KNOWLEDGE ON ADJUVANT PROPERTIES, DISPOSAL OF PESTICIDERESIDUES AND SPRAY DRIFT OCCURRENCE IN THE STATE OF MATO GROSSO

ABSTRACT This paper aimed at investigating the knowledge level of people working on pesticide spraying activities concerning spray adjuvant properties, as well as collecting information on disposal locations for residues from internal spray tank cleaning, and finally the understanding of pesticide spray drift occurrence in the state of Mato Grosso, Brazil. The information was gathered through a questionnaire answered by participants of a rural extension program in application technology located in nineteen grain and fiber producing regions of Mato Grosso state. Among the mentioned adjuvants, 49.0% belonged to the mineral oil class and 17.9% of participants did not know the functions performed by such products. In addition, 58.5% of the participants discarded residues into the field. Among the participants who answered the question about spray drift occurrence causes, 54.1% indicated problems relating to inadequate weather conditions. In conclusion, there is a lack of knowledge on adjuvant functions, besides of inappropriate residue disposal in the state of Mato Grosso. Spray drift was referred as a problem; however, most of participants were not able to discuss the causes of these losses.

Acidic dissolution of iron oxides and regeneration of a ceramic filter medium

The dewatering of iron ore concentrates requires large capacity in addition to producing a cake with low moisture content. Such large processes are commonly energy intensive and means to lower the specific energy consumption are needed. Ceramic capillary action disc filters incorporate a novel filter medium enabling the harnessing of capillary action, which results in decreased energy consumption in comparison to traditional filtration technologies. As another benefit, the filter medium is mechanically and chemically more durable than, for example, filter cloths and can, thus, withstand harsh operating conditions and possible regeneration better than other types of filter media. In iron ore dewatering, the regeneration of the filter medium is done through a combination of several techniques: (1) backwashing, (2) ultrasonic cleaning, and (3) acid regeneration. Although it is commonly acknowledged that the filter medium is affected by slurry particles and extraneous compounds, published research, especially in the field of dewatering of mineral concentrates, is scarce. Whereas the regenerative effect of backwashing and ultrasound are more or less mechanical, regeneration with acids is based on chemistry. The chemistry behind the acid regeneration is, naturally, dissolution. The dissolution of iron oxide particles has been extensively studied over several decades but those studies may not necessarily be directly applicable in the regeneration of the filter medium which has undergone interactions with the slurry components. The aim of this thesis was to investigate if free particle dissolution indeed correlates with the regeneration of the filter medium. For this purpose, both free particle dissolution and dissolution of surface adhered particles were studied. The focus was on acidic dissolution of iron oxide particles and on the study of the ceramic filter medium used in the dewatering of iron ore concentrates. The free particle dissolution experiments show that the solubility of synthetic fine grained iron oxide particles in oxalic acid could be explained through linear models accounting for the effects of temperature and acid concentration, whereas the dissolution of a natural magnetite is not so easily explained by such models. In addition, the kinetic experiments performed both support and contradict the work of previous authors: the suitable kinetic model here supports previous research suggesting solid state reduction to be the reaction mechanism of hematite dissolution but the formation of a stable iron oxalate is not supported by the results of this research. Several other dissolution mechanisms have also been suggested for iron oxide dissolution in oxalic acid, indicating that the details of oxalate promoted reductive dissolution are not yet agreed and, in this respect, this research offers added value to the community. The results of the regeneration experiments with the ceramic filter media show that oxalic acid is highly effective in removing iron oxide particles from the surface of the filter medium. The dissolution of those particles did not, however, exhibit the expected behaviour, i.e. complete dissolution. The results of this thesis show that although the regeneration of the ceramic filter medium with acids incorporates the dissolution of slurry particles from the surface of the filter medium, the regeneration cannot be assessed purely based upon free particle dissolution. A steady state, dependent on temperature and on the acid concentration, was observed in the dissolution of particles from the surface even though the limit of solubility of free iron oxide particles had not been reached. Both the regeneration capacity and efficiency, with regards to the removal of iron oxide particles, was found to be temperature dependent, but was not affected by the acid concentration. This observation further suggests that the removal of the surface adhered particles does not follow the dissolution of free particles, which do exhibit a dependency on the acid concentration. In addition, changes in the permeability and in the pore structure of the filter medium were still observed after the bulk concentration of dissolved iron had reached a steady state. Consequently, the regeneration of the filter medium continued after the dissolution of particles from the surface had ceased. This observation suggests that internal changes take place at the final stages of regeneration. The regeneration process could, in theory, be divided into two, possibly overlapping, stages: (1) dissolution of surface-adhered particles, and (2) dissolution of extraneous compounds from within the pore structure. In addition to the fundamental knowledge generated during this thesis, tools to assess the effects of parameters on the regeneration of the ceramic filter medium are needed. It has become clear that the same tools used to estimate the dissolution of free particles cannot be used to estimate the regeneration of a filter medium unless only a robust characterisation of the order of regeneration efficiency is needed.

