539 resultados para C02


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Ce-基催化剂在汽车尾气净化,工业废气处理,烃类重整,烃类选择加氢等方面均有广泛的应用。近几十年来关于如何制备高活性、高稳定性的非贵金属复合氧化物催化剂一直是催化研究的重要课题之一。Ce-基催化剂主要都是通过其它金属氧化物M掺杂到CeO_2中形成Ce_(1-x)M_xO(M为掺杂物)固溶体。本文选用CeO_2作为主要研究对象,用柠檬酸法有目的的引入化学特性、离子半径不同的另一组分,用x值表示各元素间的化学计量比,优化催化剂的组成、结构,来调节所合成固溶体氧化物的物理化学性质。分别以碱土金属Ca、稀土金属La以及过渡金属Ni和Mn为掺杂物制备出含其它不同离子的Ce-基催化剂;将具有较高活性的Ni_(0.7)Ce_(0.3)O负载在ZrO_2上,以CH_4燃烧为模型反应,考察催化剂活性和氧化还原性的关系。1.Ce-Ca-La-O体系单独Ca或La分别加入到CeO_2中后催化剂的活性比单独的CeO_2的活性要高出很多,完全转化温度要下降近100℃,而且它们的H_2-TPR实验也证实了其氧化还原能力有很大的提高。将Ca和La同时引入到CeO_2的复合氧化物Ce-La-Ca-O材料,其活性比无La的Ce-Ca-O的活性没有明显的提高,而且反而要比Ce-La-O的活性低,且其HZ一TPR实验也显示出和复合氧化物Ce-Ca-O的轮廓一样。2.Ce-Ni-Mn-O体系对NiO、MnO_x、CeO_2三种金属氧化物,在优化两种金属氧化物最佳配比(组成)后,在复合氧化物中掺杂第三种金属氧化物以考察第三种金属对其甲烷燃烧活性的影响。(l)CeO_2-MnO_x体系中,在Ce_(0.8)Mn_(0.2)O掺杂NiO后,发现当Ni的摩尔量为-10%时,活性提高幅度的很大,完全燃烧的温度下降了近50℃,可在550℃将CH_4完全氧化到CO_2。(2)CeO_2-NiO体系中,Ce_(0.3)Ni_(0.7)O可在530℃将CH_4完全氧化到CO_2。向其中掺杂Mn后,复合氧化物的活性反而下降,要在550oC才能将CH4完全氧化到C02。这可能是阴离子缺陷减少所致。(3)NIO一Mnox体系中,Nio,IMn090掺杂Ce后,催化活性有大幅度提高,特别是Nio.ICeyMno90(0.3三y生0.8)中催化剂的活性更高,可在530oC体系中,其中y=0.5时更突出。3.Ni-Ce-O/ZrOZ体系(1)Ni1-x一Cex一O体系中,独立的CeOZ相促进了NIO的还原和表面积增加。(2)少量的CeOZ的掺杂明显改善了NIO对cH4完全氧化反应的活性。继续增加Ce的量催化活性弱有增加,然后下降。在Ce的掺杂量为30%时,即Nio7Ceo3O,催化活性最佳,此时甲烷完全转化的温度为530oC。(3)催化剂Ni07Ceo3O具有很好的稳定性,900oC下焙烧,还能在540oC将CH4完全氧化到COZ。(4)催化剂Pd/Ni07Ceo30的催化活性与Pd/A12O3的活性相当。(5)催化剂Ni07Ce03O负载在不同的载体上,发现ZrOZ作载体效果最佳,其次为5102,这可能是ZrOZ、5102对NIO、CeOZ相对惰性有关;而MgO、A1203虽表面积较大,但作为载体效果却不好,可能其易与NIO、CeOZ发生反应有关。(6)Nio7Ceo3O负载在ZrOZ上,提高了表面积同时促进了Nio7Ceo3O还原性,以负载量为50%时活性最好。结构分析发现有两个新相生成,Ni4Zro和CeZO3。(7)通过对比发现Nio7Ceo3O(50%)/ZrOZ体系高活性除了ZrOZ作为载体提高表面积外,Zr02和Ce在这里还起到助催化剂的作用。4.还探讨了Pr掺杂到CeO2,以及YSZ作为载体负载过渡金属氧化物在甲烷催化燃烧反应种的作用。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

