Heat losses and thermal performance of commercial combined solar and pellet heating systems

Various pellet heating systems are marketed in Sweden, some of them in combination with a solar heating system. Several types of pellet heating units are available and can be used for a combined system. This article compares four typical combined solar and pellet heating systems: System 1 and 2 two with a pellet stove, system 3 with a store integrated pellet burner and system 4 with a pellet boiler. The lower efficiency of pellet heaters compared to oil or gas heaters increases the primary energy demand. Consequently heat losses of the various systems have been studied. The systems have been modeled in TRNSYS and simulated with parameters identified from measurements. For almost all systems the flue gas losses are the main heat losses except for system 3 where store heat losses prevail. Relevant are also the heat losses of the burner and the boiler to the ambient. Significant leakage losses are noticed for system 3 and 4. For buildings with an open internal design system 1 is the most efficient solution. Other buildings should preferably apply system 3. The right choice of the system depends also on whether the heater is placed inside or outside of the heated are. A large potential for system optimization exist for all studied systems, which when applied could alter the relative merits of the different system types.

Tangibilidade, classe de ativos e estrutura de capital das empresas listadas na BM&FBOVESPA

This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts

Fístula oronasal em cão: reparo com flape simples associado a fator proteíco angiogênico purificado do látex de seringueira, veiculado com matriz de esponja de colágeno : estudo experimental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Nanomechanics to drive stem cells in injured tissues: insights from current research and future perspectives

Stem cells reside within tissue, ensuring its natural ability to repair an injury. They are involved in the natural repair of damaged tissue, which encompasses a complex process requiring the modulation of cell survival, extracellular matrix turnover, angiogenesis, and reverse remodeling. To date, the real reparative potential of each tissue is underestimated and noncommittal. The assessment of the biophysical properties of the extracellular environment is an innovative approach to better understand mechanisms underlying stem cell function, and consequently to develop safe and effective therapeutic strategies replacing the loss of tissue. Recent studies have focused on the role played by biomechanical signals that drive stem cell death, differentiation, and paracrinicity in a genetic and/or an epigenetic manner. Mechanical stimuli acting on the shape can influence the biochemistry and gene expression of resident stem cells and, therefore, the magnitude of biological responses that promote the healing of injured tissue. Nanotechnologies have proven to be a revolutionary tool capable of dissecting the cellular mechanosensing apparatus, allowing the intercellular cross-talk to be decoded and enabling the reparative potential of tissue to be enhanced without manipulation of stem cells. This review highlights the most relevant findings of stem cell mechanobiology and presents a fascinating perspective in regenerative medicine.

Evaluation of HA-fibrin-based hydrogel for restoration of degenerated intervertebral disc

Introduction: Intervertebral disc degeneration is associated with loss of nucleus pulposus (NP) tissue and reduced disc height[1]. A number of therapies, including synthetic and natural biomaterials, have been developed to restore full disc function and to minimize the pain and disability caused by this disease. Fibrin-based biomaterials are used as a replacement for NP or as a cell carrier for tissue engineering approaches[2]. While the behavior of such gels is well-characterized from a material point of view, little is known about their contribution to intervertebral disc (IVD) restoration under dynamic loads. The aim of the present study is the evaluation of a hyaluronic acid fibrin-based hydrogel (ProCore) used to repair an in vitro model of disc degeneration under dynamic loading. Methods: In vitro model of disc degeneration was induced in intact coccygeal bovine IVD by papain digestion of the NP as previously described[3]. In order to characterize fibrin hydrogels, four experimental groups were considered: 1) intact IVD (control), 2) IVD injected with PBS, 3) injection of hydrogels in degenerative IVD and 4) injection of hydrogels in combination with human bone marrow-derived mesenchymal stem cells (MSC) in degenerative IVD. All of the groups were subjected to dynamic loading protocols consisting of 0.2MPa static compression superimposed with ±2° torsion at 0.2Hz for 8h per day and maintained for 7 days. Additionally, one group consisted of degenerative IVD injected with hydrogel and subjected to static compression. Disc heights were monitored after the duration of the loading and compared to the initial disc height. The macrostructure of the formed tissue and the cellular distribution was evaluated by histological means. Results: After one week of loading, the degenerative IVD filled with hydrogel in combination with MSC (dynamic load), hydrogels (dynamic load) and hydrogels (static load) showed a reduction in height by 30%, 15% and 20%, respectively, as compared to their initial disc height. Histological sections showed that the HA-fibrin gel fully occupied the nucleotomized region of the disc and that fibrin was effective in filling the discontinuities of the cavity region. Furthermore, the cells were homogenously distributed along the fibrin hydrogels after 7 days of loading. Discussion: In this study, we showed that fibrin hydrogels showed a good integration within the papain-induced model of disc degeneration and can withstand the applied loads. Fibrin hydrogels can contribute to disc restoration by possibly maintaining adequate stiffness of the tissue and thus preventing disorganization of the surrounding IVD. References: 1. Jarman, J.P., Arpinar, V.E., Baruah, D., Klein, A.P., Maiman, D.J., and Tugan Muftuler, L. (2014). Intervertebral disc height loss demonstrates the threshold of major pathological changes during degeneration. Eur Spine J . 2. Colombini, A., Ceriani, C., Banfi, G., Brayda-Bruno, M., and Moretti, M. (2014). Fibrin in intervertebral disc tissue engineering. Tissue Eng Part B Rev . 3. Chan, S.C., Bürki, A., Bonél, H.M., Benneker, L.M., and Gantenbein-Ritter, B. (2013). Papain-induced in vitro disc degeneration model for the study of injectable nucleus pulposus therapy. Spine J 13, 273-283. Acknowledgement We thank the Swiss National Science Foundation SNF #310030_153411 for funding.

