SRTM resample with short distance-low nugget kriging

The shuttle radar topography mission (SRTM), was flow on the space shuttle Endeavour in February 2000, with the objective of acquiring a digital elevation model of all land between 60 degrees north latitude and 56 degrees south latitude, using interferometric synthetic aperture radar (InSAR) techniques. The SRTM data are distributed at horizontal resolution of 1 arc-second (similar to 30m) for areas within the USA and at 3 arc-second (similar to 90m) resolution for the rest of the world. A resolution of 90m can be considered suitable for the small or medium-scale analysis, but it is too coarse for more detailed purposes. One alternative is to interpolate the SRTM data at a finer resolution; it will not increase the level of detail of the original digital elevation model (DEM), but it will lead to a surface where there is the coherence of angular properties (i.e. slope, aspect) between neighbouring pixels, which is an important characteristic when dealing with terrain analysis. This work intents to show how the proper adjustment of variogram and kriging parameters, namely the nugget effect and the maximum distance within which values are used in interpolation, can be set to achieve quality results on resampling SRTM data from 3"" to 1"". We present for a test area in western USA, which includes different adjustment schemes (changes in nugget effect value and in the interpolation radius) and comparisons with the original 1"" model of the area, with the national elevation dataset (NED) DEMs, and with other interpolation methods (splines and inverse distance weighted (IDW)). The basic concepts for using kriging to resample terrain data are: (i) working only with the immediate neighbourhood of the predicted point, due to the high spatial correlation of the topographic surface and omnidirectional behaviour of variogram in short distances; (ii) adding a very small random variation to the coordinates of the points prior to interpolation, to avoid punctual artifacts generated by predicted points with the same location than original data points and; (iii) using a small value of nugget effect, to avoid smoothing that can obliterate terrain features. Drainages derived from the surfaces interpolated by kriging and by splines have a good agreement with streams derived from the 1"" NED, with correct identification of watersheds, even though a few differences occur in the positions of some rivers in flat areas. Although the 1"" surfaces resampled by kriging and splines are very similar, we consider the results produced by kriging as superior, since the spline-interpolated surface still presented some noise and linear artifacts, which were removed by kriging.

Monitoramento da morfologia costeira em setores da bacia potiguar sob influência da indústria petrolífera utilizando geodésia de alta precisão e laser escâner terrestre

The objective of this Doctoral Thesis was monitoring, in trimestral scale, the coastal morphology of the Northeastern coast sections of Rio Grande do Norte State, in Brazil, which is an area of Potiguar Basin influenced by the oil industry activities. The studied sections compose coastal areas with intense sedimentary erosion and high environmental sensitivity to the oil spill. In order to achieve the general objective of this study, the work has been systematized in four steps. The first one refers to the evaluation of the geomorphological data acquisition methodologies used on Digital Elevation Model (DEM) of sandy beaches. The data has been obtained from Soledade beach, located on the Northeastern coast of Rio Grande Norte. The second step has been centered on the increasing of the reference geodetic infrastructure to accomplish the geodetic survey of the studied area by implanting a station in Corta Cachorro Barrier Island and by conducting monitoring geodetic surveys to understand the beach system based on the Coastline (CL) and on DEM multitemporal analysis. The third phase has been related to the usage of the methodology developed by Santos; Amaro (2011) and Santos et al. (2012) for the surveying, processing, representation, integration and analysis of Coastlines from sandy coast, which have been obtained through geodetic techniques of positioning, morphological change analysis and sediment transport. The fourth stage represents the innovation of surveys in coastal environment by using the Terrestrial Laser Scanning (TLS), based on Light Detection and Ranging (LiDAR), to evaluate a highly eroded section on Soledade beach where the oil industry structures are located. The evaluation has been achieved through high-precision DEM and accuracy during the modeling of the coast morphology changes. The result analysis of the integrated study about the spatial and temporal interrelations of the intense coastal processes in areas of building cycles and destruction of beaches has allowed identifying the causes and consequences of the intense coastal erosion in exposed beach sections and in barrier islands

Extração automática de contornos de telhados usando dados de varredura a laser e campos randômicos de Markov