本论文以长白山阔叶红松林为研究对象,观测了阔叶红松林主要树种的光合生理生态特征,建立了单叶化汁卜片的光合作用模型,上推出群落的生产力模型,采用基于干物质生产过程的模型Sim-CYCLE,模型了该生态系统对·气候变化的响应。得到主要结论如下:(1)、在不同的CO2浓度和光合有效辐射条件下,长白山阔价卜红松林主要树种净光合速率月动态规律不同;气孔导度随着瞬时光合有效辐射强度和C02浓度的增加而有下降趋势。(2)、建立的适用于阔价f一红松林的单叶化气孔导度对环境因子气温(Ta)、光合有效辐射(PAR)、饱和水汽压(VPD)的响应模型:gs=PAR(-1.606Ta2+118.192Ta+1878.67)/(355.700+PAR)(-430.433+VPL),这是一个基于叶片光合机理的群落生产力模型,在模拟了长白山阔叶红松林群落生产力时取得了满意的效果。(3)、采用干物质产量理论的Sim-CYCLE模型,通过样地尺度的参数化模拟表明,长白山阔叶红松林生态系统的总初级生产力(GPP)为14.89Mgcha-1、净初级生产力(NPP)为8.22MgCha-1、净生态系统生产力困EP)为2.67MgCha-1;在CO2倍增和温度上升时碳积累在增加,净初级生产力(NPP)为9.03±1.51MgCha-1、净生态系统生产力(NEP)为2.95±0.47MgCha-1。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

将Hartmann-Sprenger(H-S)管集成到传统射流装置中形成激励射流,研究其在超声速流场中的混合特性.设计了3种频率的C02激励射流,将其横向注入Ma=2.5的均匀超声速来流当中.采用平面激光散射技术对其进行瞬态可视化成像,利用组分采样进行时均分析,结果表明: H-S激励射流可以有效提高射流穿透深度,形成较多大尺度结构,从而获得较好的混合效果

Relevância:

10.00% 10.00%

Publicador:

Resumo:

在吉林省长白山地区模拟检测了大气CO2浓度升高对土壤氮循环关键过程的影响。试验采用完全随机区组设计的开顶箱系统模拟环境CO2和高浓度CO2,起始于1999年春。选取长白山特有树种长白松(Pinus sylvestris var.sylvestri-formu),种子播种于1999年5月份,萌芽后开始CO2熏蒸处理。CO2熏蒸处理始于每年4月末止于10月末。分别在2006年6月、8月和2007年6月采集土壤样品,并检测土壤硝化酶(NEA)、反硝化酶(DEA)和固氮酶活性。结果表明,高浓度C02使土壤硝化酶(NEA)活性显著提高,提高幅度2006年6月为30.3%,2006年8月为30.9%,2007年6月为11.3%;土壤反硝化酶活性(DEA)在2006年6月份(P<0.012)和2006年8月份(P<0.005)被C02浓度升高显著抑制;在整个研究过程中没有发现C02浓度升高对固氮酶活性产生显著影响。因此,本研究认为C02浓度升高显著影响了土壤硝化酶(NEA)和反硝化酶活性(DEA)。图3表1参44。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Potentilla fruticosa scrub, Kobresia humilis meadow and Kobresia tibetica meadow are widely distributed on the Qinghai-Tibet Plateau. During the grass exuberance period from 3 July to 4September, based on close chamber-GC method, a study on CO2 emissions from different treatments was conducted in these meadows at Haibei research station, CAS. Results indicated that mean CO2emission rates from various treatments were 672.09+152.37 mgm-2h-1 for FC (grass treatment); 425.41+191.99 mgrn-2h-1 for FJ (grass exclusion treatment); 280.36+174.83 mgrn-2h-1 for FL (grass and roots exclusion treatment); 838.95+237.02 mgm-2h-1 for GG (scrub+grass treatment); 528.48+205.67 mgm-2h-1for GC (grass treatment); 268.97 ±99.72 mgm-2h-1 for GL (grass and roots exclusion treatment); and 659.20±94.83 mgm-2h-1 for LC (grass treatment), respectively (FC, FJ, FL, GG, GC, GL, LC were the Chinese abbreviation for various treatments). Furthermore, Kobresia humilis meadow, Potentilla fruticosa scrub meadow and Kobresia tibetica meadow differed greatly in average CO2 emission rate of soil-plant system, in the order of GG>FC>LC>GC. Moreover, in Kobresia humilis meadow,heterotrophic and autotrophic respiration accounted for 42% and 58% of the total respiration of soil-plant system respectively, whereas, in Potentilla fruticosa scrub meadow, heterotrophic and autotrophic respiration accounted for 32% and 68% of total system respiration from G-G; 49% and 51%from GC. In addition, root respiration from Kobresia humilis meadow approximated 145 mgCO2m-2h-1,contributed 34% to soil respiration. During the experiment period, Kobresia humilis meadow and Potentilla fruticosa scrub meadow had a net carbon fixation of 111.11 grn-2 and 243.89 grn-2,respectively. Results also showed that soil temperature was the main factor which influenced CO2 emission from alpine meadow ecosystem, significant correlations were found between soil temperature at 5 cm depth and CO2 emission from GG, GC, FC and FJ treatments. In addition, soil moisture may be the inhibitory factor of CO2 emission from Kobresia tibetica meadow, and more detailed analyses should be done in further research.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

流域化学侵蚀及其速率与流域生态和环境之间的关系是当前地表地球化学研究的重要前沿领域,其中碳酸盐岩的硫酸风化机制及其与区域碳循环的关系则是科学家们最为关注的科学问题。因此,近年通过研究西南喀斯特流域地表水地球化学对这一科学问题进行了研究,发现西南喀斯特地区河水一般含有较多的SO4^2-,从化学计量学、SO4^2-的占δ^34S和溶解无机碳(DIC)的δ^13C分析发现,硫循环中形成的硫酸广泛参与了流域碳酸盐矿物的溶解和流域侵蚀:西南喀斯特流域碳酸盐岩的侵蚀速率为97t/(km^2·a),消耗COz量为25t/(km^2·a)。对乌江流域河水硫酸盐离子的硫同位素研究结果认为:参与流域侵蚀的硫酸主要来自煤系地层硫化物和矿床硫化物的氧化及大气酸沉降,分别对河水SO4^2-的贡献为50%、27%和20.5%(其余2.5%的SO4^2-为硫酸盐蒸发岩的溶解);硫酸风化碳酸盐岩向大气净释放CO2的总通量为8.2t/(km^2·a),依此计算西南喀斯特区域向大气释放CO2的通量为4.4×10^12g/a,相当于每年西南碳酸盐岩风化消耗CO2总通量的33%。将乌江流域的研究结果对我国大陆碳酸盐岩分布区域进行相应计算发现,硫酸风化碳酸盐矿物向大气释放的C02总通量为28×10^12g/a,相当于全球硅酸盐风化消耗CO2量的26%。硫酸参与流域侵蚀改变了区域碳循环,人为过程可以通过释放酸沉降、矿业活动和土地利用等形式加速流域侵蚀和影响流域元素的生物地球化学循环.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

