Noise propagation from a cutting of arbitrary cross-section and impedance

A boundary integral equation is described for the prediction of acoustic propagation from a monofrequency coherent line source in a cutting with impedance boundary conditions onto surrounding flat impedance ground. The problem is stated as a boundary value problem for the Helmholtz equation and is subsequently reformulated as a system of boundary integral equations via Green's theorem. It is shown that the integral equation formulation has a unique solution at all wavenumbers. The numerical solution of the coupled boundary integral equations by a simple boundary element method is then described. The convergence of the numerical scheme is demonstrated experimentally. Predictions of A-weighted excess attenuation for a traffic noise spectrum are made illustrating the effects of varying the depth of the cutting and the absorbency of the surrounding ground surface.

Energy Efficiency through Thermal Energy Storage : Possibilities for the Swedish Building Stock

The need for heating and cooling in buildings constitutes a considerable part of the total energy use in a country and reducing this need is of outmost importance in order to reach national and international goals for reducing energy use and emissions. One important way of reaching these goals is to increase the proportion of renewable energy used for heating and cooling of buildings. Perhaps the largest obstacle with this is the often occurring mismatch between the availability of renewable energy and the need for heating or cooling, hindering this energy to be used directly. This is one of the problems that can be solved by using thermal energy storage (TES) in order to save the heat or cold from when it is available to when it is needed. This thesis is focusing on the combination of TES techniques and buildings to achieve increased energy efficiency for heating and cooling. Various techniques used for TES as well as the combination of TES in buildings have been investigated and summarized through an extensive literature review. A survey of the Swedish building stock was also performed in order to define building types common in Sweden. Within the scope of this thesis, the survey resulted in the selection of three building types, two single family houses and one office building, out of which the two residential buildings were used in a simulation case study of passive TES with increased thermal mass (both sensible and latent). The second case study presented in the thesis is an evaluation of an existing seasonal borehole storage of solar heat for a residential community. In this case, real measurement data was used in the evaluation and in comparisons with earlier evaluations. The literature reviews showed that using TES opens up potential for reduced energy demand and reduced peak heating and cooling loads as well as possibilities for an increased share of renewable energy to cover the energy demand. By using passive storage through increased thermal mass of a building it is also possible to reduce variations in the indoor temperature and especially reduce excess temperatures during warm periods, which could result in avoiding active cooling in a building that would otherwise need it. The analysis of the combination of TES and building types confirmed that TES has a significant potential for increased energy efficiency in buildings but also highlighted the fact that there is still much research required before some of the technologies can become commercially available. In the simulation case study it was concluded that only a small reduction in heating demand is possible with increased thermal mass, but that the time with indoor temperatures above 24 °C can be reduced by up to 20%. The case study of the borehole storage system showed that although the storage system worked as planned, heat losses in the rest of the system as well as some problems with the system operation resulted in a lower solar fraction than projected. The work presented within this thesis has shown that TES is already used successfully for many building applications (e.g. domestic hot water stores and water tanks for storing solar heat) but that there still is much potential in further use of TES. There are, however, barriers such as a need for more research for some storage technologies as well as storage materials, especially phase change material storage and thermochemical storage.

Toward convergence? The brazilian stock market concentration and the role of private equity in its diversification

Using quantitative data obtained from public available database, this paper discusses the difference between of the Brazilian GDP and the Brazilian Stock Exchange industry breakdown. I examined if, and to what extent, the industry breakdowns are similar. First, I found out that the Stock Exchange industry breakdown is overwhelming different from the GDP, which may present a potential problem to asset allocation and portfolio diversification in Brazil. Second, I identified an important evidence of a convergence between the GDP and the Stock Exchange in the last 9 years. Third, it became clear that the Privatizations in the late 90’s and IPO market from 2004 to 2008 change the dynamics of the Brazilian Stock Exchange. And fourth, I identified that Private Equity and Venture Capital industry may play an important role on the portfolio diversification in Brazil.

Low variation in ribosomal DNA and internal transcribed spacers of the symbiotic fungi of leaf-cutting ants (Attini: Formicidae)

Leaf-cutting ants of the genera Atta and Acromyrmex (tribe Attini) are symbiotic with basidiomycete fungi of the genus Leucoagaricus (tribe Leucocoprineae), which they cultivate on vegetable matter inside their nests. We determined the variation of the 28S, 18S, and 5.8S ribosomal DNA (rDNA) gene loci and the rapidly evolving internal transcribed spacers 1 and 2 (ITS1 and ITS2) of 15 sympatric and allopatric fungi associated with colonies of 11 species of leafcutter ants living up to 2,600 km apart in Brazil. We found that the fungal rDNA and ITS sequences from different species of ants were identical (or nearly identical) to each other, whereas 10 GenBank Leucoagaricus species showed higher ITS variation. Our findings suggest that Atta and Acromyrmex leafcutters living in geographic sites that are very distant from each other cultivate a single fungal species made up of closely related lineages of Leucoagaricus gongylophorus. We discuss the strikingly high similarity in the ITS1 and ITS2 regions of the Atta and Acromyrmex symbiotic L. gongylophorus studied by us, in contrast to the lower similarity displayed by their non-symbiotic counterparts. We suggest that the similarity of our L. gongylophorus isolates is an indication of the recent association of the fungus with these ants, and propose that both the intense lateral transmission of fungal material within leafcutter nests and the selection of more adapted fungal strains are involved in the homogenization of the symbiotic fungal stock.

