Remote sensing of ocean waves by polarimetric SAR

A new method to measure ocean wave slope spectra using fully polarimetric synthetic aperture radar (POLSAR) data was developed without the need for a complex hydrodynamic modulation transform function. There is no explicit use of a hydrodynamic modulation transfer function. This function is not clearly known and is based on hydrodynamic assumptions. The method is different from those developed by Schuler and colleagues or Pottier but complements their methods. The results estimated from NASA Jet Propulsion Laboratory (JPL) Airborne Synthetic Aperture Radar (AIRSAR) C-band polarimetric SAR data show that the ocean wavelength, wave direction, and significant wave height are in agreement with buoy measurements. The proposed method can be employed by future satellite missions such as RADARSAT-2.

Wind-vector estimation for RADARSAT-1 SAR images: Validation of wind-direction estimates based upon geometry diversity

In this letter, a new wind-vector algorithm is presented that uses radar backscatter sigma(0) measurements at two adjacent subscenes of RADARSAT-1 synthetic aperture radar (SAR) images, with each subscene having slightly different geometry. Resultant wind vectors are validated using in situ buoy measurements and compared with wind vectors determined from a hybrid wind-retrieval model using wind directions determined by spectral analysis of wind-induced image streaks and observed by colocated QuikSCAT measurements. The hybrid wind-retrieval model consists of CMOD-IFR2 [applicable to C-band vertical-vertical (W) polarization] and a C-band copolarization ratio according to Kirchhoff scattering. The new algorithm displays improved skill in wind-vector estimation for RADARSAT-1 SAR data when compared to conventional wind-retrieval methodology. In addition, unlike conventional methods, the present method is applicable to RADARSAT-1 images both with and without visible streaks. However, this method requires ancillary data such as buoy measurements to resolve the ambiguity in retrieved wind direction.

Hybrid integration and packaging of grating-coupled silicon photonics

This thesis covers both the packaging of silicon photonic devices with fiber inputs and outputs as well as the integration of laser light sources with these same devices. The principal challenge in both of these pursuits is coupling light into the submicrometer waveguides that are the hallmark of silicon-on-insulator (SOI) systems. Previous work on grating couplers is leveraged to design new approaches to bridge the gap between the highly-integrated domain of silicon, the Interconnected world of fiber and the active region of III-V materials. First, a novel process for the planar packaging of grating couplers with fibers is explored in detail. This technology allows the creation of easy-to-use test platforms for laser integration and also stands on its own merits as an enabling technology for next-generation silicon photonics systems. The alignment tolerances of this process are shown to be well-suited to a passive alignment process and for wafer-scale assembly. Furthermore, this technology has already been used to package demonstrators for research partners and is included in the offerings of the ePIXfab silicon photonics foundry and as a design kit for PhoeniX Software’s MaskEngineer product. After this, a process for hybridly integrating a discrete edge-emitting laser with a silicon photonic circuit using near-vertical coupling is developed and characterized. The details of the various steps of the design process are given, including mechanical, thermal, optical and electrical steps. The interrelation of these design domains is also discussed. The construction process for a demonstrator is outlined, and measurements are presented of a series of single-wavelength Fabry-Pérot lasers along with a two-section laser tunable in the telecommunications C-band. The suitability and potential of this technology for mass manufacture is demonstrated, with further opportunities for improvement detailed and discussed in the conclusion.

Optical follow-up of GRB 970508

We report on the results of optical follow-up observations of the counterpart of the gamma-ray burst GRB 970508, starting 7 hr after the event. Multicolor U-, B-, V-, R-c-, and I-c-band observations were obtained during the first three consecutive nights. The counterpart was monitored regularly in R-c, until similar to 4 months after the burst. The light curve after the maximum follows a decline that can be fitted with a power law with exponent alpha = -1.141 +/- 0.014. Deviations from a smooth power-law decay are moderate (rms = 0.15 mag). We find no flattening of the light curve at late times. The optical afterglow fluence is a significant fraction, similar to 5%, of the GRB fluence. The optical energy distribution can be well represented by a power law, the slope of which changed at the time of the maximum (the spectrum became redder).

Common variants at the MHC locus and at chromosome 16q24.1 predispose to Barrett's esophagus

Barrett's esophagus is an increasingly common disease that is strongly associated with reflux of stomach acid and usually a hiatus hernia, and it strongly predisposes to esophageal adenocarcinoma (EAC), a tumor with a very poor prognosis. We report the first genome-wide association study on Barrett's esophagus, comprising 1,852 UK cases and 5,172 UK controls in the discovery stage and 5,986 cases and 12,825 controls in the replication stage. Variants at two loci were associated with disease risk: chromosome 6p21, rs9257809 (P(combined) = 4.09 × 10(-9); odds ratio (OR) = 1.21, 95% confidence interval (CI) =1.13-1.28), within the major histocompatibility complex locus, and chromosome 16q24, rs9936833 (P(combined) = 2.74 × 10(-10); OR = 1.14, 95% CI = 1.10-1.19), for which the closest protein-coding gene is FOXF1, which is implicated in esophageal development and structure. We found evidence that many common variants of small effect contribute to genetic susceptibility to Barrett's esophagus and that SNP alleles predisposing to obesity also increase risk for Barrett's esophagus.

