White paper sobre Open Source, Open Access, open Standards e o futuro da catalogação

The discussions on the future of cataloging has received increased attention in the last ten years, mainly due to the impact of rapid development of information and communication technologies in the same period, which has provided access to the Web anytime, anywhere. These discussions revolve around the need for a new bibliographic framework to meet the demand of this new reality in the digital environment, ie how libraries can process, store, deliver, share and integrate their collections (physical, digital or scanned), in current post-PC era? Faced with this question, Open Access, Open Source and Open Standards are three concepts that need to receive greater attention in the field of Library and Information Science, as it is believed to be fundamental elements for the change of paradigm of descriptive representation, currently based conceptually on physical item rather than intellectual work. This paper aims to raise and discuss such issues and instigate information professionals, especially librarians, to think, discuss and propose initiatives for such problems, contributing and sharing ideas and possible solutions, in multidisciplinary teams. At the end is suggested the effective creation of multidisciplinary and inter-institutional study groups on the future of cataloging and its impact on national collections, in order to contribute to the area of descriptive representation in national and international level

Identificación Automatizada de Minerales de Mena con Microscopio de Reflexión: Uso de Imágenes Multiespectrales

Se ha desarrollado un sistema capaz de caracterizar las menas metálicas por sus propiedades de reflexión para lograr su reconocimiento automatizado sobre probetas pulidas. Establecida la proporcionalidad entre los valores de reflectancia característicos de las menas y los niveles de gris en imagen digital (Berrezueta y Castroviejo, 2007), se usan ahora medidas multiespectrales

Estudio de la viabilidad técnica y económica del establecimiento de una terminal de contenedores automatizada en el Mediterráneo español

