952 resultados para Copper (Cu) sensitive DNAzyme
Resumo:
This article addresses the establishment of integrated diagnostics and recommendation system (DRIS) standards for irrigated bean crops (Phaseolus vulgaris) and compares leaf concentrations and productivity in low- and high-productivity populations. The work was carried out in Santa Fe de Goias, Goias State, Brazil, in the agricultural years 1999/2000 and 2000/2001. For the nutritional diagnosis, leaf samples were collected, and leaf concentrations of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), boron (B), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn) were established in 100 commercial bean crops. A database was set up listing the leaf nutrient content and the respective productivities, subdivided into two subpopulations, high and low productivity, using a bean yield value of 3000 kg ha-1 to separate these subpopulations. Sufficiency values found in the high-productivity population matched only for the micronutrients B and Zn. The nutritional balance among the populations studied was coherent and was lower in the high-productivity population. The DRIS standards proposed for irrigated bean farming were efficient in evaluating the nutritional status of the crop areas studied. Calcium, Cu, and S were found to be the least available nutrients, indicating high response potential for the fertilizing using these nutrients.
Resumo:
The jambu is a broad vegetable consumption in Northern Brazil, especially in Pará, known by the jambu and other common names is native to the Amazon region has been used and cultivated for culinary and also recently in natural medicines by their chemical properties, attributed to the spilanthol compound. Knowing the amount of nutrient uptake in plants, especially at the taken, it is important to evaluate the removal of nutrients necessary for economic fertilizer recommendations. So the goal of this project was to determine the accumulation of nutrients in plants of jambu (leaf and inflorescence) under different fertilizations. The experiment was conducted at São Manuel Experimental Farm UNESP. The statistical was arranged in the randomized block design, in a 2 x 6 factorial scheme, two sources of fertilizers (organic and mineral) and six doses of nitrogen, with four replications. We evaluated the macronutrients of accumulation N, P, K, Ca, Mg, S and micronutrients of accumulation B, Cu, Fe and Zn in leaves and inflorescence. The plants responded more jambu nutrients of translocation phosphorus (P), magnesium (Mg), sulfhur (S), boron (B), copper (Cu) and iron (Fe) in the inflorescences and phosphorus (P), calcium (Ca), manganese (Mg), sulfur (S), boron (B), copper (Cu) and iron (Fe) in leaves to organic fertilization demonstrating the effectiveness of using this source of fertilizer nutrients indicating that this was a defining characteristic in response to the accumulation of nutrients in the leaves and inflorescences jambu. Plants jambu are more responsive to fertilizer for the mineral of translocation nitrogen (N) and manganese (Mn) for both the sheet and for the inflorescences of plants jambu.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The objective of this study was to evaluate the effect of different sources and doses of copper (Cu) applied to leaves on growth and nutrition of coffee seedlings. The treatments consisted of combinations of two Cu sources (Cupric Sulfate Ammonium - CSA and Copper Sulfate - CS) and four Cu doses (0, 250, 500 and 1000 g ha-1). The sources of Cu in different doses were dissolved in water, calculated for the application volume of 400 L ha-1. The doses were divided in 3 applications at 20 days. The Cu content and concentration in the leaf, stem, and root in were measured. The dry matter of the leaf, stem, root and total and the utilization, absorption and translocation efficiency, in coffee seedlings were evaluated. In general the Cu content and concentration were obtained for the CS at doses of 250, 500 and 1000 g ha-1 Cu. The maximum increase of total dry matter was 48 and 51 g to CSA and CS, when applied 534 and 668 g ha-1, respectively. The highest utilization and absorption efficiency was found to CSA and CS, respectively. The translocation efficiency was similar for both sources.
