Twelve factors influencing sustainable recycling of municipal solid waste in developing countries

Sustainable management of solid waste is a global concern, as exemplified by the United Nations Millennium Development Goals (MDG) that 191 member states support. The seventh MDG indirectly advocates for municipal solid waste management (MSWM) by aiming to ensure environmental sustainability into countries’ policies and programs and reverse negative environmental impact. Proper MSWM will likely result in relieving poverty, reducing child mortality, improving maternal health, and preventing disease, which are MDG goals one, four, five, and six, respectively (UNMDG, 2005). Solid waste production is increasing worldwide as the global society strives to obtain a decent quality of life. Several means exist in which the amount of solid waste going to a landfill can be reduced, such as incineration with energy production, composting of organic wastes, and material recovery through recycling, which are all considered sustainable methods by which to manage MSW. In the developing world, composting is already a widely-accepted method to reduce waste fated for the landfill, and incineration for energy recovery can be a costly capital investment for most communities. Therefore, this research focuses on recycling as a solution to the municipal solid waste production problem while considering the three dimensions of sustainability environment, society, and economy. First, twenty-three developing country case studies were quantitatively and qualitatively examined for aspects of municipal solid waste management. The municipal solid waste (MSW) generation and recovery rates, as well as the composition were compiled and assessed. The average MSW generation rate was 0.77 kg/person/day, with recovery rates varying from 5 – 40%. The waste streams of nineteen of these case studies consisted of 0 – 70% recyclable material and 17 – 80% organic material. All twenty-three case studies were analyzed qualitatively by identifying any barriers or incentives to recycling, which justified the creation of twelve factors influencing sustainable municipal solid waste management (MSWM) in developing countries. The presence of regulations, enforcement of laws, and use of incentive schemes constitutes the first factor, Government Policy. Cost of MSWM operations, the budget allocated to MSWM by local to national governments, as well as the stability and reliability of funds comprise the Government Finances factor influencing recycling in the third world. Many case studies indicated that understanding features of a waste stream such as the generation and recovery rates and composition is the first measure in determining proper management solutions, which forms the third factor Waste Characterization. The presence and efficiency of waste collection and segregation by scavengers, municipalities, or private contractors was commonly addressed by the case studies, which justified Waste Collection and Segregation as the fourth factor. Having knowledge of MSWM and an understanding of the linkages between human behavior, waste handling, and health/sanitation/environment comprise the Household Education factor. Individuals’ income influencing waste handling behavior (e.g., reuse, recycling, and illegal dumping), presence of waste collection/disposal fees, and willingness to pay by residents were seen as one of the biggest incentives to recycling, which justified them being combined into the Household Economics factor. The MSWM Administration factor was formed following several references to the presence and effectiveness of private and/or public management of waste through collection, recovery, and disposal influencing recycling activity. Although the MSWM Personnel Education factor was only recognized by six of the twenty-two case studies, the lack of trained laborers and skilled professionals in MSWM positions was a barrier to sustainable MSWM in every case but one. The presence and effectiveness of a comprehensive, integrative, long-term MSWM strategy was highly encouraged by every case study that addressed the tenth factor, MSWM Plan. Although seemingly a subset of private MSWM administration, the existence and profitability of market systems relying on recycled-material throughput, involvement of small businesses, middlemen, and large industries/exporters is deserving of the factor Local Recycled-Material Market. Availability and effective use of technology and/or human workforce and the safety considerations of each were recurrent barriers and incentives to recycling to warrant the Technological and Human Resources factor. The Land Availability factor takes into consideration land attributes such as terrain, ownership, and development which can often times dictate MSWM. Understanding the relationships among the twelve factors influencing recycling in developing countries, made apparent the collaborative nature required of sustainable MSWM. Factors requiring the greatest collaborative inputs include waste collection and segregation, MSWM plan, and local recycled-material market. Aligning each factor to the societal, environmental, and economic dimensions of sustainability revealed the motives behind the institutions contributing to each factor. A correlation between stakeholder involvement and sustainability existed, as supported by the fact that the only three factors driven by all three dimensions of sustainability were the same three that required the greatest collaboration with other factors. With increasing urbanization, advocating for improved health for all through the MDG, and changing consumption patterns resulting in increasing and more complex waste streams, the utilization of the collaboration web offered by this research is ever needed in the developing world. Through its use, the institutions associated with each of the twelve factors can achieve a better understanding of the collaboration necessary and beneficial for more sustainable MSWM.

