Occupational exposure of truck drivers to dust and polynuclear aromatic hydrocarbons: a pilot study in Geneva, Switzerland.

The exposure to dust and polynuclear aromatic hydrocarbons (PAH) of 15 truck drivers from Geneva, Switzerland, was measured. The drivers were divided between "long-distance" drivers and "local" drivers and between smokers and nonsmokers and were compared with a control group of 6 office workers who were also divided into smokers and nonsmokers. Dust was measured on 1 workday both by a direct-reading instrument and by sampling. The local drivers showed higher exposure to dust (0.3 mg/m3) and PAH than the long-distance drivers (0.1 mg/m3), who showed no difference with the control group. This observation may be due to the fact that the local drivers spend more time in more polluted areas, such as streets with heavy traffic and construction sites, than do the long-distance drivers. Smoking does not influence exposure to dust and PAH of professional truck drivers, as measured in this study, probably because the ventilation rate of the truck cabins is relatively high even during cold days (11-15 r/h). The distribution of dust concentrations was shown in some cases to be quite different from the expected log-normal distribution. The contribution of diesel exhaust to these exposures could not be estimated since no specific tracer was used. However, the relatively low level of dust exposure dose not support the hypothesis that present day levels of diesel exhaust particulates play a significant role in the excess occurrence of lung cancer observed in professional truck drivers.

House dust mites in Brazil - an annotated bibliography

House dust mites have been reported to be the most important allergen in human dwellings. Several articles had already shown the presence of different mite species at homes in Brazil, being Pyroglyphidae, Glycyphagidae and Cheyletidae the most important families found. This paper is an annotated bibliography that will lead to a better knowledge of house dust mite fauna in Brazil.

Cotton Rats (Sigmodon hispidus) and Black Rats (Rattus rattus) as Possible Reservoirs of Leishmania spp. in Lara State, Venezuela

A total of 519 wild animals belonging to eleven species were collected during a two year study in a cutaneous leishmaniasis endemic area in Venezuela (La Matica, Lara State). The animals were captured in home-made Tomahawk-like traps baited with maize, bananas or other available local fruits, and parasites were isolated from 27 specimens. Two different species were found naturally infected with flagellates, i.e., cotton rats (Sigmodon hispidus) and black rats (Rattus rattus). Characterization of the parasites using PCR, kDNA restriction pattern and hybridization with species-specific probes revealed the presence of Leishmania (L.) mexicana in three of the black rats and Leishmania (V.) braziliensis in two others. The latter species was also identified in the single positive specimen of S. hispidus. The results suggested both species of animals as possible reservoirs of Leishmania sp.

The Tightness of the Cotton Swabs Meshing Influences the Chances of Getting Conclusive DNA Profiles

Objective: The chance of obtaining a conclusive DNA profile strongly depends on the quantity of biological material that can be recovered from a crime scene sample. Optimizing the collection strategy is therefore of prime interest. A difference in the level of tightness of the cotton meshed around the shaft has been observed between manufacturers and is hypothesized to affect the collection and subsequent release capacity of cotton swabs. Consequently, we compared the performance of cotton swabs from two different suppliers: Applimed SA and DryswabTM. Methods: These swabs were used to recover 50 ml of blood, either pure or diluted (1:1000 and 1:5000), deposited on both smooth and absorbent surfaces. Performance was compared in terms of ease of use, concentration of extracted DNA, and quality of DNA profiles. DNA quantification was obtained by real-time PCR using the QuantifilerTM Human DNA Quantification Kit. Evaluation of DNA profiles was based on profiles obtained using AmpFlSTR® NGM SElectTM PCR Amplification kit. Results: When considering smooth surfaces, recovered DNA was more concentrated when using the DryswabTM than the Applimed SA cotton swab. More precisely, DNA concentrations ranged from 15.7 to 28.8 ng/ml and 6.7 to 21.2 ng/ml, respectively for samples of pure blood. The same trend was observed for the absorbent surface, with 2.0 to 5.0 ng/ml and 0.9 to 1.4 ng/ml, respectively. Conclusion: Our results illustrate that different cotton swabs produce different results in terms of ease of use and quantity of recovered DNA and this should be taken into consideration when choosing which swab to use at both the crime scene and laboratory. More specifically, results from the present study suggest that looser meshing of the cotton fibres