This paper proposes a methodology for automatic extraction of building roof contours from a Digital Elevation Model (DEM), which is generated through the regularization of an available laser point cloud. The methodology is based on two steps. First, in order to detect high objects (buildings, trees etc.), the DEM is segmented through a recursive splitting technique and a Bayesian merging technique. The recursive splitting technique uses the quadtree structure for subdividing the DEM into homogeneous regions. In order to minimize the fragmentation, which is commonly observed in the results of the recursive splitting segmentation, a region merging technique based on the Bayesian framework is applied to the previously segmented data. The high object polygons are extracted by using vectorization and polygonization techniques. Second, the building roof contours are identified among all high objects extracted previously. Taking into account some roof properties and some feature measurements (e. g., area, rectangularity, and angles between principal axes of the roofs), an energy function was developed based on the Markov Random Field (MRF) model. The solution of this function is a polygon set corresponding to building roof contours and is found by using a minimization technique, like the Simulated Annealing (SA) algorithm. Experiments carried out with laser scanning DEM's showed that the methodology works properly, as it delivered roof contours with approximately 90% shape accuracy and no false positive was verified.

Predição de sombras de edifícios sobre vias urbanas com base em modelos digitais de elevações e dados de imagens aéreas de alta resolução

This research presents a methodology for prediction of building shadows cast on urban roads existing on high-resolution aerial imagery. Shadow elements can be used in the modeling of contextual information, whose use has become more and more common in image analysis complex processes. The proposed methodology consists in three sequential steps. First, the building roof contours are manually extracted from an intensity image generated by the transformation of a digital elevation model (DEM) obtained from airborne laser scanning data. In similarly, the roadside contours are extracted, now from the radiometric information of the laser scanning data. Second, the roof contour polygons are projected onto the adjacent roads by using the parallel projection straight lines, whose directions are computed from the solar ephemeris, which depends on the aerial image acquisition time. Finally, parts of shadow polygons that are free from building perspective obstructions are determined, given rise to new shadow polygons. The results obtained in the experimental evaluation of the methodology showed that the method works properly, since it allowed the prediction of shadow in high-resolution imagery with high accuracy and reliability.

Remote sensing analysis of depositional landforms in alluvial settings: Method development and application to the Taquari megafan, Pantanal (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Delineation of specific management areas for coffee cultivation based on the soil-relief relationship and numerical classification

Predicting and mapping productivity areas allows crop producers to improve their planning of agricultural activities. The primary aims of this work were the identification and mapping of specific management areas allowing coffee bean quality to be predicted from soil attributes and their relationships to relief. The study area was located in the Southeast of the Minas Gerais state, Brazil. A grid containing a total of 145 uniformly spaced nodes 50 m apart was established over an area of 31. 7 ha from which samples were collected at depths of 0. 00-0. 20 m in order to determine physical and chemical attributes of the soil. These data were analysed in conjunction with plant attributes including production, proportion of beans retained by different sieves and drink quality. The results of principal component analysis (PCA) in combination with geostatistical data showed the attributes clay content and available iron to be the best choices for identifying four crop production environments. Environment A, which exhibited high clay and available iron contents, and low pH and base saturation, was that providing the highest yield (30. 4l ha-1) and best coffee beverage quality (61 sacks ha-1). Based on the results, we believe that multivariate analysis, geostatistics and the soil-relief relationships contained in the digital elevation model (DEM) can be effectively used in combination for the hybrid mapping of areas of varying suitability for coffee production. © 2012 Springer Science+Business Media New York.

SIG e sensoriamento remoto aplicado ao estudo dos processos de inundação e mapeamento da cobertura vegetal na planície fluvial do alto Rio Paraná

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dinâmica no uso da terra de 1991 a 2010 da região semiárida do estado do Piauí: cajucultura e apicultura

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Mapeamento dos parâmetros florísticos e estruturais de floresta de mangue com dados LIDAR e SRTM