TANK SIZING AND OPTIMIZING LOOP PLACEMENT IN A BRANCHED WATER DISTRIBUTION SYSTEM

More than eighteen percent of the world’s population lives without reliable access to clean water, forced to walk long distances to get small amounts of contaminated surface water. Carrying heavy loads of water long distances and ingesting contaminated water can lead to long-term health problems and even death. These problems affect the most vulnerable populations, women, children, and the elderly, more than anyone else. Water access is one of the most pressing issues in development today. Boajibu, a small village in Sierra Leone, where the author served in Peace Corps for two years, lacks access to clean water. Construction of a water distribution system was halted when a civil war broke out in 1992 and has not been continued since. The community currently relies on hand-dug and borehole wells that can become dirty during the dry season, which forces people to drink contaminated water or to travel a far distance to collect clean water. This report is intended to provide a design the system as it was meant to be built. The water system design was completed based on the taps present, interviews with local community leaders, local surveying, and points taken with a GPS. The design is a gravity-fed branched water system, supplied by a natural spring on a hill adjacent to Boajibu. The system’s source is a natural spring on a hill above Boajibu, but the flow rate of the spring is unknown. There has to be enough flow from the spring over a 24-hour period to meet the demands of the users on a daily basis, or what is called providing continuous flow. If the spring has less than this amount of flow, the system must provide intermittent flow, flow that is restricted to a few hours a day. A minimum flow rate of 2.1 liters per second was found to be necessary to provide continuous flow to the users of Boajibu. If this flow is not met, intermittent flow can be provided to the users. In order to aid the construction of a distribution system in the absence of someone with formal engineering training, a table was created detailing water storage tank sizing based on possible source flow rates. A builder can interpolate using the source flow rate found to get the tank size from the table. However, any flow rate below 2.1 liters per second cannot be used in the table. In this case, the builder should size the tank such that it can take in the water that will be supplied overnight, as all the water will be drained during the day because the users will demand more than the spring can supply through the night. In the developing world, there is often a problem collecting enough money to fund large infrastructure projects, such as a water distribution system. Often there is only enough money to add only one or two loops to a water distribution system. It is helpful to know where these one or two loops can be most effectively placed in the system. Various possible loops were designated for the Boajibu water distribution system and the Adaptive Greedy Heuristic Loop Addition Selection Algorithm (AGHLASA) was used to rank the effectiveness of the possible loops to construct. Loop 1 which was furthest upstream was selected because it benefitted the most people for the least cost. While loops which were further downstream were found to be less effective because they would benefit fewer people. Further studies should be conducted on the water use habits of the people of Boajibu to more accurately predict the demands that will be placed on the system. Further population surveying should also be conducted to predict population change over time so that the appropriate capacity can be built into the system to accommodate future growth. The flow at the spring should be measured using a V-notch weir and the system adjusted accordingly. Future studies can be completed adjusting the loop ranking method so that two users who may be using the water system for different lengths of time are not counted the same and vulnerable users are weighted more heavily than more robust users.

Can the World Trade Organization Ensure that International Food Aid is Genuine?

The Doha Round negotiation mandate proposes to minimise trade distortions and commercial displacement under the cover of international food aid, without preventing genuine food aid from reaching people in need. This paper presents problematic aspects of food aid for trade and competition, an overview of the international governance of food aid, and the present rules on food aid embodied in Article 10.4 of the WTO Agreement on Agriculture. The latest available Draft Modalities for Agriculture (December 2008) are seen as an only halfway successful implementation of the Doha mandate. A new text with better targeted disciplines and a political food aid commitment as part of the Doha Round Final Act are proposed in the conclusions.

