Regional digest of selected demographic and social indicators 1960-1990

Includes bibliography

Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization

This study compared the effect of physicochemical surface conditioning methods on the adhesion of bis-GMA-based resin cement to particulate filler composite (PFC) used for indirect dental restorations. PFC blocks (N (block)=54, n (block)=9 per group) were polymerized and randomly subjected to one of the following surface conditioning methods: a) No conditioning (Control-C), b) Hydrofluoric acid (HF)etching for 60s (AE60), c) HF for 90s (AE90), d) HF for 120s (AE120), e) HF for 180s (AE180), and f) air-abrasion with 30 mu m silica-coated alumina particles (AB). The conditioned surfaces were silanized with an MPS silane, and an adhesive resin was applied. Resin composite blocks were bonded to PFC using resin cement and photo-polymerized. PFC-cement-resin composite blocks were cut under coolant water to obtain bar specimens (1mmx0.8mm). Microtensile bond strength test (mu TBS)was performed in a universal testing machine (1mm/min). After debonding, failure modes were classified using stereomicroscopy. Surface characterization was performed on a set of separate specimen surfaces using Scanning Electron Microscopy (SEM), X-Ray Dispersive Spectroscopy (XDS), X-Ray Photoelectron Spectroscopy (XPS), and Fourier Transform-Raman Spectroscopy (FT-RS). Mean mu TBS (MPa) of C (35.6 +/- 4.9) was significantly lower than those of other groups (40.2 +/- 5.6-47.4 +/- 6.1) (p<0.05). The highest mu TBS was obtained in Group AB (47.4 +/- 6.1). Prolonged duration of HF etching increased the results (AE180: 41.9 +/- 7), but was not significantly different than that of AB (p>0.05). Failure types were predominantly cohesive in PFC (34 out of 54) followed by cohesive failure in the cement (16 out of 54). Degree of conversion (DC) of the PFC was 63 +/- 10%. SEM analysis showed increased irregularities on PFC surfaces with the increased etching time. Chemical surface analyses with XPS and FT-RS indicated 11-70% silane on the PFC surfaces that contributed to improved bond strength compared to Group C that presented 5% silane, which seemed to be a threshold. Group AB displayed 83% SiO2 and 17% silane on the surfaces.

Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

Objective: The purpose of this study was to assess the influence of conditioning methods and thermocycling on the bond strength between composite core and resin cement. Material and Methods: Eighty blocks (8x8x4 mm) were prepared with core build-up composite. The cementation surface was roughened with 120-grit carbide paper and the blocks were thermocycled (5,000 cycles, between 5 degrees C and 55 degrees C, with a 30 s dwell time in each bath). A layer of temporary luting agent was applied. After 24 h, the layer was removed, and the blocks were divided into five groups, according to surface treatment: (NT) No treatment (control); (SP) Grinding with 120-grit carbide paper; (AC) Etching with 37% phosphoric acid; (SC) Sandblasting with 30 mm SiO2 particles, silane application; (AO) Sandblasting with 50 mu m Al2O3 particles, silane application. Two composite blocks were cemented to each other (n=8) and sectioned into sticks. Half of the specimens from each block were immediately tested for microtensile bond strength (mu TBS), while the other half was subjected to storage for 6 months, thermocycling (12,000 cycles, between 5 degrees C and 55 degrees C, with a dwell time of 30 s in each bath) and mu TBS test in a mechanical testing machine. Bond strength data were analyzed by repeated measures two-way ANOVA and Tukey test (alpha=0.05). Results: The mu TBS was significantly affected by surface treatment (p=0.007) and thermocycling (p=0.000). Before aging, the SP group presented higher bond strength when compared to NT and AC groups, whereas all the other groups were statistically similar. After aging, all the groups were statistically similar. SP submitted to thermocycling showed lower bond strength than SP without thermocycling. Conclusion: Core composites should be roughened with a diamond bur before the luting process. Thermocycling tends to reduce the bond strength between composite and resin cement.

