Does hyoid bone resection according to Sistrunk influence normal craniofacial growth? A cephalometric study

PURPOSE: To retrospectively evaluate the influence of hyoid bone resection according to Sistrunk in early age due to a thyroglossal duct cyst on craniofacial growth. MATERIALS AND METHODS: We retrospectively examined 10 patients (2 females and 8 males) having had hyoid bone resection according to Sistrunk due to thyroglossal duct cysts by lateral cephalograms taken before orthodontic treatment (mean, 17.1 years; range, 8.6-31.9 years). Surgery was carried out at a mean age of 4.4 years (range, 0.37-9.8 years). All lateral cephalograms were evaluated and traced by hand. Descriptive statistics were calculated, and data from each patient were compared individually with corresponding standard values (age and gender) from Bathia and Leighton. RESULTS: With regard to sagittal parameters, the SNB angles were by trend too small and the ANB angles were too large. However, the ratio of mandibular to maxillary length showed that the patients had a mandible that was too large or maxilla that was too small. With regard to vertical parameters, large deviations from normal values in both directions (hyperdivergent to hypodivergent pattern) could be detected when we analyzed NSL/ML', NL/ML', and NSL/NL. With regard to dental parameters, the majority of the patients had retroclined upper (IsL/NL, IsL/N-A) and lower (IiL/ML, IiL/N-B) incisors. CONCLUSIONS: Several vertical and horizontal skeletal and dental cephalometric parameters were shown to be different by trend when compared with control values. A possible negative impact on craniofacial growth potential and direction as a result of hyoid resection in early age according to Sistrunk cannot be excluded.

Pre-clinical in vivo models for the screening of bone biomaterials for oral/craniofacial indications: focus on small-animal models.

Preclinical in vivo experimental studies are performed for evaluating proof-of-principle concepts, safety and possible unwanted reactions of candidate bone biomaterials before proceeding to clinical testing. Specifically, models involving small animals have been developed for screening bone biomaterials for their potential to enhance bone formation. No single model can completely recreate the anatomic, physiologic, biomechanic and functional environment of the human mouth and jaws. Relevant aspects regarding physiology, anatomy, dimensions and handling are discussed in this paper to elucidate the advantages and disadvantages of small-animal models. Model selection should be based not on the 'expertise' or capacities of the team, but rather on a scientifically solid rationale, and the animal model selected should reflect the question for which an answer is sought. The rationale for using heterotopic or orthotopic testing sites, and intraosseous, periosseous or extraskeletal defect models, is discussed. The paper also discusses the relevance of critical size defect modeling, with focus on calvarial defects in rodents. In addition, the rabbit sinus model and the capsule model in the rat mandible are presented and discussed in detail. All animal experiments should be designed with care and include sample-size and study-power calculations, thus allowing generation of meaningful data. Moreover, animal experiments are subject to ethical approval by the relevant authority. All procedures and the postoperative handling and care, including postoperative analgesics, should follow best practice.

One-stage (Warsaw) and two-stage (Oslo) repair of unilateral cleft lip and palate: Craniofacial outcomes

The aim of this study was to compare facial development in subjects with complete unilateral cleft lip and palate (CUCLP) treated with two different surgical protocols. Lateral cephalometric radiographs of 61 patients (42 boys, 19 girls; mean age, 10.9 years; SD, 1) treated consecutively in Warsaw with one-stage repair and 61 age-matched and sex-matched patients treated in Oslo with two-stage surgery were selected to evaluate craniofacial morphology. On each radiograph 13 angular and two ratio variables were measured in order to describe hard and soft tissues of the facial region. The analysis showed that differences between the groups were limited to hard tissues – the maxillary prominence in subjects from the Warsaw group was decreased by almost 4° in comparison with the Oslo group (sella-nasion-A-point (SNA) = 75.3° and 79.1°, respectively) and maxillo-mandibular morphology was less favorable in the Warsaw group than the Oslo group (ANB angle = 0.8° and 2.8°, respectively). The soft tissue contour was comparable in both groups. In conclusion, inter-group differences suggest a more favorable outcome in the Oslo group. However, the distinctiveness of facial morphology in background populations (ie, in Poles and Norwegians) could have contributed to the observed results.

