Zinc adsorption in highly weathered soils

The objective of this work was to assess the effects of pH and ionic strength upon zinc adsorption, in three highly weathered variable charge soils. Adsorption isotherms were elaborated from batch adsorption experiments, with increasing Zn concentrations (0-80 mg L-1), and adsorption envelopes were constructed through soil samples reactions with 0.01, 0.1 and 1 mol L-1 Ca(NO3)2 solutions containing 5 mg L-1 of Zn, with an increasing pH value from 3 to 8. Driving force of reaction was quantified by Gibbs free energy and separation factor. Isotherms were C-, H- and L-type and experimental results were fitted to nonlinear Langmuir model. Maximum adsorption ranged from 59-810 mg kg-1, and Zn affinity was greater in subsoil (0.13-0.81 L kg-1) than in the topsoil samples (0.01-0.34 L kg-1). Zinc adsorption was favorable and spontaneous, and showed sharply increase (20-90%) in the 4-6 pH range. No effect of ionic strength was observed at pH values below 5, because specific adsorption mechanisms predominated in the 3-5 pH range. Above pH 5, and in subsoil samples, Zn was adsorbed by electrostatic mechanisms, since ionic strength effect was observed. Despite depth and ionic strength effects, Zn adsorption depends mainly on the pH.

Altering α-dystroglycan receptor affinity of LCMV pseudotyped lentivirus yields unique cell and tissue tropism.

BACKGROUND: The envelope glycoprotein of lymphocytic choriomeningitis virus (LCMV) can efficiently pseudotype lentiviral vectors. Some strains of LCMV exploit high affinity interactions with α-dystroglycan (α-DG) to bind to cell surfaces and subsequently fuse in low pH endosomes. LCMV strains with low α-DG affinity utilize an unknown receptor and display unique tissue tropisms. We pseudotyped non-primate feline immunodeficiency virus (FIV) vectors using LCMV derived glycoproteins with high or low affinity to α-DG and evaluated their properties in vitro and in vivo. METHODS: We pseudotyped FIV with the LCMV WE54 strain envelope glycoprotein and also engineered a point mutation in the WE54 envelope glycoprotein (L260F) to diminish α-DG affinity and direct binding to alternate receptors. We hypothesized that this change would alter in vivo tissue tropism and enhance gene transfer to neonatal animals. RESULTS: In mice, hepatic α- and β-DG expression was greatest at the late gestational and neonatal time points. When displayed on the surface of the FIV lentivirus the WE54 L260F mutant glycoprotein bound weakly to immobilized α-DG. Additionally, LCMV WE54 pseudotyped FIV vector transduction was neutralized by pre-incubation with soluble α-DG, while the mutant glycoprotein pseudotyped vector was not. In vivo gene transfer in adult mice with either envelope yielded low transduction efficiencies in hepatocytes following intravenous delivery. In marked contrast, neonatal gene transfer with the LCMV envelopes, and notably with the FIV-L260F vector, conferred abundant liver and lower level cardiomyocyte transduction as detected by luciferase assays, bioluminescent imaging, and β-galactosidase staining. CONCLUSIONS: These results suggest that a developmentally regulated receptor for LCMV is expressed abundantly in neonatal mice. LCMV pseudotyped vectors may have applications for neonatal gene transfer. ABBREVIATIONS: Armstrong 53b (Arm53b); baculovirus Autographa californica GP64 (GP64); charge-coupled device (CCD); dystroglycan (DG); feline immunodeficiency virus (FIV); glycoprotein precursor (GP-C); firefly luciferase (Luc); lymphocytic choriomeningitis virus (LCMV); nuclear targeted β-galactosidase (ntLacZ); optical density (OD); PBS/0.1% (w/v) Tween-20 (PBST); relative light units (RLU); Rous sarcoma virus (RSV); transducing units per milliliter (TU/ml); vesicular stomatitis virus (VSV-G); wheat germ agglutinin (WGA); 50% reduction in binding (C50).

