Desarrollo de herramientas y estrategias para el ordenamiento territorial

El presente no es un proyecto de investigación, sino de gestión y desarrollo de herramientas para la toma de decisiones. Su objetivo es colaborar dentro del marco de la "Red Nacional de Ordenamiento y Desarrollo Territorial" (Poder Ejecutivo Nacional, 2004) propuesta por el Gobierno Nacional, con los gobiernos provinciales y otros organismos en la planificación del uso de los recursos del territorio, procurando un manejo sostenible de los mismos, a fin de reducir en forma progresiva los desequilibrios espaciales, contribuyendo a elevar la calidad de vida de todos los habitantes del país. En las últimas décadas, ante la existencia de una creciente presión antrópica sobre el medio natural y, paralelamente, un mayor grado de conocimiento de las causas y efectos de los diferentes riesgos, éstos han comenzado a tener mayor influencia en la determinación de políticas y prioridades para inversiones o emprendimientos económicos en general y en la fijación de pautas de ocupación del territorio. La planificación aparece como una herramienta adecuada para orientar y organizar el desarrollo equitativo y sustentable de un territorio y la población que lo ocupa. El Ordenamiento Territorial (OT) significa disponer, con orden, la ocupación y usos del territorio según la mayor o menor aptitud de sus diferentes elementos constitutivos. Este proyecto se considera estratégico para el Programa Nacional Ecoregiones del INTA (PNECO), ya que encara los problemas territoriales desde un punto de vista global (aspectos económicos, sociales, productivos, culturales y ambientales), tradicionalmente tratados de forma sectorial, plantea directivas a mediano y largo plazo (escenarios) y guía la planificación regional y local. El enfoque central del OT es la visión participativa, acordando intereses contrapuestos (trade-offs1) y sinérgicos, transformando amenazas en oportunidades. Es este punto central el que permitirá vincular el PNECO con todos sus Proyecto Específicos (PE), considerando el marco de políticas públicas vinculadas al medio ambiente y la producción en cada ecoregión del país, asociado al Programa Nacional de Territorios del INTA

Export Restrictions in relation to Extractive Industries

A new E15 Think Piece by Ilaria Espa produced under the E15Initiative (E15). Implemented jointly by the International Centre for Trade and Sustainable Development (ICTSD) and the World Economic Forum, the E15 convenes world-class experts and institutions to generate strategic analysis and recommendations for government, business and civil society geared towards strengthening the global trade system. This paper considers concrete policy options to better regulate the use of export restrictions in relation to extractive industries. It briefly describes recent trends in the use of export restrictions on mineral and energy resources. It gives an account of the main shortcomings in the WTO legal treatment of export restrictions. It accordingly discusses possible avenues for reforming existing WTO disciplines in the interest of secure access to supplies, while still taking into account the need to preserve some policy space for host countries to use such measures as legitimate development tools.

A New End-User Composition Model to Empower Knowledge Workers to Develop Rich Internet Applications

Enabling real end-user programming development is the next logical stage in the evolution of Internetwide service-based applications. Even so, the vision of end users programming their own web-based solutions has not yet materialized. This will continue to be so unless both industry and the research community rise to the ambitious challenge of devising an end-to-end compositional model for developing a new age of end-user web application development tools. This paper describes a new composition model designed to empower programming-illiterate end users to create and share their own off-the-shelf rich Internet applications in a fully visual fashion. This paper presents the main insights and outcomes of our research and development efforts as part of a number of successful European Union research projects. A framework implementing this model was developed as part of the European Seventh Framework Programme FAST Project and the Spanish EzWeb Project and allowed us to validate the rationale behind our approach.

Developing front-end Web 2.0 technologies to access services, content and things in the future Internet

The future Internet is expected to be composed of a mesh of interoperable web services accessible from all over the web. This approach has not yet caught on since global user?service interaction is still an open issue. This paper states one vision with regard to next-generation front-end Web 2.0 technology that will enable integrated access to services, contents and things in the future Internet. In this paper, we illustrate how front-ends that wrap traditional services and resources can be tailored to the needs of end users, converting end users into prosumers (creators and consumers of service-based applications). To do this, we propose an architecture that end users without programming skills can use to create front-ends, consult catalogues of resources tailored to their needs, easily integrate and coordinate front-ends and create composite applications to orchestrate services in their back-end. The paper includes a case study illustrating that current user-centred web development tools are at a very early stage of evolution. We provide statistical data on how the proposed architecture improves these tools. This paper is based on research conducted by the Service Front End (SFE) Open Alliance initiative.