Este estudo apresenta a estimativa dos parâmetros florísticos e estruturais (determinação da espécie, altura, diâmetro a altura do Peito - DAP e biomassa) do mangue a partir de informações da superfície adquiridas remotamente com os sensores Laser Detection and Range (LIDAR), Shuttle Radar Topography Mission (SRTM) e ortofotos na Ilha dos Guarás, conjunto de arquipélagos localizado a 30 km da desembocadura do rio amazonas. Para esse trabalho foram utilizadas informações do SRTM, LIDAR e fotografias aéreas processadas e ortorretificadas durante dois sobrevôos realizados entre o mês de julho e agosto de 2011. Com a ortofoto foi feito o mapa do reconhecimento de unidades geobotânicas que delimitou apenas a classe mangue. Em seguida, foi realizada a correção da altura elipsoidal para a altura ortométrica, onde a nuvem de pontos foi interpolada pelo método vizinho mais próximo, gerando Modelo Digital de Elevação (MDE) LIDAR (full points) com RMSE de 0,88 cm e por meio de uma linguagem macro foi estatisticamente separadas as informações do último pulso da superfície, conhecido também por ground points. Em seguida, os dados foram interpolados pelo método de krigeagem que gerou o valor de Modelo Digital de Superfície (MDS), o qual foi subtraído do MDE. Com base no Modelo Digital de Vegetação (MDV) foram definidos os sítios de coleta e selecionadas as árvores ascendentes, intermediárias e emergentes, porte no qual foi medido o DAP e altura. No total foram coletadas 212 amostras individuais de mangue e para assegurar o nível de acurácia do conjunto coletado, foi realizado o cálculo de RMSE entre as alturas do LIDAR e Campo, que resultou em RMSE= 1,10 m. Os modelos escolhidos para calibração LIDAR e altura de campo foi do tipo linear, com R² = 91% e RMSE= 0,98 cm e para calibração da DAP e altura de campo foi escolhido o modelo Logarítmico R² = 74,1%. Nos resultados da calibração do SRTM o modelo logarítmico também foi o mais adequado para a relação entre altura média e SRTM com R² = 91% e RMSE de 2,2 m e DAP Médio e SRTM, com R² = 88% e RMSE 2,2 cm. A partir de um inventário foi realizada a estimativa da biomassa por espécie por meio das equações alométricas de Fromard e posteriormente os resultados foram espacializados em forma de mapas com alto nível de detalhamento oriundo das informações LIDAR e SRTM corrigido e ortofotos.

Análise espacial do conteúdo de água da bacia hidrográfica do Rio Pardo

O presente trabalho tem por objetivo avaliar a distribuição espacial, por geoestatística, da produção de água gerada pelo modelo hidrológico matemático SWAT 2009 (Soil and Water Assessment Tool, versão 2009), da parte inicial da bacia hidrográfica do Rio Pardo – SP. Foi utilizado um Sistema de Informação Geográfica (SIG) associado a uma interface com o modelo SWAT para a confecção do banco de dados. Para isto, as informações de entrada necessárias para avaliar a produção de lâmina de água (mm), que infiltrou e armazenou em cada sub-bacia gerada pelo SWAT, referem-se a dados tabulares climáticos e de parâmetros físicos e químicos de solo e a planos de informações como: o Modelo Numérico do Terreno (MNT), Mapa de Uso do Solo e Mapa de Solos. A amostragem geoestatística foi representada por uma malha irregular georreferenciada com 43 pontos localizados na parte central de cada sub-bacia representando a quantidade de água produzida. A análise geoestatística foi realizada pela construção dos variogramas e posteriormente a confecção dos mapas interpolados por krigagem. Do resultado obtido observou-se que a produção de água apresentou dependência espacial e que esta ocorreu de forma homogênea, tanto para os maiores como para os menores valores de produção de água encontrados na bacia.

Análise quali-qualitativa e por meio de sistema de informações geográficas da arborização do quadrilátero central de Ribeirão Preto, SP

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Bioengenharia no controle de processos erosivos de áreas de hidrelétricas – o caso da PCH Costa Rica (MS)