Esta Tesis analiza, en primer lugar, las posibilidades y condiciones de los puertos españoles de Algeciras, Valencia y Barcelona para acoger en el futuro una terminal totalmente automatizada (robotizada) de contenedores con una capacidad aproximada de 1,3-1,4 millones de contenedores/año o 2 millones de TEU/año. Entre las posibles amenazas y oportunidades que pueden afectar al actual tráfico de esos puertos, la Tesis se centra en el desvío del tráfico de contenedores de transbordo, la sustitución de los tráficos marinos por tráficos ferroviarios, la posibilidad de convertir al Mediterráneo español en la puerta de entrada de productos asiáticos, el cambio de la ruta Asia-Europa a través del Canal de Suez por la ruta Asia-Europa a través del Ártico, la posibilidad de circunvalar África para evitar el Canal de Suez y la próxima apertura de nuevo Canal de Panamá ampliado. La Tesis describe el Estado del Arte de la tecnología para las terminales de contenedores automatizadas que pudiera ser aplicada en nuestro país y desarrolla una terminal automatizada con la capacidad ya mencionada de 2 millones de TEU/año. El tema del ferrocarril en las terminales de contenedores, como futura lanzadera para la proyección de la influencia de los puertos, está desarrollado como una parte esencial de una terminal de contenedores. Se investiga, también, la automatización total o parcial en la transferencia de mercancía buque-ferrocarril La Tesis también desarrolla una metodología para desglosar los costes e ingresos de una terminal automatizada. A través de esos costes e ingresos se va desarrollando, mediante la utilización de hojas Excel relacionadas, el método para mostrar la estructuración de los hitos económicos fundamentales hasta llegar al VAN, TIR y Periodo de Retorno de la Inversión como elementos clave para la calificación de la terminal como proyecto de inversión. La Tesis realiza la misma metodología para la terminal convencional de contenedores más habitual en el Mediterráneo español: la terminal que utiliza sistemas de grúas sobre ruedas (RTG) en el patio de contenedores. Por último, la Tesis establece la comparativa entre los dos tipos de terminales analizadas: la convencional y la automatizada, basándose en el coste de la mano de obra portuaria como elemento clave para dicha comparativa. Se establece la frontera que determina en qué niveles de coste del personal portuario la terminal automatizada es mejor proyecto de inversión que la terminal convencional con RTG. Mediante la creación de la metodología descrita, la Tesis permite: - La comparativa entre diferentes tipos de terminales - La posibilidad de analizar un modelo de terminal variando sus parámetros fundamentales: costes de los estibadores, nuevas tecnologías de manipulación, diferentes rendimientos, variación de los ingresos, etc. - Descubrir el modelo más rentable de una futura terminal mediante la comparación de las diferentes tecnologías que se puedan emplear para la construcción de dicha terminal ABSTRACT This Thesis examines, first, the possibilities and conditions of the Spanish ports of Algeciras, Valencia and Barcelona to host in the future a fully automated container terminal (robotized) with a capacity of approximately 1.3-1.4 million containers/year or 2 million TEU/year. Among the potential threats and opportunities that may affect the current traffic of these ports, the thesis focuses on the diversion of container transhipment traffic, the replacing of marine traffic by rail traffic, the possibility of converting the Spanish Mediterranean in the door input of Asian products, the changing of the Asia-Europe route through the Suez Canal by the Asia-Europe route through the Arctic, the possibility of circumnavigating Africa to avoid the Suez Canal and the upcoming opening of the new expanded Canal of Panama. The Thesis describes the state-of-the-art technology for automated container terminals that could be applied in our country and develops an automated terminal with the listed capacity of 2 million TEUs / year. The use of the railway system in container terminals to be used as future shuttle to the projection of the influence of the ports is developed as an essential part of a container terminal. We also investigate the total or partial automation in transferring goods from ship to rail. The Thesis also develops a methodology to break down the costs and revenues of an automated terminal. Through these costs and revenues is developed, using linked Excel sheets, the method to show the formation of structured key economic milestones until the NPV, IRR and Period of Return of Investment as key to determining the terminal as an investment project. The Thesis takes the same methodology for the conventional container terminal more common in the Spanish Mediterranean: the terminal using rubber tyred cranes (RTG) in the container yard. Finally, the Thesis provides a comparison between the two types of analyzed terminals: conventional and automated, based on the cost of stevedores labor as a key point for that comparison. It establishes the boundary that determines what levels of stevedore costs make automated terminal to be better investment project than a conventional terminal using RTG. By creating the above methodology, the Thesis allows: - The comparison between different types of terminals - The possibility of analyzing a model of terminal varying its key parameters: stevedores costs, new technologies of container handling, different loading/unloading rates, changes in incomes and so on - Unveil the most profitable model for a future terminal by comparing the different technologies that can be employed for the construction of that terminal

Caracterización automatizada de texturas de menas mediante análisis digital de imagen para su aplicación geometalúrgica