本论文在前人数据资料和研究成果的基础上,以北衙金矿床及其相关的富碱侵入岩作为主要研究对象,以探讨滇西新生代富碱火成岩成岩过程及富碱岩浆上升演化过程中的流体分异,北衙金矿床的成因,最终揭示北衙金矿床与相关的富碱侵入岩之间的关系为主要研究目的,通过主、微量(包括稀土)元素地球化学,Pb、Sr、Nd、C、O、S及He-Ar等同位素地球化学,以及流体包裹体地球化学等方面的研究获得以下主要认识:-1.滇西新生代富碱火成岩来源于EM-II型富集地慢,源区的交代富集过程与古特提斯洋壳的俯冲有关,俯冲板片的含水流体对上覆上慢楔的交代是滇西富碱侵入岩(相当于A型花岗岩)含水的原因,这次富碱岩浆活动是一次滞后的弧岩浆活动;富碱中、酸性岩浆由碱性玄武质岩浆混染约20%的主要来自变质基底的地壳物质演化而来;滇西新生代富碱岩浆具备岛弧岩浆的氧化条件(即fogfo2>FMQ+2,FMQ代表铁橄榄石一磁铁矿一石英氧缓冲),并在其上升演化过程中分异出大量的流体相,具有较大的An、Cu成矿潜力。2.北衙金矿的矿化时代33.0±1.5Ma与相关的富碱侵入岩的成岩时代(32-34Ma)一致。3,成矿早期流体或初始流体具有富碱岩浆在变质基底内分异的流体的Nd和sr同位素组成(Isr≈0.722390,ε Nd(t)≈-2.8)、矿区及外围富碱斑岩的平均Pb同位素组成(206Pb/204Pb=18.590,207Pb/204Pb=15.606,208Pb/204Pb=38.770)、与相关富碱斑岩一致的稀土配分模式、岩浆热液的C、O同位素组成(δ13C≈-5%0,61、尧11%0)、以及壳一慢混合He-Ar同位素组成(3He尸He;1 .80-1.94 Ra,3He/3 6Ar=1 .19 * 10-3-3.93火10·3)并显示明显的He-Ar分异(4oAr*/He=0.34-0.75),且以高温、高压、高盐度、富c02为特征,说明初始流体主要在变质基底内由富碱岩浆分异而来;初始流体在上升过程中由于温度、压力降低发生富co2相和盐水相的分离,成矿元素优先分配进入富COZ相,逐步演化为成矿阶段流体;成矿阶段流体在去气或与大气降水混合过程中释放出其中的成矿元素。4.约80%的成矿金属来自富碱岩浆,其余部分主要通过岩浆流体从变质基底摄取。结论:北衙金矿与相关的富碱侵入岩具有密切的成因关系。

Relevância:

10.00% 10.00%

Publicador:

Resumo:

UPNa. Instituto de Agrobiotecnología. Laboratorio de Biofilms Microbianos

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Phage-mediated transfer of microbial genetic elements plays a crucial role in bacterial life style and evolution. In this study, we identify the RinA family of phage-encoded proteins as activators required for transcription of the late operon in a large group of temperate staphylococcal phages. RinA binds to a tightly regulated promoter region, situated upstream of the terS gene, that controls expression of the morphogenetic and lysis modules of the phage, activating their transcription. As expected, rinA deletion eliminated formation of functional phage particles and significantly decreased the transfer of phage and pathogenicity island encoded virulence factors. A genetic analysis of the late promoter region showed that a fragment of 272 bp contains both the promoter and the region necessary for activation by RinA. In addition, we demonstrated that RinA is the only phage-encoded protein required for the activation of this promoter region. This region was shown to be divergent among different phages. Consequently, phages with divergent promoter regions carried allelic variants of the RinA protein, which specifically recognize its own promoter sequence. Finally, most Gram-postive bacteria carry bacteriophages encoding RinA homologue proteins. Characterization of several of these proteins demonstrated that control by RinA of the phage-mediated packaging and transfer of virulence factor is a conserved mechanism regulating horizontal gene transfer.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This is an accepted manuscript of an article published by Taylor & Francis in Eastern European Economics on July 2015, available online: http://dx.doi.org/10.1080/00128775.2015.1079139

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The final publication is available at Springer via http://dx.doi.org/10.1007/s10693-015-0230-1

Relevância:

10.00% 10.00%

Publicador:

Resumo:

UPNa. Instituto de Agrobiotecnología. Laboratorio de Biofilms Microbianos.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In this article, we offer a new way of exploring relationships between three different dimensions of a business operation, namely the stage of business development, the methods of creativity and the major cultural values. Although separately, each of these has gained enormous attention from the management research community, evidenced by a large volume of research studies, there have been not many studies that attempt to describe the logic that connect these three important aspects of a business; let alone empirical evidences that support any significant relationships among these variables. The paper also provides a data set and an empirical investigation on that data set, using a categorical data analysis, to conclude that examinations of these possible relationships are meaningful and possible for seemingly unquantifiable information. The results also show that the most significant category among all creativity methods employed in Vietnamese enterprises is the “creative disciplines” rule in the “entrepreneurial phase,” while in general creative disciplines have played a critical role in explaining the structure of our data sample, for both stages of development in our consideration.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The process of making replicas of heritage has traditionally been developed by public agencies, corporations and museums and is not commonly used in schools. Currently there are technologies that allow creating cheap replicas. The new 3D reconstruction software, based on photographs and low cost 3D printers allow to make replicas at a cost much lower than traditional. This article describes the process of creating replicas of the sculpture Goslar Warrior of artist Henry Moore, located in Santa Cruz de Tenerife. To make this process, first, a digital model have been created using Autodesk Recap 360, Autodesk 123D Catch and Autodesk Meshmixer MarkerBot MakerWare applications. Physical replication, has been reproduced in polylactic acid (PLA) by MakerBot Replicator 2 3D printer. In addition, a cost analysis using, in one hand, the printer mentioned, and in the other hand, 3D printing services both online and local, is included. Finally, there has been a specific action with 141 students and 12 high school teachers, who filled a questionnary about the use of sculptural replicas in education.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The geodynamic forces acting in the Earth's interior manifest themselves in a variety of ways. Volcanoes are amongst the most impressive examples in this respect, but like with an iceberg, they only represent the tip of a more extensive system hidden underground. This system consists of a source region where melt forms and accumulates, feeder connections in which magma is transported towards the surface, and different reservoirs where it is stored before it eventually erupts to form a volcano. A magma represents a mixture of melt and crystals. The latter can be extracted from the source region, or form anywhere along the path towards their final crystallization place. They will retain information of the overall plumbing system. The host rocks of an intrusion, in contrast, provide information at the emplacement level. They record the effects of thermal and mechanical forces imposed by the magma. For a better understanding of the system, both parts - magmatic and metamorphic petrology - have to be integrated. I will demonstrate in my thesis that information from both is complementary. It is an iterative process, using constraints from one field to better constrain the other. Reading the history of the host rocks is not always straightforward. This is shown in chapter two, where a model for the formation of clustered garnets observed in the contact aureole is proposed. Fragments of garnets, older than the intrusive rocks are overgrown by garnet crystallizing due to the reheating during emplacement of the adjacent pluton. The formation of the clusters is therefore not a single event as generally assumed but the result of a two-stage process, namely the alteration of the old grains and the overgrowth and amalgamation of new garnet rims. This makes an important difference when applying petrological methods such as thermobarometry, geochronology or grain size distributions. The thermal conditions in the aureole are a strong function of the emplacement style of the pluton. therefore it is necessary to understand the pluton before drawing conclusions about its aureole. A study investigating the intrusive rocks by means of field, geochemical, geochronologi- cal and structural methods is presented in chapter three. This provided important information about the assembly of the intrusion, but also new insights on the nature of