limites da Portaria nº 2.914/2011 do Ministério da Saúde.