The functions of pitx2 and Bmp signaling in craniofacial development

The formation of the vertebrate face is an extremely complex developmental process, which needs to coordinate the outgrowth of several facial primordia. Facial primordia are small buds made up of mesenchymal masses enclosed by an epithelial layer that surrounds the primitive mouth. The upper jaw is formed by the maxillary process, the lateral nasal process, and the frontonasal process while the mandibular process forms the lower jaw. Recent experiments using genetics in mice and bead implantation approaches have shown that the pitx2 homeobox gene and Bmp signaling play important roles in this complex developmental process. However, the molecular mechanisms underlying the function of pitx2 and Bmp in these events are still unclear. Here, we show that pitx2 is required for oral epithelium maintenance, and branchial arch signaling is pitx2 dosage sensitive by using pitx2 allelic combinations that encode varying levels of pitx2. Maintenance of fgf8 signaling requires only low pitx2 dosage while repression of Bmp signaling requires high pitx2 levels. Different incisor and molar phenotypes in low level pitx2 mutant embryos suggest a distinct requirement for pitx2 in tooth-type development. The results show that pitx2 is required for craniofacial muscle formation and expanded Bmp signaling results in excess bone formation in pitx2 mutant embryos. Fate-mapping studies show that ectopic bone results from excessive bone growth, instead of muscle transformation. Moreover, by using cre/loxp system we show that partial loss of Bmpr-IA in the facial primordia results in cleft lip/palate, abnormal teeth, ectopic teeth and tooth transformation. These phenotypes suggest that Bmp signaling has multiple functions during craniofacial development. The mutant palate shelves can fuse with each other when cultured in vitro, suggesting that cleft palate is secondary to the partial loss of Bmpr-IA. Furthermore, we prove that Bmp4, one of the ligands of Bmpr-IA, plays a role during lip fusion developmental process and partial loss of Bmp4 in the facial primordia results in the lip fusion delay. These results have provided insight to understand the complex signaling cascades that regulate craniofacial development. ^

Craniofacial Adaptations After Total Maxillary Osteotomy in Macaca Irus: A Cephalometric and Histologic Study

Submitted in partial fulfillment of the requirements for a Certificate in Orthodontics, Dept. of Orthodontics, University of Connecticut Health Center, 1977

Computerized Three-Dimmensional Craniofacial Reconstruction from Skulls Based on Landmarks.

Human identification from a skull is a critical process in legal and forensic medicine, specially when no other means are available. Traditional clay-based methods attempt to generate the human face, in order to identify the corresponding person. However, these reconstructions lack of objectivity and consistence, since they depend on the practitioner. Current computerized techniques are based on facial models, which introduce undesired facial features when the final reconstruction is built. This paper presents an objective 3D craniofacial reconstruction technique, implemented in a graphic application, without using any facial template. The only information required by the software tool is the 3D image of the target skull and three parameters: age, gender and Body Mass Index (BMI) of the individual. Complexity is minimized, since the application database only consists of the anthropological information provided by soft tissue depth values in a set of points of the skull.

Ethnogenesis and Craniofacial Change in Japan from the Perspective of Nonmetric Traits

To examine population affinities in light of the ‘dual structure model’, frequencies of 21 nonmetric cranial traits were analyzed in 17 prehistoric to recent samples from Japan and five from continental northeast Asia. Eight bivariate plots, each representing a different bone or region of the skull, as well as cluster analysis of 21-trait mean measures of divergence using multidimensional scaling and additive tree techniques, revealed good discrimination between the Jomon-Ainu indigenous lineage and that of the immigrants who arrived from continental Asia after 300 BC. In Hokkaido, in agreement with historical records, Ainu villages of Hidaka province were least, and those close to the Japan Sea coast were most, hybridized with Wajin. In the central islands, clines were identified among Wajin skeletal samples whereby those from Kyushu most resembled continental northeast Asians, while those from the northernmost prefectures of Tohoku apparently retained the strongest indigenous heritage. In the more southerly prefectures of Tohoku, stronger traces of Jomon ancestry prevailed in the cohort born during the latest Edo period than in the one born after 1870. Thus, it seems that increased inter-regional mobility and gene flow following the Meiji Restoration initiated the most recent episode in the long process of demic diffusion that has helped to shape craniofacial change in Japan.

