Commercial reviews in the tender process of contractors

Purpose – The purpose of this paper is to show the extent to which clients amend standard form contracts in practice, the locus of the amendments, and how contractors respond to the amendments when putting together a bid. Design/methodology/approach – Four live observational case studies were carried out in two of the top 20 UK construction firms. The whole process used to review the proposed terms and conditions of the contract was shadowed using participant observation, interview and documentary analysis. Findings – All four cases showed strong evidence of amendments relating mostly to payment and contractual aspects: 83 amendments in Case Study 1 (CS1), 80 in CS2, 15 in CS3 and 29 in CS4. This comprised clauses that were modified (37 per cent), substituted (23 per cent), deleted (7 per cent) and new additions (33 per cent). Risks inherent in the amendments were mostly addressed through contractual rather than price mechanisms, to reflect commercial imperatives. “Qualifications” and “clarifications” were included in the tender submissions for post-tender negotiations. Thus, the amendments did not necessarily influence price. There was no evidence of a “standard-form contract“ being used as such, although clients may draw on published “standard-form contracts” to derive the forms of contract actually used in practice. Practical implications – Contractors should pay attention to clauses relating to contractual and financial aspects when reviewing tender documents. Clients should draft equitable payment and contractual terms and conditions to reduce risk of dispute. Indeed, it is prudent for clients not to pass on inestimable risks. Originality/value – A better understanding of the extent and locus of amendments in standard form contracts, and how contractors respond, is provided.

Synthesis, X-ray crystal structures and properties of complex salts and sterically crowded heteroleptic complexes of group 10 metal ions with aromatic sulfonyl dithiocarbimates and triphenylphosphine ligand

Two new complex salts of the form (Bu4N)(2)[Ni(L)(2)] (1) and (Ph4P)(2)[Ni(L)(2)] (2) and four heteroleptic complexes cis-M(PPh3)(2)(L) [M = Ni(II) (3), Pd(II) (4), L = 4-CH3OC6H4SO2N=CS2] and cis-M(PPh3)(2)(L') [M = Pd(II) (5), Pt(II) (6), L' = C6H5SO2N=CS2] were prepared and characterized by elemental analyses, IR, H-1, C-13 and P-31 NMR and UV-Vis spectra, solution and solid phase conductivity measurements and X-ray crystallography. A minor product trans-Pd(PPh3)(2)(SH)(2), 4a was also obtained with the synthesis of 4. The NiS4 and MP2S2 core in the complex salts and heteroleptic complexes are in the distorted square-plane whereas in the trans complex, 4a the centrosymmetric PdS2P2 core is perforce square planar. X-ray crystallography revealed the proximity of the ortho phenyl proton of the PPh3 ligand to Pd(II) showing rare intramolecular C-H center dot center dot center dot Pd anagostic binding interactions in the palladium cis-5 and trans-4a complexes. The complex salts with sigma(rt) values similar to 10 (5) S cm (1) show semi-conductor behaviors. The palladium and platinum complexes show photoluminescence properties in solution at room temperature.

Hidrogenação catalítica de olefinas e dienos a partir de complexos catiônicos de ródio no sistema de fases formado por N-heptano/PEO 3350 + metanol

