Testing hypotheses in the Birnbaum-Saunders distribution under type-II censored samples

The two-parameter Birnbaum-Saunders distribution has been used successfully to model fatigue failure times. Although censoring is typical in reliability and survival studies, little work has been published on the analysis of censored data for this distribution. In this paper, we address the issue of performing testing inference on the two parameters of the Birnbaum-Saunders distribution under type-II right censored samples. The likelihood ratio statistic and a recently proposed statistic, the gradient statistic, provide a convenient framework for statistical inference in such a case, since they do not require to obtain, estimate or invert an information matrix, which is an advantage in problems involving censored data. An extensive Monte Carlo simulation study is carried out in order to investigate and compare the finite sample performance of the likelihood ratio and the gradient tests. Our numerical results show evidence that the gradient test should be preferred. Further, we also consider the generalized Birnbaum-Saunders distribution under type-II right censored samples and present some Monte Carlo simulations for testing the parameters in this class of models using the likelihood ratio and gradient tests. Three empirical applications are presented. (C) 2011 Elsevier B.V. All rights reserved.

Assessment of cognitive function in heart failure patients

Background
Research on the cognitive capacity of heart failure patients is limited, with a paucity of benchmark information available for this population. It is highly likely that cognitive deficits affect patients' understanding of disease and treatment requirements, as well as limiting their functional capacity and ability to implement treatment plans, and undertake self-care.

Aims
The purpose of this study was to establish a comprehensive neurocognitive profile of the heart failure patient through systematic neurocognitive assessment and to determine whether an association existed between severity of heart failure and cognitive abilities.

Methods
Thirty-eight patients were recruited from the heart failure patient databases of two metropolitan hospitals in Melbourne, Australia. Participants were individually assessed using four standardised, internationally recognised neuropsychological tests that examined current and premorbid intelligence, memory and executive functioning.

Results
Although there was no significant decline from premorbid general intellectual function, other specific areas of deficit, including impaired memory and executive functioning, were identified. There were no significant correlations between heart failure severity and the neurocognitive measures used.

Conclusion
The results support the need to recognise cognitive impairment in people with heart failure and to develop an abbreviated method of assessing cognitive function that can be easily implemented in the clinical setting. Identifying cognitive deficits in this population will be useful in guiding the content and nature of treatment plans to maximise adherence and minimise worsening of heart failure symptoms.

Slip during tension testing of Mg-3A1-1Zn sheet

The activation of slip and twinning deformation modes in Mg-3Al-1Zn alloy was investigated by means of both in-situ and ex-situ methods at ambient temperature using electron back scattering diffraction (EBSD). The results confirm the importance of non-basal slip and c-axis compression double twinning. During tensile deformation of rolled sheet, 63% of the observed slip traces were ascribed to prismatic slip, 33% to basal slip and 4% to <c+a> slip. Prismatic slip was frequently observed in grain interiors. The density of twinning was quantified in samples tested along transverse, extrusion and rolling directions at failure. The values in the range of 0.02-0.18 twins per square micron were found depending on sample orientation. The results show the effect of twinning on failure.

Necking and failure at low strains in a coarse-grained wrought Mg alloy

Tensile testing of rolled AZ31 alloy with a mean grain size of 80 μm reveals localization and failure prior to diffuse necking. Optical microscopy reveals that failure is caused by voids that have formed within twins. A simple localization criterion is proposed that captures the role of grain size in the effect. Such early failure is only predicted for coarse grain sizes, in line with observation.

Effect of structure-property relationships on fatigue failure in natural fibres

The fatigue behaviour of natural fibres is important for fibre processing efficiency as well as the properties and performance of products made from these fibres. This chapter presents some fibre fatigue results obtained from various experimental methods and testing conditions. It demonstrates that many factors, including fibre structure and chemical treatments, affect the fatigue failure in natural fibres. Examples of controlling fibre fatigue life for different purposes are also presented. Knowledge of the fatigue behaviour of natural fibres will help product design and care.

Comparing methods for prescribing exercise for individuals with chronic heart failure

