An error free passive UHF RFID system using a new form of wireless signal distribution

A wide area and error free ultra high frequency (UHF) radio frequency identification (RFID) interrogation system based on the use of multiple antennas used in cooperation to provide high quality ubiquitous coverage, is presented. The system uses an intelligent distributed antenna system (DAS) whereby two or more spatially separated transmit and receive antenna pairs are used to allow greatly improved multiple tag identification performance over wide areas. The system is shown to increase the read accuracy of 115 passive UHF RFID tags to 100% from <60% over a 10m × 8m open plan office area. The returned signal strength of the tag backscatter signals is also increased by an average of 10dB and 17dB over an area of 10m 8m and 10m × 4m respectively. Furthermore, it is shown that the DAS RFID system has improved immunity to tag orientation. Finally, the new system is also shown to increase the tag read speed/rate of a population of tags compared with a conventional RFID system. © 2012 IEEE.

Wide Area Passive UHF RFID System using Antenna Diversity Combined with Phase and Frequency Hopping

This paper presents a long range and effectively error-free ultra high frequency (UHF) radio frequency identification (RFID) interrogation system. The system is based on a novel technique whereby two or more spatially separated transmit and receive antennas are used to enable greatly enhanced tag detection performance over longer distances using antenna diversity combined with frequency and phase hopping. The novel technique is first theoretically modelled using a Rician fading channel. It is shown that conventional RFID systems suffer from multi-path fading resulting in nulls in radio environments. We, for the first time, demonstrate that the nulls can be moved around by varying the phase and frequency of the interrogation signals in a multi-antenna system. As a result, much enhanced coverage can be achieved. A proof of principle prototype RFID system is built based on an Impinj R2000 transceiver. The demonstrator system shows that the new approach improves the tag detection accuracy from <50% to 100% and the tag backscatter signal strength by 10dB over a 20 m x 9 m area, compared with a conventional switched multi-antenna RFID system.

An Error Free Passive UHF RFID System using a New Form of Wireless Signal Distribution

A wide area and error free ultra high frequency (UHF) radio frequency identification (RFID) interrogation system based on the use of multiple antennas used in cooperation to provide high quality ubiquitous coverage, is presented. The system uses an intelligent distributed antenna system (DAS) whereby two or more spatially separated transmit and receive antenna pairs are used to allow greatly improved multiple tag identification performance over wide areas. The system is shown to increase the read accuracy of 115 passive UHF RFID tags to 100% from <60% over a 10m x 8m open plan office area. The returned signal strength of the tag backscatter signals is also increased by an average of 10dB and 17dB over an area of 10m x 8m and 10m x 4m respectively. Furthermore, it is shown that the DAS RFID system has improved immunity to tag orientation. Finally, the new system is also shown to increase the tag read speed/rate of a population of tags compared with a conventional RFID system.

A Novel Passive UHF RFID Real Time Location Sensing System

Ubiquitous in-building Real Time Location Systems (RTLS) today are limited by costly active radio frequency identification (RFID) tags and short range portal readers of low cost passive RFID tags. We, however, present a novel technology locates RFID tags using a new approach based on (a) minimising RFID fading using antenna diversity, frequency dithering, phase dithering and narrow beam-width antennas, (b) measuring a combination of RSSI and phase shift in the coherent received tag backscatter signals and (c) being selective of use of information from the system by, applying weighting techniques to minimise error. These techniques make it possible to locate tags to an accuracy of less than one metre. This breakthrough will enable, for the first time, the low-cost tagging of items and the possibility of locating them at relatively high precision.

Passive UHF RFID Interrogation System Using Wireless RFID Repeater Nodes

This paper presents a new wireless radio frequency identification (RFID) repeater system, facilitating remote interrogation without the need for arrays of wired antennas, despite using entirely passive, low-cost ultra high frequency (UHF) RFID tags. The proposed system comprises a master RFID reader with both transmit and receive functions, and multiple RFID repeaters to receive, amplify and retransmit tag-to-reader and reader-to-tag communications. This expands the area over which the master RFID reader may provide coverage for a given maximum transmit power at each antenna. We first demonstrate a single hop wireless repeater system to allow similar read performance to a standard commercial passive UHF RFID reader. Finally, a proof of principle system demonstrates that a single wireless repeater node can allow an extension in range.

Channel characterisation for indoor wearable active RFID at 868 MHz

Active radio-frequency identification systems that are used for the localisation and tracking of people will be subject to the same body centric processes that impact other forms of wearable communications. To achieve the goal of creating body worn tags with multiyear life spans, it will be necessary to gain an understanding of the channel conditions which are likely to impact the reader-tag interrogation process. In this paper we present the preliminary results of an indoor channel measurement campaign conducted at 868 MHz aimed at understanding and modelling signal characteristics for a wrist-worn tag. Using a model selection process based on the Akaike Information Criterion, the lognormal distribution was selected most often to describe the received signal amplitude. Parameter estimates are provided so that the channels investigated in this study may be readily simulated.

