Predictive factors of contact lens case contamination

PURPOSE: To examine the relationship between contact lens (CL) case contamination and various potential predictive factors. METHODS: 74 subjects were fitted with lotrafilcon B (CIBA Vision) CLs on a daily wear basis for 1 month. Subjects were randomly assigned one of two polyhexamethylene biguanide (PHMB) preserved disinfecting solutions with the corresponding regular lens case. Clinical evaluations were conducted at lens delivery and after 1 month, when cases were collected for microbial culture. A CL care non-compliance score was determined through administration of a questionnaire and the volume of solution used was calculated for each subject. Data was examined using backward stepwise binary logistic regression. RESULTS: 68% of cases were contaminated. 35% were moderately or heavily contaminated and 36% contained gram-negative bacteria. Case contamination was significantly associated with subjective dryness symptoms (OR 4.22, CI 1.37–13.01) (P<0.05). There was no association between contamination and subject age, ethnicity, gender, average wearing time, amount of solution used, non-compliance score, CL power and subjective redness (P>0.05). The effect of lens care system on case contamination approached significance (P=0.07). Failure to rinse the case with disinfecting solution following CL insertion (OR 2.51, CI 0.52–12.09) and not air drying the case (OR 2.31, CI 0.39–13.35) were positively correlated with contamination; however, did not reach statistical significance. CONCLUSIONS: Our results suggest that case contamination may influence subjective comfort. It is difficult to predict the development of case contamination from a variety of clinical factors. The efficacy of CL solutions, bacterial resistance to disinfection and biofilm formation are likely to play a role. Further evaluation of these factors will improve our understanding of the development of case contamination and its clinical impact.

José Penna y Salvador Mazza en tiempos del cólera : salud, inmigración y legitimidad política en la Argentina de 1910

Resumen: Este artículo estudia las teorías sobre el origen, contagio y control del cólera en el siglo XIX, los intentos de las autoridades de la Argentina por contrarrestar estas epidemias y por último, la campaña anticolérica de 1910. Hasta ese momento, las medidas preventivas habían priorizado la vigilancia, desinfección y aislamiento de viviendas, objetos y personas infectadas. Pero el reciente descubrimiento de la transmisión el cólera por individuos asintomáticos hizo que en 1910 el Departamento Nacional de Higiene (DNH) impusiese un sistema de análisis bacteriológico obligatorio. En particular, el artículo examina las ideas y actividades de José Penna, quien en 1910 se desempeñaba como director del DGN y de Salvador Mazza. Un médico recién recibido, este último estuvo a cargo del laboratorio bacteriológico del lazareto de Martín García donde se sometía a estudio a todos los pasajeros de tercera clase provenientes de zonas infectadas de cólera. El DNH presentó la campaña anticolérica de 1910 como resultado de la experiencia acumulada durante el siglo XIX, del progreso científico y administrativo de la Argentina y de los esfuerzos de las autoridades por proteger a la nación. En un momento en que la elite argentina luchaba para mantener su dominio, tanto reprimiendo como buscando co-optar a la oposición, las cuestiones de salud pública constituyeron un elemento importante de la retórica política.

A new method for venom extraction from venomous fish, green scat

Scatophagus argus argus (Green Scat) is a pretty aquarium fish. Its hard spines are venomous and can cause painful injury. In this study 60 specimens of Green Scat were collected periodically from coastal waters of Boushehr (south of Iran) from May 2011 to April 2012. Anatomical features of venomous spines were investigated. Scat venom was extracted from the spines in a new manner for keeping the specimens alive. The nature of venom was tested by SDS-PAGE. Ethical issues and animal welfare principles such as rapid and instantaneous anesthetizing, post operation disinfection and fast recovery of the specimens was practiced in order to minimize the complications. This method enhanced the purity and quantity of venom as demonstrated by 12 separated proteins in electrophoresis. New ethical issues were developed to surviving the specimens and prolong viability as well.