Comparison of wildlife and captivity rattlesnakes (Crotalus durissus terrificus) microbiota

The study evaluated and compared the aerobic microbiota from the oral cavity, cloaca and venom of Crotalus durissus terrificus snakes, recently caught from the wild and kept under quarantine (WQ), individual captivity (IC) and collective captivity (CC). Antimicrobial drug effectiveness on isolated agents also was assayed. From group I, II and III were isolated, respectively, 29 (63.04%), 38 (90.48%) and 21 (42.86%) microorganisms from the cloaca; 15 (32.61%), 3 (7.14%) and 25 (51.02%) microorganisms from the oral cavity; and, 2 (4.35%), 1 (2.38%) and 3 (6.12%) microorganisms from venom. The most frequent bacteria were Pseudomonas aeruginosa, Proteus vulgaris and Morganella morganii, with sensitivity to amikacin, gentamicin, norfloxacin, sulfazotrin and tobramycin. Snakes kept in semi-open captivity exhibited the fewest microorganisms in oral cavities, perhaps due to the environment in captivity, with different temperature gradients, running water, absence of daily handling, circulating air, possibility of moving around, daily cleaning, and sunlight access.

Sorption and desorption of picloram in soils under pastures in Brazil

The objective of this work was to determine the coefficients of sorption and desorption of picloram in Ultisol (PVA) and Oxisol (LVA), displaying different physical and chemical characteristics. Samples of soil were collected at the 0 20 cm depth in degraded pasture areas in Viçosa-MG. Firstly, the equilibrium time between the herbicide in solution and the herbicide which was sorbed in the soil was determined by the Batch Equilibrium method. The time required was 24 hours. Sorption and desorption studies were carried out under controlled laboratory conditions; the sorption evaluation consisted in adding 10.0 mL of herbicide solutions at different concentrations to tubes containing 2.00 g of soil, with vertical rotary agitation being maintained during the pre-determined equilibrium time. After centrifugation, supernatant extract cleaning and filtration, herbicide concentration was determined by high performance liquid chromatography (HPLC) with UV detection at 254 nm. Desorption was evaluated using the samples in the tubes after the sorption tests. The Freundlich model was used for interpretation of the sorption process. Ultisol showed higher adsorption coefficient (Kf a) compared with Oxisol, which may be attributed to the lower pH of the soil and its higher organic matter content. Desorption process occurred in both soils; the LVA allowed greater release of the previously sorbed molecules.

Nordic alcohol policy in Europe: the adaptation of Finland’s, Sweden’s and Norway’s alcohol policies to a new policy framework, 1994-2013