The crescent increasing demand of the electric power in Brazil has stimulated the implantation of Small Central Hydroelectric Power (SCHP) in several regions of the country. However, the silting up of the reservoirs is one of the main problems faced by hydroelectric power plants and SCHP. In this context, this research aimed evaluate the phenomenology and propose the enforcement of appropriate bioengineering techniques to control the intense erosive process of the hydrographical basin of the “Alto Rio Sucuriú,” that cause silting up of the reservoirs of the SCHP Costa Rica, located in the municipal district of Costa Rica (MS). In order to identify the phenomenology of the main falling in of this basin, a diagnosis of the conditions of the physical environment of the region (climate, geology, pedology, hydrology, and use of the ground) was realized. A surveying was also realized to specify the geometric feature of the falling in using the Total Station of the Ruide brand, series RTS 860R and the geodetic GPS of the Ashtech brand and the data obtained was used on the preparation of the Digital Elevation Model (DEM) of the falling in. Based on this diagnosis an official register of the falling in was done with identification of the different types of present erosion. Due to the advanced erosive stage of the falling in researched, the use of bioengineering techniques could be the best solution considering that the traditional engineering techniques make use of heavy material like concrete, iron and large machines that besides causing higher impact to the natural and esthetic aspects of the environment also require a higher investment of capital. This research establish a great cooperation to the knowledge of the erosive process and of the rehabilitation of the degraded areas with application of bioengineering techniques not only hydrographical basin of “Alto Rio Sucuriú” but also to other basins that show similar situation

Potencial de ocorrência de avarias ambientais em bacias hidrográficas com ocupação rural mediante análise morfométrica

The understanding of the geo-morphological characteristics allows the identification of flood areas and instability slopes among others important features for land use planning. The study of the hydrological net and the analysis of morphometric parameters help in the geomorphologic characterization, providing specific physics indicators that quantify the risks for environmental damages. The present work used Geographic Information Systems (GIS) and carried out the morphometric analysis of two watersheds in the Alto Rio Sorocaba, municipality of Ibiuna (SP). Using digitalized topographic bases in the scale 1:50,000, the main morphometric parameters were extracted and the Digital Elevation Model (DEM) was obtained. Hence the slope, ground illumination, hill orientation and relief feature maps were elaborated. The characteristics for the two watersheds were quite similar, both have low risks for floods and landslides. Therefore, the concave feature is the predominant hill shape for both watersheds. The morphometric parameters directly related to the river density of the watersheds showed some differences, because the Sorocabuçú watershed presents higher value, resulting in a higher level of relief development. Thus, with this characterization it is possible to provide subsidies for environmental planning actions to the area.

Modelo hidrológico SWAT na determinação das perdas de solo na bacia hidrológica do Rio Pardo - Botucatu/SP

The objective of this work was to evaluate the sediment production in the initial part of the Pardo River Basin - Botucatu/SP from 1994 to 1999, using the mathematical hydrological model SWAT. It was used topographic maps and satellite data manipulated in GIS using the software SPRING 5.1.6. The simulation of sediment production was generated with the aid of an interface between the hydrological model SWAT 2009 with ArcView ®, version 9.3. The maps of Soil, Land Use and Digital Elevation Model (DEM) were generated in the GIS-SPRING 5.1.6 and exported to ArcSWAT 2009. The tabular data related to the parameters of soil and meteorological parameters were entered directly to the SWAT. The model allowed to estimate the sediment production. A sediment average production rate of 33.866 ton ha-1 over the six years of study was computed in the point of discharge of the basin.

Assoreamento de lago integrante da sub-baciado Córrego da Cascata, Botucatu, SP: implicações morfométricas

The watershed is considered a unit of territorial study, planning and land management, and is molded by the local geologic conditions and climate. Thus, this study aimed to assess the morphometric features of the subwatershed of Cascata Stream, in Botucatu (SP), and their implications for the siltation process in a lake. The assessment included indexes generated from data calculated by means of a digitalized cartographic basis georeferenced on the 1:10,000 scale using the software AutoCad map 2004. The software Quantum GIS 1.8 was also employed to generate the digital elevation model (DEM) and the map of declivities which led to the mean declivity (Dm) of the subwatershed. According to the indexes form factor (Kf), sinuosity (Is), circularity (Ic) and compacity coefficient (Kc), the subwatershed had elongated form, low propensity to floods and rapid flow. The draining density (Dd) and relief ratio (Rr) indicated more efficient mean drainage, favoring higher desiccation and mean erosive stage. The roughness coefficient (Cr) indicated that this subwatershed is suited to agriculture. The anthropic intervention at the watershed dividing line is the major factor for sediment carrying in the lake and compromises not only the landscape beauty, but also the aquatic life of this ecosystem.