Suspension plasma sprayed coatings using dilute hydrothermally produced titania feedstocks for photocatalytic applications

Titanium dioxide coatings have potential applications including photocatalysts for solar assisted hydrogen production, solar water disinfection and self-cleaning windows. Herein, we report the use of suspension plasma spraying (SPS) for the deposition of conformal titanium dioxide coatings. The process utilises a nanoparticle slurry of TiO2 (ca. 6 and 12 nm respectively) in water, which is fed into a high temperature plasma jet (ca. 7000-20 000 K). This facilitated the deposition of adherent coatings of nanostructured titanium dioxide with predominantly anatase crystal structure. In this study, suspensions of nano-titanium dioxide, made via continuous hydrothermal flow synthesis (CHFS), were used directly as a feedstock for the SPS process. Coatings were produced by varying the feedstock crystallite size, spray distance and plasma conditions. The coatings produced exhibited ca. 90-100% anatase phase content with the remainder being rutile (demonstrated by XRD). Phase distribution was homogenous throughout the coatings as determined by micro-Raman spectroscopy. The coatings had a granular surface, with a high specific surface area and consisted of densely packed agglomerates interspersed with some melted material. All of the coatings were shown to be photoactive by means of a sacrificial hydrogen evolution test under UV radiation and compared favourably with reported values for CVD coatings and compressed discs of P25.

Facteurs de risque modifiables associés à l’incidence, l’élimination et la prévalence d’infections intra-mammaires chez la vache laitière en lactation

La mammite subclinique est un problème de santé fréquent et coûteux. Les infections intra-mammaires (IIM) sont souvent détectées à l’aide de mesures du comptage des cellules somatiques (CCS). La culture bactériologique du lait est cependant requise afin d’identifier le pathogène en cause. À cause de cette difficulté, pratiquement toutes les recherches sur la mammite subclinique ont été centrées sur la prévalence d’IIM et les facteurs de risque pour l’incidence ou l’élimination des IIM sont peu connus. L’objectif principal de cette thèse était d’identifier les facteurs de risque modifiables associés à l’incidence, l’élimination et la prévalence d’IIM d’importance dans les troupeaux laitiers Canadiens. En premier lieu, une revue systématique de la littérature sur les associations entre pratiques utilisées à la ferme et CCS a été réalisée. Les pratiques de gestion constamment associées au CCS ont été identifiées et différentiées de celles faisant l’objet de rapports anecdotiques. Par la suite, un questionnaire bilingue a été développé, validé, et utilisé afin de mesurer les pratiques de gestion d’un échantillon de 90 troupeaux laitiers canadiens. Afin de valider l’outil, des mesures de répétabilité et de validité des items composant le questionnaire ont été analysées et une évaluation de l’équivalence des versions anglaise et française a été réalisée. Ces analyses ont permis d’identifier des items problématiques qui ont du être recatégorisés, lorsque possible, ou exclus des analyses subséquentes pour assurer une certaine qualité des données. La plupart des troupeaux étudiés utilisaient déjà la désinfection post-traite des trayons et le traitement universel des vaches au tarissement, mais beaucoup des pratiques recommandées n’étaient que peu utilisées. Ensuite, les facteurs de risque modifiables associés à l’incidence, à l’élimination et à la prévalence d’IIM à Staphylococcus aureus ont été investigués de manière longitudinale sur les 90 troupeaux sélectionnés. L’incidence d’IIM semblait être un déterminant plus important de la prévalence d’IIM du troupeau comparativement à l’élimination des IIM. Le port de gants durant la traite, la désinfection pré-traite des trayons, de même qu’une condition adéquate des bouts de trayons démontraient des associations désirables avec les différentes mesures d’IIM. Ces résultats viennent souligner l’importance des procédures de traite pour l’obtention d’une réduction à long-terme de la prévalence d’IIM. Finalement, les facteurs de risque modifiables associés à l’incidence, à l’élimination et à la prévalence d’IIM à staphylocoques coagulase-négatif (SCN) ont été étudiés de manière similaire. Cependant, afin de prendre en considération les limitations de la culture bactériologique du lait pour l’identification des IIM causées par ce groupe de pathogènes, une approche semi-Bayesienne à l’aide de modèles de variable à classe latente a été utilisée. Les estimés non-ajusté de l’incidence, de l’élimination, de la prévalence et des associations avec les expositions apparaissaient tous considérablement biaisés par les imperfections de la procédure diagnostique. Ce biais était en général vers la valeur nulle. Encore une fois, l’incidence d’IIM était le principal déterminant de la prévalence d’IIM des troupeaux. Les litières de sable et de produits du bois, de même que l’accès au pâturage étaient associés à une incidence et une prévalence plus basse de SCN.