Determination and Evaluation of Alternative Methods for Managing and Controlling Highway-Related Dust Phase II—Demonstration Project, June 2005

The State of Iowa currently has approximately 69,000 miles of unpaved secondary roads. Due to the low traffic count on these unpaved o nts as ng e two dust ed d roads, paving with asphalt or Portland cement concrete is not economical. Therefore to reduce dust production, the use of dust suppressants has been utilized for decades. This study was conducted to evaluate the effectiveness of several widely used dust suppressants through quantitative field testing on two of Iowa’s most widely used secondary road surface treatments: crushed limestone rock and alluvial sand/gravel. These commercially available dust suppressants included: lignin sulfonate, calcium chloride, and soybean oil soapstock. These suppressants were applied to 1000 ft test sections on four unpaved roads in Story County, Iowa. Tduplicate field conditions, the suppressants were applied as a surface spray once in early June and again in late August or early September. The four unpaved roads included two with crushed limestone rock and two with alluvial sand/gravel surface treatmewell as high and low traffic counts. The effectiveness of the dust suppressants was evaluated by comparing the dust produced on treated and untreated test sections. Dust collection was scheduled for 1, 2, 4, 6, and 8 weeks after each application, for a total testiperiod of 16 weeks. Results of a cost analysis between annual dust suppressant application and biennial aggregate replacement indicated that the cost of the dust suppressant, its transportation, and application were relatively high when compared to that of thaggregate types. Therefore, the biennial aggregate replacement is considered more economical than annual dust suppressant application, although the application of annual dust suppressant reduced the cost of road maintenance by 75 %. Results of thecollection indicated that the lignin sulfonate suppressant outperformed calcium chloride and soybean oil soapstock on all four unpavroads, the effect of the suppressants on the alluvial sand/gravel surface treatment was less than that on the crushed limestone rock, the residual effects of all the products seem reasonably well after blading, and the combination of alluvial sand/gravel surface treatment anhigh traffic count caused dust reduction to decrease dramatically.

Respiratory effects of an exposure to grain dust among grain workers in the Vaud region (Switzerland)

Introduction: Bioaerosols such as grain dust (GD) elicit direct immunological reactions within the human respiratory system. Workplace-dependent exposure to GD may induce asthma, chronic bronchitis, and hypersensitivity pneumonitis. Aims: To assess the clinical impact of occupational exposure to GD and to determine quantitative biological markers of bioaerosol exposure in grain workers. Methods: This longitudinal study has been conducted from summer 2012 to summer 2013, comprising 6 groups of 30 active workers with different GD exposure patterns (4 groups of grain workers, 2 control groups). Two evaluations at high- and low-exposing seasons take place, during which an occupational and a medical history are questionnaire-assessed, lung function is evaluated by spirometry, airway inflammation is measured by exhaled nitric oxide (eNO) and specific blood IgG and IgE are titrated. Results: The preliminary results are those of 2 of the 4 exposed groups, (harvesters and mill workers), compared to the control groups, at first assessment (n=100). Mean age is 38.4 [years]; 98% are male. Exposed groups differ from controls (p<0.05) in daily contact with animals (57% vs. 40%) and active smoking (39% vs. 11%). Grain workers have more respiratory (50%), nasal (57%), ocular (45%) and dermatologic (36%) occupational symptoms than controls (6.4%, 19%, 16%, 6.4% respectively, p<0.05). Lower mean peak-expiratory-flow (PEF) values (96.1 ± 18.9 vs. 108.2 ± 17.4 [% of predicted], p<0.05) and eNO values (13.9 ± 9.6 vs. 20.5 ± 14.7 [ppm], p<0.05) are observed in the exposed groups. Conclusion: Preliminary results show a higher prevalence of clinical symptoms and a lower mean PEF value in the groups exposed to GD.

Direct Cost of Reprocessing Cotton-woven Surgical Drapes: a Case Study

OBJECTIVE Identify the direct cost of reprocessing double and single cotton-woven drapes of the surgical LAP package. METHOD A quantitative, exploratory and descriptive case study, performed at a teaching hospital. The direct cost of reprocessing cotton-woven surgical drapes was calculated by multiplying the time spent by professionals involved in reprocessing the unit with the direct cost of labor, adding to the cost of materials. The Brazilian currency (R$) originally used for the calculations was converted to US currency at the rate of US$0.42/R$. RESULTS The average total cost for surgical LAP package was US$9.72, with the predominance being in the cost of materials (US$8.70 or 89.65%). It is noteworthy that the average total cost of materials was mostly impacted by the cost of the cotton-woven drapes (US$7.99 or 91.90%). CONCLUSION The knowledge gained will subsidize discussions about replacing reusable cotton-woven surgical drapes for disposable ones, favoring arguments regarding the advantages and disadvantages of this possibility considering human resources, materials, as well as structural, environmental and financial resources.

