Pregnancy outcome following maternal exposure to Mirtazapine: Preliminary results of a collaborative ENTIS study.

Introduction: Mirtazapine is a noradrenergic and serotonergic antidepressant mainly acting through blockade of presynaptic alpha-2 receptors. Published data on pregnancy outcome after exposure to mirtazapine are scarce. This study addresses the risk associated with exposure to mirtazapine during pregnancy. Patients (or Materials) and Methods: Multicenter (n = 11), observational prospective cohort study comparing pregnancy outcomes after exposure to mirtazapine with 2 matched control groups: exposure to any selective serotonin reuptake inhibitor (SSRI) as a diseasematched control group, and general controls with no exposure to medication known to be teratogenic or to any antidepressant. Data were collected by members of the European Network of Teratology Information Services (ENTIS) during individual risk counseling between 1995 and 2011. Standardized procedures for data collection were used in each center. Results: A total of 357 pregnant women exposed to mirtazapine at any time during pregnancy were included in the study and compared with 357 pregnancies from each control group. The rate of major birth defects between the mirtazapine and the SSRI group did not differ significantly (4.5% vs 4.2%; unadjusted odds ratio, 1.1; 95% confidence interval, 0.5-2.3, P = 0.9). A trend toward a higher rate of birth defects in the mirtazapine group compared with general controls did not reach statistical significance (4.2% vs 1.9%; OR, 2.4; 95% CI, 0.9-6.3; P = 0.08). The crude rate of spontaneous abortions did not differ significantly between the mirtazapine, the SSRI, and the general control groups (9.5% vs 10.4% vs 8.4%; P = 0.67), neither did the rate of deliveries resulting in live births (79.6% vs 84.3% in both control groups; P = 0.15). However, a higher rate of elective pregnancy-termination was observed in the mirtazapine group compared with SSRI and general controls (7.8% vs 3.4% vs 5.6%; P = 0.03). Premature birth (< 37 weeks) (10.6% vs 10.1% vs 7.5%; P = 0.38), gestational age at birth (median, 39 weeks; interquartile range (IQR), 38-40 in all groups; P = 0.29), and birth weight (median, 3320 g; IQR, 2979-3636 vs 3230 g; IQR, 2910-3629 vs 3338 g; IQR, 2967-3650; P = 0.34) did not differ significantly between the groups. Conclusion: This study did not observe a statistically significant difference in the rate of major birth defects between mirtazapine, SSRI-exposed, and nonexposed pregnancies. A slightly higher rate of birth defects was, however, observed in the mirtazapine and SSRI groups compared with the low rate of birth defects in our general controls. Overall, the pregnancy outcome after mirtazapine exposure in this study is very similar to that of the SSRI-exposed control group.

European collaborative study of early-onset bipolar disorder: Evidence for genetic heterogeneity on 2q14 according to age at onset.

Bipolar disorder has a genetic component, but the mode of inheritance remains unclear. A previous genome scan conducted in 70 European families led to detect eight regions linked to bipolar disease. Here, we present an investigation of whether the phenotypic heterogeneity of the disorder corresponds to genetic heterogeneity in these regions using additional markers and an extended sample of families. The MLS statistic was used for linkage analyses. The predivided sample test and the maximum likelihood binomial methods were used to test genetic homogeneity between early-onset bipolar type I (cut-off of 22 years) and other types of the disorder (later onset of bipolar type I and early-onset bipolar type II), using a total of 138 independent bipolar-affected sib-pairs. Analysis of the extended sample of families supports linkage in four regions (2q14, 3p14, 16p23, and 20p12) of the eight regions of linkage suggested by our previous genome scan. Heterogeneity testing revealed genetic heterogeneity between early and late-onset bipolar type I in the 2q14 region (P = 0.0001). Only the early form of the bipolar disorder but not the late form appeared to be linked to this region. This region may therefore include a genetic factor either specifically involved in the early-onset bipolar type I or only influencing the age at onset (AAO). Our findings illustrate that stratification according to AAO may be valuable for the identification of genetic vulnerability polymorphisms.

Open video tools to support the production of online collaborative audiovisual projects : how to promote collective creation in e-learning

This paper analyses the use of open video editing tools to support the creation and production of online collaborative audiovisual projects for higher education. It focuses on the possibilities offered by these tools to promote collective creation in virtual environments.

Testing the validity of a set of diagnostic criteria for sensory neuronopathies: a francophone collaborative study.