La mineralogía de procesos se ha convertido en los últimos años en una herramienta indispensable dentro del ámbito minero-metalúrgico debido fundamentalmente a la emergencia de la Geometalurgia. Esta disciplina en auge, a través de la integración de datos geológicos, mineros y metalúrgicos, proporciona la información necesaria para que el circuito de concentración mineral pueda responder de manera rápida y eficaz a la variabilidad mineralógica inherente a la geología del yacimiento. Para la generación del modelo geometalúrgico, la mineralogía de procesos debe aportar datos cuantitativos sobre los rasgos mineralógicos influyentes en el comportamiento de los minerales y para ello se apoya en el uso de sistemas de análisis mineralógico automatizado. Estos sistemas son capaces de proporcionar gran cantidad de datos mineralógicos de manera rápida y precisa. Sin embargo, cuando se trata de la caracterización de la textura, el mineralogista debe recurrir a descripciones cualitativas basadas en la observación, ya que los sistemas actuales no ofrecen información textural automatizada. Esta tesis doctoral surge precisamente para proporcionar de manera sistemática información textural relevante para los procesos de concentración mineral. La tesis tiene como objetivo principal la identificación y caracterización del tipo de intercrecimiento que un determinado mineral presenta en las partículas minerales, e inicialmente se han tenido en cuenta los siete tipos de intercrecimiento considerados como los más relevantes bajo el punto de vista del comportamiento de las partículas minerales durante flotación, lixiviación y molienda. Para alcanzar este objetivo se ha desarrollado una metodología basada en el diseño y cálculo de una serie de índices numéricos, a los que se ha llamado índices mineralúrgicos, que cumplen una doble función: por un lado, cada índice aporta información relevante para caracterizar los principales rasgos mineralógicos que gobiernan el comportamiento de las partículas minerales a lo largo de los procesos de concentración y por otro lado, estos índices sirven como variables discriminantes para identificar el tipo de intercrecimiento mineral mediante la aplicación de Análisis Discriminante. Dentro del conjunto de índices propuestos en este trabajo, se han considerado algunos índices propuestos por otros autores para su aplicación tanto en el ámbito de la mineralogía como en otros ámbitos de la ciencia de materiales. Se trata del Índice de Contigüidad (Gurland, 1958), Índice de Intercrecimiento (Amstutz y Giger, 1972) e Índice de Coordinación (Jeulin, 1981), adaptados en este caso para el análisis de partículas minerales. El diseño de los índices se ha basado en los principios básicos de la Estereología y el análisis digital de imagen, y su cálculo se ha llevado a cabo aplicando el método de interceptos lineales mediante la programación en MATLAB de varias rutinas. Este método estereológico permite recoger una serie de medidas a partir de las que es posible calcular varios parámetros, tanto estereológicos como geométricos, que han servido de base para calcular los índices mineralúrgicos. Para evaluar la capacidad discriminatoria de los índices mineralúrgicos se han seleccionado 200 casos en los que se puede reconocer de manera clara alguno de los siete tipos de intercrecimiento considerados inicialmente en este trabajo. Para cada uno de estos casos se han calculado los índices mineralúrgicos y se ha aplicado Análisis Discriminante, obteniendo un porcentaje de acierto en la clasificación del 95%. Esta cifra indica que los índices propuestos son discriminadores fiables del tipo de intercrecimiento. Una vez probada la capacidad discriminatoria de los índices, la metodología desarrollada ha sido aplicada para caracterizar una muestra de un concentrado de cobre procedente de la mina Kansanshi (Zambia). Esta caracterización se ha llevado a cabo para obtener la distribución de calcopirita según su tipo de intercrecimiento. La utilidad de esta distribución ha sido analizada bajo diferentes puntos de vista y en todos ellos los índices mineralúrgicos aportan información valiosa para caracterizar el comportamiento mineralúrgico de las partículas minerales. Los resultados derivados tanto del Análisis Discriminante como de la caracterización del concentrado de Kansanshi muestran la fiabilidad, utilidad y versatilidad de la metodología desarrollada, por lo que su integración como herramienta rutinaria en los sistemas actuales de análisis mineralógico pondría a disposición del mineralurgista gran cantidad de información textural complementaria a la información ofrecida por las técnicas actuales de caracterización mineralógica. ABSTRACT Process mineralogy has become in the last decades an essential tool in the mining and metallurgical sphere, especially driven by the emergence of Geometallurgy. This emergent discipline provides required information to efficiently tailor the circuit performance to the mineralogical variability inherent to ore deposits. To contribute to the Geometallurgical model, process mineralogy must provide quantitative data about the main mineralogical features implied in the minerallurgical behaviour of minerals. To address this characterisation, process mineralogy relies on automated systems. These systems are capable of providing a large amount of data quickly and accurately. However, when it comes to the characterisation of texture, mineralogists need to turn to qualitative descriptions based on observation, due to the fact that current systems can not offer quantitative textural information in a routine way. Aiming at the automated characterisation of textural information, this doctoral thesis arises to provide textural information relevant for concentration processes in a systematic way. The main objective of the thesis is the automated identification and characterisation of intergrowth types in mineral particles. Initially, the seven intergrowth types most relevant for flotation, leaching and grinding are considered. To achieve this goal, a methodology has been developed based on the computation of a set of numerical indices, which have been called minerallurgical indices. These indices have been designed with two main purposes: on the one hand, each index provides information to characterise the main mineralogical features which determine particle behaviour during concentration processes and, on the other hand, these indices are used as discriminant variables for identifying the intergrowth type by Discriminant Analysis. Along with the indices developed in this work, three indices proposed by other authors belonging to different fields of materials science have been also considered after being adapted to the analysis of mineral particles. These indices are Contiguity Index (Gurland, 1958), Intergrowth Index (Amstutz and Giger, 1972) and Coordination Index (Jeulin, 1981). The design of minerallurgical indices is based on the fundamental principles of Stereology and Digital Image Analysis. Their computation has been carried out using the linear intercepts method, implemented by means of MATLAB programming. This stereological method provides a set of measurements to obtain several parameters, both stereological and geometric. Based on these parameters, minerallurgical indices have been computed. For the assessment of the discriminant capacity of the developed indices, 200 cases have been selected according to their internal structure, so that one of the seven intergrowth types initially considered in this work can be easily recognised in any of their constituents. Minerallurgical indices have been computed for each case and used as discriminant variables. After applying discriminant analysis, 95% of the cases were correctly classified. This result shows that the proposed indices are reliable identifiers of intergrowth type. Once the discriminant power of the indices has been assessed, the developed methodology has been applied to characterise a copper concentrate sample from the Kansanshi copper mine (Zambia). This characterisation has been carried out to quantify the distribution of chalcopyrite with respect to intergrowth types. Different examples of the application of this distribution have been given to test the usefulness of the method. In all of them, the proposed indices provide valuable information to characterise the minerallurgical behaviour of mineral particles. Results derived from both Discriminant Analysis and the characterisation of the Kansanshi concentrate show the reliability, usefulness and versatility of the developed methodology. Therefore, its integration as a routine tool in current systems of automated mineralogical analysis should make available for minerallurgists a great deal of complementary information to treat the ore more efficiently.

