Effects of superimposed pulse bias on TiN coating in cathodic arc deposition

Orthogonal designs are used to investigate the main factors when doing experiments in which pulse bias is superimposed on d.c. bias during cathodic are deposition of TiN. Pulse peak, duty cycle, frequency, direct voltage, are current and pressure all are investigated when coating TiN on HSS substrates. Roughness, surface micrograph, microhardness and thickness are tested. By analysis of variance, it is shown that pressure and frequency are the main factors. R-a and droplet density of the film with (d.c. + pulse) bias decrease. A simple explanation for the result is suggested.

Properties of tetrahedral amorphous carbon deposited by a filtered cathodic vacuum arc

The properties of a highly sp3 bonded form of amorphous carbon denoted ta-C deposited from a filtered cathodic vacuum arc (FCVA) are described as a function of ion energy and deposition temperature. The sp3 fraction depends strongly on ion energy and reaches 85% at an ion energy of 100 eV. Other properties such as density and band gap vary in a similar fashion, with the optical gap reaching a maximum of 2.3 eV. These films are very smooth with area roughness of order 1 nm. The sp3 fraction falls suddenly to almost zero for deposition above about 200 °C.

Two-dimensional Cartesian air-gap element (CAGE) for dynamic finite-element modeling of electrical machines with a flat air gap

This paper extends the air-gap element (AGE) to enable the modeling of flat air gaps. AGE is a macroelement originally proposed by Abdel-Razek et al.for modeling annular air gaps in electrical machines. The paper presents the theory of the new macroelement and explains its implementation within a time-stepped finite-element (FE) code. It validates the solution produced by the new macroelement by comparing it with that obtained by using an FE mesh with a discretized air gap. It then applies the model to determine the open-circuit electromotive force of an axial-flux permanent-magnet machine and compares the results with measurements.

Cage culture in reservoirs in India (a handbook)

This document is part of a series of 5 technical manuals produced by the Challenge Program Project CP34 “Improved fisheries productivity and management in tropical reservoirs”. The reservoirs of India have a combined surface area of 3.25 million hectares (ha), mostly in the tropical zone, which makes them the country¡¯s most important inland water resource, with huge untapped potential. The prime objective of cage culture discussed here is to rear fingerlings measuring >100 millimetres (mm) in length, especially carp, for stocking reservoirs. The manual discusses various aspects of cage culture from site selection to its economic benefits. (PDF contains 27 pages)

Producing tilapia in small cage in West Africa

This document is part of a series of 5 technical manuals produced by the Challenge Program Project CP34 “Improved fisheries productivity and management in tropical reservoirs”. The Water Research Institute (WRI) in Akosombo, Ghana, is working to bring cage aquaculture technology to smallholder farmers. The stocking, feeding and cage-construction technology piloted by WRI is now being widely adopted in the Lower Volta basin in Ghana. The results of WRI research over the period 2005-2009 are presented here as a guide to potential investors. (PDF contains 19 pages)

The improved management of small-scale cage culture in Asia: final technical report

The purpose of the project is to develop sustained small-scale cage fish culture in inland and coastal waters through improved understanding of the social, institutional and resource environment of resource poor groups. Two Asian countries, Bangladesh (inland systems) and Vietnam (marine), were studied with this workshop bringing together both sides of the project together with representatives of collaborative institutions, government departments and universities. Addressing the overall aim of producing guidelines for the planning and extension of cage aquaculture in Asia a combination of group work and plenary discussion was conducted producing the following outputs. 1) An assessment of cage aquaculture potential, 2) Development options for small-scale cage culture, 3) A review of tools and methodologies and 4) Policy initiatives for sustainable cage culture development. Key issues raised were the use of outputs as a guide to be adapted to regional circumstances to facilitate farmer and extension worker discussion and not as a rigid methodology. The degree of linkage between development, research and government institutions was also considered a crucial factor in benefiting the research and development of cage culture at the local, regional and national level and vital in affecting the future policies by both development and government institutions. [PDF contains 242 pages]

Preliminary studies on bamboo floating cage and net enclosure culture in Kainji Lake basin

The main objective of this paper is to introduce bamboo floating cage and net enclosure fish culture technology aimed at producing fish from almost all available inland bodies of water in Nigeria. The experimental approach embarked upon at Kainji Lake Research Institute is discussed. Results obtained from these experiments would help in identifying the inherent problems of this culture system and in determining the urgently needed information that will serve as management and production guidelines for adapting the technology to local conditions of varying ecological characteristics in Nigeria. Ultimately, the project is aimed at increasing the productivity of fishermen/fish farmers and hastening the development of rural communities

Effects of fish-meal, cow blood-meal, and sorghum diets on food utilization and growth of cage cultured Sarotherodon niloticus

The growth responses and feed utilization of Sarotherodon niloticus held in metal cages in a pond and fed diets containing fish-meal, cow blood-meal or sorghum was studied. Results indicate that the best growth, feed conversion and protein efficiency ratio were obtained with the diet containing 60% fish-meal. The growth performance of fish on 40% fish-meal, and 40% and 60% blood meal were not significantly different, and were quite close to the performance with 60% fish-meal. The growth and food utilization of fish on 84% sorghum diet was significantly lower than the rest. The Caged fish without supplemental feeding had a light gain in weight. All fish with supplemental feeding appeared healthy. It is concluded that cow blood meal at 40% or 60% inclusion in diet can adequately replace fish-meal in S. niloticus supplemental diet in pond culture

Commercial cage fish culture

With increasing emphasis in Nigeria on aquaculture as an alternative to dwindling artisanal fishing and scarce foreign exchange for fish import, cage fish culture, is a more profitable aquaculture practice than pond culture. It appears to be one of the most viable business ventures with minimum risks. It is a highly recommendable project

A review of diseases associated with cage culture systems: diagnosis and control in smale scale fish farming

Fish cage culture is a rapid aquacultural practice of producing fish with more yield compared to traditional pond culture. Several species cultured by this method include Cyprinus carpio, Orechromis niloticus, Sarotherodon galilaeus, Tilapia zilli, Clarias lazera, C. gariepinus, Heterobranchus bidorsalis, Citharinus citharus, Distochodus rostratus and Alestes dentes. However, the culture of fish in cages has some problems that are due to mechanical defects of the cage or diseases due to infection. The mechanical problems which may lead to clogged net, toxicity and easy access by predators depend on defects associated with various types of nets which include fold sieve cloth net, wire net, polypropylene net, nylon, galvanized and welded net. The diseases problems are of two types namely introduced diseases due to parasites. The introduced parasites include Crustaseans, Ergasilus sp. Argulus africana, and Lamprolegna sp, Helminth, Diplostomulum tregnna: Protozoan, Trichodina sp, Myxosoma sp, Myxobolus sp. the second disease problems are inherent diseases aggravated by the very rich nutrient environment in cages for rapid bacterial, saprophytic fungi, and phytoplanktonic bloom resulting in clogging of net, stagnation of water and low biological oxygen demand (BOD). The consequence is fish kill, prevalence of gill rot and dropsy conditions. Recommendations on routine cage hygiene, diagnosis and control procedures to reduce fish mortality are highlighted

Intensive small scale cage, pen and enclosure fish production systems: towards 2010

A brief review of most of the publications by the author and other relevant workers on the three water-based fish culture systems was made. The present status of the culture systems in the National Food/Fish Programmes was highlighted. Strategies were advanced towards a successful implementation of the intensive water-based culture systems project as a contribution towards alleviating poverty, hunger and malnutrition under the concept of VISION 2010