A user-focused integrated system for sustainable refurbishment.

Nowadays, it is urgent to renovate a great number of residential buildings. The necessity of improving energy efficiency must also be considered as an opportunity to improve indoor comfort. To achieve this goal, it is essential to develop tools to be used in the decision-making process, aiming to refurbish buildings in an integrated, efficient and sustainable way. The integrated system developed is based on a set of indicators. Sustainability indicators are useful to synthesize and organize complex information. They can provide data to evaluate a process in different stages: evaluation, diagnosis, comparison and tracing. The set of proposed indicators aims to accomplish the holistic approach pursued by sustainable development. So, these indicators are divided into three groups: environmental, social and economic. However, the main innovation of the system of indicators is the social ones. The sustainable refurbishment system aims to be a user-focused one. Therefore, the starting point is the needs of the user and social indicators are developed around this. The system tackles the sustainable refurbishment of buildings beyond energy problems. It proposes incorporating users in the decision-making process involving them in the refurbishment and so, contributing to the success of the renovation. In order to achieve this target, three social indicators are used, divided into 10 sub-indicators, and a ?Questionnaire about Sustainable Refurbishment? is drawn up. This research has been carried out in the framework of ?Sustainable Refurbishment? Research and Development Project, an integrated project under the supervision of the Centro para el Desarrollo Tecnológico e Industrial (CDTI) from the Spanish Government, in which University and the Construction Industry collaborate. This research project aims to develop an integrated system for the retrofitting of existing buildings to improve their energy efficiency. Accordingly, an additional objective of the project is to improve quality of life of residents.

Flexibilidad Polivalencia: modelos de libertad para la vivienda social en España

Este trabajo estudia la validez de la flexibilidad y la polivalencia, en tanto que estrategias de diseño doméstico, para superar los problemas derivados de la coincidencia de dos circunstancias opuestas en el campo de la vivienda social. Por un lado, la existencia en España de un rígido conjunto de normativas de diseño, originado a mediados del siglo pasado bajo unos supuestos culturales e ideológicos distintos a los actuales, que fija una idea muy precisa de hogar. Por otro lado, la creciente variedad de modos de habitar derivada del progreso social, económico y tecnológico de las últimas décadas. La tesis presenta dos partes ligadas entre sí. La primera es una investigación bibliográfica en la que se analizan los diferentes conceptos asociados a la flexibilidad y la polivalencia manejados hasta hoy, se estudian las formas en las que estas estrategias se presentan a través de ejemplos, algunos de ellos muy poco conocidos, y se exponen las oportunidades y los obstáculos para su desarrollo en nuestro país. La segunda parte es una investigación experimental que incluye los estudios de evaluación de dos edificios madrileños de referencia, las viviendas flexibles de Aranguren y Gallegos en Carabanchel y las viviendas polivalentes de la Casa de las Flores, de Secundino Zuazo. En ellos se analizan las ventajas y desventajas de los distintos dispositivos flexibles y polivalentes existentes en dichas viviendas; cómo influyen en la organización de la vida doméstica; cuáles de sus características merecen ser implementadas en nuevos proyectos y bajo qué condiciones. La investigación revela que la flexibilidad ofrece ventajas funcionales objetivas, pero que su generalización en nuevas promociones de vivienda ocasionaría problemas de índole cultural. Por otro lado, la polivalencia es eficaz para dar cabida a nuevos modelos de convivencia, pero choca con las preferencias de los grupos familiares tradicionales. En ambos casos, se proponen soluciones para mejorar su eficacia. ABSTRACT The aim of this thesis is to assess the validity of flexibility and polyvalence as architectural responses to address some of the issues derived from two concurrent –yet opposing– circumstances in the field of Spanish social housing. On the one hand, the existence of a thick set of rules that strictly defines the form and use of the domestic space. These design norms were originated in the mid-20th century, according to an institutionalised idea of nuclear family and family home that does not match the current social trends in the country. On the other hand, the growing variety of lifestyles and family groups derived from the social, economic and technological progress of the last decades. The thesis is divided into two interrelated parts: The first one is a bibliographic research and an analysis of the diverse concepts attached to flexibility and polyvalence existing in the literature, a study of the ways in which these strategies are practiced in relevant housing buildings, and an explanation of the benefits and difficulties they pose with respect to their development in Spain. The second part is an experimental research including two post-occupancy evaluations in two housing buildings in Madrid: the flexible apartments in Carabanchel by Aranguren & Gallegos, and the polyvalent apartments in la Casa de las Flores by Secundino Zuazo. These studies are aimed at determining the extent to which the flexible and polyvalent elements in these projects are successful, which users take advantage of them and, over all, which of these features deserve to be applied to future developments, and under which conditions. The research indicates that, despite offering objective functional advantages, flexibility cannot be proposed as a general strategy in future subsidised housing developments due to the cultural problems it provokes. Besides, polyvalence is useful to host new cohabitations models, but it clashes with the preferences of traditional family groups. In both cases, several solutions to improve their efficiency are presented.