Association between risk behaviors and adiposity indicators in adolescents from Southern Brazil: A methodological approach

The aim of this study was to analyze the association between risk behaviors and adiposity indicators in adolescents and to discuss some methodological aspects related to this relationship. We evaluated 1,321 adolescents (55.2% female) aged 10-16 years. Relative body fat (%fat) by measurement of triceps and subscapular skinfold thickness and waist circumference (WC) were used as total and central adiposity indicators, respectively. Physical inactivity, time spent in front of the TV, the consumption of soda and/or chocolate, alcohol, and tobacco smoking were analyzed as risk behaviors. Information about the socioeconomic status (categorized into three levels) and nutritional status of the mother (overweight or normal weight) were used as adjustment factors in the analyses of prevalence ratio (PR) of the outcomes and their associated 95% confidence intervals (95% CI). The chi-square test and Poisson regression were used for statistical analyses. Low associations were found between risk behaviors and adiposity indicators. Tobacco smoking was the most positively correlated behavior with adiposity in girls (%fat: PR = 1.61; 95% CI = 1.04-2.47; WC: PR = 1.90; 95% CI = 1.17-3.08) and in adolescents whose mothers were normal weight (%fat: PR = 2.31; 95% CI = 1.33-4.03; WC: PR: 2.31; CI: 1.19-4.46). Additionally, as an important methodological issue, we highlighted the assessment of risk behaviors in adolescents as crucial to producing more robust evidence on the subject. Of the investigated behaviors, we concluded that tobacco smoking is the behavior most associated with adiposity indicators.

Caries formation around restorative composite and glass ionomer cement

This in vitro study evaluated the demineralization around restorations class V made on the buccal and lingual surfaces of teeth when using different restorative materials. Thirty extracted teeth were randomly divided into 3 groups (n=10) according to the restorative material: Group I - Fuji II LC (GC America Inc., Alsip, Illinois, USA), Group II - Tetric (Ivoclar Vivadent AG, Schaan, Liechtenstein) and Group III - Chelon Fil (3M/ESPE., Seefeld, Germany). The teeth were submitted to a pH-cycling model associated to a thermocycling model. Sections were made and the specimens were analyzed under a polarized light microscopy as for the presence of demineralization. Measurements were performed and the results were subjected to statistical analysis using Anova and Tukey´s Test (α=0.05). Mean values of demineralization depth (µm) according to each positions showed that the demineralization was significantly reduced when Chelon Fil (Group III) was used for all depths, when compared to fluoridated resin materials. Also, it was verified that non-fluoridated resin material, composite resin Tetric, had the lowest inhibitory effect on the development of demineralization.

Diatoms and Tonsteins as Paleoenvironrnental and Paleodepositional Indicators in a Miocene Coal Bed, Costa Rica

Fresh-water diatoms are present in coal, and tonsteins (altered volcanic ash) are interbedded with the coal, in the Miocene Venado Formation on the southwest margin of the Limon Basin, in Provincia Alajuela, northern Costa Rica. The Venado Formation is composed of more than 300 m of mudstone, siltstone, sandstone, limestone, volcaniclastics, and coal beds. The coal beds are of unknown lateral extent and mainly occur in the middle part of the formation. The Pataste coal bed occurs near the middle of the formation and is divided into three parts by two tonstein layers. The abundance of biogenic opaline material (diatoms) in the coal is believed to be a direct response to an influx of silica from volcanic tuffs that Later altered to the tonsteins. Diatoms are a useful microscopic tool for identifying the depositional environments of the Pataste coal deposit. The diatoms identified include Aulacosira ambigua, Pinnularia sp., Eunotia spp., and Achnanthes exigua, among others. The abundance of Aulacosira arnbigua suggests that an open-water lacustrine environment was present locally. Achnanthes exigua and the remaining diatom species are benthic forms that lived in shallow fresh-water to slightly acidic swamp environments. The different types of diatoms found in the coal indicate that swamp environments were intermixed with lacustrine environments during the formation of the peat deposit or that the coal records environmental changes through time.

