A model for evaluation of generic competences in engineering: application to the problem. Solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

A model for evaluation of generic competences in engineering: application to the problem-solving competence at UPM.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help teachers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with a two-fold objective: a) To develop a model for teaching and evaluating core competences that is useful and easily applicable to its different degrees, and b) to provide support to teachers by creating an area within the Website for Educational Innovation where they can search for information on the model corresponding to each core competence approved by UPM. Information available on each competence includes its definition, the formulation of indicators providing evidence on the level of acquisition, the recommended teaching and evaluation methodology, examples of evaluation rules for the different levels of competence acquisition, and descriptions of best practices. These best practices correspond to pilot tests applied to several of the academic subjects conducted at UPM in order to validate the model. This work describes the general procedure that was used and presents the model developed specifically for the problem-solving competence. Some of the pilot experiences are also summarised and their results analysed

Survey on integration of Applied Geology and Geomorphology in Civil Engineering curricula in the framework of the European Higher Education Area (EHEA) by using practical trips

The engineer must have sufficient theoretical knowledge to be applied to solve specific problems, with the necessary capacity to simplify these approaches, and taking into account factors such as speed, simplicity, quality and economy. In Geology, its ultimate goal is the exploration of the history of the geological events through observation, deduction, reasoning and, in exceptional cases by the direct underground exploration or experimentation. Experimentation is very limited in Geology. Reproduction laboratory of certain phenomena or geological processes is difficult because both time and space become a large scale. For this reason, some Earth Sciences are in a nearly descriptive stage whereas others closest to the experimental, Geophysics and Geochemistry, have assimilated progress experienced by the physics and chemistry. Thus, Anglo-Saxon countries clearly separate Engineering Geology from Geological Engineering, i.e. Applied Geology to the Geological Engineering concepts. Although there is a big professional overlap, the first one corresponds to scientific approach, while the last one corresponds to a technological one. Applied Geology to Engineering could be defined as the Science and Applied Geology to the design, construction and performance of engineering infrastructures in and field geology discipline. There has been much discussion on the primacy of theory over practice. Today prevails the exaggeration of practice, but you get good workers and routine and mediocre teachers. This idea forgets too that teaching problem is a problem of right balance. The approach of the action lines on the European Higher Education Area (EHEA) framework provides for such balance. Applied Geology subject represents the first real contact with the physical environment with the practice profession and works. Besides, the situation of the topic in the first trace of Study Plans for many students implies the link to other subjects and topics of the career (tunnels, dams, groundwater, roads, etc). This work analyses in depth the justification of such practical trips. It shows the criteria and methods of planning and the result which manifests itself in pupils. Once practical trips experience developed, the objective work tries to know about results and changes on student’s motivation in learning perspective. This is done regardless of the outcome of their knowledge achievements assessed properly and they are not subject to such work. For this objective, it has been designed a survey about their motivation before and after trip. Survey was made by the Unidad Docente de Geología Aplicada of the Departamento de Ingeniería y Morfología del Terreno (Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid). It was completely anonymous. Its objective was to collect the opinion of the student as a key agent of learning and teaching of the subject. All the work takes place under new teaching/learning criteria approach at the European framework in Higher Education. The results are exceptionally good with 90% of student’s participation and with very high scores in a number of questions as the itineraries, teachers and visited places (range of 4.5 to 4.2 in a 5 points scale). The majority of students are very satisfied (average of 4.5 in a 5 points scale).

Learning and Assessing Competencies: New challenges for Mathematics in Engineering Degrees in Spain.

The introduction of new degrees adapted to the European Area of Higher Education (EAHE) has involved a radically different approach to the curriculum. The new programs are structured around competencies that should be acquired. Considering the competencies, teachers must define and develop learning objectives, design teaching methods and establish appropriate evaluation systems. While most Spanish universities have incorporated methodological innovations and evaluation systems different from traditional exams, there is enough confusion about how to teach and assess competencies and learning outcomes, as traditionally the teaching and assessment have focused on knowledge. In this paper we analyze the state-of-the-art in the mathematical courses of the new engineering degrees in some Spanish universities.