Resumo:
Nitrogen (N) is the most required nutrient for corn plants and, in order to supply this demand in highly productive crops, mineral fertilizers are used, especially urea. The disadvantage of urea is the loss of N-NH3 to atmosphere. To reverse this situation, some technologies have been developed, such as nitrification and urease inhibitors, which are used as additives to urea. This work aimed at evaluating the agronomic efficiency of urea stabilized with urease and nitrification inhibitors applied to cover the 2013/2014 corn crop. We evaluated 11 nitrogen fertilizer applied in coverage: urea + PA (41.6% N, 3% Cu); urea + PA (41.6% N, 1.5% Cu); urea + PA (41.6% N, 3% Zn); urea + PA (41.6% N, 1.5% Zn); urea + PA (41.6% N, 0.34% Cu, 0.94% B); urea + PA (41.6% N, 0.25% Cu, 0.68% B); urea + PA (41.6% N); urea (44.3% N, 0.15% Cu, 0.4% B); urea (43% N, 0.1% Cu, 0.3% B, 0.05% Mo); pearled urea (46% N); urea + 0,8% DMPP (45% N) and the control, which did not receive nitrogen topdressing. The evaluations were: Nitrogen losses through volatilization, content and accumulation of N, boron (B), copper (Cu) and zinc (Zn) to the dry matter of aerial parts, grains, and in straw and grain productivity. Fertilizers stabilized with urease and nitrification inhibitors did not reduce the volatilization of ammonia volatilization, when compared to pearled urea. Urea with 0.8% of DMPP nitrification inhibitor (3,4-dimethylpyrazole phosphate) provided higher loss by volatilization, lower productivity and agronomic efficiency compared to pearled urea. The coating of urea with Cu, B and Zn did not increase the accumulation of these nutrients in grains and MSPA plants. The use of fertilizers stabilized and coated with micronutrients did not increase the productivity and agronomic efficiency compared to conventional urea.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Ciências Biológicas (Biologia Vegetal) - IBRC
Resumo:
Pós-graduação em Microbiologia Agropecuária - FCAV
Resumo:
Pós-graduação em Zootecnia - FMVZ
Resumo:
Realizou-se um estudo das deficiências minerais em vacas em lactação de rebanhos leiteiros pertencentes a 13 propriedades da bacia leiteira do município de Rondon do Pará, estado do Pará. Foram determinados os níveis de fósforo (P) no osso, e os níveis de cobre (Cu), cobalto (Co), selênio (Se) e zinco (Zn) no fígado de 47 vacas leiteiras no 2º terço da lactação. Estas amostras foram coletadas por meio de biópsias realizadas no terço superior da 12a costela do lado direito e no bordo caudal do lobo caudado do fígado, respectivamente. Os rebanhos eram formados por animais mestiços (Holandes x Zebu), mantidos em sistema de produção extensivo em pastos de Brachiaria brizantha cv Marandu e recebiam suplementação mineral. A mistura mineral em 12 propriedades era do tipo comercial, dita "completa", acrescida de quantidades de NaCl acima do recomendado pelos fabricantes em dez propriedades. Em sete propriedades as misturas minerais eram fornecidas em cochos sem cobertura e em oito, o fornecimento da mistura mineral não era realizado diariamente. Em 11 propriedades, havia históricos clínicos condizentes com deficiências minerais nos rebanhos. Nessas fazendas a retenção de placenta e a osteofagia foram as alterações mais relatadas. Após as análises minerais observou-se deficiência de P em cinco propriedades, de Co em três propriedades, de Se em nove propriedades e de Zn em dez propriedades. Conclui-se que ocorre a deficiência de P, Co, Se e Zn; a suplementação mineral realizada na maioria das propriedades não atendeu as exigências diárias de P, Se e Co, baseadas no consumo estimado de 30 g de NaCl/animal/dia; os cochos pouco adequados ou inadequados para a suplementação, assim como o fornecimento inconstante das misturas minerais possivelmente contribuíram para a deficiência de um ou mais minerais.
Resumo:
O tratamento de esgotos sanitários e o seu posterior reúso, tornou-se uma alternativa viável para a irrigação, atividade que utiliza em torno de 70 % de toda a água consumida no planeta. Nesse sentido, o objetivo deste estudo foi monitorar durante todo o ciclo do trigo, os teores de Ferro e Manganês, bem como valores de pH e condutividade elétrica da água residuária utilizada para irrigação da cultura por gotejamento. A água residuária utilizada no estudo foi proveniente da Estação de Tratamento de Esgotos (ETE) da cidade de Botucatu-SP. No período de maio a outubro de 2011 a amostragem da água residuária foi realizada semanalmente, na saída da ETE. Foram determinados os seguintes parâmetros: Boro (B), Cobre (Cu), Ferro (Fe), Manganês (Mn) e Zinco (Zn), segundo metodologia adaptada de Malavolta et al. (1997). O pH e a condutividade elétrica (CE) foram determinados com auxilio de um pHmetro e condutivímetro, respectivamente. Não foi observado teores de Fe e Mn e valores de pH que comprometessem o sistema de irrigação, ou seja, que apresentasse alto potencial de risco de obstrução de tubulações e emissores (gotejamento). Os valores de CE indicam que a água residuária pode ser usada no solo, sempre que houver grau elevado de lixiviação, sem maior comprometimento das culturas.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The quality assurance control program (QACP) in clinical radiology is very important to acquire, image quality, patient dose reduction and cost for the institution. The verification of the real tension on the x ray tube, it is one of many parameters that may be determined on a QACP. This act on image quality as absorbed dose in patient. Once proved the importance of this fact, this study come up with the determination of tension to any X ray tube used on medical routine, on quick, safe and low cost manner. To reach the aim of this study, the methodology consisted on measuring expose rates (ER) using different thicknesses of copper (Cu) plates like filters and relating these results with Half Layer Value (HLV). Afterwards, the HLV was associated to real tension that was acquired with kilo voltage of peak (kVp) measurers used on clinical routine. So walking in this path, when performed the ER, on any X ray tube, it’s possible acquire the HLV and consequently the real kVp, considering measures obtained before, on the methodology of kVp estimative development