The effects of international politics on oil-exporting developing countries

International politics affects oil trade. But does it affect the oil-exporting developing countries more? We construct a firm-level dataset for all U.S. oil-importing companies over 1986-2008 to examine how these firms respond to changes in "political distance" between the U.S. and her trading partners, measured by divergence in their UN General Assembly voting patterns. Consistent with previous macro evidence, we first show that individual firms diversify their oil imports politically, even after controlling for unobserved firm heterogeneity. We conjecture that the political pattern of oil imports from these individual firms is driven by hold-up risks, because oil trade is often associated with backward vertical FDI. To the extent that developing countries have higher hold-up risks because of their weaker institutions, the political effect on oil trade should be more significant in the developing world. We find that oil import decisions are indeed more elastic when firms import from developing countries, although the reverse is true in the short run. Our results suggest that international politics can affect oil revenue and hence long-term development in the developing world.

Assisting developing countries toward food self-reliance

Per capita food availability in the developing world has increased by 20% since the early 1960s, according to the Food and Agriculture Organization, and today the world has twice as many people but 150 million fewer hungry people than in 1960. The world agricultural system has not done too bad a job over the past 35 years. It is likely that global agricultural production will continue to at least match growth in food demand over the next decade, assuming no major weather anomalies. Continued support of the Consultative Group for International Agricultural Research and programs involving U.S. universities is important to sharing knowledge about agriculture with colleagues in the developing world. This paper explores the reasons for providing agricultural development assistance, the benefits to the United States that come from doing so, and the special challenges facing the world over the next few decades.

Development of a microbicide-releasing diaphragm as an HIV prevention strategy

Contraceptive diaphragms offer a discreet method of pregnancy protection that women can use when needed with no side effects. Incorporating antiretroviral HIV microbicides into such devices may also provide protection against HIV infection. The paper gives a brief outline of the work being conducted by PATH, CONRAD and QUB on the development of a microbicide-releasing SILCS diaphragm. The design, engineering and manufacturing challenges that have been encountered will be discussed, as well as the potential impact such a device could have in the developing world.

An exploratory study of management accounting and control systems in a developing country

This thesis reports on the results of case studies in four commercial banks in Nigeria. The study focuses how management accounting and control systems (MCS) operate in the four banks. The study is motivated by the dearth of literature on management accounting practices in the developing world in general and in Nigeria in specific. The case study approach adopted in conducting the research was useful in exploring the dynamics of the MCS in the organisations. Data was gathered from two sources. First, semi-structured interviews were conducted with managers at the head office, regional office and branches of each bank. The participants were selected from different backgrounds and managerial levels to provide broader understanding of the operations of the MCS. Second, various internal and external documents were reviewed to provide supporting evidence for the interview results. New institutional sociology (NIS) provided the theoretical framework to understand the results. NIS provided explanations for how the MCS in the four banks were shaped by diverse external and internal factors. The key factors identified as shaping the operations of the MCS were the need to comply with the regulatory environment (coercive isomorphism), the need to maintain social and cultural support (normative isomorphism) and the need to imitate successful organisations in order to appear legitimate (mimetic isomorphism). The study also examines the interplay between the institutional forces, market forces and infra-organisational power relations. This analysis is necessary to overcome the criticism of NIS that it downplays the role of market forces, agency and intra-organisational relations. The findings of the study have implications for understanding the operations of MCS in the developing world.

Sustainable rural development through alternative economic networks: Redefining relations in the commodity chain for export vegetables in western Guatemala