Este trabalho descreve a utilização do sistema n-heptano / PEO 3350 + metanol na hidrogenação catalítica de olefinas e dienos por complexos de ródio. Nos primeiros estudos na hidrogenação do 1-hexeno sob fluxo, temperatura ambiente e com o complexo [(η5-Cp*)2Rh2(μ2- Cl)3]PF6, observaram-se problemas difusionais de hidrogênio no meio reacional, os quais foram resolvidos com modificações na geometria do reator e difusor de hidrogênio. Sob condição de fluxo otimizada e temperatura ambiente, observou-se um efeito na reatividade das olefinas relacionado ao tamanho da cadeia carbônica, na seguinte ordem: 1-hexeno > 1-octeno >> 1- deceno, o qual pode ser expresso, tomando a reatividade do 1-hexeno como padrão, como (1:0,3:0,03). Todas as reações (23 corridas) foram realizadas utilizando a mesma fase catalítica polar (PEO 3350 + MeOH + complexo de ródio), mostrando que o sistema é muito efetivo para catálise homogênea. Por outro lado, os dienos não foram hidrogenados sob condição de fluxo, requerendo altas pressões de hidrogênio (> 20 bar), tipicamente 40 bar. Sob as condições otimizadas (40 bar de H2 e temperatura ambiente), foi obtida uma FR da ordem de 5000 h-1. Durante os estudos da hidrogenação dos dienos, foi observado um aumento na atividade catalítica ao longo das reciclagens. Também foi verificado que a atividade catalítica aumentava quando a cor da solução passava de laranja para marrom, bege e incolor. Com o objetivo de isolar algum complexo de ródio de alguma dessas etapas (cores), foram realizados experimentos sob condições típicas de pressão de H2 (40 bar) e tempo (2 horas) sem substrato, com e sem PEO. Em ambos os casos, após 7 reciclagens a cor final da solução foi marrom. Assim, o substrato parece ser essencial para a coloração final da solução reacional, a qual é a forma mais ativa do catalisador. Nos experimentos realizados sem PEO foi possível isolar o complexo catiônico de ródio [(η5- Cp*)Rh(MeOH)3](PF6)2, o qual foi caracterizado por IV, 1H-RMN, C, H, N e UV / vis. Esse complexo também foi formado na presença de PEO. (Continua). Considerando os altos valores de FR, alguns testes cinéticos (perfil de consumo de substrato, envenenamento por CS2 e reatividade frente ao benzeno), espalhamento de luz e microscopia eletrônica de transmissão foram realizados a fim de elucidar a natureza física do catalisador como molecular ou coloidal. Todos os testes evidenciaram um processo catalítico molecular.

Espectroscopia resolvida no tempo : caracterização de pulsos curtos, dinâmica molecular em líquidos, modelamento de luz incoerente

Nesta tese realizamos três trabalhos que envolvem diferentes aspectos da espectroscopia resolvida no tempo. No primeiro discutimos brevemente a teoria e as principais técnicas para a caracterização de pulsos curtos. Analisamos detalhamente uma destas técnicas e propusemos modi cações que possibilitaram o barateamento dos custos da montagem e, além disso, introduziram novas características que sanaram alguns problemas que a montagem original apresentava e que também possibilitaram uma melhor caracterização da própria técnica. Descrevemos cuidadosamente as condições que devem ser satisfeitas pela geometria dos feixes e pelos componentes da montagem para obter uma caracterização correta dos pulsos curtos. Também apresentamos o procedimento de calibração do sistema. Pulsos com diferentes tempos e funções de fase foram caracterizados e os resultados foram validados por testes de con abilidade da informação recuperada. O trabalho seguinte foi o estudo da dinâmica molecular em líquidos puros e em misturas através da técnica efeito Kerr óptico resolvido no tempo, que é uma técnica do tipo bombeio e prova não ressonante, usando um sistema laser Ti:Sa ra com pulsos de 170 fs, centrados em 800 nm. As moléculas estudadas foram o dissulfeto de carbono (CS2), benzeno (C6H6), alilbenzeno (C9H10) e o poliestireno (PS). A teoria necessária para descrever os resultados medidos foi desenvolvida no regime temporal. O modelo de Debye para a relaxação difusiva da anisotropia orientacional descreve a componente de tempos longa, acima de um picosegundo. Partindo do Hamiltoniano de interação, desenvolvemos a teoria da função resposta linear, chegando a uma expressão para a relaxação da polarizabilidade anisotrópica, necessária para descrever os tempos curtos (subpicosegundos). Além disso, a passagem para o regime espectral utilizando somente dados experimentais, ou seja, sem a necessidade de levar em conta modelos especí cos, também foi discutida. Os resultados mostram que os tempos difusivos tanto nos líquidos puros quanto nas misturas seguem a equação de Debye-Stokes-Einstein que prevê um aumento deste tempo para viscosidades maiores. Os tempos curtos são analisados em termos da componente não difusiva da resposta espectral associada à dinâmica molecular. As alterações do espectro foram quanti cadas e a explicação para as mudanças observadas foi dada em termos das con gurações estruturais de interação que levam a uma alteração do potencial intermolecular dentro do qual as moléculas executam movimentos libracionais. Por último, investigamos a questão do modelamento de pulsos de luz incoerente. Para isto trabalhamos com um laser de corante banda larga sem elemento de seleção espectral intracavidade. A técnica utilizada foi o espalhamento forçado de luz ao qual foi acoplado um modelador composto por uma grade, uma lente e uma máscara que alterava a função de fase espectral relativa entre os feixes formadores da grade transiente na amostra de interesse. Realizamos uma análise detalhada desta montagem e obtivemos expressões para ajustar os dados medidos. Os resultados mostram que a função de correlação pode ser alterada de forma especí ca através da escolha de determinadas funções de fase espectrais.

