Strategic Planning and Organizational Effectiveness in Social Service Organizations in Portugal

This study aims to understand the reality of social service organizations, the level of implementation of the strategic planning as well as the impact of its application on organizational effectiveness. At first, we will group organizations in clusters according to the level of strategic planning implementation and its degree of effectiveness. Secondly, we will analyse all the different groups. Given the growing number of social service organizations and the consequent complexity of their structures, it turns out the need for these organizations adopt formal management techniques. Strategic planning is a valuable strategic management tool and one of its main objectives is to make organizations more effective. Therefore, the research has been conducted in order to determine if strategic planning is implemented in social service organizations and which effects has its application on organizational effectiveness. The survey, applied to 220 social service organizations, allowed us to gather them into different clusters, showing that different levels of strategic planning determine distinct degrees of organizational efficiency. Finally, it should be noted that findings of this research may be essential to decision makers of these organizations, because it was shown that the adoption of strategic planning has a positive influence on organizational effectiveness of social service organizations.

Planning and verification of multipath routing protocols

Conventionally the problem of the best path in a network refers to the shortest path problem. However, for the vast majority of networks present nowadays this solution has some limitations which directly affect their proper functioning, as well as an inefficient use of their potentialities. Problems at the level of large networks where graphs of high complexity are commonly present as well as the appearing of new services and their respective requirements, are intrinsically related to the inability of this solution. In order to overcome the needs present in these networks, a new approach to the problem of the best path must be explored. One solution that has aroused more interest in the scientific community considers the use of multiple paths between two network nodes, where they can all now be considered as the best path between those nodes. Therefore, the routing will be discontinued only by minimizing one metric, where only one path between nodes is chosen, and shall be made by the selection of one of many paths, thereby allowing the use of a greater diversity of the present paths (obviously, if the network consents). The establishment of multi-path routing in a given network has several advantages for its operation. Its use may well improve the distribution of network traffic, improve recovery time to failure, or it can still offer a greater control of the network by its administrator. These factors still have greater relevance when networks have large dimensions, as well as when their constitution is of high complexity, such as the Internet, where multiple networks managed by different entities are interconnected. A large part of the growing need to use multipath protocols is associated to the routing made based on policies. Therefore, paths with different characteristics can be considered with equal level of preference, and thus be part of the solution for the best way problem. To perform multi-path routing using protocols based only on the destination address has some limitations but it is possible. Concepts of graph theory of algebraic structures can be used to describe how the routes are calculated and classified, enabling to model the routing problem. This thesis studies and analyzes multi-path routing protocols from the known literature and derives a new algebraic condition which allows the correct operation of these protocols without any network restriction. It also develops a range of software tools that allows the planning and the respective verification/validation of new protocols models according to the study made.

La institucionalización de la Comunidad Regional Punilla (Provincia de Córdoba): estudio y promoción de metodologías de diseño participativo y gestión asociada de políticas públicas para el desarrollo. The institution of Punilla Regional Community: study and promotion of participative metodologies for the associated planning and management of development policies.

Durante el período 2006-2008, las actividades de investigación y asistencia técnica de este equipo enfatizaron en la necesaria práctica social y política de horizontalidad en las relaciones, en la 'dimensión intersubjetiva o relacional de la regionalización' (Cáceres, 2006) en el marco de la Comunidad Regional Punilla (CRP), considerando a la identidad regional como un condicionante relevante de la 'construcción de la región como unidad de acción(Boisier, 2003). Así, durante ese período, se ha ido conformando un espacio 'regional' de composición multiactoral, social y gubernamental, para el trabajo asociativo (PROFIM, SIP, UCC 2007, 2008). Con el propósito de profundizar el Programa, este proyecto propone el fortalecimiento institucional de la CRP a través de la formalización del escenario participativo regional (Poggiese, 2001, 2002) para el diseño y gestión asociada de políticas de desarrollo. Tales propósitos y mecanismos están previstos en la Ley Orgánica de Regionalización de la Provincia de Córdoba (9.206/04) y en las normativas regionales derivadas de ésta a través de la figura del 'Consejo de la Sociedad Civil'. Con base en la observación del proceso desarrollado en Punilla desde el año 2006, esta propuesta suscribe el carácter interdisciplinario e intersectorial de la red social y política en la que se sustentará el Consejo y la lógica 'procesal y consensual' de su construcción, considerando, además, la nueva configuración del mapa político de la CRP a partir de los resultados electorales del año 2008 en tanto cambios estructurales en la relación gobierno y oposición que se presentan como una oportunidad para desarrollar los espacios públicos participativos que la sociedad regional puede ocupar para canalizar institucionalmente sus demandas. El proyecto busca 'analizar' pero también 'promover' el proceso de cambio político y social en marcha para facilitar su 'ampliación democrática' (Redín y Moroni, 2003), reflexionado críticamente y poniendo en cuestión algunos de los supuestos que han caracterizado a la retórica de la regionalización provincial: la existencia de una sociedad civil debidamente organizada en cada una de las regiones, cuya concurrencia al proceso decisorio puede asegurarse una vez 'abiertos' -formalizados- los canales de participación; la superación de la dirección bottom up en los procesos de toma de decisiones y la preeminencia de modalidades de 'articulación intermunicipal' para la gestión de políticas allí donde la Ley y las ordenanzas locales declaran establecida una 'Comunidad Regional'. El cuestionamiento de dichos supuestos sustenta, en definitiva, las preguntas que delimitan los temas- problema que se abordarán a partir de este trabajo.