Influência da percepção dos profissionais quanto ao aborto provocado na atenção à saúde da mulher

OBJETIVO: Identificar o conhecimento e a percepção dos profissionais da saúde em relação à legislação brasileira sobre o aborto provocado. MÉTODOS: Envelopes selados não identificados contendo os questionários foram enviados a todos os profissionais (n=149) que trabalham no Departamento de Obstetrícia de hospital universitário e de hospital público da periferia de São Paulo. Responderam ao questionário 119 profissionais. Para análise dos dados, utilizou-se intervalo de confiança de 0,05 e os testes exatos de Fischer e χ². RESULTADOS: Dos profissionais entrevistados, 48,7% eram médicos, 33,6% profissionais da área de enfermagem e 17,6% eram profissionais de outras áreas (psicólogos, nutricionistas, fisioterapeutas, administrativos e técnicos de laboratórios). Constatou-se diferença significativa (p=0,01) na proporção de profissionais que acreditam que o aborto por malformação fetal não letal e no aborto decorrente de gestações não planejadas deveriam ser incluídos na legislação brasileira. Observou-se que o conhecimento da legislação e da descrição das situações permitidas por lei acerca do aborto foi significativamente diferente na comparação entre os profissionais de saúde (p=0,01). Quando questionados sobre as situações em que a legislação brasileira permite o aborto, observou-se que 32,7% dos médicos, 97,5% profissionais da área de enfermagem e 90,5% dos demais profissionais desconhecem a legislação vigente. CONCLUSÃO: Neste estudo, evidenciou-se o desconhecimento dos profissionais de saúde com relação à legislação brasileira, em menor proporção entre obstetras e em maior proporção entre os profissionais da área de enfermagem. Foram constatadas atitudes de discriminação, julgamento e preconceito na assistência prestada às mulheres que provocam o aborto.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Germinação de sementes de melão osmoticamente condicionadas durante o armazenamento

O condicionamento osmótico das sementes de melão pode amenizar o efeito inibitório das baixas temperaturas, melhorando, assim, a germinação e a emergência das plântulas no campo. O objetivo desse trabalho foi avaliar a viabilidade das sementes de melão condicionadas e não condicionadas durante o armazenamento. Sementes de melão foram condicionadas por nove dias, a 25°C, em solução aerada de KNO3 (0,35M). As sementes condicionadas ou não foram acondicionadas em envelopes aluminizados e armazenadas por 0, 6, 12, 18 e 24 meses em condições ambientais de laboratório. Sementes condicionadas apresentaram uma maior deterioração durante o armazenamento, sendo que, após 24 meses, apenas 30% germinaram, comparado com 78% nas sementes não condicionadas. Estudos devem ser enfatizados visando, simultaneamente, alcançar um efeito positivo do condicionamento e minimizar os efeitos deletérios durante o armazenamento.

Efeito de diferentes materiais de peletização na deterioração de sementes de tomate durante o armazenamento

O revestimento de sementes de hortaliças é uma técnica bastante utilizada, principalmente para as espécies que possuem sementes pequenas, sendo uma de suas funções, o aumento do tamanho das mesmas para fins de semeadura. Neste contexto, o presente trabalho teve como objetivo revestir sementes de tomate com diferentes materiais, e avaliar seu comportamento durante o armazenamento. Utilizaram como revestimento uma mistura de areia + microcelulose e outra de calcário + microcelulose, contendo ou não o fungicida Rovrin na dosagem de 200g/100 kg de sementes. As sementes revestidas, juntamente com as não revestidas (com ou sem fungicida), foram secadas e embaladas em envelopes de papel comum (embalagem permeável) e em papel laminado (embalagem impermeável) e armazenadas em condições de ambiente no Laboratório de Análise de Sementes da Universidade Federal de Lavras. A avaliação da qualidade das sementes foi realizada a cada quatro meses, por um período de 24 meses, utilizando as seguintes determinações: teste de germinação, envelhecimento acelerado e emergência de plântulas em solo + areia. Pelos resultados obtidos, conclui-se que: sementes revestidas apresentaram germinação mais lenta do que as não revestidas; sementes revestidas com calcário + microcelulose deterioram mais rápido que com areia + microcelulose e sementes tratadas com fungicida em associação com os materiais de revestimento perdem sua qualidade mais rapidamente durante o armazenamento. Verificou-se ainda que sementes revestidas com areia + microcelulose e sem tratamento fungicida mantiveram sua qualidade durante os 24 meses de armazenamento, independente da embalagem utilizada.