Avaliação de Percepção de periodontistas, protesistas, ortodontistas e leigos sobre parâmetros periodontais relacionados à estética do sorriso

The concept of facial esthetics has been increasingly diffused, being of interest to both the general public and the surgeon-dentists. However the difficult standardization and high variability in parameters aesthetic existing in the literature result in a huge difference of opinions between professionals and layperson. In this way, objective of this research was to evaluate the perception of periodontistas, protesistas, orthodontists and layperson about aesthetics smile. The sample included 30 periodontistas, 30 protesistas, 31 orthodontists and 37 layperson. The data collection was performed through an interview indirect, by the site, which had fifteen photos to be assessed by the participants. Each photograph was intentionally modified, with four increments 1mm for each amendment, in the program Adobe Photoshop CS2 version 9.0, adding-four aesthetic alterations: exposure gingival, recession gingival, absence of papilla and contour gingival. The smile for periodontistas, 3mm for orthodontists and laity and 4mm for protesistas. And changes in recession gingival, have undertaken the aesthetics of smiling from 2mm in accordance with the periodontistas and protesistas and 4mm for orthodontists and lay people. The end of the research was possible to conclude that the perception of periodontistas, protesistas, orthodontists and layperson are different in relation to aesthetics smile, and that among the changes in the research evaluated the papilla and recession have undertaken the aesthetics of smile

Limiar anaeróbio e velocidade crítica determinada com diferentes distâncias em nadadores de 10 a 15 anos: relações com a performance e a resposta do lactato sanguíneo em testes de endurance

O objetivo deste estudo foi comparar a velocidade crítica (VC) determinada através de diferentes distâncias com o limiar anaeróbio (LAn) e as velocidades máximas mantidas em testes de 20 (V20) e 30 (V30) minutos na natação, verificando se a idade cronológica em jovens nadadores interfere nessas relações. Participaram do estudo 31 nadadores (17 meninas e 14 meninos) divididos segundo a idade cronológica em dois grupos: 10 a 12 anos e 13 a 15 anos. O LAn foi determinado como sendo a velocidade correspondente a 4mM de lactato sanguíneo. A VC1 (25/50/100m), VC2 (100/200/400m) e a VC3 (50/100/200m) foram calculadas através do coeficiente angular da reta de regressão linear entre as distâncias e seus respectivos tempos. As V20 e V30 foram determinadas através de três a seis repetições, com coletas de sangue no 10º minuto e ao final do tiro. Para o grupo de 10 a 12 anos, a VC1 (m/s) (0,98 ± 0,17) e o LAn (0,97 ± 0,12) não foram diferentes entre si, sendo maiores do que a VC2 (0,92 ± 0,16), VC3 (0,89 ± 0,18), V20 (0,92 ± 0,11) e V30 (0,90 ± 0,11). Para o grupo de 13 a 15 anos, a VC1 (m/s)(1,11 ± 0,11) foi maior do que o LAn (1,02 ± 0,07), V20 (0,99 ± 0,09), V30 (0,97 ± 0,09), VC2 (0,98 ± 0,11) e VC3 (1,00 ± 0,11). Pode-se concluir que a distância utilizada na determinação da VC interfere no valor obtido, independente da idade cronológica. A VC determinada com distâncias entre 50 e 400m pode ser utilizada na avaliação da capacidade aeróbia de crianças e adolescentes, substituindo os testes contínuos máximos com durações próximas a 20 ou 30 minutos.

