L’analyse de composants émotionnels dans des stratégies d’apprentissage

Un certain nombre de théories pédagogiques ont été établies depuis plus de 20 ans. Elles font appel aux réactions de l’apprenant en situation d’apprentissage, mais aucune théorie pédagogique n’a pu décrire complètement un processus d’enseignement en tenant compte de toutes les réactions émotionnelles de l’apprenant. Nous souhaitons intégrer les émotions de l’apprenant dans ces processus d’apprentissage, car elles sont importantes dans les mécanismes d’acquisition de connaissances et dans la mémorisation. Récemment on a vu que le facteur émotionnel est considéré jouer un rôle très important dans les processus cognitifs. Modéliser les réactions émotionnelles d’un apprenant en cours du processus d’apprentissage est une nouveauté pour un Système Tutoriel Intelligent. Pour réaliser notre recherche, nous examinerons les théories pédagogiques qui n’ont pas considéré les émotions de l’apprenant. Jusqu’à maintenant, aucun Système Tutoriel Intelligent destiné à l’enseignement n’a incorporé la notion de facteur émotionnel pour un apprenant humain. Notre premier objectif est d’analyser quelques stratégies pédagogiques et de détecter les composantes émotionnelles qui peuvent y être ou non. Nous cherchons à déterminer dans cette analyse quel type de méthode didactique est utilisé, autrement dit, que fait le tuteur pour prévoir et aider l’apprenant à accomplir sa tâche d’apprentissage dans des conditions optimales. Le deuxième objectif est de proposer l’amélioration de ces méthodes en ajoutant les facteurs émotionnels. On les nommera des « méthodes émotionnelles ». Le dernier objectif vise à expérimenter le modèle d’une théorie pédagogique améliorée en ajoutant les facteurs émotionnels. Dans le cadre de cette recherche nous analyserons un certain nombre de théories pédagogiques, parmi lesquelles les théories de Robert Gagné, Jerome Bruner, Herbert J. Klausmeier et David Merrill, pour chercher à identifier les composantes émotionnelles. Aucune théorie pédagogique n’a mis l’accent sur les émotions au cours du processus d’apprentissage. Ces théories pédagogiques sont développées en tenant compte de plusieurs facteurs externes qui peuvent influencer le processus d’apprentissage. Nous proposons une approche basée sur la prédiction d’émotions qui est liée à de potentielles causes déclenchées par différents facteurs déterminants au cours du processus d’apprentissage. Nous voulons développer une technique qui permette au tuteur de traiter la réaction émotionnelle de l’apprenant à un moment donné au cours de son processus d’apprentissage et de l’inclure dans une méthode pédagogique. Pour atteindre le deuxième objectif de notre recherche, nous utiliserons un module tuteur apprenant basé sur le principe de l’éducation des émotions de l’apprenant, modèle qui vise premièrement sa personnalité et deuxièmement ses connaissances. Si on défini l’apprenant, on peut prédire ses réactions émotionnelles (positives ou négatives) et on peut s’assurer de la bonne disposition de l’apprenant, de sa coopération, sa communication et l’optimisme nécessaires à régler les problèmes émotionnels. Pour atteindre le troisième objectif, nous proposons une technique qui permet au tuteur de résoudre un problème de réaction émotionnelle de l’apprenant à un moment donné du processus d’apprentissage. Nous appliquerons cette technique à une théorie pédagogique. Pour cette première théorie, nous étudierons l’effet produit par certaines stratégies pédagogiques d’un tuteur virtuel au sujet de l’état émotionnel de l’apprenant, et pour ce faire, nous développerons une structure de données en ligne qu’un agent tuteur virtuel peut induire à l’apprenant des émotions positives. Nous analyserons les résultats expérimentaux en utilisant la première théorie et nous les comparerons ensuite avec trois autres théories que nous avons proposées d’étudier. En procédant de la sorte, nous atteindrons le troisième objectif de notre recherche, celui d’expérimenter un modèle d’une théorie pédagogique et de le comparer ensuite avec d’autres théories dans le but de développer ou d’améliorer les méthodes émotionnelles. Nous analyserons les avantages, mais aussi les insuffisances de ces théories par rapport au comportement émotionnel de l’apprenant. En guise de conclusion de cette recherche, nous retiendrons de meilleures théories pédagogiques ou bien nous suggérerons un moyen de les améliorer.