Zinc as an agent for the prevention of biofilm formation by pathogenic bacteria

Les biofilms sont des communautés structurées de micro-organismes enrobées dans une matrice extracellulaire. Les biofilms sont impliqués dans la persistance de plusieurs maladies infectieuses et la matrice extracellulaire du biofilm protège les bactéries contre les cellules du système immunitaire de l'hôte, les antibiotiques et les désinfectants. Récemment notre laboratoire a démontré que le zinc inhibe la formation de biofilm chez Actinobacillus pleuropneumoniae, une bactérie pathogène du porc. Le but de cette étude est d'évaluer l'effet du zinc sur la croissance et la formation du biofilm chez différentes bactéries pathogènes du porc, telles que Bordetella bronchiseptica, Escherichia coli, Haemophilus parasuis, Salmonella, Staphylococcus aureus et Streptococcus suis. Les bactéries ont été cultivées dans des plaques de 96 puits sous condition optimale de formation de biofilm et les biofilms ont été colorés au cristal violet. La présence du biofilm a été confirmée par microscopie confocale à balayage laser à l’aide du marqueur fluorescent FilmTracerTM FM ® 1-43. À des concentrations micromolaires, le zinc inhibe faiblement la croissance bactérienne et bloque d'une manière dose-dépendante la formation de biofilm d’A. pleuropneumoniae, Salmonella Typhimurium et H. parasuis. De plus, la formation de biofilm de E. coli, S. aureus et S. suis a été faiblement inhibée par le zinc. Nos résultats indiquent que le zinc a un effet inhibiteur sur la formation de biofilm de la plupart des pathogènes bactériens d'origine porcine. Cependant, le mécanisme sous-jacent de l'activité anti-biofilm du zinc reste à être caractérisé.

Proyecto sobre el mejoramiento del proceso hospitalario de asignación de camas y desinfección

El siguiente trabajo de grado tiene como propósito principal analizar los procesos realizados en Clínicas y Hospitales con respecto a la asignación de habitaciones para pacientes ingresando a estas instituciones médicas y con respecto a los procesos de desinfección y aseo que se llevan a cabo ahí mismo. El proyecto de mejoramiento del proceso hospitalario de asignación de camas y desinfección se basó en una auditoría realizada por los autores del mismo a la Clínica Nueva en la ciudad de Bogotá durante el primer semestre del año en curso. El trabajo se divide en cuatro partes: situación actual, diagnóstico, situación propuesta y conclusiones con sus respectivas recomendaciones. En la situación actual se observa la manera en la que se realizan los procesos dentro de la clínica en evaluación y cuyo diagnóstico se expone en la segunda parte. Luego se propone una situación en la cual el proceso de asignación de camas y de desinfección dentro de la clínica sería el óptimo, para así finalizar con las conclusiones del trabajo y las respectivas recomendaciones para poder implementar los planes de mejora establecidos a los largo del escrito.

HSE - Microbiological Safety Cabinet Training Video

This training video is intended to familiarise researchers and technicians, working with potentially airborne pathogens, on the correct and safe use of Microbiological Safety Cabinets. The video also provides instruction on cleaning, disinfection and fumigation regimes; maintenance and testing regimes; and commissioning and decommissioning requirements of such Local Exhaust Ventilation (LEV) systems. It is in Windows Media Video format which will require a free media player such as Windows Media Player or VLC Media Player (http://www.videolan.org/vlc/) to watch.

Freqüência e etiologia das dermatomicoses em pacientes atendidos no Hospital Giselda Trigueiro, Natal, RN

Dermatomycoses are fungal infections that attack the skin, hair and nails, in addition to the mucosal and cutaneous-mucosal zones. Objective: Observe the frequency of dermatomycoses, identify etiological agents and establish an association between the results and sex. Age, collection site, time and lesion location. Methods: Between February, 2002 and December, 2004, samples were collected from patients at Giselda Trigueiro Hospital in Natal, Brazil, by lesion scraping and hair removal, following 70% alcohol disinfection, and submitted to direct and culture examination. Results: Of the 817 lesions collected, 325 (39.8%) were fungus positive, with the hair collection site yielding the highest number of positive results (65.8%) and the scalp and hair representing the most frequent lesion sites (65.9%). Negative results occurred mainly in the lower limbs (78.6%). Of the species identified, 55.9% were yeasts, 41.6% dermatophytes and 2.5% Fusarium spp. Non-albicans Candida was the most isolated yeast (43.3%), mainly in females (61.7%) over the age of 40 years (56.4%). T. rubrum was the most isolated dermatophyte (67.9%),notably in males (59.2%) in the 0-20 age group (44.7%). With respect to collection site, 73.9% of the dermatophytes were present in the skin and 61.1% of the yeasts in the nails. When assessing the collection site, the inguinocrural regional was 22.6% positive for dermatophytes, and the nails and hands, 41.8% for yeasts. Conclusions: The results obtained verified that: most of the positive lesions were found in the hair, whereas skin and nail lesions yielded more negative results; T. rubrum was the most isolated dermatophyte and non-albicans candida the most commonly found yeast; positivity was greater in males in the 0-20 year age group at the skin site and in the inguinocrural region, while yeasts were more frequent in females in the over-40 age group at the nail sites