Localization Algorithm Performance in Ultra Low Power Active RFID Based Patient Tracking

Indoor personnel localization research has generated a range of potential techniques and algorithms. However, these typically do not account for the influence of the user's body upon the radio channel. In this paper an active RFID based patient tracking system is demonstrated and three localization algorithms are used to estimate the location of a user within a modern office building. It is shown that disregarding body effects reduces the accuracy of the algorithms' location estimates and that body shadowing effects create a systematic position error that estimates the user's location as closer to the RFID reader that the active tag has line of sight to.

A hybrid mutual authentication protocol for RFID

Out of the large number of RFID security protocols proposed in recent years none have proven to be truly secure and the creation of a truly secure security protocol for systems employing low cost RFID tags remains an open problem. In this paper we develop and present a RFID security protocol which not only allows mutual authentication and secure transmission of data between the reader and tag but is also secure against a number of common attacks.

Mutual authentication protocol for networked RFID systems

In this paper we address the problem of securing networked RFID applications. We develop and present a RFID security protocol that allows mutual authentication between the reader and tag as well as secure communication of tag data. The protocol presented uses a hybrid method to provide strong security while ensuring the resource requirements are low. To this end it employs a mix of simple one way hashing and low-cost bit wise operations. Our protocol ensures the confidentiality and integrity of all data being communicated and allows for reliable mutual authentication between tags and readers. The protocol presented is also resistant to a large number of common attacks.

A novel mutual authentication scheme with minimum disclosure for rfid systems

In this paper we present a novel approach to authentication and privacy in RFID systems based on the minimum disclosure property and in conformance to EPC Class-1 Gen-2 specifications. We take into account the computational constraints of EPC Class-1 Gen-2 passive RFID tags and only the cyclic redundancy check (CRC) and pseudo random number generator (PRNG) functions that passive RFID tags are capable of are employed. Detailed security analysis of our scheme shows that it can offer robust security properties in terms of tag anonymity and tag untraceability while at the same time being robust to replay, tag impersonation and desynchronisation attacks. Simulations results are also presented to study the scalability of the proposed scheme and its impact on authentication delay.

Securing RFID systems from SQLIA

While SQL injection attacks have been plaguing web applications for years the threat they pose to RFID systems have only identified recently. Because the architecture of web systems and RFID systems differ considerably the prevention and detection techniques proposed for web applications are not suitable for RFID systems. In this paper we propose a system to secure RFID systems against tag based SQLIA. Our system is optimized for the architecture of RFID systems and consists of a query structure matching technique and tag data cleaning technique. The novelty of the proposed system is that it's specifically aimed at RFID systems and has the ability to detect and prevent second order injections which is a problem most current solutions haven't addressed. The preliminary evaluation of our query matching technique is very promising showing very high detection rate with minimal false positives.

A serverless ultra-lightweight secure search protocol for EPC Class-1 Gen-2 UHF RFID tags

Radio Frequency Identification (RFID) is a technology that enables the non-contact, automatic and unique identification of objects using radio waves. Its use for commercial applications has recently become attractive with RFID technology seen as the replacement for the optical barcode system that is currently in widespread use. RFID has many advantages over the traditional barcode and these advantages have the potential to significantly increase the efficiency of decentralised business environments such as logistics and supply chain management. One of the important features of an RFID system is its ability to search for a particular tag among a group of tags. In order to ensure the privacy and security of the tags, the search has to be conducted in a secure fashion. To our knowledge not much work has been done in this secure search area of RFID. The limited work that has been done does not comply with the EPC Class-1 Gen-2 standards since most of them use expensive hash operations or sophisticated encryption schemes that cannot be implemented on low-cost passive tags that are highly resource constrained. Our work aims to fill this gap by proposing a serverless ultra-lightweight secure search protocol that does not use the expensive hash functions or any complex encryption schemes but achieves compliance with EPC Class-1 Gen-2 standards while meeting the required security requirements. Our protocol is based on XOR encryption and random numbers - operations that are easily implemented on low-cost RFID tags. Our protocol also provides additional protection using a blind-factor to prevent tracking attacks. Since our protocol is EPC Class-1 Gen-2 compliant it makes it possible to implement it on low-cost passive RFID tags.

A secure search protocol based on Quadratic Residues for EPC Class-1 Gen-2 UHF RFID tags

Radio Frequency Identification (RFID) is a technological revolution that is expected to soon replace barcode systems. One of the important features of an RFID system is its ability to search for a particular tag among a group of tags. This task is quite common where RFID systems play a vital role. To our knowledge not much work has been done in this secure search area of RFID. Also, most of the existing work do not comply with the C1G2 standards. Our work aims to fill that gap by proposing a protocol based on Quadratic Residues property that does not use the expensive hash functions or any complex encryption schemes but achieves total compliance with industry standards while meeting the security requirements.