Theory and numerical integration of subsurface light transport

En synthèse d’images, reproduire les effets complexes de la lumière sur des matériaux transluminescents, tels que la cire, le marbre ou la peau, contribue grandement au réalisme d’une image. Malheureusement, ce réalisme supplémentaire est couteux en temps de calcul. Les modèles basés sur la théorie de la diffusion visent à réduire ce coût en simulant le comportement physique du transport de la lumière sous surfacique tout en imposant des contraintes de variation sur la lumière incidente et sortante. Une composante importante de ces modèles est leur application à évaluer hiérarchiquement l’intégrale numérique de l’illumination sur la surface d’un objet. Cette thèse révise en premier lieu la littérature actuelle sur la simulation réaliste de la transluminescence, avant d’investiguer plus en profondeur leur application et les extensions des modèles de diffusion en synthèse d’images. Ainsi, nous proposons et évaluons une nouvelle technique d’intégration numérique hiérarchique utilisant une nouvelle analyse fréquentielle de la lumière sortante et incidente pour adapter efficacement le taux d’échantillonnage pendant l’intégration. Nous appliquons cette théorie à plusieurs modèles qui correspondent à l’état de l’art en diffusion, octroyant une amélioration possible à leur efficacité et précision.

Studies on a syntax based approach for translation between structurally different languages and the development of a prototype for Malayalam to English translation

This thesis summarizes the results on the studies on a syntax based approach for translation between Malayalam, one of Dravidian languages and English and also on the development of the major modules in building a prototype machine translation system from Malayalam to English. The development of the system is a pioneering effort in Malayalam language unattempted by previous researchers. The computational models chosen for the system is first of its kind for Malayalam language. An in depth study has been carried out in the design of the computational models and data structures needed for different modules: morphological analyzer , a parser, a syntactic structure transfer module and target language sentence generator required for the prototype system. The generation of list of part of speech tags, chunk tags and the hierarchical dependencies among the chunks required for the translation process also has been done. In the development process, the major goals are: (a) accuracy of translation (b) speed and (c) space. Accuracy-wise, smart tools for handling transfer grammar and translation standards including equivalent words, expressions, phrases and styles in the target language are to be developed. The grammar should be optimized with a view to obtaining a single correct parse and hence a single translated output. Speed-wise, innovative use of corpus analysis, efficient parsing algorithm, design of efficient Data Structure and run-time frequency-based rearrangement of the grammar which substantially reduces the parsing and generation time are required. The space requirement also has to be minimised

A Compilation Strategy for Numerical Programs Based on Partial Evaluation

This work demonstrates how partial evaluation can be put to practical use in the domain of high-performance numerical computation. I have developed a technique for performing partial evaluation by using placeholders to propagate intermediate results. For an important class of numerical programs, a compiler based on this technique improves performance by an order of magnitude over conventional compilation techniques. I show that by eliminating inherently sequential data-structure references, partial evaluation exposes the low-level parallelism inherent in a computation. I have implemented several parallel scheduling and analysis programs that study the tradeoffs involved in the design of an architecture that can effectively utilize this parallelism. I present these results using the 9- body gravitational attraction problem as an example.