The purpose of this thesis is to study how and to which extent Finland, Sweden and Norway have adapted their alcohol policies to the framework imposed to them by the EU and the European Economic Area (EEA) since the mid-1990s. This is done by studying the underlying mechanisms that have influenced the formation of alcohol policy in the Nordic countries in that period. As a part of this analysis main differences in alcohol policies and alcohol consumption between the three countries are assessed and the phenomenon of cross-border trade with alcohol is discussed. The study examines also the development of Finnish, Norwegian and Swedish alcohol policies between 1994 and 2012 and compares the Nordic alcohol policies with other alcohol policies in Europe as the situation was in 2012. The time frame of the study spans from the mid-1990s to the end of 2013 and is divided into three phases. Studying the role of the Europeanisation process on the formation of alcohol policies has a key role in the analysis. Besides alcohol policies, the analyses comprise the development of alcohol consumption and cross-border trade with alcohol. In addition, a quantitative scale constructed to measure the strictness of alcohol policies is utilised in the analyses. The results from the scale are used to substantiate the qualitative analysis and to test whether the stereotypical view of a strict Nordic alcohol policy is still true. The results from the study clearly corroborate earlier findings on the significance of Europeanisation and the Single Market for the development of alcohol policies in the Nordic countries. Free movement of goods and unhindered competition have challenged the principle of disinterest and enabled private profit seeking in alcohol trade. The Single Market has also contributed to the increase in availability of alcohol and made it more difficult for the Nordic EU member states to maintain restrictive alcohol policies. All in all, alcohol policies in the Nordic countries are more liberal in 2013 than they were in 1994. Norway, being outside the EU has, however, managed to maintain a stricter alcohol policy than Finland and Sweden. Norway has also been spared from several EU directives that have affected Finland and Sweden, the most remarkable being the abolishment of the travellers’ import quotas for alcohol within the EU. Due to its position as a non-EU country Norway has been able to maintain high alcohol taxes without being subjected to a ”race to the bottom” regarding alcohol taxes the same way as Finland and Sweden. Finland distinguishes as the country that has liberalised its alcohol policy most during the study period. The changes in alcohol policies were not only induced by Europeanisation and the Single Market, but also by autonomous decision-making and political processes in the individual countries. Furthermore, the study shows that alcohol policy measures are implemented more widely in Europe than before and that there is a slow process of convergence going on regarding alcohol policy in Europe. Despite this, alcohol policies in the Nordic countries are still by far the strictest in all of Europe. From a Europeanisation perspective, the Nordic countries were clearly on the receiving end during the first two study phases (1994–2007), having more to adjust to rules from the EU and the Single Market than having success in uploading and shaping alcohol policy on the European and international field. During the third and final study phase (2008–2013), however, the Nordic countries have increasingly succeeded in contributing to shape the alcohol policy arena in the EU and also more widely through the WHOs global alcohol strategy. The restrictive Nordic policy tradition on which the current alcohol policies in Finland, Sweden and Norway were built on has still quite a solid evidence base. Although the basis of the restrictive alcohol policy has crumbled somewhat during the past twenty years and the policies have become less effective, nothing prevents it from being the base for alcohol policy in the Nordic countries even in the long term. In the future, all that is needed for an effective and successful alcohol policy is a solid evidence base, enough political will and support from the general public.

The adherence of Pseudomonas fluorescens to marble, granite, synthetic polymers, and stainless steel

The adherence of Pseudomonas fluorescens cells to nine food-processing contact surfaces was evaluated using the plate-count method. The surfaces include marble, granite, stainless steel, polyvinyl chloride, polyurethane, and silicone-coated cloth, which have been used only in a few studies concerning bacterial adherence. The number of cells adhered to the surfaces increased with contact time reaching 5.0-6.1 log CDM.cm-2 after 10 hours, which can be considered a well established adherence process. The number of adhered cells doubled in 29.5 minutes and 23.5 minutes on stainless steel and thin polyvinyl chloride-coated cloth, respectively. For the other surfaces, this value was 9.8 minutes on average. Marble, granite, thick polyvinyl-coated cloth, double-faced rugous polyurethane, and silicone-coated cloth were not different (p < 0.05) in their ability to adhere cells (CFU/cm²) after 2 and 10 hours. The surfaces that had higher percentage of similarity in the adhesion level and higher log CFU/cm² of adhered cells were double-faced rugous polyurethane, silicone-coated cloth, and granite. The surfaces showed very different microtopography characteristics when viewed using scanning electron microscopy. This experiment showed the importance of using appropriate materials for food contact during processing, which will affect the cleaning and sanitation procedures.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.