A comparative analysis of sustainable tourism, planning and development between Sligo and Donegal County Councils

Sustainable Development requires appropriate and continuous planning and management of economic, socio cultural and environmental resources. Tourism planning calls for continuous collaboration among tourism agencies, local authorities and local communities for success of the industry. While evidence suggests that tourism planning has been extensively documented, it is apparent that Donegal and Sligo County Councils have, in some cases failed to adequately address the significance of planning of the tourism industry for the North West of Ireland. This was investigated through interviews with chief planners of Donegal and Sligo county councils and was conducted in conjunction with the analysis of county development plans; which were formulated by both organisations involved in this study. Evidence suggests that although tourism is extensively documented by Donegal and Sligo county councils, neither of the two local authorities have developed implementation strategies to facilitate the promotion of sustainable tourism development. This research compares and analyses Donegal and Sligo county councils and how they plan for sustainable tourism development. It outlines the role of the county councils in relation to tourism planning and how Donegal and Sligo compare in how they plan for such a significant industry in the North West o f Ireland. It highlights the importance of implementation tools and methods and offers future directions that can assist in the development of sustainable tourism.

Are virtual planning and guided surgery for head and neck reconstruction economically viable?

PURPOSE: Virtual planning and guided surgery with or without prebent or milled plates are becoming more and more common for mandibular reconstruction with fibular free flaps (FFFs). Although this excellent surgical option is being used more widely, the question of the additional cost of planning and cutting-guide production has to be discussed. In capped payment systems such additional costs have to be offset by other savings if there are no special provisions for extra funding. Our study was designed to determine whether using virtual planning and guided surgery resulted in time saved during surgery and whether this time gain resulted in self-funding of such planning through the time saved. MATERIALS AND METHODS: All consecutive cases of FFF surgery were evaluated during a 2-year period. Institutional data were used to determine the price of 1 minute of operative time. The time for fibula molding, plate adaptation, and insetting was recorded. RESULTS: During the defined period, we performed 20 mandibular reconstructions using FFFs, 9 with virtual planning and guided surgery and 11 freehand cases. One minute of operative time was calculated to cost US $47.50. Multiplying this number by the time saved, we found that the additional cost of virtual planning was reduced from US $5,098 to US $1,231.50 with a prebent plate and from US $6,980 to US $3,113.50 for a milled plate. CONCLUSIONS: Even in capped health care systems, virtual planning and guided surgery including prebent or milled plates are financially viable.

Planning and conducting focus group research with nurses.

Focus groups are increasingly popular in nursing research. However, proper care and attention are critical to their planning and conduct, particularly those involving nursing staff. This article uses data gleaned from prior research to address the complexities present in clinical settings when conducting focus groups with nurses. Applying their combined experiences of conducting studies with nursing staff, the authors present a data-derived approach to thorough preparation and successful implementation of focus group research, offering a unique contribution to the literature regarding this research strategy.

Environmental characteristics of the cemeteries of Buenos Aires City (Argentina) and infestation levels of Aedes aegypti (Diptera: Culicidae)

Cemeteries with many water-filled containers, flowers, sources of human blood, and shade are favorable urban habitats for the proliferation of Aedes aegypti, a vector of yellow fever and dengue. A total of 22,956 containers was examined in the five cemeteries of the city of Buenos Aires, Argentina. The vector was found in four cemeteries that showed an average infestation level of 5.5% (617 positive out of 11,196 water-filled containers). The four cemeteries positive for Ae. aegypti showed significantly different (p<0.01) infestation levels. Vegetation cover and percentage of infestation were significantly correlated (p<0.01), but neither cemetery area nor number of available containers were significantly related to the proportion of positive vases. Our results suggest that the cemeteries of Buenos Aires represent a gradient of habitat favorableness for this vector species, some of which may act as foci for its proliferation and dispersal.

Comparisons of preoperative three-dimensional planning and surgical reconstruction in primary cementless total hip arthroplasty.