Modellazione strutturale di edifici storici in muratura e misti: valutazioni comparate e criteri operativi

L’obiettivo della presente tesi è evidenziare l’importanza dell’approccio critico alla valutazione della vulnerabilità sismica di edifici in muratura e misti Il contributo della tesi sottolinea i diversi risultati ottenuti nella modellazione di tre edifici esistenti ed uno ipotetico usando due diversi programmi basati sul modello del telaio equivalente. La modellazione delle diverse ipotesi di vincolamento ed estensione delle zone rigide ha richiesto la formulazione di quattro modelli di calcolo in Aedes PCM ed un modello in 3muri. I dati ottenuti sono stati confrontati, inoltre, con l’analisi semplificata speditiva per la valutazione della vulnerabilità a scala territoriale prevista nelle “Linee Guida per la valutazione e riduzione del rischio sismico del Patrimonio Culturale”. Si può notare che i valori ottenuti sono piuttosto diversi e che la variabilità aumenta nel caso di edifici non regolari, inoltre le evidenze legate ai danni realmente rilevati sugli edifici mostrano un profondo iato tra la previsione di danno ottenuta tramite calcolatore e le lesioni rilevate; questo costituisce un campanello d’allarme nei confronti di un approccio acritico nei confronti del mero dato numerico ed un richiamo all’importanza del processo conoscitivo. I casi di studio analizzati sono stati scelti in funzione delle caratteristiche seguenti: il primo è una struttura semplice e simmetrica nelle due direzioni che ha avuto la funzione di permettere di testare in modo controllato le ipotesi di base. Gli altri sono edifici reali: il Padiglione Morselli è un edificio in muratura a pianta a forma di C, regolare in pianta ed in elevazione solamente per quanto concerne la direzione y: questo ha permesso di raffrontare il diverso comportamento dei modelli di calcolo nelle sue direzioni; il liceo Marconi è un edificio misto in cui elementi in conglomerato cementizio armato affiancano le pareti portanti in muratura, che presenta un piano di copertura piuttosto irregolare; il Corpo 4 dell’Ospedale di Castelfranco Emilia è un edificio in muratura, a pianta regolare che presenta le medesime irregolarità nel piano sommitale del precedente. I dati ottenuti hanno dimostrato un buon accordo per la quantificazione dell’indice di sicurezza per i modelli regolari e semplici con uno scarto di circa il 30% mentre il delta si incrementa per le strutture irregolari, in particolare quando le pareti portanti in muratura vengono sostituite da elementi puntuali nei piani di copertura arrivando a valori massimi del 60%. I confronti sono stati estesi per le tre strutture anche alla modellazione proposta dalle Linee Guida per la valutazione dell’indice di sicurezza sismica a scala territoriale LV1 mostrando differenze nell’ordine del 30% per il Padiglione Morselli e del 50% per il Liceo Marconi; il metodo semplificato risulta correttamente cautelativo. È, quindi, possibile affermare che tanto più gli edifici si mostrano regolari in riferimento a masse e rigidezze, tanto più la modellazione a telaio equivalente restituisce valori in accordo tra i programmi e di più immediata comprensione. Questa evidenza può essere estesa ad altri casi reali divenendo un vero e proprio criterio operativo che consiglia la suddivisione degli edifici esistenti in muratura, solitamente molto complessi poiché frutto di successive stratificazioni, in parti più semplici, ricorrendo alle informazioni acquisite attraverso il percorso della conoscenza che diviene in questo modo uno strumento utile e vitale. La complessità dell’edificato storico deve necessariamente essere approcciata in una maniera più semplice identificando sub unità regolari per percorso dei carichi, epoca e tecnologia costruttiva e comportamento strutturale dimostrato nel corso del tempo che siano più semplici da studiare. Una chiara comprensione del comportamento delle strutture permette di agire mediante interventi puntuali e meno invasivi, rispettosi dell’esistente riconducendo, ancora una volta, l’intervento di consolidamento ai principi propri del restauro che includono i principi di minimo intervento, di riconoscibilità dello stesso, di rispetto dei materiali esistenti e l’uso di nuovi compatibili con i precedenti. Il percorso della conoscenza diviene in questo modo la chiave per liberare la complessità degli edifici storici esistenti trasformando un mero tecnicismo in una concreta operazione culturale . Il presente percorso di dottorato è stato svolto in collaborazione tra l’Università di Parma, DICATeA e lo Studio di Ingegneria Melegari mediante un percorso di Apprendistato in Alta Formazione e Ricerca.