Investigação por espectroscopia Mössbauer de compostos de ferro(0) contendo dissulfeto de carbono

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison between protocols for the determination of anaerobic threshold in adolescent swimmers

Aim. The purpose of this study was to compare the anaerobic threshold speed (AT) obtained from fixed lactate blood concentrations (AT 4 mM and AT 3.5 mM), lactate minimum speed (LM) and critical speed (CS), determined from different distances in fifteen Brazilian national level swimmers (10 boys = 14.8 ± 0.6 years old and 5 girls = 14.6 ±0.8 year-old). Methods. The tests to determine the AT 4 mM, AT 3.5 mM, LM and CS were performed in a 25 m swimming pool and consisted of 7 or 8 evaluations separated by 24-48 h intervals. Data were submitted to analysis of variance (ANOVA) for repeated measures, followed by the post hoc Scheffé test and Pearson correlation coefficients. Significance was set at P<0.01. Results. There were no significant differences among the values for AT 4 mM and CS1 (1.34 ± 0.05 vs. 1.33 ± 0.05 m.s -1, respectively). However, AT 4 mM and CS1 were significantly higher than AT 3.5 mM (1.28 ± 0.04 m.s -1), LM (1.27 ± 0.05 m.s -1), CS2 (1.26 ± 0.06 m.s -1), CS3 (1.27 ± 0.06 m.s -1) and CS4 (1.25 ± 0.07 m.s -1). There were no significant differences among the values for AT 3.5 mM, LM, CS2, CS3 and CS4. Conclusion. The results obtained in this study suggest that the anaerobic threshold determined by a fixed lactate concentration of 3.5 mM, as well as the LM and the CS methods determined by different distances, seem to be the most appropriate indexes for the evaluation of aerobic capacity in adolescent swimmers.

Effective range from tetramer-dissociation data for cesium atoms

The shifts in the four-body recombination peaks, due to an effective range correction to the zero-range model close to the unitary limit, are obtained and used to extract the corresponding effective range of a given atomic system. The approach is applied to an ultracold gas of cesium atoms close to broad Feshbach resonances, where deviations of experimental values from universal model predictions are associated with effective range corrections. The effective range correction is extracted with a weighted average given by 3.9±0.8R vdW, where RvdW is the van der Waals length scale, which is consistent with the van der Waals potential tail for the Cs2 system. The method can be generally applied to other cold atom experimental setups to determine the contribution of the effective range to the tetramer dissociation position. © 2013 American Physical Society.

Adesão de um cimento resinoso a uma cerâmica feldspática: avaliação da resistência adesiva, ângulo de contato e ph, em função de diferentes técnicas de condicionamento

Pós-graduação em Odontologia Restauradora - ICT

Caracterização molecular e relação filogenética do genoma completo dos arbovírus Bussuquara, Iguape, Ilhéus e Rocio (Família Flaviviridae, Gênero Flavivirus)

Os flavivírus são conhecidos por seu complexo ciclo biológico e importância na saúde pública e na economia mundial. Os aspectos ecológicos e quadros clínicos estão estreitamente relacionados à filogenia e evolução dos flavivírus. Este trabalho objetiva a caracterização molecular dos genomas dos flavivírus Bussuquara (VBSQ), Iguape (VIGU), Ilhéus (VILH) e Rocio (VROC), determinando relações filogenéticas com os demais integrantes do gênero Flavivirus. Foi realizado o seqüenciamento completo da região codificadora (ORF) e regiões não codificantes (RNC) 5’ e 3’; análise da estrutura secundária do RNA viral e das sequências conservadas da 3’RNC; determinação dos sítios de clivagem, glicosilação, resíduos Cis e motivos conservados na poliproteína; e as análises de similaridade e filogenética. Os genomas dos VBSQ, VIGU, VILH e VROC apresentaram a mesma organização que os demais flavivírus, medindo 10.815 nt, 10.922 nt, 10.775 nt, 10.794 nt, respectivamente. O padrão das sequências conservadas da 3’RNC do VBSQ foi RCS2-CS2-CS1, enquanto que para os VIGU, VILH e VROC foram CS3-RCS2-CS2-CS1. As características das estruturas secundárias do RNAs dos flavivírus em estudo foram similares aos demais flavivírus. O número dos sítios de glicosilação das proteínas PrM, E e NS1 foi distinto entre os flavivírus brasileiros, porém o padrão 6,12,12 dos resíduos de Cis e do sítios de clivagem permaneceram conservados. Na proteína E, alterações aminoacídicas pontuais foram observadas no peptídeo de fusão dos VBSQ, VIGU e VROC, e a sequência do tripepídeo RGD foi distinta para os quatro vírus em estudo. Os motivos determinantes das atividades de MTase-SAM da NS5, bem como da helicase e protease da NS3, permanecem conservados. Dentre os oito motivos da polimerase viral (NS5), somente os motivos V, VI e VII possuem alguma substituição nucleotídica para o VILH e VROC. As análises de similaridade mostram que VBSQ apresenta maior relação com VIGU enquanto que o VILH e VROC são mais relacionados entre si, porém sendo consideradas espécies virais distintas. Com base nas análises filogenéticas, características moleculares do genoma e biológicas, propõem-se a formação de três grupos genéticos: o grupo Rocio, que agrupa VROC e VILH; o grupo Bussuquara formado pelos VBSQ e Vírus naranjal e o grupo Aroa que inclui o Vírus Aroa e VIGU.