Drinking water as a risk factor to poultry health

In the poultry industry, the use of water with adequate physical, chemical and microbiological quality it is of fundamental importance. Since many birds have access to the same water source, quality problems will affect a great number of animals. The drinking water plays an important role in the transmission of some bacterial, viral and protozoan diseases that are among the most common poultry diseases. Important factors to prevent waterborne diseases in broiler production are the protection of supply sources, water disinfection and the quality control of microbiological, chemical and physical characteristics. Water is an essential nutrient for birds and therefore quality preservation is fundamental for good herd performance. The farmer may prevent many diseases in bird flocks by controlling the quality of the ingested water, will certainly result in decreased costs and increased profit, two essential aims of animal production nowadays.

Desinfecção solar de água para comunidades de baixa renda

The use of solar energy for water disinfection, and is accessible to disadvantaged communities because of its low cost, has the advantage of using disposable materials such as bottles of polyethylene terephthalate (PET). We present a study that used two methods of disinfection: the methodology proposed by the project Solar Water Disinfection (SODIS), which consisted of water disinfection by solar radiation and temperature and the methodology which the temperature of the water for disinfection. In both, we seek to eliminate microorganisms that cause serious diseases such as dysentery, typhoid, cholera, etc. Water samples were collected in the community of Bass, where the population has low income and the incidence of waterborne diseases is high. The experiments were divided into two stages. In step 1 we studied the feasibility of disinfection and in step 2 the feasibility of the pilot plant to obtain adequate levels of disinfection temperatures desired. The results showed the efficiency of the disinfection process, reaching an average of 80 to 100% death of microorganisms, but regrowth was observed in some samples. Finally on the good results of stage 1, is designed and built and tested in an experimental pilot plant, which has shown to be feasible to promote water disinfection through the use of solar energy. The water after treatment is in accordance with the limits established by Brazilian legislation for clean water, maintaining a positive performance for the disinfection and acceptable levels of bacterial regrowth

Análise de desempenho de um fogão solar construído a partir de sucatas de antena de tv

Given the growing environmental crisis caused by degradation, mainly due to the use of polluting energy sources, increasing the growing use of renewable energies worldwide, with emphasis on solar energy, an abundant supply and available to everyone, which can be harnessed in several ways: electricity generation; dehydration of food; heating, disinfection and distillation and cooking. The latter has as its primary feature the viability of clean, renewable energy for society, combating ecological damage caused by large-scale use of firewood for cooking foods, use in tropical countries with high solar radiation, and has funding NGOs throughout the world with the goal of achieving low-income population. The proposed project consists of a solar cooker for concentration, working from the reflection of sunlight by a hub that they converge to a focal point at the bottom of the pot, getting lots of heat. The solar cooker under study consists of two elliptical reflecting parabolas made from the recycling of scrap TV antenna, having 0.29 m² of surface area for each antenna, which were covered by multiple mirrors of 2 mm thick and mounted on a metal structure, with correction for the mobility of the apparent movement of the sun. This structure was built with the recycling of scrap metal, possessing a relatively low cost compared with other solar cookers, around US$ 50.00. This cost becomes negligible, since that will involve a great benefit to not have fuel costs for each meal, unlike the use of gas or firewood for cooking food. The tests show that the cooker has reached the maximum temperature of 740 ° C, for boiling water in an average time of 28 minutes, cooking various types of foods such as potatoes, rice and pasta in an average time of 45 minutes and still going as a solar oven, making pizza baking and meat. These cooking times do not differ much from the cooking times on a gas stove, it becomes the solar cooker as a good consumer acceptance, and furthermore not to deliver the same gases that can poison the food as with the wood stove. Proves the viability of using the stove to cook or bake in two daily meals for a family, still presenting a position to improve his performance with the addition of new materials, equipment and techniques

Influence of a Parafunctional Oral Habit on Root Fracture Development After Trauma to an Immature Tooth