This study examined the accuracy of current recommended guidelines for prescribing exercise intensity using the methods of percentage of heart rate reserve (%HRR), percentage of VO₂ peak (%VO₂peak) and percentage of VO₂ reserve (%VO₂R) in a clinical population of chronic heart failure (CHF) patients. The precision of prescription of exercise intensity for 45 patients with stable CHF (39:6 M:F, 65±9 yrs (mean±SD)) was investigated. VO₂peak testing is relatively common among patients with cardiac disease, but the assessment of VO₂rest is not common practice and the accepted standard value of 3.5 mL/kg/min is assumed in the application of %VO2R (%VO₂R_3.5). In this study, VO₂rest was recorded for 3 min prior to the start of a symptom-limited exercise test on a cycle ergometer. Target exercise intensities were calculated using the VO₂ corresponding to 50 or 80 %HRR, VO₂peak and VO₂R. The VO₂ values were then converted into prescribed speeds on a treadmill in km/hr at 1 %grade using ACSM’s metabolic equation for walking. Target intensities and prescribed treadmill speeds were also calculated with the %VO₂R method using the mean VO₂rest value of participants (3.9 mL/kg/min) (%VO₂R_3.9). This was then compared to the exercise intensities and prescribed treadmill speeds using patient’s measured VO₂rest. Error in prescription correlates the difference between %VO₂R_3.5 and %VO₂R_3.9 compared to %VO₂R with measured VO₂rest. Prescription of exercise intensity through the %HRR method is imprecise for patients on medications that blunt the HR response to exercise. %VO₂R method offers a significant improvement in exercise prescription compared to %VO₂peak. However, a disparity of 10 % still exists in the %VO₂R method using the standard 3.5 mL/kg/min for VO₂rest in the %VO₂R equation. The mean measured VO₂rest in the 45 CHF patients was 11 % higher (3.9±0.8 mL/kg/min) than the standard value provided by ACSM. Applying the mean measured VO₂rest value of 3.9 mL/kg/min rather than the standard assumed value of 3.5 mL/kg/min proved to be closer to the prescribed intensity determined by the actual measured resting VO₂. These results suggest that the %HRR method should not be used to prescribe exercise intensity for CHF patients. Instead, VO₂ should be used to prescribe exercise intensity and be expressed as %VO₂R with measured variables (VO₂rest and VO₂peak).

Moderate-intensity resistance exercise training in patients with chronic heart failure improves strength, endurance, heart rate variability, and forearm blood flow

Thirty-nine CHF patients (New York Heart Association Functional Class = 2.3±0.5; left ventricular ejection fraction 28%±7%; age 65±11 years; 33:6 male:female) underwent 2 identical series of tests, 1 week apart, for strength and endurance of the knee and elbow extensors and flexors, VO_2peak, HRV, FBF at rest, and FBF activated by forearm exercise or limb ischemia. Patients were then randomized to 3 months of resistance training (EX, n = 19), consisting of mainly isokinetic (hydraulic) ergometry, interspersed with rest intervals, or continuance with usual care (CON, n = 20), after which they underwent repeat endpoint testing. Combining all 4 movement patterns, strength increased for EX by 21±30% (mean±SD, P<.01) after training, whereas endurance improved 21±21% (P<.01). Corresponding data for CON remained almost unchanged (strength P<.005, endurance P<.003 EX versus CON). VO_2peak improved in EX by 11±15% (P<.01), whereas it decreased by 10±18% (P<.05) in CON (P<.001 EX versus CON). The ratio of low-frequency to high-frequency spectral power fell after resistance training in EX by 44±53% (P<.01), but was unchanged in CON (P<.05 EX versus CON). FBF increased at rest by 20±32% (P<.01), and when stimulated by submaximal exercise (24±32%, P<.01) or limb ischemia (26±45%, P<.01) in EX, but not in CON (P<.01 EX versus CON).

Circuit resistance training in chronic heart failure improves skeletal muscle mitochondrial ATP production rate—A randomized controlled trial

Background : We aimed to determine the role of skeletal muscle mitochondrial ATP production rate (MAPR) in relation to exercise tolerance after resistance training (RT) in chronic heart failure (CHF).

Methods and Results : Thirteen CHF patients (New York Heart Association functional class 2.3 ± 0.5; Left ventricular ejection fraction 26 ± 8%; age 70 ± 8 years) underwent testing for peak total body oxygen consumption (VO_2peak), and resting vastus lateralis muscle biopsy. Patients were then randomly allocated to 11 weeks of RT (n = 7), or continuance of usual care (C; n = 6), after which testing was repeated. Muscle samples were analyzed for MAPR, metabolic enzyme activity, and capillary density. VO_2peak and MAPR in the presence of the pyruvate and malate (P+M) substrate combination, representing carbohydrate metabolism, increased in RT (P < .05) and decreased in C (P < .05), with a significant difference between groups (VO_2peak, P = .005; MAPR, P = .03). There was a strong correlation between the change in MAPR and the change in peak total body oxygen consumption (VO_2peak) over the study (r = 0.875; P < .0001), the change in MAPR accounting for 70% of the change in VO_2peak.

Conclusions : These findings suggest that mitochondrial ATP production is a major determinant of aerobic capacity in CHF patients and can be favorably altered by muscle strengthening exercise.