In vitro study on radiographic gray levels of biomaterials using two digital image methods

PURPOSE: To compare the direct and indirect radiographic methods for assessing the gray levels of biomaterials employing the Digora for Windows and the Adobe Photoshop CS2 systems. METHODS: Specimens of biomaterials were made following manusfacturer's instructions and placed on phosphor storage plates (PSP) and on radiographic film for subsequent gray level assessment using the direct and indirect radiographic method, respectively. The radiographic density of each biomaterial was analyzed using Adobe Photoshop CS2 and Digora for Windows software. RESULTS: The distribution of gray levels found using the direct and indirect methods suggests that higher exposure times are correlated to lower reproducibility rates between groups. CONCLUSION: The indirect method is a feasible alternative to the direct method in assessing the radiographic gray levels of biomaterials, insofar as significant reproducibility was observed between groups for the exposure times of 0.2 to 0.5 seconds.

AN EXPERIMENTAL STUDY OF PARTIAL LOW RISK DEPLOYMENT IN A FIXED VEHICLE ENVIRONMENT

This study will look at the passenger air bag (PAB) performance in a fix vehicle environment using Partial Low Risk Deployment (PLRD) as a strategy. This development will follow test methods against actual baseline vehicle data and Federal Motor Vehicle Safety Standards 208 (FMVSS 208). FMVSS 208 states that PAB compliance in vehicle crash testing can be met using one of three deployment methods. The primary method suppresses PAB deployment, with the use of a seat weight sensor or occupant classification sensor (OCS), for three-year old and six-year old occupants including the presence of a child seat. A second method, PLRD allows deployment on all size occupants suppressing only for the presents of a child seat. A third method is Low Risk Deployment (LRD) which allows PAB deployment in all conditions, all statures including any/all child seats. This study outlines a PLRD development solution for achieving FMVSS 208 performance. The results of this study should provide an option for system implementation including opportunities for system efficiency and other considerations. The objective is to achieve performance levels similar too or incrementally better than the baseline vehicles National Crash Assessment Program (NCAP) Star rating. In addition, to define systemic flexibility where restraint features can be added or removed while improving occupant performance consistency to the baseline. A certified vehicles’ air bag system will typically remain in production until the vehicle platform is redesigned. The strategy to enable the PLRD hypothesis will be to first match the baseline out of position occupant performance (OOP) for the three and six-year old requirements. Second, improve the 35mph belted 5th percentile female NCAP star rating over the baseline vehicle. Third establish an equivalent FMVSS 208 certification for the 25mph unbelted 50th percentile male. FMVSS 208 high-speed requirement defines the federal minimum crash performance required for meeting frontal vehicle crash-test compliance. The intent of NCAP 5-Star rating is to provide the consumer with information about crash protection, beyond what is required by federal law. In this study, two vehicles segments were used for testing to compare and contrast to their baseline vehicles performance. Case Study 1 (CS1) used a cross over vehicle platform and Case Study 2 (CS2) used a small vehicle segment platform as their baselines. In each case study, the restraints systems were from different restraint supplier manufactures and each case contained that suppliers approach to PLRD. CS1 incorporated a downsized twins shaped bag, a carryover inflator, standard vents, and a strategic positioned bag diffuser to help disperse the flow of gas to improve OOP. The twin shaped bag with two segregated sections (lobes) to enabled high-speed baseline performance correlation on the HYGE Sled. CS2 used an A-Symmetric (square shape) PAB with standard size vents, including a passive vent, to obtain OOP similar to the baseline. The A-Symmetric shape bag also helped to enabled high-speed baseline performance improvements in HYGE Sled testing in CS2. The anticipated CS1 baseline vehicle-pulse-index (VPI) target was in the range of 65-67. However, actual dynamic vehicle (barrier) testing was overshadowed with the highest crash pulse from the previous tested vehicles with a VPI of 71. The result from the 35mph NCAP Barrier test was a solid 4-Star (4.7 Star) respectfully. In CS2, the vehicle HYGE Sled development VPI range, from the baseline was 61-62 respectively. Actual NCAP test produced a chest deflection result of 26mm versus the anticipated baseline target of 12mm. The initial assessment of this condition was thought to be due to the vehicles significant VPI increase to 67. A subsequent root cause investigation confirmed a data integrity issue due to the instrumentation. In an effort to establish a true vehicle test data point a second NCAP test was performed but faced similar instrumentation issues. As a result, the chest deflect hit the target of 12.1mm; however a femur load spike, similar to the baseline, now skewed the results. With noted level of performance improvement in chest deflection, the NCAP star was assessed as directional for 5-Star capable performance. With an actual rating of 3-Star due to instrumentation, using data extrapolation raised the ratings to 5-Star. In both cases, no structural changes were made to the surrogate vehicle and the results in each case matched their perspective baseline vehicle platforms. These results proved the PLRD is viable for further development and production implementation.

