Advanced ceramics: Evaluation of the mechanism of stock removal and ground surface quality

The aim of this work is to evaluate the mechanism of stock removal and the ground surface quality of advanced ceramics machined by a surface grinding process using diamond grinding wheels. The analysis of the grinding performance was done regarding the cutting surface wear behavior of the grinding wheel for ceramic workpieces. The ground surface was evaluated using Scanning Electron Microscopy (SEM). As a result it can be said that the mechanism of material removal in the grinding of ceramic is largely one of brittle fracture. The increase of the hmax can reduce the tangential force required by the process. Although, it results in an increase in the surface damage, reducing the mechanical properties of the ground component.

Finishing of flat parts led by lapping kinematics on abrasive disc dressed in agreement with overlap factors

This paper discusses the investigation of an abrasive process for finishing flat workpieces, based on the combination of important grinding and lapping characteristics. Instead of loose abrasive grains between the workpiece and the lapping plate, a resinoid grinding wheel of hot-pressed silicon carbide is placed on the plate of a device resembling a lapping machine. The resin bond grinding wheel is dressed with a single-point diamond. In addition to keeping the plate flat, dressing also plays the role of interfering in the behavior of the process by varying the overlap factor (Ud). It was found that the studied process simplify the set-up and can be controlled more easily than in lapping, whose is a painstaking process. The surface roughness and flatness deviation proved comparable to those of lapping, or even finer than it, with the additional advantage of a less contaminated workpiece surface with a shiny appearance. The process was also monitored by acoustic emission (AE), which indicates to be a promissing and suitable technique for use in this process. Copyright © 2008 by ASME.

Application of MLP and Kohonen networks for recognition of wear patterns of single-point dressers

Grinding is a parts finishing process for advanced products and surfaces. However, continuous friction between the workpiece and the grinding wheel causes the latter to lose its sharpness, thus impairing the grinding results. This is when the dressing process is required, which consists of sharpening the worn grains of the grinding wheel. The dressing conditions strongly affect the performance of the grinding operation; hence, monitoring them throughout the process can increase its efficiency. The objective of this study was to estimate the wear of a single-point dresser using intelligent systems whose inputs were obtained by the digital processing of acoustic emission signals. Two intelligent systems, the multilayer perceptron and the Kohonen neural network, were compared in terms of their classifying ability. The harmonic content of the acoustic emission signal was found to be influenced by the condition of dresser, and when used to feed the neural networks it is possible to classify the condition of the tool under study.

Neural networks models for wear patterns recognition of single-point dresser

Grinding is a workpiece finishing process for advanced products and surfaces. However, the constant friction between workpiece and grinding wheel causes the latter to lose its sharpness, thereby impairing the result of the grinding process. When this occurs, the dressing process is essential to sharpen the worn grains of the grinding wheel. The dressing conditions strongly influence the performance of the grinding operation; hence, monitoring them throughout the process can increase its efficiency. The purpose of this study was to classify the wear condition of a single-point dresser using intelligent systems whose inputs were obtained by digitally processing acoustic emission signals. Two multilayer perceptron (MLP) neural networks were compared for their classification ability, one using the root mean square (RMS) statistics and another the ratio of power (ROP) statistics as input. In this study, it was found that the harmonic content of the acoustic emission signal is influenced by the condition of the dresser, and that the condition of the tool under study can be classified by using the aforementioned statistics to feed a neural network. © IFAC.

Lógica ANFIS aplicada na estimação da rugosidade e do desgaste da ferramenta de corte no processo de retificação plana de cerâmicas avançadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de modelos neurais aplicados na estimação de parâmetros da retificação de cerâmicas avançadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Classificação de níveis de desgaste de dressadores de ponta única utilizando sinais de emissão acústica e redes neurais artificiais

Pós-graduação em Engenharia Elétrica - FEB

Monitoramento da dressagem na retificação através do sinal puro de emissão acústica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação de novas ferramentas estatísticas e utilização de microcontrolador no monitoramento da queima na retificação plana tangencial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema de detecção automática on-line de danos térmicos no processo de retificação com monitoramento via internet

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo comparativo de medição de força de corte no processo de retificação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Monitoramento da dressagem do processo de retificação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Usinagem a verde voltada à melhoria da distorção e acabamento superficial de cerâmicas sinterizadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avanços no desenvolvimento de um processo de acabamento para peças planas submetidas à cinemática de lapidação sobre um rebolo dressado com grau de recobrimento

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização da mínima quantidade de lubrificante (MQL) com água no processo de retificação cilíndrica externa de mergulho de cerâmicas com rebolo diamantado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)