A platform for real-time control education with LEGO MINDSTORMS.

A set of software development tools for building real-time control systems on a simple robotics platform is described in the paper. The tools are being used in a real-time systems course as a basis for student projects. The development platform is a low-cost PC running GNU/Linux, and the target system is LEGO MINDSTORMS NXT, thus keeping the cost of the laboratory low. Real-time control software is developed using a mixed paradigm. Functional code for control algorithms is automatically generated in C from Simulink models. This code is then integrated into a concurrent, real-time software architecture based on a set of components written in Ada. This approach enables the students to take advantage of the high-level, model-oriented features that Simulink oers for designing control algorithms, and the comprehensive support for concurrency and real-time constructs provided by Ada.

Advanced system of planning and organization of classes at the university

This document is the result of a process of web development to create a tool that will allow to Cracow University of Technology consult, create and manage timetables. The technologies chosen for this purpose are Apache Tomcat Server, My SQL Community Server, JDBC driver, Java Servlets and JSPs for the server side. The client part counts on Javascript, jQuery, AJAX and CSS technologies to perform the dynamism. The document will justify the choice of these technologies and will explain some development tools that help in the integration and development of all this elements: specifically, NetBeans IDE and MySQL workbench have been used as helpful tools. After explaining all the elements involved in the development of the web application, the architecture and the code developed are explained through UML diagrams. Some implementation details related to security are also deeper explained through sequence diagrams. As the source code of the application is provided, an installation manual has been developed to run the project. In addition, as the platform is intended to be a beta that will be grown, some unimplemented ideas for future development are also exposed. Finally, some annexes with important files and scripts related to the initiation of the platform are attached. This project started through an existing tool that needed to be expanded. The main purpose of the project along its development has focused on setting the roots for a whole new platform that will replace the existing one. For this goal, it has been needed to make a deep inspection on the existing web technologies: a web server and a SQL database had to be chosen. Although the alternatives were a lot, Java technology for the server was finally selected because of the big community backwards, the easiness of modelling the language through UML diagrams and the fact of being free license software. Apache Tomcat is the open source server that can use Java Servlet and JSP technology. Related to the SQL database, MySQL Community Server is the most popular open-source SQL Server, with a big community after and quite a lot of tools to manage the server. JDBC is the driver needed to put in contact Java and MySQL. Once we chose the technologies that would be part of the platform, the development process started. After a detailed explanation of the development environment installation, we used UML use case diagrams to set the main tasks of the platform; UML class diagrams served to establish the existing relations between the classes generated; the architecture of the platform was represented through UML deployment diagrams; and Enhanced entity–relationship (EER) model were used to define the tables of the database and their relationships. Apart from the previous diagrams, some implementation issues were explained to make a better understanding of the developed code - UML sequence diagrams helped to explain this. Once the whole platform was properly defined and developed, the performance of the application has been shown: it has been proved that with the current state of the code, the platform covers the use cases that were set as the main target. Nevertheless, some requisites needed for the proper working of the platform have been specified. As the project is aimed to be grown, some ideas that could not be added to this beta have been explained in order not to be missed for future development. Finally, some annexes containing important configuration issues for the platform have been added after proper explanation, as well as an installation guide that will let a new developer get the project ready. In addition to this document some other files related to the project are provided: - Javadoc. The Javadoc containing the information of every Java class created is necessary for a better understanding of the source code. - database_model.mwb. This file contains the model of the database for MySQL Workbench. This model allows, among other things, generate the MySQL script for the creation of the tables. - ScheduleManager.war. The WAR file that will allow loading the developed application into Tomcat Server without using NetBeans. - ScheduleManager.zip. The source code exported from NetBeans project containing all Java packages, JSPs, Javascript files and CSS files that are part of the platform. - config.properties. The configuration file to properly get the names and credentials to use the database, also explained in Annex II. Example of config.properties file. - db_init_script.sql. The SQL query to initiate the database explained in Annex III. SQL statements for MySQL initialization. RESUMEN. Este proyecto tiene como punto de partida la necesidad de evolución de una herramienta web existente. El propósito principal del proyecto durante su desarrollo se ha centrado en establecer las bases de una completamente nueva plataforma que reemplazará a la existente. Para lograr esto, ha sido necesario realizar una profunda inspección en las tecnologías web existentes: un servidor web y una base de datos SQL debían ser elegidos. Aunque existen muchas alternativas, la tecnología Java ha resultado ser elegida debido a la gran comunidad de desarrolladores que tiene detrás, además de la facilidad que proporciona este lenguaje a la hora de modelarlo usando diagramas UML. Tampoco hay que olvidar que es una tecnología de uso libre de licencia. Apache Tomcat es el servidor de código libre que permite emplear Java Servlets y JSPs para hacer uso de la tecnología de Java. Respecto a la base de datos SQL, el servidor más popular de código libre es MySQL, y cuenta también con una gran comunidad detrás y buenas herramientas de modelado, creación y gestión de la bases de datos. JDBC es el driver que va a permitir comunicar las aplicaciones Java con MySQL. Tras elegir las tecnologías que formarían parte de esta nueva plataforma, el proceso de desarrollo tiene comienzo. Tras una extensa explicación de la instalación del entorno de desarrollo, se han usado diagramas de caso de UML para establecer cuáles son los objetivos principales de la plataforma; los diagramas de clases nos permiten realizar una organización del código java desarrollado de modo que sean fácilmente entendibles las relaciones entre las diferentes clases. La arquitectura de la plataforma queda definida a través de diagramas de despliegue. Por último, diagramas EER van a definir las relaciones entre las tablas creadas en la base de datos. Aparte de estos diagramas, algunos detalles de implementación se van a justificar para tener una mejor comprensión del código desarrollado. Diagramas de secuencia ayudarán en estas explicaciones. Una vez que toda la plataforma haya quedad debidamente definida y desarrollada, se va a realizar una demostración de la misma: se demostrará cómo los objetivos generales han sido alcanzados con el desarrollo actual del proyecto. No obstante, algunos requisitos han sido aclarados para que la plataforma trabaje adecuadamente. Como la intención del proyecto es crecer (no es una versión final), algunas ideas que se han podido llevar acabo han quedado descritas de manera que no se pierdan. Por último, algunos anexos que contienen información importante acerca de la plataforma se han añadido tras la correspondiente explicación de su utilidad, así como una guía de instalación que va a permitir a un nuevo desarrollador tener el proyecto preparado. Junto a este documento, ficheros conteniendo el proyecto desarrollado quedan adjuntos. Estos ficheros son: - Documentación Javadoc. Contiene la información de las clases Java que han sido creadas. - database_model.mwb. Este fichero contiene el modelo de la base de datos para MySQL Workbench. Esto permite, entre otras cosas, generar el script de iniciación de la base de datos para la creación de las tablas. - ScheduleManager.war. El fichero WAR que permite desplegar la plataforma en un servidor Apache Tomcat. - ScheduleManager.zip. El código fuente exportado directamente del proyecto de Netbeans. Contiene todos los paquetes de Java generados, ficheros JSPs, Javascript y CSS que forman parte de la plataforma. - config.properties. Ejemplo del fichero de configuración que permite obtener los nombres de la base de datos - db_init_script.sql. Las consultas SQL necesarias para la creación de la base de datos.