Caracterização tecnológica de minérios auríferos por análise automatizada de imagens obtidas por microscopia eletrônica de varredura.

O ouro, assim como outros bens minerais, é uma commodity, ou seja, um produto não diferenciado, com preço determinado pelo mercado internacional, sem a interferência de seus produtores. Diante desse cenário, associado à exaustão dos depósitos minerais de maiores teores, as mineradoras vêm buscando melhores formas de aproveitamento de matérias-primas minerais mais complexas quanto à extração e ao beneficiamento. Os retornos financeiros são obtidos no estrito controle da produção com redução de custos e mitigação de perdas nas operações unitárias. A caracterização tecnológica está inserida como uma abordagem multidisciplinar e fundamental para o melhor aproveitamento dos bens minerais. Possibilita um maior conhecimento do minério e das associações minerais presentes, que auxiliará no desenvolvimento das alternativas de explotação e na otimização do processo em funcionamento. Dentre os procedimentos de caracterização das associações minerais mais acurados citam-se os sistemas automatizados de análise de imagens adquiridas por microscopia eletrônica de varredura. Permitem a avaliação qualitativa ou quantitativa de grande número de partículas quanto à composição química e mineral, partição de elementos nos minerais presentes, formas de associações e liberação entre os minerais. Este estudo se concentra na caracterização de quatro amostras mineralizadas a ouro, de diferentes regiões do Brasil, pela análise automatizada de imagens e por métodos laboratoriais de separações minerais e extração hidrometalúrgica do ouro. A combinação de procedimentos laboratoriais com a análise de imagens permitiu confrontar os resultados das recuperações potenciais, fornecendo subsídios para abordagens de processo, para obtenção da máxima recuperação do ouro e para diagnosticar as características interferentes nesses processos.

