Substrate/semiconductor interface effects on the emission efficiency of luminescent polymers

The importance of interface effects for organic devices has long been recognized, but getting detailed knowledge of the extent of such effects remains a major challenge because of the difficulty in distinguishing from bulk effects. This paper addresses the interface effects on the emission efficiency of poly(p-phenylene vinylene) (PPV), by producing layer-by-layer (LBL) films of PPV alternated with dodecylbenzenesulfonate. Films with thickness varying from similar to 15 to 225 nm had the structural defects controlled empirically by converting the films at two temperatures, 110 and 230 degrees C, while the optical properties were characterized by using optical absorption, photoluminescence (PL), and photoluminescence excitation spectra. Blueshifts in the absorption and PL spectra for LBL films with less than 25 bilayers (<40-50 nm) pointed to a larger number of PPV segments with low conjugation degree, regardless of the conversion temperature. For these thin films, the mean free-path for diffusion of photoexcited carriers decreased, and energy transfer may have been hampered owing to the low mobility of the excited carriers. The emission efficiency was then found to depend on the concentration of structural defects, i.e., on the conversion temperature. For thick films with more than 25 bilayers, on the other hand, the PL signal did not depend on the PPV conversion temperature. We also checked that the interface effects were not caused by waveguiding properties of the excited light. Overall, the electronic states at the interface were more localized, and this applied to film thickness of up to 40-50 nm. Because this is a typical film thickness in devices, the implication from the findings here is that interface phenomena should be a primary concern for the design of any organic device. (C) 2011 American Institute of Physics. [doi:10.1063/1.3622143]

Intermolecular energy transfer and photostability of luminescence-tuneable multicolour PMMA films doped with lanthanide-beta-diketonate complexes

It is reported in this work the preparation, characterisation and photoluminescence study of poly(methylmethacrylate) (PMMA) thin films co-doped with [Eu(tta)(3)(H(2)O)(2)] and [Tb(acac)(3)(H(2)O)(3)] complexes. Both the composition and excitation wavelength may be tailored to fine-tune the emission properties of these Ln(3+)-beta-diketonate doped polymer films, exhibiting green and red primary colours, as well as intermediate colours. In addition to the ligand-Ln(3+) intramolecular energy transfer, it is observed an unprecedented intermolecular energy transfer process from the (5)D(4) emitting level of the Tb(3+) ion to the excited triplet state T(1) of the tta ligand coordinated to the Eu(3+) ion. The PMMA polymer matrix acts as a co-sensitizer and enhances the overall luminescence intensity of the polymer films. Furthermore, it provides considerable UV protection for the luminescent species and improves the photostability of the doped system.

Quantum yield excitation spectrum (UV-visible) of CdSe/ZnS core-shell quantum dots by thermal lens spectrometry

A recently developed thermal lens spectrometry configuration has been used to study CdSe/ZnS core-shell quantum dots (QDs) suspended in toluene and tetrahydrofuran (THF) solvents. The special features of this configuration make it very attractive to measure fluorescence quantum yield (eta) excitation spectrum since it simplifies the measurement procedure and consequently improve the accuracy. Furthermore, the precision reached is much higher than in conventional photoluminescence (PL) technique. Two methods, called reference sample and multiwavelength have been applied to determine eta, varying excitation wavelength in the UV-visible region (between 335-543 nm). The eta and PL spectra are practically independent of the excitation wavelength. For CdSe/ZnS QDs suspended in toluene we have obtained eta=76 +/- 2%. In addition, the aging effect on eta and PL has been studied over a 200 h period for QDs suspended in THF. (C) 2010 American Institute of Physics. [doi:10.1063/1.3343517]

The electronic states of SeF: A reinterpretation of the chemiluminescent emission of the reaction of selenium with fluorine

The low-lying doublet and quartet electronic states of the species SeF correlating with the first dissociation channel are investigated theoretically at a high-level of electronic correlation treatment, namely, the complete active space self-consistent field/multireference single and double excitations configuration interaction (CASSCF/MRSDCI) using a quintuple-zeta quality basis set including a relativistic effective core potential for the selenium atom. Potential energy curves for (Lambda+S) states and the corresponding spectroscopic properties are derived that allows for an unambiguous assignment of the only spectrum known experimentally as due to a spin-forbidden X (2)Pi-a (4)Sigma(-) transition, and not a A (2)Pi-X (2)Pi transition as assumed so far. For the bound excited doublets, yet unknown experimentally, this study is the first theoretical characterization of their spectroscopic properties. Also the spin-orbit coupling constant function for the X (2)Pi state is derived as well as the spin-orbit coupling matrix element between the X (2)Pi and a (4)Sigma(-) states. Dipole moment functions and vibrationally averaged dipole moments show SeF to be a very polar species. An overview of the lowest-lying spin-orbit (Omega) states completes this description. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3426315]