Promotion of professional skills in engineering education: strategies and challenges

Basic engineering skills are not the only key to professional development, particularly as engineering problems are everyday more and more complex and multifaceted, hence requiring the implementation of larger multidisciplinary teams, in many cases working in an international context and in a continuously evolving environment. Therefore other outcomes, sometimes referred to as professional skills, are also necessary for our students, as most universities are already aware. In this study we try to methodically analyze the main strategies for the promotion of professional skills, mainly linked to actuations which directly affect students or teachers (and teaching methodologies) and which take advantage of the environment and available resources. From an initial list of 51 strategies (in essence aimed at promotion of different drivers of change, linked to students, teachers, environment and resources), we focus on the 11 drivers of change considered more important after an initial evaluation. Subsequently, a systematic analysis of the typical problems linked to these main drivers of change, enables us to find and formulate 12 major and usually repeated and unsolved problems. After selecting these typical problems, we put forward 25 different solutions, for short-term actuation, and discuss their effects, while bearing in mind our team’s experience, together with the information from the studies carried out by numerous teaching staff from other universities.

Strengthening and measuring project management competences of engineering students

Since 2010 the Industrial Engineering School at Universidad Politécnica de Madrid (ETSII UPM) has its Plan Study accredited by ABET. Since then a big motivation has been promoted from the management team encouraging teachers to work on the measurement and strengthening of student¿s competences. Generic skills or behavior acquired significant importance in the workplace, particularly in relation to project management. Because of this, and framed within the requirements of the European Higher Education Area (EHEA), the curriculum of the new degrees are being developed under the competence-based learning. This situation leads to the need to have a clear measurement tool skills as a basis for developing them within the curriculum. A group of multidisciplinary teachers have been working together during two years to design measuring instruments valid for engineering students.

Differences between the personal, social and emotional profiles of teaching and computer engineering professionals and students

The evidence suggests that emotional intelligence and personality traits are important qualities that workers need in order to successfully exercise a profession. This article assumes that the main purpose of universities is to promote employment by providing an education that facilitates the acquisition of abilities, skills, competencies and values. In this study, the emotional intelligence and personality profiles of two groups of Spanish students studying degrees in two different academic disciplines – computer engineering and teacher training – were analysed and compared. In addition, the skills forming part of the emotional intelligence and personality traits required by professionals (computer engineers and teachers) in their work were studied, and the profiles obtained for the students were compared with those identified by the professionals in each field. Results revealed significant differences between the profiles of the two groups of students, with the teacher training students scoring higher on interpersonal skills; differences were also found between professionals and students for most competencies, with professionals in both fields demanding more competencies that those evidenced by graduates. The implications of these results for the incorporation of generic social, emotional and personal competencies into the university curriculum are discussed.

Workshops in “Construction of Structures I”: A new teaching methodology in the Building Engineering Degree

Both the current economic situation in the construction sector and the continuous normative changes in the building area imply the use of new methodologies to enhance students’ competences in the degree of Building Engineer. The aim of this paper is to present, analyse and discuss the development of constructive workshops as a new teaching methodology used in the subject of Construction of Structures I at the University of Alicante to complement the constructive and technical knowledge acquired by our students and to enhance their communicative and representation skills essential for their professional practice in the future. The used methodology is based on the development of three-dimensional construction details (in groups of 3 or 4 students) to be shown in two A1-pannels exposed in the corridors of the Polytechnic School. Thus, students’ work approaches constructive problems in a global way by discussing simultaneously with teachers and other groups about the most suitable solution on each case. This contribution has multiperspective results and improves criticism of students in different areas, encouraging new learning strategies and active participation. What is more, on-line information and web applications have been used to prepare and organize this kind of workshops, allowing students to use new technologies as a complementary learning methodology. In conclusion, the use of these new workshops in the Degree of Building Engineer stimulates an interactive class versus a traditional lecture where the participative groups´ attitude and the development of oral presentations dissolve the traditional boundaries regarding public communication skills of the students in the Degree.

An Interdisciplinary Practical for Multimedia Engineering Students

Interdisciplinary projects in the industry typically require collaboration between professionals from various fields. However, this relationship is not generally addressed in the training offered by university programs, which often ignore this interdisciplinary approach. This paper offers an example of interdisciplinary interaction through joint laboratory activities in the curricula of two very different degree programs, i.e., Multimedia Engineering and Teacher Training in Primary Education. The programs' students formed an interdisciplinary team of multimedia engineers and trainee teachers to develop a Web product for children's cognitive development. The complexity of the task required students to engage in close and strong interdisciplinary cooperation and communication; in turn, they benefited from the synergy offered by collaborative work. The results of this paper, presented from the perspective of the multimedia engineering students, demonstrate a significant increase in their academic performance compared to the control group. This paper shows that university studies can incorporate an interdisciplinary perspective to engineering education without the need to introduce a specific course on the topic, thus avoiding further demands on the curriculum schedule.