Desarrollo de una aplicación web orientada a la asistencia en el diseño de protocolos de biología sintética

Se plantea desarrollar una herramienta que ofrezca un soporte eficiente para la creación y el diseño de protocolos biológicos a los investigadores en biología sintética. Partiendo de este objetivo, se definen dos cometidos principales: Realizar un estudio de las herramientas existentes que ofrezcan soporte al diseño y aquellas pensadas para diseñar protocolos biológicos, el fin de este estudio es descubrir las funcionalidades que implementan estas herramientas para mejorarlas. Además, se ha de desarrollar una herramienta web que, mediante un lenguaje visual, permita diseñar y crear protocolos de biología sintética, guardándolos en un formato de archivo independiente del lenguaje. En este documento se encuentra, en primer lugar, la definición de objetivos y la descripción del método de desarrollo seguido durante la implementación del proyecto; después, el marco teórico, donde se exponen las herramientas estudiadas y las similitudes y diferencias con la idea que se tiene de la aplicación, y también las herramientas de desarrollo web con las que se va a implementar el proyecto. A continuación, se muestran los resultados obtenidos, mediante la definición de requisitos, así como una exposición de la propia herramienta. Por último, se encuentra la estrategia de validación que se ha seguido en el desarrollo del proyecto y se exponen las conclusiones obtenidas de estas validaciones; también se incluyen al final las conclusiones del proyecto y las líneas futuras de desarrollo.---ABSTRACT---It is planned to develop a tool that provides efficient support for the creation and design of biological protocols researchers in synthetic biology. Based on this goal, two main tasks are defined: Conduct a study of existing tools that provide design support and those intended to design biological protocols, the purpose of this study is to discover the functionalities that implement these tools to improve them. Furthermore, it has to develop a web tool that, through a visual language, allowing design and create synthetic biology protocols, storing them in an independent language file format. In this document is located, first, the definition of objectives and description of the development method followed during project implementation; then the theoretical framework where tools and studied the similarities and differences with the idea we have of the application are discussed, and development tools with which they will implement the project. Then the results obtained, by defining requirements as well as an exhibition of the own tool. Finally, the validation strategy that has been followed in the development of the project and the conclusions drawn from these validations are exposed; also, it is included at the end of the project conclusions and future lines of development.