large, homogeneous plutons and the structure of the plumbing system in general. The incremental nature of the emplacement of the Western Adamello tonalité is documented, and the existence of an intermediate reservoir beneath homogeneous plutons is proposed. In chapter four it is demonstrated that information extracted from the host rock provides further constraints on the emplacement process of the intrusion. The temperatures obtain by combining field observations with phase petrology modeling are used together with thermal models to constrain the magmatic activity in the immediate intrusion. Instead of using the thermal models to control the petrology result, the inverse is done. The model parameters were changed until a match with the aureole temperatures was obtained. It is shown, that only a few combinations give a positive match and that temperature estimates from the aureole can constrain the frequency of ancient magmatic systems. In the fifth chapter, the Anisotropy of Magnetic Susceptibility of intrusive rocks is compared to 3D tomography. The obtained signal is a function of the shape and distribution of ferromagnetic grains, and is often used to infer flow directions of magma. It turns out that the signal is dominated by the shape of the magnetic crystals, and where they form tight clusters, also by their distribution. This is in good agreement with the predictions made in the theoretical and experimental literature. In the sixth chapter arguments for partial melting of host rock carbonates are presented. While at first very surprising, this is to be expected when considering the prior results from the intrusive study and experiments from the literature. Partial melting is documented by compelling microstructures, geochemical and structural data. The necessary conditions are far from extreme and this process might be more frequent than previously thought. The carbonate melt is highly mobile and can move along grain boundaries, infiltrating other rocks and ultimately alter the existing mineral assemblage. Finally, a mineralogical curiosity is presented in chapter seven. The mineral assemblage magne§site and calcite is in apparent equilibrium. It is well known that these two carbonates are not stable together in the system Ca0-Mg0-Fe0-C02. Indeed, magnesite and calcite should react to dolomite during metamorphism. The presented explanation for this '"forbidden" assemblage is, that a calcite melt infiltrated the magnesite bearing rock along grain boundaries and caused the peculiar microstructure. This is supported by isotopie disequilibrium between calcite and magnesite. A further implication of partially molten carbonates is, that the host rock drastically looses its strength so that its physical properties may be comparable to the ones of the intrusive rocks. This contrasting behavior of the host rock may ease the emplacement of the intrusion. We see that the circle closes and the iterative process of better constraining the emplacement could start again. - La Terre est en perpétuel mouvement et les forces tectoniques associées à ces mouvements se manifestent sous différentes formes. Les volcans en sont l'un des exemples les plus impressionnants, mais comme les icebergs, les laves émises en surfaces ne représentent que la pointe d'un vaste système caché dans les profondeurs. Ce système est constitué d'une région source, région où la roche source fond et produit le magma ; ce magma peut s'accumuler dans cette région source ou être transporté à travers différents conduits dans des réservoirs où le magma est stocké. Ce magma peut cristalliser in situ et produire des roches plutoniques ou alors être émis en surface. Un magma représente un mélange entre un liquide et des cristaux. Ces cristaux peuvent être extraits de la source ou se former tout au long du chemin jusqu'à l'endroit final de cristallisation. L'étude de ces cristaux peut ainsi donner des informations sur l'ensemble du système magmatique. Au contraire, les roches encaissantes fournissent des informations sur le niveau d'emplacement de l'intrusion. En effet ces roches enregistrent les effets thermiques et mécaniques imposés par le magma. Pour une meilleure compréhension du système, les deux parties, magmatique et métamorphique, doivent être intégrées. Cette thèse a pour but de montrer que les informations issues de l'étude des roches magmatiques et des roches encaissantes sont complémentaires. C'est un processus itératif qui utilise les contraintes d'un domaine pour améliorer la compréhension de l'autre. Comprendre l'histoire des roches encaissantes n'est pas toujours aisé. Ceci est démontré dans le chapitre deux, où un modèle de formation des grenats observés sous forme d'agrégats dans l'auréole de contact est proposé. Des fragments de grenats plus vieux que les roches intru- sives montrent une zone de surcroissance générée par l'apport