Mudanças no âmbito da testagem anti-HIV no Brasil entre 1998 e 2005

OBJETIVO: Analisar mudanças na realização de teste anti-HIV, as razões alegadas entre as pessoas que foram ou não testadas e o recebimento de aconselhamento. MÉTODOS: Estudos transversais conduzidos com homens e mulheres de 16 a 65 anos, com amostras representativas do Brasil urbano em 1998 (n=3.600) e 2005 (n=5.040). Características sociodemográficas, sexuais, reprodutivas e de experiências de vida e saúde foram consideradas na análise. A avaliação das possíveis diferenças nas distribuições das variáveis baseou-se nos testes qui-quadrado de Pearson e F design-based (±<5%). RESULTADOS: Em 1998, 20,2% dos entrevistados haviam realizado o teste e 33,6% em 2005. Foram testadas 60% das mulheres na faixa 25-34 anos, mas as que iniciaram a vida sexual antes dos 16 anos e reportaram quatro ou mais parceiros sexuais nos cinco anos anteriores à entrevista foram menos testadas. Não se observou aumento significativo da testagem entre homens, exceto para os de 55-65 anos, renda per capita entre 1-3 e 5-10 salários mínimos, aposentados, protestantes históricos e adeptos de cultos afro-brasileiros, moradores da região Norte/Nordeste e os que declararam parceria homo/bissexual ou não tiveram relações sexuais nos cinco anos anteriores à entrevista. Não aumentou a freqüência de testagem entre pessoas auto-avaliadas como sob alto risco para o HIV. Entre as mulheres, a freqüência de testagem pré-natal aumentou e a testagem por trabalho diminuiu entre os homens. Em 2005, metade dos testados não recebeu orientação antes ou após o teste. CONCLUSÕES: Houve expansão desigual na testagem, atingindo principalmente mulheres em idade reprodutiva, adultas e pessoas com melhores condições sociais. A testagem parece estar aumentando no País sem a devida atenção à decisão autônoma das pessoas e sem o provimento de maior e melhor oferta de aconselhamento

The need for adequate ethical guidelines for qualitative health research

O artigo discute a adequação de aplicar a Resolução 196/961 do Conselho Nacional de Saúde - CNS, às pesquisas qualitativas em saúde, que se baseiam em paradigmas não positivistas. Nestas pesquisas, freqüentemente as decisões sobre a pesquisa são tomadas conjuntamente com a comunidade em estudo. Há a preocupação de favorecer a justiça e a mudança social. E, uma vez que a subjetividade pode ser considerada seu instrumento privilegiado, busca-se o balanço entre objetividade e subjetividade, e discute-se como superar a visão do pesquisador. Estudamos o âmbito de aplicação e a concepção de pesquisa presentes nas diretrizes éticas internacionais e brasileiras. Verificamos que elas adotam uma concepção positivista de pesquisa, que prevê: teste de hipótese, definição prévia de todos os procedimentos pelo pesquisador e neutralidade do pesquisador e do conhecimento produzido. Serão apresentadas algumas características das pesquisas qualitativas, as implicações éticas da maneira como a pesquisa qualitativa é concebida nos paradigmas não positivistas e um breve histórico dos documentos sobre ética em pesquisa. Concluímos que não é adequado analisar estas pesquisas com base nestes documentos e sugerimos a elaboração de diretrizes específicas