Avaliação da soldagem GMAW mecanizada e automatizada para união de dutos utilizando fontes convencional e com controle de curto- circuito

Welding is one of the most employed process for joining steel pipes. Although, manual welding is still the most used one, mechanized version and even automatized one have increased its demand. Thus, this work deals with girth welding of API 5L X65 pipes with 8” of nominal diameter and 8.0 mm thickness, beveled with V-30º narrow gap. Torch is moved by a bug carrier (mechanized welding) and further the parameters are controlled as a function of angular position (automatized welding). Welding parameters are presented for filling the joint with two-passes (root and filling/capping passes). Parameters for the root pass were extracted from previous author´s work with weldments carried out in plates, but validated in this work for pipe welding. GMAW processes were assessed with short-circuit metal transfer in both conventional and derivative modes using different technologies (RMD, STT and CMT). After the parameter determination, mechanical testing was performed for welding qualification (uniaxial tension, face and root bending, nick break, Charpy V-notch impact, microhardness and macrograph). The initially obtained results for RMD and CMT were acceptable for all testing and, in a second moment, also for the STT. However, weld beads carried out by using the conventional process failed and revealed the existence of lack of fusion, which required further parametrization. Thus, a Parameter-Variation System for Girth Welding (SVP) was designed and built to allow varying the welding parameters as a function of angular position by using an inclinometer. The parameters were set for each of the three angular positions (flat, vertical downhill and overhead). By using such equipment and approach, the conventional process with parameter variation allowed reducing the welding time for joint accomplishment of the order of 38% for the root pass and 30% for the filling/capping pass.

Documentação automatizada de APIs com tutoriais gerados a partir do Stack Overflow

One of the most common forms of reuse is through API usage. However, one of the main challenges to effective usage is an accessible and easy to understand documentation. Several papers have proposed alternatives to make more understandable API documentation, or even more detailed. However, these studies have not taken into account the complexity of understanding of the examples to make these documentations adaptable to different levels of experience of developers. In this work we developed and evaluated four different methodologies to generate tutorials for APIs from the contents of Stack Overflow and organizing them according to the complexity of understanding. The methodologies were evaluated through tutorials generated for the Swing API. A survey was conducted to evaluate eight different features of the generated tutorials. The overall outcome of the tutorials was positive on several characteristics, showing the feasibility of the use of tutorials generated automatically. In addition, the use of criteria for presentation of tutorial elements in order of complexity, the separation of the tutorial in basic and advanced parts, the nature of tutorial to the selected posts and existence of didactic source had significantly different results regarding a chosen generation methodology. A second study compared the official documentation of the Android API and tutorial generated by the best methodology of the previous study. A controlled experiment was conducted with students who had a first contact with the Android development. In the experiment these students developed two tasks, one using the official documentation of Android and using the generated tutorial. The results of this experiment showed that in most cases, the students had the best performance in tasks when they used the tutorial proposed in this work. The main reasons for the poor performance of students in tasks using the official API documentation were due to lack of usage examples, as well as its difficult use.

Detección automatizada de desfiguraciones en un sitio web mediante una solución basada en Software Libre

La desfiguración de sitios web es uno de los ataques más populares hoy en día y se basan en realizar un cambio en el código HTML de una página web, que se presenta como un cambio visual en la imagen del mismo. En el presente trabajo se propone desarrollar un sistema mediante el cual se puedan detectar y/o reportar dichos cambios de una forma temprana y automatizada. El Software Libre (SL) ofrece la posibilidad de crear soluciones y es el marco sobre el cual se propone una solución.