Characterization of modern and fossil mineral dust transported to high altitude in the Western Alps: Saharan sources and transport patterns

Mineral dust aerosols recently collected at the high-altitude Jungfraujoch research station (46 degrees 33'51 `' N, 7 degrees 59'06 `' E; 3580 m a.s.l.) were compared to mineral dust deposited at the Colle Gnifetti glacier (45 degrees 52'50 `' N, 7 degrees 52'33 `' E; 4455 m a.s.l.) over the last millennium. Radiogenic isotope signatures and backward trajectories analyses indicate that major dust sources are situated in the north-central to north-western part of the Saharan desert. Less radiogenic Sr isotopic compositions of PM10 aerosols and of mineral particles deposited during periods of low dust transfer likely result from the enhancement of the background chemically-weathered Saharan source. Saharan dust mobilization and transport were relatively reduced during the second part of the Little Ice Age (ca. 1690-1870) except within the greatest Saharan dust event deposited around 1770. After ca. 1870, sustained dust deposition suggests that increased mineral dust transport over the Alps during the last century could be due to stronger spring/summer North Atlantic southwesterlies and drier winters in North Africa. On the other hand, increasing carbonaceous particle emissions from fossil fuel combustion combined to a higher lead enrichment factor point to concomitant anthropogenic sources of particulate pollutants reaching high-altitude European glaciers during the last century.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

Subcontracting and vertical integration in the Spanish cotton industry

This paper examines changes in the organization of the Spanish cotton industry from 1720 to 1860 in its core region of Catalonia. As the Spanish cotton industry adopted the most modern technology and experienced the transition to the factory system, cotton spinning and weaving mills became increasingly vertically integrated. Asset specificity more than other factors explained this tendency towards vertical integration. The probability for a firm of being vertically integrated was higher among firms located in districts with high concentration ratios and rose with size and the use of modern machinery. Simultaneously, subcontracting predominated in other phases of production and distribution where transaction costs appears to be less important.

Labour market in the Catalan cotton textile sector: Employment and fertility (1850-1913)

This paper deals whit the dynamics of the Catalan textile labour market (theSpanish region that concentrated most of the industrial and factory activity duringthe 19 Century) and offers hypotheses and results on the impact it had on livingstandards and fertility levels. We observe the formation of an uneven labourmarket in which male supply for labour (excluding women and children) grewmuch faster than the demand. We stress the fact that labour supply is verydependant on institutional factors liked to the transmition of household propertybetween generations. Instead the slow path of growth of adult males demand forlabour is witnessing the limits of this industry to expand and to compete ininternational markets. The strategy of working class families to adapt to scarceopportunities of employment we document here is the diminution of legitimatefertility levels. Fertility control is the direct instrument we think workers have tocontrol their number in a situation that was likely to create labour surpluses in theshort and mid run.

Effect of silicon and acibenzolar-s-methyl on colored cotton plants infested or not with Aphis gossypii Glover (Hemiptera, Aphididae)

Effect of silicon and acibenzolar-s-methyl on colored cotton plants infested or not with Aphis gossypii Glover (Hemiptera, Aphididae). The aphid Aphis gossypii is an insect pest that causes damage mainly at the beginning of the cotton plant development. The effect of resistance inductors silicon and acibenzolar-s-methyl (ASM) on the development of colored cotton plants were researched in the presence and absence of A. gossypii. Three colored cotton cultivars were sown in pots and individually infested with 25 apterous aphids, 13 days after the application of the inductors. Fifteen days after plant emergence, the silicon was applied at a dosage equivalent to 3 t/ha and acibenzolar-s-methyl in 0.2% solution of the product BION 500®. After 21 days of infestation the following parameters were evaluated: plant height, stem diameter, dry matter of aerial part and root, and total number of aphids replaced. It was verified that the plant height was reduced in the presence of aphids and all variables were negatively affected by the application of ASM. However, silicon did not affect plant development.