The current research considers the capacity of a local organic food system for producer and consumer empowerment and sustainable development outcomes in western Guatemala. Many have argued that the forging of local agricultural networks linking farmers, consumers, and supporting institutions is an effective tool for challenging the negative economic, environmental, and sociopolitical impacts associated with industrial models of global food production. But does this work in the context of agrarian development in the developing world? Despite the fact that there is extensive literature concerning local food system formation in the global north, there remains a paucity of research covering how the principles of local food systems are being integrated into agricultural development projects in developing countries. My work critically examines claims to agricultural sustainability and actor empowerment in a local organic food system built around non-traditional agricultural crops in western Guatemala. Employing a mixed methods research design involving twenty months of participant observation, in-depth interviewing, surveying, and a self-administered questionnaire, the project evaluates the sustainability of this NGO-led development initiative and local food movement along several dimensions. Focusing on the unique economic and social networks of actors and institutions at each stage of the commodity chain, this research shows how the growth of an alternative food system continues to be shaped by context specific processes, politics, and structures of conventional food systems. Further, it shows how the specifics of context also produce new relationships of cooperation and power in the development process. Results indicate that structures surrounding agrarian development in the Guatemalan context give rise to a hybrid form of development that at the same time contests and reinforces conventional models of food production and consumption. Therefore, participation entails a host of compromises and tradeoffs that result in mixed successes and setbacks, as actors attempt to refashion conventional commodity chains through local food system formation.^

The Argentine Dilemma: “Vulture Funds” and the Risks Posed to Developing Economies

Post-crisis Argentina is a case study of crisis management through debt restructuring. This article examines how Argentina negotiated the external debt in the wake of the sovereign default in December 2001 and now confronts challenges posed by holdout creditors—the so called “vulture funds”. It argues that debt restructuring has put a straitjacket on the national economy, making it virtually impossible for healthy growth short of a break with the international economic order. While Argentina has successfully restructured a $95 billion debt with an unprecedented “hair cut” (around 70% reduction in “net value of debt”), a sustainable growth appears out of reach as long as reliance on the government debt market prevails. In this cycle, the transmission belt of financial crisis to developing countries is characterized by the entry of highly speculative players such as hedge funds, conflicts of interests embedded in “sovereign debt restructuring” (SDR) and vulnerabilities associated with “emerging market debt”.

Creating New Design-Build-Test Experiences as Outputs of Undergraduate Design-Build-Test Projects

This paper describes a methodology of using individual engineering undergraduate student projects as a means of effectively and efficiently developing new Design-Build-Test (DBT) learning experiences and challenges.
A key aspect of the rationale for this approach is that it benefits all parties. The student undertaking the individual project gets an authentic experience of producing a functional artefact, which has been the result of a design process that addresses conception, design, implementation and operation. The supervising faculty member benefits from live prototyping of new curriculum content and resources with a student who is at a similar level of knowledge and experience as the intended end users of the DBT outputs. The multiple students who ultimately undertake the DBT experiences / challenges benefit from the enhanced nature of a learning experience which has been “road tested” and optimised.
To demonstrate the methodology the paper will describe a case study example of an individual project completed in 2015. This resulted in a DBT design challenge with a theme of designing a catapult for throwing table tennis balls, the device being made from components laser cut from medium density fibreboard (MDF). Further three different modes of operation will be described which use the same resource materials but operate over different timescales and with different learning outcomes, from an icebreaker exercise focused on developing team dynamics through to full DBT where students get an opportunity to experience the full impact of their design decisions by competing against other students with a catapult they have designed and built themselves.

Low‑cost origami fabrication of 3D self‑aligned hybrid microfluidic structures

[EN] 3D microfluidic device fabrication methods are normally quite expensive and tedious. In this paper, we present an easy and cheap alternative wherein thin cyclic olefin polymer (COP) sheets and pressure sensitive adhesive(PSA) were used to fabricate hybrid 3D microfluidic structures, by the Origami technique, which enables the fabrication of microfluidic devices without the need of any alignment tool. The COP and PSA layers were both cut simultaneously using a portable, low-cost plotter allowing for rapid prototyping of a large variety of designs in a single production step. The devices were then manually assembled using the Origami technique by simply combining COP and PSA layers and mild pressure. This fast fabrication method was applied, as proof of concept, to the generation of a micromixer with a 3D-stepped serpentine design made of ten layers in less than 8 min. Moreover, the micromixer was characterized as a function of its pressure failure, achieving pressures of up to 1000 mbar. This fabrication method is readily accessible across a large range of potential end users, such as educational agencies (schools,universities), low-income/developing world research and industry or any laboratory without access to clean room facilities, enabling the fabrication of robust, reproducible microfluidic devices.