There are no validated criteria for the diagnosis of sensory neuronopathy (SNN) yet. In a preliminary monocenter study a set of criteria relying on clinical and electrophysiological data showed good sensitivity and specificity for a diagnosis of probable SNN. The aim of this study was to test these criteria on a French multicenter study. 210 patients with sensory neuropathies from 15 francophone reference centers for neuromuscular diseases were included in the study with an expert diagnosis of non-SNN, SNN or suspected SNN according to the investigations performed in these centers. Diagnosis was obtained independently from the set of criteria to be tested. The expert diagnosis was taken as the reference against which the proposed SNN criteria were tested. The set relied on clinical and electrophysiological data easily obtainable with routine investigations. 9/61 (16.4 %) of non-SNN patients, 23/36 (63.9 %) of suspected SNN, and 102/113 (90.3 %) of SNN patients according to the expert diagnosis were classified as SNN by the criteria. The SNN criteria tested against the expert diagnosis in the SNN and non-SNN groups had 90.3 % (102/113) sensitivity, 85.2 % (52/61) specificity, 91.9 % (102/111) positive predictive value, and 82.5 % (52/63) negative predictive value. Discordance between the expert diagnosis and the SNN criteria occurred in 20 cases. After analysis of these cases, 11 could be reallocated to a correct diagnosis in accordance with the SNN criteria. The proposed criteria may be useful for the diagnosis of probable SNN in patients with sensory neuropathy. They can be reached with simple clinical and paraclinical investigations.

Drugs Associated with Hepatotoxicity and their Reporting Frequency of Liver Adverse Events in VigiBase (TM) Unified List Based on International Collaborative Work

BACKGROUND Challenges exist in the clinical diagnosis of drug-induced liver injury (DILI) and in obtaining information on hepatotoxicity in humans. OBJECTIVE (i) To develop a unified list that combines drugs incriminated in well vetted or adjudicated DILI cases from many recognized sources and drugs that have been subjected to serious regulatory actions due to hepatotoxicity; and (ii) to supplement the drug list with data on reporting frequencies of liver events in the WHO individual case safety report database (VigiBase). DATA SOURCES AND EXTRACTION (i) Drugs identified as causes of DILI at three major DILI registries; (ii) drugs identified as causes of drug-induced acute liver failure (ALF) in six different data sources, including major ALF registries and previously published ALF studies; and (iii) drugs identified as being subjected to serious governmental regulatory actions due to their hepatotoxicity in Europe or the US were collected. The reporting frequency of adverse events was determined using VigiBase, computed as Empirical Bayes Geometric Mean (EBGM) with 90% confidence interval for two customized terms, 'overall liver injury' and 'ALF'. EBGM of >or=2 was considered a disproportional increase in reporting frequency. The identified drugs were then characterized in terms of regional divergence, published case reports, serious regulatory actions, and reporting frequency of 'overall liver injury' and 'ALF' calculated from VigiBase. DATA SYNTHESIS After excluding herbs, supplements and alternative medicines, a total of 385 individual drugs were identified; 319 drugs were identified in the three DILI registries, 107 from the six ALF registries (or studies) and 47 drugs that were subjected to suspension or withdrawal in the US or Europe due to their hepatotoxicity. The identified drugs varied significantly between Spain, the US and Sweden. Of the 319 drugs identified in the DILI registries of adjudicated cases, 93.4% were found in published case reports, 1.9% were suspended or withdrawn due to hepatotoxicity and 25.7% were also identified in the ALF registries/studies. In VigiBase, 30.4% of the 319 drugs were associated with disproportionally higher reporting frequency of 'overall liver injury' and 83.1% were associated with at least one reported case of ALF. CONCLUSIONS This newly developed list of drugs associated with hepatotoxicity and the multifaceted analysis on hepatotoxicity will aid in causality assessment and clinical diagnosis of DILI and will provide a basis for further characterization of hepatotoxicity.

Electronic voting system for computer supported collaborative learning

The EVS4CSCL project starts in the context of a Computer Supported Collaborative Learning environment (CSCL). Previous UOC projects created a CSCL generic platform (CLPL) to facilitate the development of CSCL applications. A discussion forum (DF) was the first application developed over the framework. This discussion forum was different from other products on the marketplace because of its focus on the learning process. The DF carried out the specification and elaboration phases from the discussion learning process but there was a lack in the consensus phase. The consensus phase in a learning environment is not something to be achieved but tested. Common tests are done by Electronic Voting System (EVS) tools, but consensus test is not an assessment test. We are not evaluating our students by their answers but by their discussion activity. Our educational EVS would be used as a discussion catalyst proposing a discussion about the results after an initial query or it would be used after a discussion period in order to manifest how the discussion changed the students mind (consensus). It should be also used by the teacher as a quick way to know where the student needs some reinforcement. That is important in a distance-learning environment where there is no direct contact between the teacher and the student and it is difficult to detect the learning lacks. In an educational environment, assessment it is a must and the EVS will provide direct assessment by peer usefulness evaluation, teacher marks on every query created and indirect assessment from statistics regarding the user activity.

eKnowledge Project: Developing and piloting a forum tool to support the collaborative construction of knowledge on the UOC's Virtual Campus

Final report of the eKnowledge's project, an online forum tool that offers consultants and students the chance to create spaces for asynchronous communication and collaboration.

Reliable and persistent storage for CoDeS a distributed collaborative system

This research is aimed to find a solution for a distributed storage system adapted for CoDeS. By studying how DSSs work and how they are implemented, we can conclude how we can implement a DSS compatible with CoDeS requirements.