Stereo-Based Head Pose Tracking Using Iterative Closest Point and Normal Flow Constraint

In this text, we present two stereo-based head tracking techniques along with a fast 3D model acquisition system. The first tracking technique is a robust implementation of stereo-based head tracking designed for interactive environments with uncontrolled lighting. We integrate fast face detection and drift reduction algorithms with a gradient-based stereo rigid motion tracking technique. Our system can automatically segment and track a user's head under large rotation and illumination variations. Precision and usability of this approach are compared with previous tracking methods for cursor control and target selection in both desktop and interactive room environments. The second tracking technique is designed to improve the robustness of head pose tracking for fast movements. Our iterative hybrid tracker combines constraints from the ICP (Iterative Closest Point) algorithm and normal flow constraint. This new technique is more precise for small movements and noisy depth than ICP alone, and more robust for large movements than the normal flow constraint alone. We present experiments which test the accuracy of our approach on sequences of real and synthetic stereo images. The 3D model acquisition system we present quickly aligns intensity and depth images, and reconstructs a textured 3D mesh. 3D views are registered with shape alignment based on our iterative hybrid tracker. We reconstruct the 3D model using a new Cubic Ray Projection merging algorithm which takes advantage of a novel data structure: the linked voxel space. We present experiments to test the accuracy of our approach on 3D face modelling using real-time stereo images.

On-the-Fly Maintenance of Series-Parallel Relationships in Fork-Join Multithreaded Programs

A key capability of data-race detectors is to determine whether one thread executes logically in parallel with another or whether the threads must operate in series. This paper provides two algorithms, one serial and one parallel, to maintain series-parallel (SP) relationships "on the fly" for fork-join multithreaded programs. The serial SP-order algorithm runs in O(1) amortized time per operation. In contrast, the previously best algorithm requires a time per operation that is proportional to Tarjan’s functional inverse of Ackermann’s function. SP-order employs an order-maintenance data structure that allows us to implement a more efficient "English-Hebrew" labeling scheme than was used in earlier race detectors, which immediately yields an improved determinacy-race detector. In particular, any fork-join program running in T₁ time on a single processor can be checked on the fly for determinacy races in O(T₁) time. Corresponding improved bounds can also be obtained for more sophisticated data-race detectors, for example, those that use locks. By combining SP-order with Feng and Leiserson’s serial SP-bags algorithm, we obtain a parallel SP-maintenance algorithm, called SP-hybrid. Suppose that a fork-join program has n threads, T₁ work, and a critical-path length of T[subscript ∞]. When executed on P processors, we prove that SP-hybrid runs in O((T₁/P + PT[subscript ∞]) lg n) expected time. To understand this bound, consider that the original program obtains linear speed-up over a 1-processor execution when P = O(T₁/T[subscript ∞]). In contrast, SP-hybrid obtains linear speed-up when P = O(√T₁/T[subscript ∞]), but the work is increased by a factor of O(lg n).

La educación secundaria y sus dos dimensiones, efectos del barrio y del colegio sobre los resultados saber 11.

Resumen: Este trabajo estudia los resultados en matemáticas y lenguaje de 32000 estudiantes en la prueba saber 11 del 2008, de la ciudad de Bogotá. Este análisis reconoce que los individuos se encuentran contenidos en barrios y colegios, pero no todos los individuos del mismo barrio asisten a la misma escuela y viceversa. Con el fin de modelar esta estructura de datos se utilizan varios modelos econométricos, incluyendo una regresión jerárquica multinivel de efectos cruzados. Nuestro objetivo central es identificar en qué medida y que condiciones del barrio y del colegio se correlacionan con los resultados educacionales de la población objetivo y cuáles características de los barrios y de los colegios están más asociadas al resultado en las pruebas. Usamos datos de la prueba saber 11, del censo de colegios c600, del censo poblacional del 2005 y de la policía metropolitana de Bogotá. Nuestras estimaciones muestran que tanto el barrio como el colegio están correlacionados con los resultados en las pruebas; pero el efecto del colegio parece ser mucho más fuerte que el del barrio. Las características del colegio que están más asociadas con el resultado en las pruebas son la educación de los profesores, la jornada, el valor de la pensión, y el contexto socio económico del colegio. Las características de los barrios más asociadas con el resultado en las pruebas son, la presencia de universitarios en la UPZ, un clúster de altos niveles de educación y nivel de crimen en el barrio que se correlaciona negativamente. Los resultados anteriores fueron hallados teniendo en cuenta controles familiares y personales.