Desempenho de sementes de pimentão revestidas com diferentes materiais

A técnica de revestimento de sementes tem sido bastante utilizada, principalmente para as espécies que possuem sementes pequenas, como as olerícolas, forrageiras, florestais e ornamentais, pois além de aumentar o tamanho das mesmas para fins de semeadura direta, possibilita a aplicação de outros elementos essenciais ao bom desempenho da cultura em sua fase inicial. Neste contexto, o presente trabalho teve como objetivo revestir sementes de pimentão com diferentes tipos de materiais e avaliar seu comportamento durante o armazenamento. Sementes tratadas ou não com Rovrin, na dosagem de 200g/100kg, foram submetidas ao pré-condicionamento, pela embebição das sementes em solução de KNO3 a -1,1MPa, em sistema aerado por cinco dias. Após secas, as sementes foram revestidas com uma mistura de areia + microcelulose e outra de calcário + microcelulose. As sementes revestidas, juntamente com as não revestidas, foram secadas e embaladas em envelopes de papel comum (embalagem permeável) e em papel laminado (embalagem impermeável) e armazenadas em condições de ambiente no Laboratório de Análise de Sementes da UFLA. A avaliação da qualidade das sementes foi realizada a cada quatro meses, por um período de 20 meses, utilizando as seguintes determinações: teor de água, teste de germinação, envelhecimento acelerado, deterioração controlada e emergência em solo + areia. Pelos resultados obtidos, conclui-se que o revestimento de sementes reduz a velocidade, mas não afeta a taxa de germinação das sementes de pimentão antes do armazenamento; no entanto, as sementes revestidas deterioram mais rapidamente do que as não revestidas quando armazenadas em embalagem permeável. A natureza dos materiais de revestimento não influencia na qualidade das sementes de pimentão, quando armazenadas em embalagem impermeável.

Qualidade fisiológica de sementes de urucum armazenadas em diferentes ambientes e embalagens

Urucum (Bixa orellana L.) é uma cultura de grande interesse comercial, sendo o principal produto a semente, da qual se extrai os corantes bixina e norbixina, de valor nos mercados nacional e internacional. Este trabalho objetivou avaliar a qualidade fisiológica de sementes de urucum, cultivar Bico de Pato, armazenadas por um período de 12 meses em quatro ambientes (condição ambiental, câmara fria, refrigerador e freezer) e acondicionadas nas embalagens (envelopes trifoliados de papel-alumínio-polietileno, embalagem plástica em condições de vácuo e polietileno preto). Após as determinações do grau de umidade, as sementes foram escarificadas mecanicamente. Foram realizadas avaliações da qualidade das sementes aos 90, 180, 270, 360 dias do armazenamento pelos testes de germinação, primeira contagem de germinação e índice de velocidade de germinação. Concluiu-se que sementes de urucum com umidade de 7,0%, embaladas em condições de vácuo mantém sua qualidade fisiológica por até 270 dias e que as condições de armazenamento em freezer e refrigerador, em embalagens de alumínio e plástico em condições de vácuo proporcionam sementes de maior qualidade fisiológica.

Women over thirty choosing education as a solution to a problem

This study explored motivations of mid-life women over 30 years old who had returned to school. It sought to fmd whether these women returned to solve a problem arising from life events, whether viewing a problem was related to internal or external motivation, whether this perception was related to having greater coping skills, and whether having greater coping was related to seeking support from internal or external sources. This study examined which emotions were most related to viewing a life event as a problem. Finally, it explored the results of previous research of mid-life women in their role as a student. Women (N==83) from three types of institutions volunteered for this study: a university (N==34), a college (N==28), and an adult education centre (N==21). Participants took home a questionnaire package - a I3-page questionnaire and consent form - that were completed and mailed back to the researcher in pre-paid envelopes. Results showed that women over 30 seek education as a solution to a life event problem. External motivation was related to a life event being a problem (p<.005). There was a significant difference in coping scores between institutions. Moods that were related to viewing a life event as problematic were: anger and depressive moods (p<. 001), fatigue and vigor (p<.O 1), and tension/anxiety (p<.05). Mid-life women students' satisfaction in this role was related to being externally motivated. These women sought support from both internal and external sources, rarely had social interactions with peers, and viewed this role as important, yet, temporary in that it will help them change their lives. Implications ofthe results suggest further exploration ofthe roles of anger and depression in motivating women over 30 to learn and finding ways of directing women to use their emotional intelligence to seek out learning.

Commemorative stamps, British, American and Canadian, 1974-1977, 1982-1984, 1996.