Root fractures in immature teeth are rare because the resilience of the alveolar bone is more favorable to the occurrence of luxation. This article reports a case of traumatic injury in an immature permanent tooth that progressed to root fracture, having a parafunctional oral habit as the possible modifying factor of case evolution. A 12-year-old boy presented for treatment complaining of a defective restoration and mild pain on the maxillary right central incisor. The patient had a history of crown fracture in this tooth due to trauma 2 years before. The clinical examination showed healthy gingival tissues and no abnormal tooth mobility, whereas radiographic projections revealed healthy periradicular tissues, incomplete root formation, and no visible root fracture. As pulp necrosis was diagnosed, calcium hydroxide therapy was started for canal disinfection and subsequent obturation. However, after 4 weeks of treatment, a horizontal fracture line was observed radiographically in the root's middle third. The patient denied a new traumatic injury, but revealed the habit of chewing on a pencil. Refraining from the deleterious oral habit was strongly advised, and root canal filling with mineral trioxide aggregate was performed to treat the root fracture. After 4 years of follow-up, the tooth has normal function and no abnormal mobility. Images suggestive of remodeling at the apical end of the coronal segment and replacement resorption of the apical segment are seen radiographically. This case demonstrates the need of following cases of dental trauma and the possible influence of parafunctional oral habits as modifying factors of case progression.

Efeito da desinfecção por aerossóis sobre a capacidade de umedecimento de moldes de poliéter por gesso tipo IV

A desinfecção de todo e qualquer molde obtido é medida de biossegurança obrigatória na atividade clínica. Tão importante quanto a desinfecção é a seleção do método e da solução desinfetante a ser utilizada para cada material de moldagem. É imperativo que a capacidade de reprodução de detalhes, a estabilidade dimensional e o grau de umedecimento (ou molhabilidade) não sejam criticamente afetados. O propósito deste trabalho foi avaliar o grau de umedecimento de uma marca comercial de poliéter (Impregum F) por três diferentes marcas comerciais de gesso tipo IV (Herostone, Durone e Polirock), após sua desinfecção por aerossóis de hipoclorito de sódio 1% (líquido de Milton) ou glutaraldeído 2% (Glutalabor II). Foram confeccionados 45 moldes de poliéter, os quais, em grupos de 15, receberam aerossóis de água (Grupo Controle), Líquido de Milton ou Glutalabor II. em seguida, sobre a superfície dos moldes foram confeccionados modelos de gesso tipo IV, em número de 5 para cada marca de gesso. Após seu seccionamento mediano e preparo da superfície de corte, os modelos foram levados ao microscópio Carl Zeiss para leitura do ângulo de contato. Os resultados obtidos permitiram concluir que: a) a capacidade de umedecimento do poliéter por diferentes marcas comerciais de gesso tipo IV variou para os gessos estudados; b) o gesso Durone adaptou-se melhor aos moldes de poliéter do que os gessos Herostone e Polirock; c) a desinfecção dos moldes com aerossóis de hipoclorito de sódio 1% (líquido de Milton) ou glutaraldeído 2% (Glutalabor) não afetou a adaptação entre os gessos e o poliéter.

Biossegurança e odontologia: crenças e atitudes de graduandos sobre o controle da infecção cruzada

Este estudo teve o objetivo de investigar as percepções de graduandos de Odontologia sobre a fidelidade às diretrizes de biossegurança e acerca do preservar-se. Nove questões abertas, que abordaram aspectos de interesse para o tema, foram aplicadas em entrevista com 14 acadêmicos, que realizavam atendimento odontológico de pacientes da Faculdade de Odontologia de Araraquara da Unesp. Utilizou-se a metodologia de pesquisa qualitativa e a estratégia metodológica para análise das entrevistas foi a Discurso do Sujeito Coletivo (DSC). Três figuras metodológicas foram obtidas, sendo ideias-centrais, expressões-chave e o DSC propriamente dito. A análise dos discursos permitiu avaliar a fala natural da coletividade. Verificou-se a adesão dos entrevistados aos protocolos de biossegurança, embora houvesse a queixa de que, na rotina diária, as precauções fossem negligenciadas por não serem muito práticas. Entre as medidas de proteção individual e coletiva, rotineiramente utilizadas, foram apontados o uso de Equipamento de Proteção Individual (EPI) e as barreiras protetoras, bem como as atividades de desinfecção e esterilização. O risco de contágio foi visto por alguns com pavor e por outros com total indiferença porque acreditavam ser algo do qual é possível de se ter controle por meio da adesão às precauções padrão. Entre as doenças de maior preocupação, a aids e as hepatites B e C foram as mais temidas. Diante do discurso obtido, salienta-se a necessidade de se aperfeiçoar as estratégias educacionais, com intuito de motivar a fiel adesão às normas de biossegurança, essenciais no trato de pacientes odontológicos.