Influence of growth hormone on the craniofacial complex of transgenic mice

Growth hormone (GH) secretion affects bone and cartilage physiology. This study investigated the effect of GH on the size of the craniofacial structures and their angular relationship. Three different models of mice with a genetically altered GH axis were used: GH excess (giant), dwarf GH antagonist (dwarf-Ant), and dwarf GH receptor knockout (dwarf-KO) mice. Each model was compared with the corresponding wild type (Wt). Five craniofacial distances were analysed: craniofacial length, upper face height, mandibular anterior height, mandibular ramus length, and mandibular corpus length. In addition, upper and lower incisor lengths and four angular relationships, nasal bone with cranial base, maxillary plane with cranial base, mandibular plane with cranial base, and the angle of the mandible, were determined. Data were analysed by one-way ANOVA. Craniofacial length, upper face height and mandibular corpus length were significantly increased in the giant mice and significantly reduced in the dwarf mice. Mandibular anterior height and mandibular ramus length were significantly affected in the dwarf-KO mice but not in the giant mice. The length of both the upper and lower incisors was significantly increased and reduced in the giant and dwarf-KO mice, respectively. In addition, the angle of the mandible was significantly increased in the giant mice and significantly reduced in the dwarf mice. It is concluded that GH plays a major role in the growth and development of the craniofacial complex by directly and indirectly modulating the size and the angular relationships of the craniofacial structures, including the incisor teeth.

In vitro bioactivity of MOEP grafted ePTFE membranes for craniofacial applications

The bioactivity of three methacryloyloxyethyl phosphate (MOEP) grafted expanded polytetrafluoroethylene (ePTFE) membranes with varying surface coverage as well as unmodified ePTFE was investigated through a series of in vitro tests: calcium phosphate (CaP) growth in simulated body fluid (SBF), serum protein adsorption, and a morphology and attachment study of human osteoblast-like SaOS-2 cells. The graft copolymers were prepared by means of gamma irradiation induced grafting and displayed various surface morphologies and wettabilities depending on the grafting conditions used. Unmodified ePTFE did not induce nucleation of Cal? minerals, whereas all the grafted membranes revealed the growth of Cal? minerals after 7 days immersion in SBF. The sample with lowest surface grafting yield (24% coverage), a smooth graft morphology and relatively high hydrophobicity (theta(adv) = 120 degrees, theta(rec) = 80 degrees) showed carbonated hydroxyapatite growth covering the surface. On the other hand, the samples with high surface grafting yield (76% and 100%), a globular graft morphology and hydrophilic surfaces (theta(adv) = 60 degrees and 80 degrees, theta(rec) = 25 degrees and 15 degrees, respectively) exhibited irregular growth of non-apatitic Cap minerals. Irreversibly adsorbed protein measured after a 1 h immersion in serum solution was quantified by the amount of nitrogen on the surface using XPS, as well as by weight increase. All grafted membranes adsorbed 3-6 times more protein than the unmodified membrane. The sample with the highest surface coverage adsorbed the most protein. Osteoblast-like SaOS-2 cells cultured for 3 h revealed significantly higher levels of cell attachment on all grafted membranes compared to unmodified ePTFE. Although the morphology of the cells was heterogeneous, in general, the higher grafted surfaces showed a much better cell morphology than both the low surface-grafted and the control unmodified sample. The suite of in vitro tests confirms that a judicious choice of grafted monomer such as the phosphate-containing methacrylate monomer (MOEP) significantly improves the bioactivity of ePTFE in vitro. (c) 2005 Elsevier Ltd. All rights reserved.

Ethnogenesis and Craniofacial Change in Japan from the Perspective of Nonmetric Traits

To examine population affinities in light of the ‘dual structure model’, frequencies of 21 nonmetric cranial traits were analyzed in 17 prehistoric to recent samples from Japan and five from continental northeast Asia. Eight bivariate plots, each representing a different bone or region of the skull, as well as cluster analysis of 21-trait mean measures of divergence using multidimensional scaling and additive tree techniques, revealed good discrimination between the Jomon-Ainu indigenous lineage and that of the immigrants who arrived from continental Asia after 300 BC. In Hokkaido, in agreement with historical records, Ainu villages of Hidaka province were least, and those close to the Japan Sea coast were most, hybridized with Wajin. In the central islands, clines were identified among Wajin skeletal samples whereby those from Kyushu most resembled continental northeast Asians, while those from the northernmost prefectures of Tohoku apparently retained the strongest indigenous heritage. In the more southerly prefectures of Tohoku, stronger traces of Jomon ancestry prevailed in the cohort born during the latest Edo period than in the one born after 1870. Thus, it seems that increased inter-regional mobility and gene flow following the Meiji Restoration initiated the most recent episode in the long process of demic diffusion that has helped to shape craniofacial change in Japan.