Desarrollo de frameworks con .NET

La expansión experimentada por la informática, las nuevas tecnologías e internet en los últimos años, no solo viene dada por la evolución del hardware subyacente, sino por la evolución del desarrollo de software y del crecimiento del número de desarrolladores. Este incremento ha hecho evolucionar el software de unos sistemas de gestión basados en ficheros, prácticamente sin interfaz gráfico y de unos pocos miles de líneas a grandes sistemas distribuidos multiplataforma. El desarrollo de estos grandes sistemas, requiere gran cantidad de personas involucradas en el desarrollo, y que las herramientas de desarrollo hayan crecido también para facilitar su análisis, diseño, codificación, pruebas, implantación y mantenimiento. La base de estas herramientas software las proveen las propias plataformas de desarrollo, pero la experiencia de los desarrolladores puede aportar un sinfín de utilidades y de técnicas que agilicen los desarrollos y cumplan los requisitos del software en base a la reutilización de soluciones lo suficientemente probadas y optimizadas. Dichas herramientas se agrupan ordenadamente, creando así frameworks personalizados, con herramientas de todo tipo, clases, controles, interfaces, patrones de diseño, de tal manera que se dan soluciones personalizadas a un amplio número de problemas para emplearlas cuantas veces se quiera, bien marcando directrices de desarrollo mediante el uso de patrones, bien con la encapsulación de complejidades de tal modo que los desarrolladores ya dispongan de componentes que asuman cierta lógica o cierta complejidad aliviando así la fase de construcción. En este trabajo se abordan temas sobre las tecnologías base y plataformas de desarrollo para poder acometer la creación de un framework personalizado, necesidades a evaluar antes de acometerlo, y técnicas a emplear para la consecución del mismo, orientadas a la documentación, mantenimiento y extensión del framework. La exposición teórica consiste en mostrar y evaluar los requisitos para crear un framework, requisitos de la plataforma de desarrollo, y explicar cómo funcionan las grandes plataformas de desarrollo actuales, que elementos los componen y su funcionamiento, así como marcar ciertas pautas de estructuración y nomenclatura que el desarrollo de un framework debe contemplar para su mantenimiento y extensión. En la parte metodológica se ha usado un subconjunto de Métrica V3, ya que para el desarrollo de controles no aplica dicha metodología en su totalidad, pero contempla el catálogo de requisitos, los casos de uso, diagramas de clase, diagramas de secuencia, etc… Aparte de los conceptos teóricos, se presenta un caso práctico con fines didácticos de cómo parametrizar y configurar el desarrollo bajo la plataforma .NET. Dicho caso práctico consiste en la extensión de un control de usuario genérico de la plataforma .NET, de tal modo que se aplican conceptos más allá del hecho de crear funciones como las funcionalidades que puede brindar un API. Conceptos sobre como extender y modificar controles ya existentes, que interactúan por medio de eventos con otros controles, con vistas a que ese nuevo control forme parte de una biblioteca de controles de usuario personalizados ampliamente divulgada. Los controles de usuario son algo que no solo tienen una parte funcional, sino que también tienen una parte visual, y definiciones funcionales distintas de las típicas del software de gestión, puesto que han de controlar eventos, visualizaciones mientras se dan estos eventos y requisitos no funcionales de optimización de rendimiento, etc… Para el caso práctico se toma como herramienta la plataforma de desarrollo .Net Framework, en todas sus versiones, ya que el control a extender es el control ListView y hacerlo editable. Este control está presente en todas las versiones de .NET framework y con un alto grado de reutilización. Esta extensión muestra además como se puede migrar fácilmente este tipo de extensiones sobre todos los frameworks. Los entornos de desarrollo usados son varias versiones de Visual Studio para el mostrar dicha compatibilidad, aunque el desarrollo que acompaña este documento esté realizado sobre Visual Studio 2013. ABSTRACT The expansion in computer science, new technologies and the Internet in recent years, not only is given by the evolution of the underlying hardware, but for the evolution of software development and the growing number of developers. This increase has evolved software from management systems based on files almost without graphical interface and a few thousand of code lines, to large multiplatform distributed systems. The development of these large systems, require lots of people involved in development, and development tools have also grown to facilitate analysis, design, coding, testing, deployment and maintenance. The basis of these software tools are providing by their own development platforms, but the experience of the developers can bring a lot of utilities and techniques to speed up developments and meet the requirements of software reuse based on sufficiently proven solutions and optimized. These tools are grouped neatly, creating in this way custom frameworks, with tools of all types, classes, controls, interfaces, design patterns,… in such a way that they provide customized solutions to a wide range of problems to use them many times as you want to occur, either by dialing development guidelines by using patterns or along with the encapsulation of complexities, so that developers already have components that take some logic or some complexity relieving the construction phase. This paper cover matters based on technologies and development platforms to undertake the creation of a custom framework, needs to evaluate before rush it and techniques to use in order to achieve it, a part from techniques oriented to documentation, maintenance and framework extension. The theoretical explanation consists in to demonstrate and to evaluate the requirements for creating a framework, development platform requirements, and explain how large current development platforms work, which elements compose them and their operation work, as well as mark certain patterns of structure and nomenclature that the development of a framework should include for its maintenance and extension. In the methodological part, a subset of Métrica V3 has been used, because of, for the development of custom controls this methodology does not apply in its entirety, but provides a catalogue of requirements, use cases, class diagrams, sequence diagrams, etc ... Apart from the theoretical concepts, a study case for teaching purposes about how to parameterize and configure the development under the .NET platform is presented. This study case involves the extension of a generic user control of the .NET platform, so that concepts apply beyond the fact of creating functions as the functionalities that can provide an API. Concepts on how to extend and modify existing controls that interact through events with other controls, overlooking that new control as a part of a custom user controls library widely publicized. User controls are something that not only have a functional part, but also have a visual part, and various functional definitions of typical management software, since that they have to control events, visualizations while these events are given and not functional of performance optimization requirements, etc ... For the study case the development platform .Net Framework is taken as tool, in all its versions, considering that control to extend is the ListView control and make it editable. This control is present in all versions of .NET framework and with a high degree of reuse. This extension also shows how you can easily migrate these extensions on all frameworks. The used development environments are several versions of Visual Studio to show that compatibility, although the development that accompanies this document is done on Visual Studio 2013.