Nursing care time and quality indicators for adult intensive care: correlation analysis

The objective of this quantitative, correlational and descriptive study was to analyze the time the nursing staff spends to assist patients in Adult Intensive Care Units, as well as to verify its correlation with quality care indicators. The average length of time spent on care and the quality care indicators were identified by consulting management instruments the nursing head of the Unit employs. The average hours of nursing care delivered to patients remained stable, but lower than official Brazilian agencies' indications. The correlation between time of nursing care and the incidence of accidental extubation indicator indicated that it decreases with increasing nursing care delivered by nurses. The results of this investigation showed the influence of nursing care time, provided by nurses, in the outcome of care delivery.

Sugar intake is correlated with adiposity and obesity indicators and sedentary lifestyle in Brazilian individuals with morbid obesity

Obesity is a chronic disease characterized by increased accumulation of body fat. We evaluated the socioeconomic aspects, body composition, risk of metabolic complications associated with obesity, eating habits and lifestyle in both women and men adults and elderly with body mass index (BMI) 40 kg/m(2). Among the subjects studied, 79% (n = 32) are female, 5% (n = 2) smokers, 39% (n = 16) use alcohol and only 24% (n = 10) are practitioners of physical exercise. The higher food intake was breads, followed by rice. The daily intake of fruits and vegetables is low. Positive correlation between consumption of sugar and BMI and abdominal circumference (AC) was observed. In summary, was found that morbidly obese patients that looking for nutritional counseling presents increased body fat, poor eating habits and sedentary lifestyle.

Chemical, biochemical and microbiological indicators to assess soil quality in temperate agro-ecosystems

Soil is a critically important component of the earth’s biosphere. Developing agricultural production systems able to conserve soil quality is essential to guarantee the current and future capacity of soil to provide goods and services. This study investigates the potential of microbial and biochemical parameters to be used as early and sensitive soil quality indicators. Their ability to differentiate plots under contrasting fertilization regimes is evaluated based also on their sensitivity to seasonal fluctuations of environmental conditions and on their relationship with soil chemical parameters. Further, the study addresses some of the critical methodological aspects of microplate-based fluorimetric enzyme assays, in order to optimize assay conditions and evaluate their suitability to be used as a toll to asses soil quality. The study was based on a long-term field experiment established in 1966 in the Po valley (Italy). The soil was cropped with maize (Z. mays L.) and winter wheat (T. aestivum L.) and received no organic fertilization, crop residue or manure, in combination with increasing levels of mineral N fertilizer. The soil microbiota responded to manure amendment increasing it biomass and activity and changing its community composition. Crop residue effect was much more limited. Mineral N fertilization stimulated crop residue mineralization, shifted microbial community composition and influenced N and P cycling enzyme activities. Seasonal fluctuations of environmental factors affected the soil microbiota. However microbial and biochemical parameters seasonality did not hamper the identification of fertilization-induced effects. Soil microbial community abundance, function and composition appeared to be strongly related to soil organic matter content and composition, confirming the close link existing between these soil quality indicators. Microplate-based fluorimetric enzyme assays showed potential to be used as fast and throughput toll to asses soil quality, but required proper optimization of the assay conditions for a precise estimation of enzymes maximum potential activity.