Inuit ethnobotany and ethnoecology in Nunavik and Nunatsiavut, northeastern Canada

Les habitats uniques de l'écotone forêt boréale-subarctique dans le nord du Canada subissent les contrecoups du changement climatique. Combinés aux effets de la mondialisation, les changements environnementaux touchent les Inuits de cette région et imposent des contraintes importantes sur leur mode de vie traditionnel, ce qui a des répercussions sur leur langue et les savoirs qui l'accompagnent. Cette étude compare deux aspects de l’ethnobiologie inuite : a) les noms et les utilisations des plantes par les Inuits de Nain, Nunatsiavut, suivis par une comparaison des utilisations avec la communauté inuite de Kangiqsualujjuaq, Nunavik, et b) une analyse des types de lieux ou d’habitats que les Inuits reconnaissent et nomment. Des interviews semi-dirigés ont été menés à Nain, Nunatsiavut et à Kangiqsualujjuaq, au Nunavik. Les plantes mentionnées sont utilisées comme aliment, thé, médecine, combustible, construction, nettoyage, et autres utilisations. Les deux communautés ont utilisé un nombre égal de plantes, avec des proportions équivalentes de taxons vasculaires/invasculaires, de formes de croissance (habitus), et d’espèces par catégorie d'utilisation. Les éléments du paysage les plus fréquemment rapportés sont d’ordre topographique, hydrologique ou écologique. L’intégration des concepts inuits, quant aux plantes et au paysage, à ceux de la science occidentale peut améliorer notre compréhension de l'écologie subarctique, aider à impliquer les acteurs locaux dans les décisions sur le développement de leur territoire et, conséquemment, modifier l'aménagement du territoire ainsi que les initiatives de conservation de la biodiversité. Ces concepts ont également des répercussions sur les stratégies d'adaptation face aux changements climatiques.

Sources and spread of thermophilic Campylobacter spp. during partial depopulation of broiler chicken flocks

The practice of partial depopulation or ‘thinning’, i.e. early removal of a proportion of birds from a commercial broiler flock, is a reported risk factor for Campylobacter colonization of residual birds because of the difficulty in maintaining biosecurity during the process. Therefore, the effect of this practice was studied in detail for 51 target flocks, each at a different growing farm belonging to one of seven major poultry companies throughout the United Kingdom. On 21 of these farms, the target flock was already colonized by Campylobacter and at slaughter all cecal samples examined were positive, with a mean of log10 8 cfu / g. A further 27 flocks became positive within 2 – 6 days of the start of thinning and had similarly high levels of cecal carriage at slaughter. Just prior to the thinning process, Campylobacter could be isolated frequently from the farm driveways, transport vehicles, equipment and personnel. Strains from seven such farms on which flocks became colonized after thinning were examined by PFGE typing. The study demonstrated an association between strains occurring at specific sampling sites and those isolated subsequently from the thinned flocks. There were also indications that particular strains had spread from one farm to another, when the farms were jointly company-owned and served by the same bird-catching teams and / or vehicles. The results highlighted the need for better hygiene control in relation to catching equipment and personnel, and more effective cleaning and disinfection of vehicles, and bird-transport crates.

Improving minimum quantity lubrication in CBN grinding using compressed air wheel cleaning

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of wildlife and captivity rattlesnakes (Crotalus durissus terrificus) microbiota

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of surfactants and polyethylene glycol on the activity and stability of a lipase from oilseeds of Pachira aquatica

Lipases from oilseeds have a great potential for commercial exploration as industrial enzymes. Lipases are used mixed with surfactants in cleaning and other formulated products, and accordingly, both components must be compatible with each other. This work presents the results of the effects of anionic, cationic and nonionic surfactants, polyethylene glycol and urea on the activity and stability of a lipase extracted of oilseeds from Pachira aquatica. The enzyme was purified and the spectrophotometric assays were done using p-nitrophenyl acetate (p-NPA) as substrate pH 7.5 and 25 degrees C. The activity was significantly enhanced by the cationic surfactant CTAB. Bile salts increased the lipase activity in the tested concentration range, whereas anionic and nonionic surfactants showed an inhibitory effect. Aqueous solutions of PEG activated the lipase and maximum activation (161%) occurred in PEG 12,000. This effect on lipase that can be due to exposition of some hydrophobic residues located in the vicinity of the active site or aggregation.