Polymer matrix sensitizing effect on photoluminescence properties of Eu(3+)-beta-diketonate complex doped into poly-beta-hydroxybutyrate (PHB) in film form

In this work is reported the sensitization effect by polymer matrices on the photoluminescence properties of diaquatris(thenoyltrifluoroacetonate)europium(III), [Eu(tta)(3)(H(2)O)(2)], doped into poly-beta-hydroxybutyrate (PHB) with doping percentage at 1, 3, 5, 7 and 10% (mass) in film form. TGA results indicated that the Eu(3+) complex precursor was immobilized in the polymer matrix by the interaction between the Eu(3+) complex and the oxygen atoms of the PHB polymer when the rare earth complex was incorporated in the polymeric host. The thermal behaviour of these luminescent systems is similar to that of the undoped polymer, however, the T(onset) temperature of decomposition decreases with increase of the complex doping concentration. The emission spectra of the Eu(3+) complex doped PHB films recorded at 298 K exhibited the five characteristic bands arising from the (5)D(0) -> (7)F(J) intraconfigurational transitions (J = 0-4). The fact that the quantum efficiencies eta of the doped film increased significantly revealed that the polymer matrix acts as an efficient co-sensitizer for Eu(3+) luminescent centres and therefore enhances the quantum efficiency of the emitter (5)D(0) level. The luminescence intensity decreases, however, with increasing precursor concentration in the doped polymer to greater than 5% where a saturation effect is observed at this specific doping percentage, indicating that changes in the polymeric matrix improve the absorption property of the film, consequently quenching the luminescent effect.

Evaluation of the use of multiple lines for determination of metals in water by inductively coupled plasma optical emission spectrometry with axial viewing

Inductively coupled plasma optical emission spectrometers (ICP DES) allow fast simultaneous measurements of several spectral lines for multiple elements. The combination of signal intensities of two or more emission lines for each element may bring such advantages as improvement of the precision, the minimization of systematic errors caused by spectral interferences and matrix effects. In this work, signal intensities for several spectral lines were combined for the determination of Al, Cd, Co, Cr, Mn, Pb, and Zn in water. Afterwards, parameters for evaluation of the calibration model were calculated to select the combination of emission lines leading to the best accuracy (lowest values of PRESS-Predicted error sum of squares and RMSEP-Root means square error of prediction). Limits of detection (LOD) obtained using multiple lines were 7.1, 0.5, 4.4, 0.042, 3.3, 28 and 6.7 mu g L(-1) (n = 10) for Al, Cd. Co, Cr, Mn, Pb and Zn, respectively, in the presence of concomitants. On the other hand, the LOD established for the most intense emission line were 16. 0.7, 8.4, 0.074. 23, 26 and 9.6 mu g L(-1) (n = 10) for these same elements in the presence of concomitants. The accuracy of the developed procedure was demonstrated using water certified reference material. The use of multiple lines improved the sensitivity making feasible the determination of these analytes according to the target values required for the current environmental legislation for water samples and it was also demonstrated that measurements in multiple lines can also be employed as a tool to verify the accuracy of an analytical procedure in ICP DES. (C) 2009 Elsevier B.V. All rights reserved.

TL and OSL properties of KAlSi(3)O(8):Mn, obtained by sol-gel process

Thermoluminescence (TL) and Optically Stimulated Luminescence (OSL) properties of KAlSi(3)O(8):Mn glasses obtained through the sol gel technique were investigated. Samples were obtained with five different molar concentrations of 0.25, 0.5, 1, 2 and 5 mol% of manganese. Transmission Electronic Microscopy (TEM) indicated the occurrence of nanoparticles composed by glass matrix elements with Mn. Best results for TL response were obtained with 0.5 mol% Mn doped sample, which exhibits a TL peak at 180 degrees C. The TL spectrum of this sample presents a broad emission band from 450 to 700 nm with a peak at 575 nm approximately. The emission band fits very well with the characteristic lines of the Mn(2+) emission features. According to this fact, the band at 410 nm can be ascribed to (6)A(1)(S) -> (4)A(1)(G), (4)E(G) transition, while the 545 nm band can be attributed to the superposition of the transitions (6)A(1)(S) -> (4)T(2)(G) and (6)A(1)(S) -> (4)T(1)(G). The dependence of the TL response with the energy of X-rays (27-41 keV) showed a small decrease of the TL intensity in the high energy region. Excitation with blue LEDs showed OSL in the UV region with a fast decay component. (C) 2011 Elsevier Ltd. All rights reserved.