Researching primary engineering education:a UK perspective, an exploratory study

This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

Methodological Foundations of Fundamental Engineering Education

In the paper, methodological aspects of nowadays high engineering education are considered. Thoughts generalizing author’s long-term experience are set forth. Recommendations on the improvement of pedagogical process and training system for young teachers are given.

Experiences on dynamic simulation software in chemical engineering education

Commercial process simulators are increasing interest in the chemical engineer education. In this paper, the use of commercial dynamic simulation software, D-SPICE® and K-Spice®, for three different chemical engineering courses is described and discussed. The courses cover the following topics: basic chemical engineering, operability and safety analysis and process control. User experiences from both teachers and students are presented. The benefits of dynamic simulation as an additional teaching tool are discussed and summarized. The experiences confirm that commercial dynamic simulators provide realistic training and can be successfully integrated into undergraduate and graduate teaching, laboratory courses and research. © 2012 The Institution of Chemical Engineers.

"How prepared are engineering educators to implement active learning?" - The emerging findings

This paper discusses the question of how well prepared Engineering Educators are to implement Active Learning approaches within Higher Education undergraduate Engineering Programmes in Malaysia. As the role of Higher Education has shifted from being that of a 'knowledge provider' to become primarily focused upon 'learning facilitation', so the role of teachers or academic staff has changed in that they have become the key to implementing successful Active Learning. Based upon the emergent findings from a case study conducted at a Malaysian institution of higher education, the paper reveals that the engineering educators within the institution concerned were neither prepared nor ready to implement Active Learning. Indeed, it is evident from the study findings that a huge effort is needed in terms of educational policy and practice to ensure that Malaysian institutions offering engineering education should move efficiently and effectively towards the unilateral adoption of Active Learning approaches.

Getting round pegs into round holes:getting students onto the right engineering programme

Aston University offers a Foundation year in Engineering and Applied Science. The purpose of this programme is to prepare people with the necessary skills and knowledge required to enrol on an undergraduate programme in Engineering and Applied Science. It is acknowledged there are many misconceptions as to what engineering is. This is further compounded by the lack of knowledge of the different engineering disciplines both by pre-university students and careers teachers [1]. In order to ameliorate this lack of knowledge, Aston University offers a unique programme where students are given the opportunity to have a ?taste? of four Engineering Disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering and Computer Science. Alongside these ?taster? sessions, the students study a Professional Skills module where they are expected to keep a portfolio of skills. In their portfolios they comment on their strengths and weakness in relation to six skill areas: independent enquirer, self-manager, effective participator, creative thinker, reflective learner and team worker. The portfolio gives them the opportunity to perform a self-skills audit and identify areas where they have strengths and areas which require work to improve to become a competent professional engineer. They also have talks from engineers who discuss with them their careers and the different aspects of engineering. The purpose of the ?taster? sessions, portfolio and the talks are to encourage the students to critically examine their career aspirations and choose an engineering undergraduate programme which best suits their ambitions and potential skills. The feedback from students has been very positive. The ?taster? sessions have enabled them to make an informed choice as to the undergraduate programme they would like to study. The programme has given them the technical skills and knowledge to enrol on an undergraduate programme and also the skills and knowledge to be a successful learner.

Inspiring young people to engage in engineering education:The Aston University Engineering Academy Birmingham

This paper initially reports concerns about the falling interest in engineering and mathematical disciplines and looks at some of the reasons for this. It then discusses the aims of the Engineering Diploma - a qualification for 14-19 year olds in the UK - and the pedagogical research that that has informed the design and development. The paper highlights the key learning theories that support the delivery of this qualification and provides an example of how this pedagogy has been applied effectively through the curriculum partnership that has been developed between a consortium of schools in the Birmingham local authority, Aston University and employers. It establishes the importance of aligning the curriculum and articulating clear engineering progression routes from the age of fourteen to enable young people to be inspired and motivated towards careers in engineering. The paper presents the view of parents, teachers and pupils involved with the Diploma, during the first year, and the way in which the partnership is informing future developments in the delivery of engineering curriculum within the region. The success of this regional partnership model has resulted in the Department of Children, Schools and Families agreeing to fund the development of the Aston University Engineering Academy Birmingham. This is a school for 14-19 year olds that will open in 2012 on the Aston Science Park adjacent to the University. The final part of the paper looks at the benefits to the young local engineers of this initiative. © 2009 Authors.