Effects of Nd : YAG and Er : YAG lasers on the sealing of root canal fillings

Objective: the ability of the laser irradiation to promote the cleaning and disinfection of the radicular canal system has become this type of treatment in a viable and real alternative in endodontics. The purpose of this study was to evaluate the apical marginal sealing of root canal fillings after the irradiation with the laser of Nd:YAG or of Er:YAG. Materials and Methods: Forty-two human, extracted single-rooted teeth had their crowns sectioned and the root canals prepared with a no. 70 K-file. Then, they were dried and divided into three groups according to canal wall treatment: group 1: the canals were filled with EDTA for 3 min, followed by irrigation with 1% sodium hypochlorite solution; group 2: the canal walls were irradiated with Nd:YAG laser; and group 3: the canal walls were irradiated with Er:YAG laser. Afterwards, the root canals were obturated by the lateral condensation technique. The roots were externally waterproof, except in the apical foramen and immerged in 2% methylene blue aqueous solution during 48 hours. Results: the results showed that the largest infiltrations happened in the group 3-Er:YAG (7.3 mm), proceeded by the group 1-EDTA (1.6 mm) and by the group 2-Nd:YAG (0.6 mm). The group Er:YAG differed statistically of the others (p < 0.05). Conclusion: It was concluded that the Er:YAG laser intracanal irradiation previously to the root canal filling must be used with caution until future research is define the best parameters for it's use.

The Brazilian Research Consortium on Obsessive-Compulsive Spectrum Disorders: recruitment, assessment instruments, methods for the development of multicenter collaborative studies and preliminary results

OBJETIVO: Descrever o recrutamento de pacientes, instrumentos de avaliação, métodos para o desenvolvimento de estudos colaborativos multicêntricos e os resultados preliminares do Consórcio Brasileiro de Pesquisa em Transtornos do Espectro Obsessivo-Compulsivo, que inclui sete centros universitários. MÉTODO: Este estudo transversal incluiu entrevistas semi-estruturadas (dados sociodemográficos, histórico médico e psiquiátrico, curso da doença e diagnósticos psiquiátricos comórbidos) e instrumentos que avaliam os sintomas do transtorno obsessivo-compulsivo (Escala para Sintomas Obsessivo-Compulsivos de Yale-Brown e Escala Dimensional para Sintomas Obsessivo-Compulsivos de Yale-Brown), sintomas depressivos (Inventário de Depressão de Beck), sintomas ansiosos (Inventário de Ansiedade de Beck), fenômenos sensoriais (Escala de Fenômenos Sensoriais da Universidade de São Paulo), juízo crítico (Escala de Avaliação de Crenças de Brown), tiques (Escala de Gravidade Global de Tiques de Yale) e qualidade de vida (questionário genérico de avaliação de qualidade de vida, Medical Outcome Quality of Life Scale Short-form-36 e Escala de Avaliação Social). O treinamento dos avaliadores consistiu em assistir cinco entrevistas filmadas e entrevistar cinco pacientes junto com um pesquisador mais experiente, antes de entrevistar pacientes sozinhos. A confiabilidade entre todos os líderes de grupo para os instrumentos mais importantes (Structured Clinical Interview for DSM-IV, Dimensional Yale-Brown Obsessive-Compulsive Scale, Universidade de São Paulo Sensory Phenomena Scale ) foi medida após seis entrevistas completas. RESULTADOS: A confiabilidade entre avaliadores foi de 96%. Até março de 2008, 630 pacientes com transtorno obsessivo-compulsivo tinham sido sistematicamente avaliados. A média de idade (±SE) foi de 34,7 (±0,51), 56,3% eram do sexo feminino e 84,6% caucasianos. Os sintomas obsessivo-compulsivos mais prevalentes foram os de simetria e os de contaminação. As comorbidades psiquiátricas mais comuns foram depressão maior, ansiedade generalizada e transtorno de ansiedade social. O transtorno de controle de impulsos mais comum foi escoriação neurótica. CONCLUSÃO: Este consórcio de pesquisa, pioneiro no Brasil, permitiu delinear o perfil sociodemográfico, clínico e terapêutico do paciente com transtorno obsessivo-compulsivo em uma grande amostra clínica de pacientes. O Consórcio Brasileiro de Pesquisa em Transtornos do Espectro Obsessivo-Compulsivo estabeleceu uma importante rede de colaboração de investigação clínica padronizada sobre o transtorno obsessivo-compulsivo e pode abrir o caminho para projetos semelhantes destinados a integrar outros grupos de pesquisa no Brasil e em todo o mundo.