Effect of polymeric matrix on morphology and photoelectric properties of polymer-quantum dots nanocomposites

Recently, CdTe semiconductor quantum dots (QDs) have attracted great interest due to their unique properties [1]. Their dispersion into polymeric matrices would be very for several optoelectronics applications. Despite its importance, there has been relatively little work done on charge transport in the QD polymeric films [2], which is mainly affected by their structural and morphological properties. In the present work, polymer-quantum dot nanocomposites films based on optically transparent polymers in the visible spectral range and CdTe QDs with controlled particle size and emission wavelength, were prepared via solvent casting. Photoluminescent (PL) measurements indicate different emission intensity of the nanocomposites. A blue shift of the emission peak compared to that of QDs in solution occurred, which is attributed to the QDs environment changes. The morphological and structural properties of the CdTe nanocomposites were evaluated. Since better QDs dispersion was achieved, PMMA seemed to be the most promising matrix. Electrical properties measurements indicate an ohmic behavior.

Effect of acid or alkaline catalyst and of different capping agents on the optical properties of CdS nanoparticles incorporated within a diureasil hybrid matrix

CdS nanoparticles (NPs) were synthesized using colloidal methods and incorporated within a diureasil hybrid matrix. The surface capping of the CdS NPs by 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) organic ligands during the incorporation of the NPs within the hybrid matrix has been investigated. The matrix is based on poly(ethylene oxide)/poly(propylene oxide) chains grafted to a siliceous skeleton through urea bonds and was produced by sol–gel process. Both alkaline and acidic catalysis of the sol–gel reaction were used to evaluate the effect of each organic ligand on the optical properties of the CdS NPs. The hybrid materials were characterized by absorption, steady-state and time-resolved photoluminescence spectroscopy and High Resolution Transmission Electron Microscopy (HR-TEM). The preservation of the optical properties of the CdS NPs within the diureasil hybrids was dependent on the experimental conditions used. Both organic ligands (APTMS and MPTMS) demonstrated to be crucial in avoiding the increase of size distribution and clustering of the NPs within the hybrid matrix. The use of organic ligands was also shown to influence the level of interaction between the hybrid host and the CdS NPs. The CdS NPs showed large Stokes shifts and long average lifetimes, both in colloidal solution and in the xerogels, due to the origin of the PL emission in surface states. The CdS NPs capped with MPTMS have lower PL lifetimes compared to the other xerogel samples but still larger than the CdS NPs in the original colloidal solution. An increase in PL lifetimes of the NPs after their incorporation within the hybrid matrix is related to interaction between the NPs and the hybrid host matrix.

New human kallikrein 14: enzymatic characterization and inhibitors development.