Ação e reação: a catalogação de uma nova técnica de mãos, suas vertentes e possibilidades

O estudo aqui apresentado não detém caráter exaustivo pelo fato de que novos dados poderão surgir daqui para frente, principalmente por se tratar de uma espécie de “feeling” relacionado à execução das semicolcheias do samba, que pode ser interpretado de maneiras diferentes. Trata-se de uma pesquisa empírica que se fundamentou em entrevistas juntamente do profissional responsável pela criação de Ação e Reação: o músico Brasileiro Kiko Freitas, nas suas experiências e conhecimento pessoal. Em decorrência das falas buscou-se apoio em Bardin e sua Análise de Conteúdo, base científica para a falta de bibliografia sobre o assunto específico, também manuais e métodos sobre técnicas de baquetas existentes, além da consulta em vídeo-aulas e sites online. A trajetória perseguida buscou encontrar a interface entre as respostas do entrevistado e os pressupostos teóricos de Bardin, naquilo que tem relação ao assunto-foco do estudo: Uma nova técnica de mãos com estilo, economia de movimentos e que seja uma alternativa para a execução do samba na bateria.

Uso de redes neurais artificiais na identificação de vocalização de suínos

Animal welfare has been an important research topic in animal production mainly in its ways of assessment. Vocalization is found to be an interesting tool for evaluating welfare as it provides data in a non-invasive way as well as it allows easy automation of process. The present research had as objective the implementation of an algorithm based on artificial neural network that had the potential of identifying vocalization related to welfare pattern indicatives. The research was done in two parts, the first was the development of the algorithm, and the second its validation with data from the field. Previous records allowed the development of the algorithm from behaviors observed in sows housed in farrowing cages. Matlab® software was used for implementing the network. It was selected a retropropagation gradient algorithm for training the network with the following stop criteria: maximum of 5,000 interactions or error quadratic addition smaller than 0.1. Validation was done with sows and piglets housed in commercial farm. Among the usual behaviors the ones that deserved enhancement were: the feed dispute at farrowing and the eventual risk of involuntary aggression between the piglets or between those and the sow. The algorithm was able to identify through the noise intensity the inherent risk situation of piglets welfare reduction.

Sensitivity and specificity of machine learning classifiers for glaucoma diagnosis using Spectral Domain OCT and standard automated perimetry

PURPOSE: To evaluate the sensitivity and specificity of machine learning classifiers (MLCs) for glaucoma diagnosis using Spectral Domain OCT (SD-OCT) and standard automated perimetry (SAP). METHODS: Observational cross-sectional study. Sixty two glaucoma patients and 48 healthy individuals were included. All patients underwent a complete ophthalmologic examination, achromatic standard automated perimetry (SAP) and retinal nerve fiber layer (RNFL) imaging with SD-OCT (Cirrus HD-OCT; Carl Zeiss Meditec Inc., Dublin, California). Receiver operating characteristic (ROC) curves were obtained for all SD-OCT parameters and global indices of SAP. Subsequently, the following MLCs were tested using parameters from the SD-OCT and SAP: Bagging (BAG), Naive-Bayes (NB), Multilayer Perceptron (MLP), Radial Basis Function (RBF), Random Forest (RAN), Ensemble Selection (ENS), Classification Tree (CTREE), Ada Boost M1(ADA),Support Vector Machine Linear (SVML) and Support Vector Machine Gaussian (SVMG). Areas under the receiver operating characteristic curves (aROC) obtained for isolated SAP and OCT parameters were compared with MLCs using OCT+SAP data. RESULTS: Combining OCT and SAP data, MLCs' aROCs varied from 0.777(CTREE) to 0.946 (RAN).The best OCT+SAP aROC obtained with RAN (0.946) was significantly larger the best single OCT parameter (p<0.05), but was not significantly different from the aROC obtained with the best single SAP parameter (p=0.19). CONCLUSION: Machine learning classifiers trained on OCT and SAP data can successfully discriminate between healthy and glaucomatous eyes. The combination of OCT and SAP measurements improved the diagnostic accuracy compared with OCT data alone.