Reconstruction of important parameters such as femoral offset and torsion is inaccurate, when templating is based on plain x-rays. We evaluate intraoperative reproducibility of pre-operative CT-based 3D-templating in a consecutive series of 50 patients undergoing primary cementless THA through an anterior approach. Pre-operative planning was compared to a postoperative CT scan by image fusion. The implant size was correctly predicted in 100% of the stems, 94% of the cups and 88% of the heads (length). The difference between the planned and the postoperative leg length was 0.3 + 2.3 mm. Values for overall offset, femoral anteversion, cup inclination and anteversion were 1.4 mm ± 3.1, 0.6° ± 3.3°, -0.4° ± 5° and 6.9° ± 11.4°, respectively. This planning allows accurate implant size prediction. Stem position and cup inclination are accurately reproducible.

Driving Retirement Planning and making it work, August 2, 2007

The value of driving We as Americans - and especially as Iowans - value the independence of getting around in our own vehicles and staying connected with our families and communities. The majority of older Iowans enjoy a more active, healthy and longer life than previous generations. Freedom of mobility shapes our quality of life. With aging, driving becomes an increasing concern for older Iowans and their families. How we deal with changes in our driving ability and, eventually, choose when and how to retire from driving, will affect our safety and our quality of life.

A Local DLP-GIS-LP system for geographically decentralized wood procurement planning and decision making

Summary

Report on a review of selected application controls over the Iowa State University of Science and Technology Facilities Planning and Management - Facilities Administrative Management Information System for the period of April 18, 2011 through May 16, 2011

Report on a review of selected application controls over the Iowa State University of Science and Technology Facilities Planning and Management - Facilities Administrative Management Information System for the period of April 18, 2011 through May 16, 2011

Audit report of the State University of Iowa, Iowa City, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2012 and 2011

Audit report of the State University of Iowa, Iowa City, Iowa, and its discretely presented component unit as of and for the years ended June 30, 2012 and 2011

Comparisons of Preoperative Three-Dimensional Planning and Surgical Reconstruction in Primary Cementless Total Hip Arthroplasty

La planification scanographique (3D) a démontré son utilité pour une reconstruction anatomique plus précise de la hanche (longueur du fémur, centre de rotation, offset, antéversion et rétroversion). Des études ont montré que lors de la planification 2D 50% seulement correspondaient à l'implant définitif du fémur alors que dans une autre étude ce taux s'élevait à 94% pour une planification 3D. Les erreurs étaient liées à l'agrandissement des radiographies. L'erreur sur la taille de la tige est liée à l'estimation inadéquate de la morphologie osseuse ainsi qu'à la densité osseuse. L'erreur de l'antéversion, augmentée par l'inclinaison du bassin, a pu être éliminée par la planification 3D et l'offset restauré dans 98%. Cette étude est basée sur une nouvelle technique de planification scanographique en trois dimensions pour une meilleure précision de la reconstruction de la hanche. Le but de cette étude est de comparer l'anatomie post-opératoire à celle préopératoire en comparant les tailles d'implant prévu lors de la planification 3D à celle réellement utilisée lors de l'opération afin de déterminer l'exactitude de la restauration anatomique avec étude des différents paramètres (centre de rotation, densité osseuse, L'offset fémoral, rotations des implants, longueur du membre) à l'aide du Logiciel HIP-PLAN (Symbios) avec évaluation de la reproductibilité de notre planification 3D dans une série prospective de 50 patients subissant une prothèse totale de hanche non cimentée primaire par voie antérieure. La planification pré-opératoire a été comparée à un CTscan postopératoire par fusion d'images. CONCLUSION ET PRESPECTIVE Les résultats obtenus sont les suivants : La taille de l'implant a été prédit correctement dans 100% des tiges, 94% des cupules et 88% des têtes (longueur). La différence entre le prévu et la longueur de la jambe postopératoire était de 0,3+2,3 mm. Les valeurs de décalage global, antéversion fémorale, inclinaison et antéversion de la cupule étaient 1,4 mm ± 3,1, 0,6 ± 3,3 0 -0,4 0 ± 5 et 6,9 ° ± 11,4, respectivement. Cette planification permet de prévoir la taille de l'implant précis. Position de la tige et de l'inclinaison de la cupule sont exactement reproductible. La planification scanographique préopératoire 3D permet une évaluation précise de l'anatomie individuelle des patients subissant une prothèse totale de hanche. La prédiction de la taille de l'implant est fiable et la précision du positionnement de la tige est excellente. Toutefois, aucun avantage n'est observée en termes d'orientation de la cupule par rapport aux études impliquant une planification 2D ou la navigation. De plus amples recherches comparant les différentes techniques de planification pré-opératoire à la navigation sont nécessaire.