RESUME DESTINE A UN LARGE PUBLIC En biologie, si une découverte permet de répondre à quelques questions, en général elle en engendre beaucoup d'autres. C'est ce qui s'est produit récemment dans le monde des kallicréines. De la famille des protéases, protéines ayant la faculté de couper plus ou moins spécifiquement d'autres protéines pour exercer un rôle biologique, la famille des kallicréines humaines n'était composée que de 3 membres lors du siècle dernier. Parmi eux, une kallicréine mondialement utilisée pour détecter le cancer de la prostate, le PSA. En 2000, un chercheur de l'hôpital universitaire Mont Sinaï à Toronto, le Professeur Eleftherios Diamandis, a découvert la présence de 12 nouveaux gènes appartenant à cette famille, situés sur le même chromosome que les 3 premières kallicréines. Cette découverte majeure a placé les spécialistes des kallicréines face à une montagne d'interrogations car les fonctions de ces nouvelles protéases étaient totalement inconnues. La kallicréine humaine 14 (hK14) présente un intérêt particulier, car elle se retrouve associée à différents cancers, notamment les carcinomes ovariens et mammaires. Cette association ne répond cependant pas à la fonction de cette protéase. L'objectif de ce travail de thèse était donc de découvrir, dans un premier temps, la spécificité de cette nouvelle kallicréine, c'est-à-dire le type de coupure qu'elle engendre au niveau des protéines qu'elle cible. Utilisant une technologie de pointe qui exploite la propriété des bactériophages à se répliquer dans les bactéries à l'infini, des dizaines de millions de combinaisons protéiques aléatoires ont été présentées à hK14, qui a pu sélectionner celles qui lui étaient favorables pour la coupure. Cette technique qualitative porte le nom de Phage Display Substrate. Une fois la sélection réalisée, il fallait transférer ces séquences coupées ou substrats dans un système permettant de donner une valeur quantitative à l'efficacité de coupure. Pour cela nous avons développé une technologie qui permet d'évaluer cette efficacité en utilisant des protéines fluorescentes de méduse, modifiées génétiquement, dont l'excitation de la première (CFP : cyan fluorescent protein) par la lumière à une certaine longue d'onde permet le transfert d'énergie à la seconde (YFP : yellow fluorescent protein), via un substrat qui les lie. Pour que ce transfert d'énergie se produise, il faut que les deux protéines fluorescentes soient proches, comme c'est le cas lorsqu'elles sont liées par un substrat. La coupure de ce lien provoque un changement de transfert d'énergie qui est quantifiable en utilisant un spectrofluoromètre. Cette technologie permet donc de suivre la réaction d'hydrolyse (coupure) des protéases. Afin de poursuivre certaines expériences permettant de mieux comprendre la fonction biologique d'hK14 ainsi que son éventuelle implication dans le cancer, nous avons développé des inhibiteurs spécifiques d'hK14. Les séquences qui on été le plus efficacement coupées par hK14 ont été utilisées pour transformer deux types d'inhibiteurs classiques, qui circulent dans notre sang, en inhibiteurs d'hK14 hautement efficaces et spécifiques. Selon les résultats obtenus in vitro, ils pourront être évalués in vivo en tant que traitement potentiel contre le cancer. RESUME Les protéases sont des enzymes impliquées dans des processus physiologiques mais aussi parfois pathologiques. La famille des kallicréines tissulaires humaines représente le plus grand groupe de protéases humaines, dont plusieurs pourraient participer au développement de certaines maladies. D'autre part, ces protéases sont apparues comme des marqueurs de pathogénicité potentiels, notamment dans les cas de cancers hormono-dépendants. La kallicréine humaine 14 a été récemment découverte et son implication dans quelques maladies, particulièrement dans le cas de tumeurs, semble probable. En effet, son expression génique est augmentée au niveau des tissus cancéreux de la prostate et du sein et son expression protéique s'est révélée plus élevée dans le sérum de patientes atteintes d'un cancer du sein ou des ovaires. Cependant, comme c'est le cas pour la plupart des kallicréines, sa fonction est encore inconnue. Afin de mieux connaître son rôle biologique et/ou pathologique, nous avons décidé de caractériser son activité enzymatique. Nous avons tout d'abord mis au point un système de substrats entièrement biologique permettant d'étudier in vitro l'activité des protéases. Ce système est basé sur le phénomène de FRET, à savoir le transfert d'énergie de résonance fluorescente qui intervient entre deux molécules fluorescentes voisines si le spectre d'émission de la protéine donneuse chevauche le spectre d'excitation de la protéine receveuse. Nous avons fusionné de manière covalente une protéine fluorescente bleue (CFP) et une jaune (YFP) en les liant avec diverses séquences. Par clivage de la séquence de liaison, une perte du transfert d'énergie peut être mesurée par un spectrofluoromètre. Cette technologie représente un moyen facile de suivre la réaction d'hydrolyse des protéases. Les conditions optimales de production de ces substrats CFP-YFP ont été déterminées, de même que les paramètres pouvant éventuellement influencer le FRET. Ce système possède une grande résistance à la protéolyse non spécifique et est applicable à un grand nombre de protéase. Contrairement aux substrats fluorogéniques, il permet d'étudier les acides aminés se