The lesser cotton leafworm, Anomis impasta (Guenée) (Lepidoptera, Noctuidae), in cotton

Anomis impasta (Guenée) is a species that shows remarkable morphological and behavioral similarities with the cotton leafworm Alabama argillacea (Hübner). During two growing cotton seasons, A. impasta was observed feeding on leaves and flower bracts of cotton and monitored. Furthermore, a study was conducted under laboratory conditions to generate biological information about this species with larvae feeding cotton squares and leaves. Larvae fed on cotton squares exhibited delayed development (18.5 ± 0.18 days) and lower pupal weight (140.8 ± 2.26 mg) compared to larvae fed on cotton leaves (14.0 ± 0.07 days and 169.3 ± 2.06 mg). Thus, one generation cycle of A. impasta was obtained by feeding the larvae with cotton leaves. The mean (minimum-maximum) values for the duration of eggs, larvae and pupae were: 3.0 (3-4), 14.8 (14-18), and 9.7 (7-14) days, respectively. The viability of the eggs, larvae, and pupae were 43.7, 98.3, and 94.7%, respectively. Females lived on average 25.2 days (ranging from 15 to 37 days) and produced 869 eggs (from 4 to 1,866 eggs). The successful development and reproduction of A. impasta on cotton, especially, on the cotton leaves, suggest the potential of this species to reach a pest status in cotton. The similarities with A. argillacea, as discussed in this study, can be one of the reasons for low reference to A. impasta in the field. Therefore, the information provided here will allow researchers and growers to distinguish these two cotton defoliators.

Population growth and within-plant distribution of the striped mealybug Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae) on cotton

Population growth and within-plant distribution of the striped mealybug Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae) on cotton. The striped mealybug, Ferrisia virgata (Cockerell) (Hemiptera, Pseudococcidae), is a widely distributed and polyphagous pest species, which naturally occurs on cotton plants in Brazil. This study evaluated the establishment and population growth as well as the within-plant distribution of F. virgata on four cotton cultivars: CNPA 7H (white fibers), BRS Verde, BRS Safira, and BRS Rubi (colored fibers). The experiment was conducted in a complete randomized design with four treatments (cultivars) and 18 replications of each. Thus, cotton plants of each cultivar were infested with 100 newly hatched nymphs of F. virgata. The number of adult female mealybugs and the total number of mealybugs per plant were quantified, respectively, at 25 and 50 days after infestation. The developmental and pre-reproductive periods were also determined. Furthermore, we verified the distribution of F. virgata on the plant parts at 25 and 50 days after infestation. Ferrisia virgata showed similar growth of 412-fold in the four cotton cultivars studied. Also, the nymphs were spread on infested leaves; the secondgeneration nymphs were spread and established in all plant parts. Our results characterize F. virgata as having much potential as an important cotton pest in Brazil.

Long-range transport of Saharan dust to northern Europe: The 11-16 October 2001 outbreak observed with EARLINET

The spread of mineral particles over southwestern, western, and central Europeresulting from a strong Saharan dust outbreak in October 2001 was observed at10 stations of the European Aerosol Research Lidar Network (EARLINET). For the firsttime, an optically dense desert dust plume over Europe was characterized coherentlywith high vertical resolution on a continental scale. The main layer was located abovethe boundary layer (above 1-km height above sea level (asl)) up to 3–5-km height, andtraces of dust particles reached heights of 7–8 km. The particle optical depth typicallyranged from 0.1 to 0.5 above 1-km height asl at the wavelength of 532 nm, andmaximum values close to 0.8 were found over northern Germany. The lidar observationsare in qualitative agreement with values of optical depth derived from Total OzoneMapping Spectrometer (TOMS) data. Ten-day backward trajectories clearly indicated theSahara as the source region of the particles and revealed that the dust layer observed,e.g., over Belsk, Poland, crossed the EARLINET site Aberystwyth, UK, and southernScandinavia 24–48 hours before. Lidar-derived particle depolarization ratios,backscatter- and extinction-related A ° ngstro¨m exponents, and extinction-to-backscatterratios mainly ranged from 15 to 25%, 0.5 to 0.5, and 40–80 sr, respectively, within thelofted dust plumes. A few atmospheric model calculations are presented showing the dustconcentration over Europe. The simulations were found to be consistent with thenetwork observations.