The effect of a tin-containing fluoride mouth rinse on the bond between resin composite and erosively demineralised dentin

OBJECTIVES To evaluate the effect of a tin-containing fluoride (Sn/F) mouth rinse on microtensile bond strength (μTBS) between resin composite and erosively demineralised dentin. MATERIALS AND METHODS Dentin of 120 human molars was erosively demineralised using a 10-day cyclic de- and remineralisation model. For 40 molars, the model comprised erosive demineralisation only; for another 40, the model included treatment with a NaF solution; and for yet another 40, the model included treatment with a Sn/F mouth rinse. In half of these molars (n = 20), the demineralised organic matrix was continuously removed by collagenase. Silicon carbide paper-ground, non-erosively demineralised molars served as control (n = 20). Subsequently, μTBS of Clearfil SE/Filtek Z250 to the dentin was measured, and failure mode was determined. Additionally, surfaces were evaluated using SEM and EDX. RESULTS Compared to the non-erosively demineralised control, erosive demineralisation resulted in significantly lower μTBS regardless of the removal of demineralised organic matrix. Treatment with NaF increased μTBS, but the level of μTBS obtained by the non-erosively demineralised control was only reached when the demineralised organic matrix had been removed. The Sn/F mouth rinse together with removal of demineralised organic matrix led to significantly higher µTBS than did the non-erosively demineralised control. The Sn/F mouth rinse yielded higher μTBS than did the NaF solution. CONCLUSIONS Treatment of erosively demineralised dentin with a NaF solution or a Sn/F mouth rinse increased the bond strength of resin composite. CLINICAL RELEVANCE Bond strength of resin composite to eroded dentin was not negatively influenced by treatment with a tin-containing fluoride mouth rinse.

Comparison of clinical knowledge management capabilities of commercially-available and leading internally-developed electronic health records.

BACKGROUND: We have carried out an extensive qualitative research program focused on the barriers and facilitators to successful adoption and use of various features of advanced, state-of-the-art electronic health records (EHRs) within large, academic, teaching facilities with long-standing EHR research and development programs. We have recently begun investigating smaller, community hospitals and out-patient clinics that rely on commercially-available EHRs. We sought to assess whether the current generation of commercially-available EHRs are capable of providing the clinical knowledge management features, functions, tools, and techniques required to deliver and maintain the clinical decision support (CDS) interventions required to support the recently defined "meaningful use" criteria. METHODS: We developed and fielded a 17-question survey to representatives from nine commercially available EHR vendors and four leading internally developed EHRs. The first part of the survey asked basic questions about the vendor's EHR. The second part asked specifically about the CDS-related system tools and capabilities that each vendor provides. The final section asked about clinical content. RESULTS: All of the vendors and institutions have multiple modules capable of providing clinical decision support interventions to clinicians. The majority of the systems were capable of performing almost all of the key knowledge management functions we identified. CONCLUSION: If these well-designed commercially-available systems are coupled with the other key socio-technical concepts required for safe and effective EHR implementation and use, and organizations have access to implementable clinical knowledge, we expect that the transformation of the healthcare enterprise that so many have predicted, is achievable using commercially-available, state-of-the-art EHRs.

Forecasting and Analyzing Economic Activity with Coincident and Leading Indexes: The Case of Connecticut

We develop coincident and leading employment indexes for the Connecticut economy. Four employment-related variables enter the coincident index while five employment-related variables enter the leading index. The peaks and troughs in the leading index lead the peaks and troughs in the coincident index by an average of 3 and 9 months. Finally, we use the leading index in vector-autoregressive (VAR) and Bayesian vector-autoregressive (BVAR) models to forecast the coincident index, nonfarm employment, and the unemployment rate.

Ranking web services using centralities and social indicators

Nowadays, developers of web application mashups face a sheer overwhelming variety and pluralism of web services. Therefore, choosing appropriate web services to achieve specific goals requires a certain amount of knowledge as well as expertise. In order to support users in choosing appropriate web services it is not only important to match their search criteria to a dataset of possible choices but also to rank the results according to their relevance, thus minimizing the time it takes for taking such a choice. Therefore, we investigated six ranking approaches in an empirical manner and compared them to each other. Moreover, we have had a look on how one can combine those ranking algorithms linearly in order to maximize the quality of their outputs.