The New Testament of Our Lord and Saviour Jesus Christ

This book was presented by the Canadian Bible Society (British & Foreign Bible Society) to the Canadian Soldiers in the war of 1914. There is an inscription which reads "Niagara-on-the-Lake, August 15th 1915 Presented to the 35th overseas Battalion Draft. P.C. Band to his father before his departure for the front". The word "confirmed" is written below this but the rest of the page is torn out. There is also a book plate that reads "Presented by the Canadian Bible Society (British & Foreign Bible Society) to the Canadian Soldiers in the War of 1914. 'Be strong and of a Good Courage'". See the full text in the Brock University Special Collections and Archives.

St. George's Parish Church, St. Catharines. Jubilee Celebration and Historic and Centenary Review

Inside the front cover H.K. Woodruff has signed the book and there is a label with the name , Mrs. Percy C. Band of Toronto, Ontario. The book contains some images and also has a list of matrimonial records from the St. Marks Church Register.

Brass Name Plates

Two engraved brass plates. The first plate is engraved with "Mr. and Mrs. Percy Carruthers Band, Hewlett, Long Island". The second plate is engraved with "Mr. and Mrs. Percy C. Band send best wishes for Christmas and the New Year".

Metal Stamp - Woodruff Coat of Arms

Square metal stamp, 2 1/2 cm x 6 1/2 cm, with the words "P.C. Band, Toronto, Ontario" engraved on it. The bar is 1 cm thick.

ATO Fraternity Pin

An ATO fraternity pin which belonged to P.C. Band

Clippings - Births, Deaths, Engagements

Clipping of a birth announcement of a daughter to Mr. and Mrs. P.C. Band, 1924. Clipping of a birth announcement of a son to Mr. and Mrs. Percy C. Band, September 11, 1927. Clipping of the obituary of Mrs. Annie Leslie Woodruff, widow of Welland Woodruff, 1934. Clipping of the announcement of the funeral of Mrs. Annie Leslie Woodruff, February 3, 1934. Clipping of the write-up of the funeral of Mrs. Annie Leslie Woodruff, 1934. Clipping of the obituary of Mr. B. Harvey Foster, n.d. Clipping of the funeral of Mr. Bernard H. Foster in Sheffield, England, n.d. Clipping of the obituary of Mrs. Mary Lanman Douw Ferris, widow of Morris Patterson Ferris, n.d. Clipping of the engagement announcement of Margaret Julia Woodruff to Captain Percy Carruthers Band, n.d.

Announcement of Birth of Margaret Elizabeth

Announcement of the birth of Margaret Elizabeth by Mr. and Mrs. P.C. Band, Toronto, June 6, 1924.

Clippings - Births, Deaths, Marriage

Clipping of the obituary of Mrs. Mary Lanman Douw Ferris, widow of Morris Patterson Ferris, n.d. Clipping of the obituary of Alfred Sanderson Woodruff, March 20, 1926. Clipping describing the wedding of Margaret Julia Woodruff and Captain Percy Carruthers Band, n.d. Clipping of a birth announcement of a daughter to Mr. and Mrs. P.C. Band, 1924. Clipping of a birth announcement of a son to Mr. and Mrs. Percy C. Band, Sept. 11, 1927.

Effect of Different Forms of Poly o-Toluidine /Poly Vinyl Chloride Composites on Dielectric Propertiesin the Microwave Field

In this paper we report the preparation and dielectric properties of poly o-toluidine:poly vinyl chloride composites in pellet and film forms. The composites were prepared using ammonium persulfate initiator and HCl dopant. The characterization is done by TGA and DSC. The dielectric properties including dielectric loss, conductivity, dielectric constant, dielectric heating coefficient, absorption coefficient, and penetration depth were studied in the microwave field. An HP8510 vector network analyzer with rectangular cavity resonator was used for the study. Sbands (2-4 GHz), C band (5-8 GHz), and X band (8-12 GHz) frequencies were used in the microwave field. Comparisons between the pellet and film forms of composites were also included. The result shows that the dielectric properties in the microwave field are dependent on the frequency and on the method of preparation.

Sensitivity of radar backscatter to desert surface roughness

Synthetic aperture radar (SAR) data have proved useful in remote sensing studies of deserts, enabling different surfaces to be discriminated by differences in roughness properties. Roughness is characterized in SAR backscatter models using the standard deviation of surface heights (sigma), correlation length (L) and autocorrelation function (rho(xi)). Previous research has suggested that these parameters are of limited use for characterizing surface roughness, and are often unreliable due to the collection of too few roughness profiles, or under-sampling in terms of resolution or profile length (L-p). This paper reports on work aimed at establishing the effects of L-p and sampling resolution on SAR backscatter estimations and site discrimination. Results indicate significant relationships between the average roughness parameters and L-p, but large variability in roughness parameters prevents any clear understanding of these relationships. Integral equation model simulations demonstrate limited change with L-p and under-estimate backscatter relative to SAR observations. However, modelled and observed backscatter conform in pattern and magnitude for C-band systems but not for L-band data. Variation in surface roughness alone does not explain variability in site discrimination. Other factors (possibly sub-surface scattering) appear to play a significant role in controlling backscatter characteristics at lower frequencies.