A cell by cell anisotropic adaptive mesh ALE scheme for the numerical solution of the Euler equations

In this paper a cell by cell anisotropic adaptive mesh technique is added to an existing staggered mesh Lagrange plus remap finite element ALE code for the solution of the Euler equations. The quadrilateral finite elements may be subdivided isotropically or anisotropically and a hierarchical data structure is employed. An efficient computational method is proposed, which only solves on the finest level of resolution that exists for each part of the domain with disjoint or hanging nodes being used at resolution transitions. The Lagrangian, equipotential mesh relaxation and advection (solution remapping) steps are generalised so that they may be applied on the dynamic mesh. It is shown that for a radial Sod problem and a two-dimensional Riemann problem the anisotropic adaptive mesh method runs over eight times faster.

Scalability of efficient parallel K-Means

Clustering is defined as the grouping of similar items in a set, and is an important process within the field of data mining. As the amount of data for various applications continues to increase, in terms of its size and dimensionality, it is necessary to have efficient clustering methods. A popular clustering algorithm is K-Means, which adopts a greedy approach to produce a set of K-clusters with associated centres of mass, and uses a squared error distortion measure to determine convergence. Methods for improving the efficiency of K-Means have been largely explored in two main directions. The amount of computation can be significantly reduced by adopting a more efficient data structure, notably a multi-dimensional binary search tree (KD-Tree) to store either centroids or data points. A second direction is parallel processing, where data and computation loads are distributed over many processing nodes. However, little work has been done to provide a parallel formulation of the efficient sequential techniques based on KD-Trees. Such approaches are expected to have an irregular distribution of computation load and can suffer from load imbalance. This issue has so far limited the adoption of these efficient K-Means techniques in parallel computational environments. In this work, we provide a parallel formulation for the KD-Tree based K-Means algorithm and address its load balancing issues.

Dynamic load balancing in parallel KD-tree k-means

One among the most influential and popular data mining methods is the k-Means algorithm for cluster analysis. Techniques for improving the efficiency of k-Means have been largely explored in two main directions. The amount of computation can be significantly reduced by adopting geometrical constraints and an efficient data structure, notably a multidimensional binary search tree (KD-Tree). These techniques allow to reduce the number of distance computations the algorithm performs at each iteration. A second direction is parallel processing, where data and computation loads are distributed over many processing nodes. However, little work has been done to provide a parallel formulation of the efficient sequential techniques based on KD-Trees. Such approaches are expected to have an irregular distribution of computation load and can suffer from load imbalance. This issue has so far limited the adoption of these efficient k-Means variants in parallel computing environments. In this work, we provide a parallel formulation of the KD-Tree based k-Means algorithm for distributed memory systems and address its load balancing issue. Three solutions have been developed and tested. Two approaches are based on a static partitioning of the data set and a third solution incorporates a dynamic load balancing policy.

Distributed mining of molecular fragments

In real world applications sequential algorithms of data mining and data exploration are often unsuitable for datasets with enormous size, high-dimensionality and complex data structure. Grid computing promises unprecedented opportunities for unlimited computing and storage resources. In this context there is the necessity to develop high performance distributed data mining algorithms. However, the computational complexity of the problem and the large amount of data to be explored often make the design of large scale applications particularly challenging. In this paper we present the first distributed formulation of a frequent subgraph mining algorithm for discriminative fragments of molecular compounds. Two distributed approaches have been developed and compared on the well known National Cancer Institute’s HIV-screening dataset. We present experimental results on a small-scale computing environment.