Mobile Web applications

This document presents the work that was elaborated at the company Present Technologies as part of the academic discipline Internship/Industrial Project for the Master’s degree in Informatics and Systems, Software Development branch, at Instituto Superior de Engenharia de Coimbra. The area of the mobile web applications has grown exponentially over the last few years turning it into a very dynamic field where new development platforms and frameworks are constantly emerging. Thus, the internship consisted in the study of two new mobile operating systems, Tizen and Firefox OS, as well as two frameworks for packaging of mobile web applications – Adobe PhoneGap and Appcelerator Titanium. These platforms are in the direct interest of Present Technology since it pretends to use them in its future projects in general and in the Phune Gaming project in particular. Since Television is one of the Present Technologies’ business areas, during the course of the internship it was decided to perform additionally a study of two Smart TV platforms, namely Samsung Smart TV and Opera TV, which was considered as a valuable knowledge for the company. For each of the platforms was performed a study about its architecture, supported standards and the development tools that are provided, nevertheless the focus was on the applications and for this reason a practical case study was conducted. The case studies consisted in the creation of a prototype or packaging of an application, for the case of the packaging tools, in order to prove the feasibility of the applications for the Present Technologies’ needs. The outcome of the work performed during the internship is that it raised the awareness of Present Technology of the studied platforms, providing it with prototypes and written documentation for the platforms’ successful usage in future projects.