thermique produit par la mise en place du pluton adjacent. La formation des agrégats de grenats n'est donc pas le résultat d'un seul événement, comme on le décrit habituellement, mais d'un processus en deux phases, soit l'altération de vieux grains engendrant une fracturation de ces grenats, puis la formation de zone de surcroissance autour de ces différents fragments expliquant la texture en agrégats observée. Cette interprétation en deux phases est importante, car elle engendre des différences notables lorsque l'on applique des méthodes pétrologiques comme la thermobarométrie, la géochronologie ou encore lorsque l'on étudie la distribution relative de la taille des grains. Les conditions thermales dans l'auréole de contact dépendent fortement du mode d'emplacement de l'intrusion et c'est pourquoi il est nécessaire de d'abord comprendre le pluton avant de faire des conclusions sur son auréole de contact. Une étude de terrain des roches intrusives ainsi qu'une étude géochimique, géochronologique et structurale est présente dans le troisième chapitre. Cette étude apporte des informations importantes sur la formation de l'intrusion mais également de nouvelles connaissances sur la nature de grands plutons homogènes et la structure de système magmatique en général. L'emplacement incrémental est mis en évidence et l'existence d'un réservoir intermédiaire en-dessous des plutons homogènes est proposé. Le quatrième chapitre de cette thèse illustre comment utiliser l'information extraite des roches encaissantes pour expliquer la mise en place de l'intrusion. Les températures obtenues par la combinaison des observations de terrain et l'assemblage métamorphique sont utilisées avec des modèles thermiques pour contraindre l'activité magmatique au contact directe de cette auréole. Au lieu d'utiliser le modèle thermique pour vérifier le résultat pétrologique, une approche inverse a été choisie. Les paramètres du modèle ont été changés jusqu'à ce qu'on obtienne une correspondance avec les températures observées dans l'auréole de contact. Ceci montre qu'il y a peu de combinaison qui peuvent expliquer les températures et qu'on peut contraindre la fréquence de l'activité magmatique d'un ancien système magmatique de cette manière. Dans le cinquième chapitre, les processus contrôlant l'anisotropie de la susceptibilité magnétique des roches intrusives sont expliqués à l'aide d'images de la distribution des minéraux dans les roches obtenues par tomographie 3D. Le signal associé à l'anisotropie de la susceptibilité magnétique est une fonction de la forme et de la distribution des grains ferromagnétiques. Ce signal est fréquemment utilisé pour déterminer la direction de mouvement d'un magma. En accord avec d'autres études de la littérature, les résultats montrent que le signal est dominé par la forme des cristaux magnétiques, ainsi que par la distribution des agglomérats de ces minéraux dans la roche. Dans le sixième chapitre, une étude associée à la fusion partielle de carbonates dans les roches encaissantes est présentée. Si la présence de liquides carbonatés dans les auréoles de contact a été proposée sur la base d'expériences de laboratoire, notre étude démontre clairement leur existence dans la nature. La fusion partielle est documentée par des microstructures caractéristiques pour la présence de liquides ainsi que par des données géochimiques et structurales. Les conditions nécessaires sont loin d'être extrêmes et ce processus pourrait être plus fréquent qu'attendu. Les liquides carbonatés sont très mobiles et peuvent circuler le long des limites de grain avant d'infiltrer d'autres roches en produisant une modification de leurs assemblages minéralogiques. Finalement, une curiosité minéralogique est présentée dans le chapitre sept. L'assemblage de minéraux de magnésite et de calcite en équilibre apparent est observé. Il est bien connu que ces deux carbonates ne sont pas stables ensemble dans le système CaO-MgO-FeO-CO.,. En effet, la magnésite et la calcite devraient réagir et produire de la dolomite pendant le métamorphisme. L'explication présentée pour cet assemblage à priori « interdit » est que un liquide carbonaté provenant des roches adjacentes infiltre cette roche et est responsable pour cette microstructure. Une autre implication associée à la présence de carbonates fondus est que la roche encaissante montre une diminution drastique de sa résistance et que les propriétés physiques de cette roche deviennent comparables à celles de la roche intrusive. Cette modification des propriétés rhéologiques des roches encaissantes peut faciliter la mise en place des roches intrusives. Ces différentes études démontrent bien le processus itératif utilisé et l'intérêt d'étudier aussi bien les roches intrusives que les roches encaissantes pour la compréhension des mécanismes de mise en place des magmas au sein de la croûte terrestre.