Turbo channel estimation and equalisation for a superposition-based cooperative system

This study investigates the superposition-based cooperative transmission system. In this system, a key point is for the relay node to detect data transmitted from the source node. This issued was less considered in the existing literature as the channel is usually assumed to be flat fading and a priori known. In practice, however, the channel is not only a priori unknown but subject to frequency selective fading. Channel estimation is thus necessary. Of particular interest is the channel estimation at the relay node which imposes extra requirement for the system resources. The authors propose a novel turbo least-square channel estimator by exploring the superposition structure of the transmission data. The proposed channel estimator not only requires no pilot symbols but also has significantly better performance than the classic approach. The soft-in-soft-out minimum mean square error (MMSE) equaliser is also re-derived to match the superimposed data structure. Finally computer simulation results are shown to verify the proposed algorithm.

Plug-and-play remote portlet publishing

Web Services for Remote Portlets (WSRP) is gaining attention among portal developers and vendors to enable easy development, increased richness in functionality, pluggability, and flexibility of deployment. Whilst currently not supporting all WSRP functionalities, open-source portal frameworks could in future use WSRP Consumers to access remote portlets found from a WSRP Producer registry service. This implies that we need a central registry for the remote portlets and a more expressive WSRP Consumer interface to implement the remote portlet functions. This paper reports on an investigation into a new system architecture, which includes a Web Services repository, registry, and client interface. The Web Services repository holds portlets as remote resource producers. A new data structure for expressing remote portlets is found and published by populating a Universal Description, Discovery and Integration (UDDI) registry. A remote portlet publish and search engine for UDDI has also been developed. Finally, a remote portlet client interface was developed as a Web application. The client interface supports remote portlet features, as well as window status and mode functions. Copyright (c) 2007 John Wiley & Sons, Ltd.

Space partitioning for scalable K-means

K-Means is a popular clustering algorithm which adopts an iterative refinement procedure to determine data partitions and to compute their associated centres of mass, called centroids. The straightforward implementation of the algorithm is often referred to as `brute force' since it computes a proximity measure from each data point to each centroid at every iteration of the K-Means process. Efficient implementations of the K-Means algorithm have been predominantly based on multi-dimensional binary search trees (KD-Trees). A combination of an efficient data structure and geometrical constraints allow to reduce the number of distance computations required at each iteration. In this work we present a general space partitioning approach for improving the efficiency and the scalability of the K-Means algorithm. We propose to adopt approximate hierarchical clustering methods to generate binary space partitioning trees in contrast to KD-Trees. In the experimental analysis, we have tested the performance of the proposed Binary Space Partitioning K-Means (BSP-KM) when a divisive clustering algorithm is used. We have carried out extensive experimental tests to compare the proposed approach to the one based on KD-Trees (KD-KM) in a wide range of the parameters space. BSP-KM is more scalable than KDKM, while keeping the deterministic nature of the `brute force' algorithm. In particular, the proposed space partitioning approach has shown to overcome the well-known limitation of KD-Trees in high-dimensional spaces and can also be adopted to improve the efficiency of other algorithms in which KD-Trees have been used.

FAMOUS, faster: using parallel computing techniques to accelerate the FAMOUS/HadCM3 climate model with a focus on the radiative transfer algorithm

We have optimised the atmospheric radiation algorithm of the FAMOUS climate model on several hardware platforms. The optimisation involved translating the Fortran code to C and restructuring the algorithm around the computation of a single air column. Instead of the existing MPI-based domain decomposition, we used a task queue and a thread pool to schedule the computation of individual columns on the available processors. Finally, four air columns are packed together in a single data structure and computed simultaneously using Single Instruction Multiple Data operations. The modified algorithm runs more than 50 times faster on the CELL’s Synergistic Processing Elements than on its main PowerPC processing element. On Intel-compatible processors, the new radiation code runs 4 times faster. On the tested graphics processor, using OpenCL, we find a speed-up of more than 2.5 times as compared to the original code on the main CPU. Because the radiation code takes more than 60% of the total CPU time, FAMOUS executes more than twice as fast. Our version of the algorithm returns bit-wise identical results, which demonstrates the robustness of our approach. We estimate that this project required around two and a half man-years of work.