Cloud Stratus: uma plataforma de middleware para desenvolvimento de aplicações em nuvem

Cloud Computing is a paradigm that enables the access, in a simple and pervasive way, through the network, to shared and configurable computing resources. Such resources can be offered on demand to users in a pay-per-use model. With the advance of this paradigm, a single service offered by a cloud platform might not be enough to meet all the requirements of clients. Ergo, it is needed to compose services provided by different cloud platforms. However, current cloud platforms are not implemented using common standards, each one has its own APIs and development tools, which is a barrier for composing different services. In this context, the Cloud Integrator, a service-oriented middleware platform, provides an environment to facilitate the development and execution of multi-cloud applications. The applications are compositions of services, from different cloud platforms and, represented by abstract workflows. However, Cloud Integrator has some limitations, such as: (i) applications are locally executed; (ii) users cannot specify the application in terms of its inputs and outputs, and; (iii) experienced users cannot directly determine the concrete Web services that will perform the workflow. In order to deal with such limitations, this work proposes Cloud Stratus, a middleware platform that extends Cloud Integrator and offers different ways to specify an application: as an abstract workflow or a complete/partial execution flow. The platform enables the application deployment in cloud virtual machines, so that several users can access it through the Internet. It also supports the access and management of virtual machines in different cloud platforms and provides services monitoring mechanisms and assessment of QoS parameters. Cloud Stratus was validated through a case study that consists of an application that uses different services provided by different cloud platforms. Cloud Stratus was also evaluated through computing experiments that analyze the performance of its processes.

Automated Software Debugging Using Hybrid Static/Dynamic Analysis

With the increasing complexity of today's software, the software development process is becoming highly time and resource consuming. The increasing number of software configurations, input parameters, usage scenarios, supporting platforms, external dependencies, and versions plays an important role in expanding the costs of maintaining and repairing unforeseeable software faults. To repair software faults, developers spend considerable time in identifying the scenarios leading to those faults and root-causing the problems. While software debugging remains largely manual, it is not the case with software testing and verification. The goal of this research is to improve the software development process in general, and software debugging process in particular, by devising techniques and methods for automated software debugging, which leverage the advances in automatic test case generation and replay. In this research, novel algorithms are devised to discover faulty execution paths in programs by utilizing already existing software test cases, which can be either automatically or manually generated. The execution traces, or alternatively, the sequence covers of the failing test cases are extracted. Afterwards, commonalities between these test case sequence covers are extracted, processed, analyzed, and then presented to the developers in the form of subsequences that may be causing the fault. The hypothesis is that code sequences that are shared between a number of faulty test cases for the same reason resemble the faulty execution path, and hence, the search space for the faulty execution path can be narrowed down by using a large number of test cases. To achieve this goal, an efficient algorithm is implemented for finding common subsequences among a set of code sequence covers. Optimization techniques are devised to generate shorter and more logical sequence covers, and to select subsequences with high likelihood of containing the root cause among the set of all possible common subsequences. A hybrid static/dynamic analysis approach is designed to trace back the common subsequences from the end to the root cause. A debugging tool is created to enable developers to use the approach, and integrate it with an existing Integrated Development Environment. The tool is also integrated with the environment's program editors so that developers can benefit from both the tool suggestions, and their source code counterparts. Finally, a comparison between the developed approach and the state-of-the-art techniques shows that developers need only to inspect a small number of lines in order to find the root cause of the fault. Furthermore, experimental evaluation shows that the algorithm optimizations lead to better results in terms of both the algorithm running time and the output subsequence length.

An aspect-oriented framework for orthogonal persistence

The life cycle of software applications in general is very short and with extreme volatile requirements. Within these conditions programmers need development tools and techniques with an extreme level of productivity. We consider the code reuse as the most prominent approach to solve that problem. Our proposal uses the advantages provided by the Aspect-Oriented Programming in order to build a reusable framework capable to turn both programmer and application oblivious as far as data persistence is concerned, thus avoiding the need to write any line of code about that concern. Besides the benefits to productivity, the software quality increases. This paper describes the actual state of the art, identifying the main challenge to build a complete and reusable framework for Orthogonal Persistence in concurrent environments with support for transactions. The present work also includes a successfully developed prototype of that framework, capable of freeing the programmer of implementing any read or write data operations. This prototype is supported by an object oriented database and, in the future, will also use a relational database and have support for transactions.

Pervasive Software Visualizations

A picture tells a thousand words. We all know that. Then why are our development tools showing mainly text with so much obstinacy? Even when visualizations do make it into our tools, they typically do not make it past the periphery. Something is deeply wrong. We argue that visualizations must become pervasive in software development, and to accommodate this goal, the integrated development environments must change significantly.

Projeção mapeada interativa em discos de vinil : diálogos multissensoriais tecnológicos

Dissertação (mestrado)—Universidade de Brasília, Instituto de Artes, Programa de Pós-Graduação em Arte, 2016.