trouvant des deux côtés du site de clivage. Ce système étant entièrement biologique, il est le reflet des interactions protéine-protéine et représente un outil biologique facile, bon marché et rapide pour caractériser les protéases. Dans un premier temps, hK14 a été mise en présence d' une banque de haute diversité de pentapeptides aléatoires présentée à la surface de phages afin d'identifier des substrats spécifiques. Ensuite, le système CFP-YFP a été employé pour trier les peptides sélectionnés afin d'identifier les séquences de substrats les plus sensibles et spécifiques pour hK14. Nous avons montré, qu'en plus de sa prévisible activité de type trypsine, hK14 possède aussi une très surprenante activité de type chymotrypsine. Les séquences les plus sensibles ont été choisies pour cribler la banque de donnée Swissprot, permettant ainsi l'identification de 6 substrats protéiques humains potentiels pour hK14. Trois d'entre eux, la laminine α-5, le collagène IV et la matriline-4, qui sont des composants de la matrice extracellulaire, ont démontré une grande susceptibilité à l'hydrolyse par hK14. De plus, la séparation éléctrophorétique a montré que la dégradation de la laminine α-5 et de la matriline-4 par hK14 devait se produire aux sites identifiés par la technologie du phage display. Pour terminer, nous avons transformé, par mutagenèse dirigée, deux serpines (inhibiteurs de protéases de type sérine) connues, AAT et ACT (alpha anti-trypsine et alpha anti-chymotrypsine), qui inhibent un vaste éventail d'enzymes humaines en inhibiteurs d'hK14 hautement efficaces et spécifiques. Ces inhibiteurs pourront être utilisés d'une part pour poursuivre certaines expériences permettant de mieux comprendre l'implication d'hK14 dans des voies physiologiques ou dans le cancer et d'autre part pour les évaluer in vivo en tant que traitement potentiel contre le cancer. SUMMARY Proteases consist of enzymes involved in physiological events, but also, in case of dysregulation, in pathogenicity. The human tissue kallikrein family represents the largest human protease cluster and includes several members that either could participate in the course of certain diseases or emerged as potential biological markers, especially in hormone dependent cancers. The human kallikrein 14 has been recently discovered and suggested implications in some disorders, particularly in tumors since its gene expression is up-regulated in prostate and breast cancer tissues and its protein expression increased in the serum of patients with breast and ovarian cancers. However, like most kallikreins, its function remains unknown. To better understand hK14 biological and/or pathological role, we decided to characterize its enzymatic activity. First of all, we developped a biological system suitable for in vitro study of protease activity. This system is based on the so-called FRET phenomenon, that is the Fluorescence Resonance Energy Transfer that occurs between two nearby fluorescent proteins if the emission spectrum of the donor overlaps the excitation spectrum of the acceptor. We fused covalently a cyan fluorescent protein (CFP) and a yellow fluorescent protein (YFP) with diverses sequences. Upon cleavage of the linker sequence by protease, the loss of energy transfer can be measured by a spectrofluorometer allowing an easy following of hydrolysis reaction. The optimal conditions to produce in bacterial system these CFP-YFP substrates were determined as well as the parameters that could eventually influence the FRET. This system demonstrated a high degree of resistance to non-specific proteolysis and applicability to various conditions corresponding to a great number of existing proteases. Other avantages are the possibility to study the amino acids located both sides of the cleavage site as well as the interest to work in a full biological system reflecting protein-protein interaction. A phage substrate library with exhaustive diversity was used prior to CFP-substrate-YFP system to isolate specific human kallikrein 14 substrates. After that the CFP-YFP system was used to sort peptides and identify highly sensitive and specific substrate sequences for hK14. We showed that besides its predictable trypsin-like activity, hK14 also possesses a surprising chymotrypsin-like activity. The screening of the Swissprot database was achieved with the most sensitive sequences and allowed the identification of 6 potential human protein substrates for hK14. Three of them, laminin α-5, collagen IV and matrilin-4, which are components of the extracellular matrix were incubated with hK14, by which they were efficiently hydrolyzed. Moreover, electrophoretic separation revealed that degradation of laminin α-5 and matrilin-4 by hK14 generated fragments with identical molecular size than the predicted N-terminal fragments that would result from hK14 specific cleavage, proving the value of phage display substrate to identify potential substrates. Finally, with site-directed mutagenesis, we transformed two well-known serpins (serine protease inhibitors), AAT and ACT (alpha anti-trypsin and alpha anti-chymotrypsin), which inhibit a vast spectrum of human enzymes into highly efficient and specific hK14 inhibitors. These inhibitors will be used to pursue experiments that could help understand hK14 implication in physiological pathways as well as in cancer biology and also to perform their in vivo evalution as potential cancer treatment.