Antagonistic interactions between garden yeasts and microfungal garden pathogens of leaf-cutting ants

We investigate the diversity of yeasts isolated in gardens of the leafcutter ant Atta texana. Repeated sampling of gardens from four nests over a 1-year time period showed that gardens contain a diverse assemblage of yeasts. The yeast community in gardens consisted mostly of yeasts associated with plants or soil, but community composition changed between sampling periods. In order to understand the potential disease-suppressing roles of the garden yeasts, we screened isolates for antagonistic effects against known microfungal garden contaminants. In vitro assays revealed that yeasts inhibited the mycelial growth of two strains of Escovopsis (a specialized attine garden parasite), Syncephalastrum racemosum (a fungus often growing in gardens of leafcutter lab nests), and the insect pathogen Beauveria bassiana. These garden yeasts add to the growing list of disease-suppressing microbes in attine nests that may contribute synergistically, together with actinomycetes and Burkholderia bacteria, to protect the gardens and the ants against diseases. Additionally, we suggest that garden immunity against problem fungi may therefore derive not only from the presence of disease-suppressing Pseudonocardia actinomycetes, but from an enrichment of multiple disease-suppressing microorganisms in the garden matrix.

Advanced ceramics: Evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics grounded by a plane tangential grinding process with diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The discussion about the results emphasized the wear mechanism of the grinding wheel cutting surface and the cutting phenomenology of the grinding process. The grounded surface was evaluated using Scanning Electron Microscopy (SEM). © 1999 Society of Automotive Engineers, Inc.

Advanced ceramics: Evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the hmax can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Sustainable development 20 years on from the earth summit: progress, gaps and strategic guidelines for Latin America and the Caribbean

Includes bibliography

Propagação do rambutanzeiro (Nephelium lapacceum L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Shareholder protection and stock market development

The dissertation contains five parts: An introduction, three major chapters, and a short conclusion. The First Chapter starts from a survey and discussion of the studies on corporate law and financial development literature. The commonly used methods in these cross-sectional analyses are biased as legal origins are no longer valid instruments. Hence, the model uncertainty becomes a salient problem. The Bayesian Model Averaging algorithm is applied to test the robustness of empirical results in Djankov et al. (2008). The analysis finds that their constructed legal index is not robustly correlated with most of the various stock market outcome variables. The second Chapter looks into the effects of minority shareholders protection in corporate governance regime on entrepreneurs' ex ante incentives to undertake IPO. Most of the current literature focuses on the beneficial part of minority shareholder protection on valuation, while overlooks its private costs on entrepreneur's control. As a result, the entrepreneur trade-offs the costs of monitoring with the benefits of cheap sources of finance when minority shareholder protection improves. The theoretical predictions are empirically tested using panel data and GMM-sys estimator. The third Chapter investigates the corporate law and corporate governance reform in China. The corporate law in China regards shareholder control as the means to the ends of pursuing the interests of stakeholders, which is inefficient. The Chapter combines the recent development of theories of the firm, i.e., the team production theory and the property rights theory, to solve such problem. The enlightened shareholder value, which emphasizes on the long term valuation of the firm, should be adopted as objectives of listed firms. In addition, a move from the mandatory division of power between shareholder meeting and board meeting to the default regime, is proposed.

Cut-first branch-and-price-second for the capacitated arc-routing problem

This paper presents the first full-fledged branch-and-price (bap) algorithm for the capacitated arc-routing problem (CARP). Prior exact solution techniques either rely on cutting planes or the transformation of the CARP into a node-routing problem. The drawbacks are either models with inherent symmetry, dense underlying networks, or a formulation where edge flows in a potential solution do not allow the reconstruction of unique CARP tours. The proposed algorithm circumvents all these drawbacks by taking the beneficial ingredients from existing CARP methods and combining them in a new way. The first step is the solution of the one-index formulation of the CARP in order to produce strong cuts and an excellent lower bound. It is known that this bound is typically stronger than relaxations of a pure set-partitioning CARP model.rnSuch a set-partitioning master program results from a Dantzig-Wolfe decomposition. In the second phase, the master program is initialized with the strong cuts, CARP tours are iteratively generated by a pricing procedure, and branching is required to produce integer solutions. This is a cut-first bap-second algorithm and its main function is, in fact, the splitting of edge flows into unique CARP tours.