The Guernsey post office stamps consist of 2 exhibition series souvenir sheets commemorating Major-General Sir Issac Brock, 1769-1812. The stamp was issued in 1996 to celebrate Guernsey’s attendance at Canada’s international stamp exhibition CAPEX 96. The stamps issued by the United States postal service consist of 1 sheet of stamps commemorating the 50th anniversary of the Peace Bridge, 1927-1977. The stamps issued by Canada Post include 5 commemorative day-of-issue envelopes with stamps featuring William Hamilton Merritt and the Welland Canal. This stamp was issued in 1974 to celebrate the 150th anniversary of the canal. There is also a set of 4 inscription corner blocks of stamps. These items are contained in an envelope addressed to Mr. J.N. Jackson, St. Catharines, ON. There is also a separate sheet of the same stamp. Also issued by Canada Post are 2 full sheets of stamps, one commemorating the 50th anniversary of the Peace Bridge (1927-1977), and one commemorating 25 years of the St. Lawrence Seaway (1959-1984). Lastly, there are 2 full sheets of stamps commemorating the 100th anniversary of the Royal Henley Regatta, issued in 1982.

Marriage Certificate - Hamilton K. Woodruff and Julia C. Cleveland

The marriage certificate of Mr. Hamilton K. Woodruff of St. Catharines and Miss Julia C. Cleveland of Erie, Pennsylvania. This is certificate no. 5221 signed by James C. Wilson. This is accompanied by 2 envelopes; one envelope is from Henry L. Rea, clerk of courts, Erie Pennsylvania to Mr. H. K. Woodruff, the other envelope just says "marriage certificate Mrs. H. K. Woodruff", Nov. 21, 1894.

Analyse multi-échelle des champs magnétiques dans des nuages moléculaires à structures filmentaires

Associée à d'autres techniques observationnelles, la polarimétrie dans le visible ou dans le proche infrarouge permet d'étudier la morphologie des champs magnétiques à la périphérie de nombreuses régions de formation stellaire. A l'intérieur des nuages molécualires la morphologie des champs est connue par polarimétrie submillimétrique, mais rarement pour les mêmes régions. Habituellement, il manque une échelle spatiale intermédiaire pour pouvoir comparer correctement la morphologie du champ magnétique galactique avec celle située à l'intérieur des nuages moléculaires. -- Cette thèse propose les moyens nécessaires pour réaliser ce type d'analyse multi-échelle afin de mieux comprendre le rôle que peuvent jouer les champs magnétiques dans les processus de formation stellaire. La première analyse traite de la région GF 9. Vient ensuite une étude de la morphologie du champ magnétique dans les filaments OMC-2 et OMC-3 suivie d'une analyse multi-échelle dans le complexe de nuages moléculaires Orion A dont OMC-2 et OMC-3 font partie. -- La synthèse des résultats couvrant GF 9 et Orion A est la suivante. Les approches statistiques employées montrent qu'aux grandes échelles spatiales la morphologie des champs magnétiques est poloïdale dans la région GF 9, et probablement hélicoïdale dans la région Orion A. A l'échelle spatiale des enveloppes des nuages moléculaires, les champs magnétiques apparaissent alignés avec les champs situés à leur périphérie. A l'échelle spatiale des coeurs, le champ magnétique poloïdal environnant la région GF 9 est apparemment entraîné par le coeur en rotation, et la diffusion ambipolaire n'y semble pas effective actuellement. Dans Orion A, la morphologie des champs est difficilement détectable dans les sites actifs de formation d'OMC-2, ou bien très fortement contrainte par les effets de la gravité dans OMC-1. Des effets probables de la turbulence ne seont détectés dans aucune des régions observées. -- Les analyses multi-échelles suggèrent donc qu'indépendamment du stade évolutif et de la gamme de masse des régions de formation stellaires, le champ magnétique galactique subit des modifications de sa morphologie aux échelles spatiales comparables à celles des coeurs protostellaires, de la même façon que les propriétés structurelles des nuages moléculaires suivent des lois d'autosimilarité jusqu'à des échelles comparables à celles des coeurs.

A Characterization of Exact Non-atomic Market Games

Continuous exact non-atomic games are naturally associated to certain operators between Banach spaces. It thus makes sense to study games by means of the corresponding operators. We characterize non-atomic exact market games in terms of the properties of the associated operators. We also prove a separation theorem for weak compact sets of countably additive measures, which is of independent interest.

EPDM/CIIR Blends: Compatibility, Morphology and Physical Properties

A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.

Exercise sheet 5 pdf

Exercises and solutions in PDF