WIPO and the Reinforcement of the Nagoya Protocol: Towards Effective Implementation of an Access and Benefit Sharing Regime for the Protection of Traditional Knowledge Associated with Genetic Resources

Traditional knowledge associated with genetic resources (TKaGRs) is acknowledged as a valuable resource. Its value draws from economic, social, cultural, and innovative uses. This value places TK at the heart of competing interests as between indigenous peoples who hold it and depend on it for their survival, and profitable industries which seek to exploit it in the global market space. The latter group seek, inter alia, to advance and maintain their global competitiveness by exploiting TKaGRs leads in their research and development activities connected with modern innovation. Biopiracy remains an issue of central concern to the developing world and has emerged in this context as a label for the inequity arising from the misappropriation of TKaGRs located in the South by commercial interests usually located in the North. Significant attention and resources are being channeled at global efforts to design and implement effective protection mechanisms for TKaGRs against the incidence of biopiracy. The emergence and recent entry into force of the Nagoya Protocol offers the latest example of a concluded multilateral effort in this regard. The Nagoya Protocol, adopted on the platform of the Convention on Biological Diversity (CBD), establishes an open-ended international access and benefit sharing (ABS) regime which is comprised of the Protocol as well as several complementary instruments. By focusing on the trans-regime nature of biopiracy, this thesis argues that the intellectual property (IP) system forms a central part of the problem of biopiracy, and so too to the very efforts to implement solutions, including through the Nagoya Protocol. The ongoing related work within the World Intellectual Property Organization (WIPO), aimed at developing an international instrument (or a series of instruments) to address the effective protection of TK, constitutes an essential complementary process to the Nagoya Protocol, and, as such, forms a fundamental element within the Nagoya Protocol’s evolving ABS regime-complex. By adopting a third world approach to international law, this thesis draws central significance from its reconceptualization of biopiracy as a trans-regime concept. By construing the instrument(s) being negotiated within WIPO as forming a central component part of the Nagoya Protocol, this dissertation’s analysis highlights the importance of third world efforts to secure an IP-based reinforcement to the Protocol for the effective eradication of biopiracy.

The role of quantum confinement and crystalline structure on excitonic lifetimes in silicon nanoclusters

The emission energy dependence of the photoluminescence (PL) decay rate at room temperature has been studied in Si nanoclusters (Si-ncl) embedded in Si oxide matrices obtained by thermal annealing of substoichiometric Si oxide layers Si(y)O(1-y), y=(0.36,0.39,0.42), at various annealing temperatures (T(a)) and gas atmospheres. Raman scattering measurements give evidence for the formation of amorphous Si-ncl at T(a)=900 degrees C and of crystalline Si-ncl for T(a)=1000 degrees C and 1100 degrees C. For T(a)=1100 degrees C, the energy dispersion of the PL decay rate does not depend on sample fabrication conditions and follows previously reported behavior. For lower T(a), the rate becomes dependent on fabrication conditions and less energy dispersive. The effects are attributed to exciton localization and decoherence leading to the suppression of quantum confinement and the enhancement of nonradiative recombination in disordered and amorphous Si-ncl. (C) 2010 American Institute of Physics. [doi: 10.1063/1.3457900]

Biofuels and Sustainable Energy Development in Brazil

Through the assessment of three decades of the Alcohol Program in Brazil, the paper shows that adequate public policies regarding biomass production can deliver direct benefits like energy security improvement, foreign exchange savings, and local employment generation, reduced urban air pollution and avoided CO(2) emissions. Moreover, the paper shows that Brazilian produced ethanol has faced economies of scale, technical progress and productivity gains and is no longer dependent on subsidies to be competitive. The paper also examines the potential in Brazil for fostering other biofuels, namely biodiesel obtained from vegetable oils, as well as their implications on sustainable energy development. (C) 2011 Elsevier Ltd. All rights reserved.