Collage, a Collaborative Learning Design Editor Based on Patterns

This paper introduces Collage, a high-level IMS-LD compliant authoring tool that is specialized for CSCL (Computer-Supported Collaborative Learning). Nowadays CSCL is a key trend in elearning since it highlights the importance of social interactions as an essential element of learning. CSCL is an interdisciplinary domain, which demands participatory design techniques that allow teachers to get directly involved in design activities. Developing CSCL designs using LD is a difficult task for teachers since LD is a complex technical specification and modelling collaborative characteristics can be tricky. Collage helps teachers in the process of creating their own potentially effective collaborative Learning Designs by reusing and customizing patterns, according to the requirements of a particular learning situation. These patterns, called Collaborative Learning Flow Patterns (CLFPs), represent best practices that are repetitively used by practitioners when structuring the flow of (collaborative) learning activities. An example of an LD that can be created using Collage is illustrated in the paper. Preliminary evaluation results show that teachers, with experience in CL but without LD knowledge, can successfully design real collaborative learning experiences using Collage.

Computational Representation of Collaborative Learning Flow Patterns Using IMS Learning Design

The identification and integration of reusable and customizable CSCL (Computer Supported Collaborative Learning) may benefit from the capture of best practices in collaborative learning structuring. The authors have proposed CLFPs (Collaborative Learning Flow Patterns) as a way of collecting these best practices. To facilitate the process of CLFPs by software systems, the paper proposes to specify these patterns using IMS Learning Design (IMS-LD). Thus, teachers without technical knowledge can particularize and integrate CSCL tools. Nevertheless, the support of IMS-LD for describing collaborative learning activities has some deficiencies: the collaborative tools that can be defined in these activities are limited. Thus, this paper proposes and discusses an extension to IMS-LD that enables to specify several characteristics of the use of tools that mediate collaboration. In order to obtain a Unit of Learning based on a CLFP, a three stage process is also proposed. A CLFP-based Unit of Learning example is used to illustrate the process and the need of the proposed extension.

Towards reusability and tailorability in collaborative learning systems using IMS-LD and grid services

CSCL applications are complex distributed systems that posespecial requirements towards achieving success in educationalsettings. Flexible and efficient design of collaborative activitiesby educators is a key precondition in order to provide CSCL tailorable systems, capable of adapting to the needs of eachparticular learning environment. Furthermore, some parts ofthose CSCL systems should be reused as often as possible inorder to reduce development costs. In addition, it may be necessary to employ special hardware devices, computational resources that reside in other organizations, or even exceed thepossibilities of one specific organization. Therefore, theproposal of this paper is twofold: collecting collaborativelearning designs (scripting) provided by educators, based onwell-known best practices (collaborative learning flow patterns) in a standard way (IMS-LD) in order to guide the tailoring of CSCL systems by selecting and integrating reusable CSCL software units; and, implementing those units in the form of grid services offered by third party providers. More specifically, this paper outlines a grid-based CSCL system having these features and illustrates its potential scope and applicability by means of a sample collaborative learning scenario.

A multicase study for the evaluation of a pattern-based visual design process for collaborative learning

Collage is a pattern-based visual design authoring tool for the creation of collaborative learning scripts computationally modelled with IMS Learning Design (LD). The pattern-based visual approach aims to provide teachers with design ideas that are based on broadly accepted practices. Besides, it seeks hiding the LD notation so that teachers can easily create their own designs. The use of visual representations supports both the understanding of the design ideas and the usability of the authoring tool. This paper presents a multicase study comprising three different cases that evaluate the approach from different perspectives. The first case includes workshops where teachers use Collage. A second case implies the design of a scenario proposed by a third-party using related approaches. The third case analyzes a situation where students follow a design created with Collage. The cross-case analysis provides a global understanding of the possibilities and limitations of the pattern-based visual design approach.

Free-and open source software for a course on network management: authoring and enactment of scripts based on collaborative learning strategies

This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.

Reusing IMS-LD formalized best practices in collaborative learning structuring

Designs of CSCL (Computer Supported Collaborative Learning)activities should be flexible, effective and customizable toparticular learning situations. On the other hand, structureddesigns aim to create favourable conditions for learning. Thus,this paper proposes the collection of representative and broadlyaccepted (best practices) structuring techniques in collaborative learning. With the aim of establishing a conceptual common ground among collaborative learning practitioners and softwaredevelopers, and reusing the expertise that best practicesrepresent, the paper also proposes the formulation of these techniques as patterns: the so-called CLFPs (CollaborativeLearning Flow Patterns). To formalize these patterns, we havechosen the educational modelling language IMS Learning Design (IMS-LD). IMS-LD has the capability to specify many of the collaborative characteristics of the CLFPs. Nevertheless, the language bears limited capability for describing the services that mediate interactions within a learning activity and the specification of temporal or rotated roles. This analysis isdiscussed in the paper, as well as our approaches towards thedevelopment of a system capable of integrating tools using IMSLDscripts and a CLFP-based Learning Design authoring tool.