O difícil acesso a serviços de média complexidade do SUS

O acesso aos serviços de média complexidade tem sido apontado, por gestores e pesquisadores, como um dos entraves para a efetivação da integralidade do SUS. Este artigo teve o objetivo de avaliar mecanismos utilizados pela gestão do SUS, no município de São Paulo, para garantir acesso à assistência de média complexidade, durante o período de 2005 a 2008. Optou-se pela estratégia de estudo de caso, utilizando as seguintes fontes de evidência: entrevistas com gestores; grupo focal com usuários e observação participante. Utilizouas técnica de análise temática, a partir do referencial teórico da integralidade da assistência, na dimensão da organização de serviços. Buscou-se descrever os caminhos percorridos pelos usuários para acessar os serviços da média complexidade, a partir da visão dos gestores e dos próprios usuários. A média complexidade foi identificada, pelos gestores, como o "gargalo" do SUS e um dos principais obstáculos para a construção da integralidade. Para enfrentar essa situação, o gestor municipal investiu na informatização dos serviços, como medida isolada e, ainda, sem considerar a necessidade dos usuários. Sendo assim, essa incorporação tecnológica teve pouco impacto na melhoria do acesso, o que se confirmou no relato dos usuários. Discute-se que para o enfrentamento de um problema tão complexo são necessárias ações articuladas, tanto no âmbito da política de saúde, quanto da organização dos serviços, bem como a (re)organização do processo de trabalho em todos os níveis do sistema de saúde

Atenção básica de saúde e a assistência em Hanseníase em serviços de saúde de um município do Estado de São Paulo

Este é um estudo descritivo desenvolvido em um município do Estado de São Paulo. Objetivo: identificar e caracterizar as ações do Programa de Controle da Hanseníase nos serviços de saúde municipais. Metodologia: entrevistas gravadas com gestor municipal de saúde e profissionais da assistência à hanseníase. Resultados: a política pública municipal em saúde prioriza o desenvolvimento da atenção básica com ênfase na saúde pública. As ações são realizadas por profissionais capacitados e experientes em hanseníase. Ve rificou-se a não realização da busca ativa dos casos, necessária para o real conhecimento da situação epidemiológica, e das ações de educação em saúde, importante para a redução do estigma e aproximação do sujeito à nova situação de vida e enfrentamento de limitações

Design and characterization of bridged loop-gap resonators for use in electron paramagnetic resonance measurements

This paper revisits the design of L and S band bridged loop-gap resonators (BLGRs) for electron paramagnetic resonance applications. A novel configuration is described and extensively characterized for resonance frequency and quality factor as a function of the geometrical parameters of the device. The obtained experimental results indicate higher values of the quality factor (Q) than previously reported in the literature, and the experimental analysis data should provide useful guidelines for BLGR design.

Design methodology for multi-pumped discrete Raman amplifiers: case-study employing photonic crystal fibers

This paper proposes a new design methodology for discrete multi-pumped Raman amplifier. In a multi-objective optimization scenario, in a first step the whole solution-space is inspected by a CW analytical formulation. Then, the most promising solutions are fully investigated by a rigorous numerical treatment and the Raman amplification performance is thus determined by the combination of analytical and numerical approaches. As an application of our methodology we designed an photonic crystal fiber Raman amplifier configuration which provides low ripple, high gain, clear eye opening and a low power penalty. The amplifier configuration also enables to fully compensate the dispersion introduced by a 70-km singlemode fiber in a 10 Gbit/s system. We have successfully obtained a configuration with 8.5 dB average gain over the C-band and 0.71 dB ripple with almost zero eye-penalty using only two pump lasers with relatively low pump power. (C) 2009 Optical Society of America

Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materials through factorial design of experiment

In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.

Multidisciplinary optimization of a catamaran's hydrofoil design with dynamic response surface and distributive processing

This paper presents a rational approach to the design of a catamaran's hydrofoil applied within a modern context of multidisciplinary optimization. The approach used includes the use of response surfaces represented by neural networks and a distributed programming environment that increases the optimization speed. A rational approach to the problem simplifies the complex optimization model; when combined with the distributed dynamic training used for the response surfaces, this model increases the efficiency of the process. The results achieved using this approach have justified this publication.