Software for Designing Custom Orbital-Craniofacial Implant Plans

Purpose: Custom cranio-orbital implants have been shown to achieve better performance than their hand-shaped counterparts by restoring skull anatomy more accurately and by reducing surgery time. Designing a custom implant involves reconstructing a model of the patient's skull using their computed tomography (CT) scan. The healthy side of the skull model, contralateral to the damaged region, can then be used to design an implant plan. Designing implants for areas of thin bone, such as the orbits, is challenging due to poor CT resolution of bone structures. This makes preoperative design time-intensive since thin bone structures in CT data must be manually segmented. The objective of this thesis was to research methods to accurately and efficiently design cranio-orbital implant plans, with a focus on the orbits, and to develop software that integrates these methods. Methods: The software consists of modules that use image and surface restoration approaches to enhance both the quality of CT data and the reconstructed model. It enables users to input CT data, and use tools to output a skull model with restored anatomy. The skull model can then be used to design the implant plan. The software was designed using 3D Slicer, an open-source medical visualization platform. It was tested on CT data from thirteen patients. Results: The average time it took to create a skull model with restored anatomy using our software was 0.33 hours ± 0.04 STD. In comparison, the design time of the manual segmentation method took between 3 and 6 hours. To assess the structural accuracy of the reconstructed models, CT data from the thirteen patients was used to compare the models created using our software with those using the manual method. When registering the skull models together, the difference between each set of skulls was found to be 0.4 mm ± 0.16 STD. Conclusions: We have developed a software to design custom cranio-orbital implant plans, with a focus on thin bone structures. The method described decreases design time, and is of similar accuracy to the manual method.

Application of augmented reality in craniofacial surgery: a feasibility study

Augmented Reality (AR) is a novel promising technology, which is gaining success in the medical field. A number of applications in surgery have been described, but few studies have been focusing on pediatric craniofacial surgery. In this research project, the Authors have been implementing a system for intraoperative surgical navigation by means of HoloLens 2 by Microsoft, applied to pediatric craniofacial surgery. The Authors tested the device in a preclinical setting first, and then moved to patients. The Authors assessed the accuracy of the HoloLens 2 by performing 36 procedures in vitro on a printed 3D model of a patient. In clinical setting, 10 patients were prospectively enrolled in the study. The virtual surgical planning was designed for each patient and uploaded onto the software which allows for the AR interface and the standard neurosurgical navigator. For each patient, the surgeon has been drawing osteotomy lines both under the guidance of HoloLens2 and of the neurosurgical navigator. The Author then checked the accuracy with calibrated CAD CAM cutting guides with different grooves, in order to assess the accuracy of the osteotomies performed. We tested levels of accuracy of ±1.5 mm and ±1mm . In the preclinical setting, the HoloLens 2 performed with levels of accuracy of 1.5 mm, whereas in the real setting, surgeons were able to trace the osteotomy lines under the AR guidance for an amount of 45% (0.4 SD) of the entire line, with an accuracy level of ±1.5 mm. This percentage lowers to 34% (0.4 SD) when assessing accuracy level of ±1 mm. The results of the same tasks for the standard navigator are 36% and 16%, for ±1.5 mm and ± 1 mm accuracy level, respectively. The Authors reported encouraging results both in the preclinical and the clinical setting.

Relationship Between Orofacial Function, Dentofacial Morphology, And Bite Force In Young Subjects.

The aim was to evaluate the relationship between orofacial function, dentofacial morphology, and bite force in young subjects. Three hundred and sixteen subjects were divided according to dentition stage (early, intermediate, and late mixed and permanent dentition). Orofacial function was screened using the Nordic Orofacial Test-Screening (NOT-S). Orthodontic treatment need, bite force, lateral and frontal craniofacial dimensions and presence of sleep bruxism were also assessed. The results were submitted to descriptive statistics, normality and correlation tests, analysis of variance, and multiple linear regression to test the relationship between NOT-S scores and the studied independent variables. The variance of NOT-S scores between groups was not significant. The evaluation of the variables that significantly contributed to NOT-S scores variation showed that age and presence of bruxism related to higher NOT-S total scores, while the increase in overbite measurement and presence of closed lip posture related to lower scores. Bite force did not show a significant relationship with scores of orofacial dysfunction. No significant correlations between craniofacial dimensions and NOT-S scores were observed. Age and sleep bruxism were related to higher NOT-S scores, while the increase in overbite measurement and closed lip posture contributed to lower scores of orofacial dysfunction.