'Catastrophic failure' theories and disaster journalism : evaluating media explanations of the Black Saturday bushfires

 In recent decades, academic researchers of natural disasters and emergency management have developed a canonical literature on ‘catastrophe failure’ theories such as disaster responses from US emergency management services (Drabek, 2010; Quarantelli, 1998) and the Three Mile Island nuclear power plant (Perrow, 1999). This article examines six influential theories from this field in an attempt to explore why Victoria’s disaster and emergency management response systems failed during Australia’s Black Saturday bushfires. How well, if at all, are these theories understood by journalists, disaster and emergency management planners, and policy-makers? In examining the Country Fire Authority’s response to the fires, as well as the media’s reportage of them, we use the 2009 Black Saturday bushfires as a theory-testing case study of failures in emergency management, preparation and planning. We conclude that journalists can learn important lessons from academics’ specialist knowledge about disaster and emergency management responses.

Measuring self-care in chronic heart failure : a review of the psychometric properties of clinical instruments

Background : Improved self-care skills and behaviors are an important outcome of patient education and counseling. Both researchers and health professionals need to utilize instruments that are reliable and valid at measuring this outcome to advance our understanding as to the efficacy of clinical practice directed toward improving self-care.

Objective : The aim of this study was to identify instruments that measure chronic heart failure (CHF) self-care and demonstrate their psychometric properties.

Methods : A search of Medline, Cumulative Index to Nursing and Allied Health Literature, Medline, PsycArticles, Psychology and Behavioral Sciences Collection, and PsycINFO databases elucidated studies published between January 1980 and February 2009 that measure CHF self-care. The clinical instruments selected were disease-specific measures of CHF self-care behaviors that are promoted in best practice guidelines. Only instruments that reported estimates of reliability and validity were included in this review. Psychometric properties of the instruments were evaluated according to practice guidelines.

Results : The literature search identified 14 instruments published in peer-reviewed journals that measured constructs that predict or correlate to self-care rather than self-care itself. Only 2 disease-specific measures of self-care were identified (Self-care Heart Failure Index [SCHFI] and European Heart Failure Self-care Behavior Scale [EHFScBS]) that have undergone rigorous psychometric testing in CHF populations. Five aspects of validity had been demonstrated with EHFScBS, and 6 aspects of validity had been demonstrated with SCHFI. Two of 3 aspects of reliability have been demonstrated in both instruments.

Conclusion : Only 2 reliable and valid tools have been developed to specifically measure CHF self-care. Further use of these instruments in the research arena may reduce gaps in our understanding of CHF self-care and further shape clinical practice directed at improving it.

Effect of implant connection and restoration design (screwed vs. cemented) in reliability and failure modes of anterior crowns

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

This study tested the bond strength of a resin cement to a glass-infiltrated zirconia-alumina ceramic after three conditioning methods and using two test methods (shear-SBS versus microtensile-MTBS). Ceramic blocks for MTBS and ceramic disks for SBS were fabricated. Three surface conditioning (SC) methods were evaluated: (1) 110-mu m Al(2)O(3)+Silanization; (2) Chairside silica coating+silanization: (3) Laboratory silica coating+silanization. Following surface conditioning, the resin cement (Panavia F) was bonded to the conditioned ceramics. Although no statistically significant differences (p=0.1076) were seen between the test methods, results yielded with the different surface conditioning methods showed statistically significant differences (p<0.0001) (SC2=SC3>SC1.). As for the interaction between the factors, two-way ANOVA showed that it was not statistically significant (p=0.1443). MTBS test resulted in predominantly mixed failure (85%), but SBS test resulted in exclusively adhesive failure. on the effects of different surface conditioning methods, chairside and laboratory tribochemical silica coating followed by silanization showed higher bond strength results compared to those of aluminum oxide abrasion and silanization, independent of the test method employed.

Antiretroviral resistance mutations in human immunodeficiency virus type 1 infected patients enrolled in genotype testing at the Central Public Health Laboratory, São Paulo, Brazil: preliminary results

Antiretroviral resistance mutations (ARM) are one of the major obstacles for pharmacological human immunodeficiency virus (HIV) suppression. Plasma HIV-1 RNA from 306 patients on antiretroviral therapy with virological failure was analyzed, most of them (60%) exposed to three or more regimens, and 28% of them have started therapy before 1997. The most common regimens in use at the time of genotype testing were AZT/3TC/nelfinavir, 3TC/D4T/nelfinavir and AZT/3TC/efavirenz. The majority of ARM occurred at protease (PR) gene at residue L90 (41%) and V82 (25%); at reverse transcriptase (RT) gene, mutations at residue M184 (V/I) were observed in 64%. One or more thymidine analogue mutations were detected in 73%. The number of ARM at PR gene increased from a mean of four mutations per patient who showed virological failure at the first ARV regimens to six mutations per patient exposed to six or more regimens; similar trend in RT was also observed. No differences in ARM at principal codon to the three drug classes for HIV-1 clades B or F were observed, but some polymorphisms in secondary codons showed significant differences. Strategies to improve the cost effectiveness of drug therapy and to optimize the sequencing and the rescue therapy are the major health priorities.