Análise técnica e econômica de prestadores de serviços na colheita florestal

The objective of this Study was to describe the financial conditions of forestry contractors, concerning life quality aspects, condition of work and equipments, operational costs, and economic credit to invest in new technologies. Five companies had been analyzed, with an annual income between US$ 400,000.00 and US$ 1,720,000.00, with an average of US$ 950,000.00. The number of employees varied between 33 and 181, and the companies were classified in terms of size as: one small, two average, and two big. The main difficulties to invest in new machines were high financial taxes, more than 12% an year, and a lack of long term contracts to guarantee the payment capability. It was observed that the contractors did not consider the capital remuneration and a correct depreciation of machines, resulting in an average machine life higher than 10 years. The final conclusions were that the costs were above the paid values for the services, when computed the depreciation and capital remuneration, with negative results In the financial analyzes of three companies. Finally, the mechanization process increased the workers life quality, however, the annual income was around US$ 2,112.00 per worker, approximately 39% lower than the average Brazilian population.

A oferta de serviços de informação por situação de vida em sítios Web de bibliotecas virtuais: em busca da qualidade no atendimento

With the advent and development of technology, mainly in the Internet, more and more electronic services are being offered to customers in all areas of business, especially in the offering of information services, as in virtual libraries. This article proposes a new opportunity to provide services to virtual libraries customers, presenting a methodology for the implementation of electronic services oriented by these customers' life situations. Through analytical observations of some national virtual libraries sites, it could be identified that the offer of services considering life situations and relationship interest situations can promote the service to their customers, providing greater satisfaction and, consequently, improving quality in the offer of information services. The visits to those sites and the critical analysis of the data collected during these visits, supported by bibliographic researches results, have enabled the description of this methodology, concluding that the provision of services on an isolated way or in accordance with the user's profile on sites of virtual libraries is not always enough to ensure the attendance to the needs and expectations of its customers, which suggests the offering of these services considering life situations and relationship interest situations as a complement that adds value to the business of virtual library. This becomes relevant when indicates new opportunities to provide virtual libraries services with quality, serving as a guide to the information providers managers, enabling the offering of new means to access information services by such customers, looking for pro - activity and services integration, in order to solve definitely real problems.

Hypotheses, rationale, design, and methods for prognostic evaluation in type 2 diabetic patients with angiographically normal coronary arteries. The MASS IV-DM Trial

Background: The MASS IV-DM Trial is a large project from a single institution, the Heart Institute (InCor), University of Sao Paulo Medical School, Brazil to study ventricular function and coronary arteries in patients with type 2 diabetes mellitus. Methods/Design: The study will enroll 600 patients with type 2 diabetes who have angiographically normal ventricular function and coronary arteries. The goal of the MASS IV-DM Trial is to achieve a long-term evaluation of the development of coronary atherosclerosis by using angiograms and coronary-artery calcium scan by electron-beam computed tomography at baseline and after 5 years of follow-up. In addition, the incidence of major cardiovascular events, the dysfunction of various organs involved in this disease, particularly microalbuminuria and renal function, will be analyzed through clinical evaluation. In addition, an effort will be made to investigate in depth the presence of major cardiovascular risk factors, especially the biochemical profile, metabolic syndrome inflammatory activity, oxidative stress, endothelial function, prothrombotic factors, and profibrinolytic and platelet activity. An evaluation will be made of the polymorphism as a determinant of disease and its possible role in the genesis of micro- and macrovascular damage. Discussion: The MASS IV-DM trial is designed to include diabetic patients with clinically suspected myocardial ischemia in whom conventional angiography shows angiographically normal coronary arteries. The result of extensive investigation including angiographic follow-up by several methods, vascular reactivity, pro-thrombotic mechanisms, genetic and biochemical studies may facilitate the understanding of so-called micro- and macrovascular disease of DM.