In vitro precision of fit of computer-aided designed and computer-aided manufactured titanium screw-retained fixed dental prostheses before and after ceramic veneering

OBJECTIVE To compare the precision of fit of full-arch implant-supported screw-retained computer-aided designed and computer-aided manufactured (CAD/CAM) titanium-fixed dental prostheses (FDP) before and after veneering. The null-hypothesis was that there is no difference in vertical microgap values between pure titanium frameworks and FDPs after porcelain firing. MATERIALS AND METHODS Five CAD/CAM titanium grade IV frameworks for a screw-retained 10-unit implant-supported reconstruction on six implants (FDI tooth positions 15, 13, 11, 21, 23, 25) were fabricated after digitizing the implant platforms and the cuspid-supporting framework resin pattern with a laser scanner (CARES(®) Scan CS2; Institut Straumann AG, Basel, Switzerland). A bonder, an opaquer, three layers of porcelain, and one layer of glaze were applied (Vita Titankeramik) and fired according to the manufacturer's preheating and fire cycle instructions at 400-800°C. The one-screw test (implant 25 screw-retained) was applied before and after veneering of the FDPs to assess the vertical microgap between implant and framework platform with a scanning electron microscope. The mean microgap was calculated from interproximal and buccal values. Statistical comparison was performed with non-parametric tests. RESULTS All vertical microgaps were clinically acceptable with values <90 μm. No statistically significant pairwise difference (P = 0.98) was observed between the relative effects of vertical microgap of unveneered (median 19 μm; 95% CI 13-35 μm) and veneered FDPs (20 μm; 13-31 μm), providing support for the null-hypothesis. Analysis within the groups showed significantly different values between the five implants of the FDPs before (P = 0.044) and after veneering (P = 0.020), while a monotonous trend of increasing values from implant 23 (closest position to screw-retained implant 25) to 15 (most distant implant) could not be observed (P = 0.169, P = 0.270). CONCLUSIONS Full-arch CAD/CAM titanium screw-retained frameworks have a high accuracy. Porcelain firing procedure had no impact on the precision of fit of the final FDPs. All implant microgap measurements of each FDP showed clinically acceptable vertical misfit values before and after veneering. Thus, the results do not only show accurate performance of the milling and firing but show also a reproducible scanning and designing process.

Regulating a Benzodifuran Single Molecule Redox Switch via Electrochemical Gating and Optimization of Molecule/Electrode Coupling

We report a novel strategy for the regulation of charge transport through single molecule junctions via the combination of external stimuli of electrode potential, internal modulation of molecular structures, and optimization of anchoring groups. We have designed redox-active benzodifuran (BDF) compounds as functional electronic units to fabricate metal–molecule–metal (m–M–m) junction devices by scanning tunneling microscopy (STM) and mechanically controllable break junctions (MCBJ). The conductance of thiol-terminated BDF can be tuned by changing the electrode potentials showing clearly an off/on/off single molecule redox switching effect. To optimize the response, a BDF molecule tailored with carbodithioate (−CS2–) anchoring groups was synthesized. Our studies show that replacement of thiol by carbodithioate not only enhances the junction conductance but also substantially improves the switching effect by enhancing the on/off ratio from 2.5 to 8.