Identificazione di possibili unita' di stock di Anguilla anguilla mediante analisi microchimica e morfometrica degli otoliti

L’anguilla europea, è una specie eurialina catadroma con un complesso ciclo biologico: l’area di riproduzione, unica, si trova molto distante da quella di distribuzione. La specie necessita di una gestione dello stock a fini conservazionistici. Il problema è europeo: lo stock è unico, distribuito in Europa e nell’Africa settentrionale, si riproduce in Atlantico ed è panmittico. C’è preoccupazione per il declino del reclutamento e delle catture di adulti. Lo scopo del progetto è di individuare possibili unità di stock nella penisola italiana. La ricerca è basata sullo studio degli otoliti mediante analisi morfometrica e microchimica. I contorni degli otoliti sono sottoposti ad analisi ellittica di Fourier per individuare eventuali gruppi. Gli otoliti sono stati levigati per effettuare: letture d’età, indagini microstrutturali al SEM delle fasi larvali, analisi microchimiche LA-ICP-MS del nucleo, studiarne l’origine e valutare l’ambiente di sviluppo. Le indagini morfometriche mostrano evidenti pattern ontogenetici, ma non legati ocorrelati alla località, sesso o anno di nascita. Le indagini microstrutturali hanno evidenziano l’alto contenuto organico nucleare, un pattern comune di crescita ed eventi chiave delle fasi larvali, con una media di 212 anelli giornalieri. La microchimica rivela che le larve si sviluppano in acque salate fino alla metamorfosi, poi migrano verso acque meno salate. Le analisi su campioni nati nello stesso anno, evidenziano due gruppi: individui di rimonta naturale e individui di ripopolamento. I profili nucleo bordo evidenziano la permanenza a salinità intermedie degli adulti. L’attività di ricerca si è dimostrata proficua dal punto di vista tecnico con la messa a punto di protocolli innovativi e con forti ricadute sulla riduzione dei tempi e costi d’analisi. Il debole segnale di possibili unità di stock andrà verificato in futuro mediante analisi più dettagliate discriminando meglio la storia di ogni singolo individuo.

Exact Solutions to the Symmetric and Asymmetric Vehicle Routing Problem with Simultaneous Delivery and Pick-Up

In reverse logistics networks, products (e.g., bottles or containers) have to be transported from a depot to customer locations and, after use, from customer locations back to the depot. In order to operate economically beneficial, companies prefer a simultaneous delivery and pick-up service. The resulting Vehicle Routing Problem with Simultaneous Delivery and Pick-up (VRPSDP) is an operational problem, which has to be solved daily by many companies. We present two mixed-integer linear model formulations for the VRPSDP, namely a vehicle-flow and a commodity-flow model. In order to strengthen the models, domain-reducing preprocessing techniques, and effective cutting planes are outlined. Symmetric benchmark instances known from the literature as well as new asymmetric instances derived from real-world problems are solved to optimality using CPLEX 12.1.

Technical Efficiency and Stock Market Reaction to Horizontal Mergers

This study examines the relationship between stock market reaction to horizontal merger announcements and technical efficiency levels of the participating firms. The analysis is based on data pertaining to eighty mergers between firms in the U.S. manufacturing industry during the 1990s. We employ Data Envelopment Analysis (DEA) to measure technical efficiency, which capture the firms. competence to produce the maximum output given certain productive resources. Abnormal returns related to the merger announcements provide the investor.s re-evaluation on the future performance of the participating firms. In order to avoid the problem of nonnormality, heteroskedasticity in the regression analysis, bootstrap method is employed for estimations and inferences. We found that there is a significant relationship between technical efficiency and market response. The market apparently welcomes the merger as an arrangement to improve resource utilizations.

Robust rolling stock in rapid transit network

This paper focuses on the railway rolling stock circulation problem in rapid transit networks, in which frequencies are high and distances are relatively short. Although the distances are not very large, service times are high due to the large number of intermediate stops required to allow proper passenger flow. The main complicating issue is the fact that the available capacity at depot stations is very low, and both capacity and rolling stock are shared between different train lines. This forces the introduction of empty train movements and rotation maneuvers, to ensure sufficient station capacity and rolling stock availability. However, these shunting operations may sometimes be difficult to perform and can easily malfunction, causing localized incidents that could propagate throughout the entire network due to cascading effects. This type of operation will be penalized with the goal of selectively avoiding them and ameliorating their high malfunction probabilities. Critic trains, defined as train services that come through stations that have a large number of passengers arriving at the platform during rush hours, are also introduced. We illustrate our model using computational experiments drawn from RENFE (the main Spanish operator of suburban passenger trains) in Madrid, Spain. The results of the model, achieved in approximately 1 min, have been received positively by RENFE planners