Electron capture and emission by the Ti acceptor level in GaP

Previously reported results on deep level optical spectroscopy, optical absorption, deep level transient spectroscopy, photoluminescence excitation, and time resolved photoluminescence are reviewed and discussed in order to know which are the mechanisms involved in electron capture and emission of the Ti acceptor level in GaP. First, the analysis indicates that the 3T1(F) crystal¿field excited state is not in resonance with the conduction band states. Second, it is shown that both the 3T2 and 3T1(F) excited states do not play any significant role in the process of electron emission and capture.

Efficient energy transfer from Si clusters to Er3+ in complex silicate glasses

We present an extensive study of the structural and optical emission properties in aluminum silicates and soda-lime silicates codoped with Si nanoclusters (Si-nc) and Er. Si excess of 5 and 15¿at.¿% and Er concentrations ranging from 2×1019 up to 6×1020¿cm¿3 were introduced by ion implantation. Thermal treatments at different temperatures were carried out before and after Er implantation. Structural characterization of the resulting structures was performed to obtain the layer composition and the size distribution of Si clusters. A comprehensive study has been carried out of the light emission as a function of the matrix characteristics, Si and Er contents, excitation wavelength, and power. Er emission at 1540¿nm has been detected in all coimplanted glasses, with similar intensities. We estimated lifetimes ranging from 2.5¿to¿12¿ms (depending on the Er dose and Si excess) and an effective excitation cross section of about 1×10¿17¿cm2 at low fluxes that decreases at high pump power. By quantifying the amount of Er ions excited through Si-nc we find a fraction of 10% of the total Er concentration. Upconversion coefficients of about 3×10¿18¿cm¿3¿s¿1 have been found for soda-lime glasses and one order of magnitude lower in aluminum silicates.

Bipolar pulsed excitation of erbium-doped nanosilicon light emitting diodes

High quantum efficiency erbium doped silicon nanocluster (Si-NC:Er) light emitting diodes (LEDs) were grown by low-pressure chemical vapor deposition (LPCVD) in a complementary metal-oxide-semiconductor (CMOS) line. Erbium (Er) excitation mechanisms under direct current (DC) and bipolar pulsed electrical injection were studied in a broad range of excitation voltages and frequencies. Under DC excitation, Fowler-Nordheim tunneling of electrons is mediated by Er-related trap states and electroluminescence originates from impact excitation of Er ions. When the bipolar pulsed electrical injection is used, the electron transport and Er excitation mechanism change. Sequential injection of electrons and holes into silicon nanoclusters takes place and nonradiative energy transfer to Er ions is observed. This mechanism occurs in a range of lower driving voltages than those observed in DC and injection frequencies higher than the Er emission rate.

Silicon nanocluster sensitization of erbium ions under low-energy optical excitation

The sensitizing action of amorphous silicon nanoclusters on erbium ions in thin silica films has been studied under low-energy (long wavelength) optical excitation. Profound differences in fast visible and infrared emission dynamics have been found with respect to the high-energy (shortwavelength) case. These findings point out to a strong dependence of the energy transfer process on the optical excitation energy. Total inhibition of energy transfer to erbium states higher than thefirst excited state (4I13/2) has been demonstrated for excitation energy below 1.82 eV (excitation wavelength longer than 680 nm). Direct excitation of erbium ions to the first excited state (4I13/2)has been confirmed to be the dominant energy transfer mechanism over the whole spectral range of optical excitation used (540 nm¿680 nm).

Polarization strategies to improve the emission of a Si-based light source emitting at 1.55 um

We present a electroluminescence (EL) study of the Si-rich silicon oxide (SRSO) LEDs with and without Er3+ ions under different polarization schemes: direct current (DC) and pulsed voltage (PV). The power efficiency of the devices and their main optical limitations are presented. We show that under PV polarization scheme, the devices achieve one order of magnitude superior performance in comparison with DC. Time-resolved measurements have shown that this enhancement is met only for active layers in which annealing temperature is high enough (>1000 ◦C) for silicon nanocrystal (Si-nc) formation. Modeling of the system with rate equations has been done and excitation cross-sections for both Si-nc and Er3+ ions have been extracted.