Design and fabrication of microcavity-array superhydrophobic surfaces

We have modeled, fabricated, and characterized superhydrophobic surfaces with a morphology formed of periodic microstructures which are cavities. This surface morphology is the inverse of that generally reported in the literature when the surface is formed of pillars or protrusions, and has the advantage that when immersed in water the confined air inside the cavities tends to expel the invading water. This differs from the case of a surface morphology formed of pillars or protrusions, for which water can penetrate irreversibly among the microstructures, necessitating complete drying of the surface in order to again recover its superhydrophobic character. We have developed a theoretical model that allows calculation of the microcavity dimensions needed to obtain superhydrophobic surfaces composed of patterns of such microcavities, and that provides estimates of the advancing and receding contact angle as a function of microcavity parameters. The model predicts that the cavity aspect ratio (depth-to-diameter ratio) can be much less than unity, indicating that the microcavities do not need to be deep in order to obtain a surface with enhanced superhydrophobic character. Specific microcavity patterns have been fabricated in polydimethylsiloxane and characterized by scanning electron microscopy, atomic force microscopy, and contact angle measurements. The measured advancing and receding contact angles are in good agreement with the predictions of the model. (C) 2010 American Institute of Physics. [doi:10.1063/1.3466979]

Design and fabrication of superhydrophobic surfaces formed of microcavities

We have developed a theoretical model for superhydrophobic surfaces that are formed from an extended array of microcavities, and have fabricated specific microcavity patterns to form superhydrophobic surfaces of the kind modeled. The model shows that the cavity aspect ratio can be significantly less than unity, indicating that the microcavities do not need to be deep in order to enhance the superhydrophobic character of the surface. We have fabricated surfaces of this kind and measured advancing contact angle as high as 153 degrees, in agreement with predictions of the model.

Design of 1D and 2D molecule-based magnets with the ligand 4,5-dimethyl-1,2-phenylenebis(oxamato)

Three new bimetallic oxamato-based magnets with the proligand 4,5-dimethyl-1,2-phenylenebis-(oxamato) (dmopba) were synthesized using water or dimethylsulfoxide (DMSO) as solvents. Single crystal X-ray diffraction provided structures for two of them: [MnCu(dmopba)(H(2)O)(3)]n center dot 4nH(2)O (1) and [MnCu(dmopba)(DMSO)(3)](n center dot)nDMSO (2). The crystalline structures for both 1 and 2 consist of linearly ordered oxamato-bridged Mn(II)Cu(II) bimetallic chains. The magnetic characterization revealed a typical behaviour of ferrimagnetic chains for 1 and 2. Least-squares fits of the experimental magnetic data performed in the 300-20 K temperature range led to J(MnCu) = -27.9 cm(-1), g(Cu) = 2.09 and g(Mn) = 1.98 for 1 and J(MnCu) = -30.5 cm(-1), g(Cu) = 2.09 and g(Mn) = 2.02 for 2 (H = -J(MnCu)Sigma S(Mn, i)(S(Cu, i) + S(Cu, i-1))). The two-dimensional ferrimagnetic system [Me(4)N](2n){Co(2)[Cu(dmopba)](3)}center dot 4nDMSO center dot nH(2)O (3) was prepared by reaction of Co(II) ions and an excess of [Cu(dmopba)](2-) in DMSO. The study of the temperature dependence of the magnetic susceptibility as well as the temperature and field dependences of the magnetization revealed a cluster glass-like behaviour for 3.

Electrodeposition of copper on titanium wires: Taguchi experimental design approach

Electrodeposition of thin copper layer was carried out on titanium wires in acidic sulphate bath. The influence of titanium surface preparation, cathodic current density, copper sulphate and sulphuric acid concentrations, electrical charge density and stirring of the solution on the adhesion of the electrodeposits was studied using the Taguchi statistical method. A L(16) orthogonal array with the six factors of control at two levels each and three interactions was employed. The analysis of variance of the mean adhesion response and signal-to-noise ratio showed the great influence of cathodic current density on adhesion. on the contrary, the other factors as well as the three investigated interactions revealed low or no significant effect. From this study optimized electrolysis conditions were defined. The copper electrocoating improved the electrical conductivity of the titanium wire. This shows that copper electrocoated titanium wires could be employed for both electrical purpose and mechanical reinforcement in superconducting magnets. (C) 2008 Elsevier B.V. All rights reserved.