Tangibilidade, classe de ativos e estrutura de capital das empresas listadas na BM&FBOVESPA

This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts

Iliohypogastric neurectomy in the prevention of postoperative pain following inguinal hernioplasty

Chronic postoperative pain is a common complication of inguinal hernia repair. An important Danish study revealed that 28.7% of patients undergoing hernioplasty suffered a varying degree of chronic pain, severe enough to interfere with normal daily activities in 11% of cases. The difficulty in treating this complication has led numerous surgeons to complete the surgical procedure ilioinguinal or iliohypogastric neurectomy. This method is proving effective in preventing the onset of chronic postoperative pain. We report the results obtained in patients undergoing neurectomy of the iliohypogastric nerve during anterior inguinal hernioplasty.

Tangibilidade, classe de ativos e estrutura de capital das empresas listadas na BM&FBOVESPA

This study aims to investigate the influence of the asset class and the breakdown of tangibility as determinant factors of the capital structure of companies listed on the BM & FBOVESPA in the period of 2008-2012. Two current assets classes were composed and once they were grouped by liquidity, they were also analyzed by the financial institutions for credit granting: current resources (Cash, Bank and Financial Applications) and operations with duplicates (Stocks and Receivables). The breakdown of the tangible assets was made based on its main components provided as warrantees for loans like Machinery & Equipment and Land & Buildings. For an analysis extension, three metrics for leverage (accounting, financial and market) were applied and the sample was divided into economic sectors, adopted by BM&FBOVESPA. The data model in dynamic panel estimated by a systemic GMM of two levels was used in this study due its strength to problems of endogenous relationship as well as the omitted variables bias. The found results suggest that current resources are determinants of the capital structure possibly because they re characterized as proxies for financial solvency, being its relationship with debt positive. The sectorial analysis confirmed the results for current resources. The tangibility of assets has inverse proportional relationship with the leverage. As it is disintegrated in its main components, the significant and negative influence of machinery & equipment was more marked in the Industrial Goods sector. This result shows that, on average, the most specific assets from operating activities of a company compete for a less use of third party resources. As complementary results, it was observed that the leverage has persistence, which is linked with the static trade-off theory. Specifically for financial leverage, it was observed that the persistence is relevant when it is controlled for the lagged current assets classes variables. The proxy variable for growth opportunities, measured by the Market -to -Book, has the sign of its contradictory coefficient. The company size has a positive relationship with debt, in favor of static trade-off theory. Profitability is the most consistent variable in all the performed estimations, showing strong negative and significant relationship with leverage, as the pecking order theory predicts

Projectar com o lugar

Dissertação para obtenção do grau de Mestre em Arquitcetura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Fractured Orbital Wall Reconstruction With an Auricular Cartilage Graft or Absorbable Polyacid Copolymer

Objective: The objective of the study was to compare the functional and aesthetic results of fractured orbital wall reconstruction with an auricular cartilage graft or absorbable polyacid copolymer. Materials and Methods: Twenty patients with blow-out orbital fracture/orbital floor associated or not with the medial wall were assessed by the same craniofacial surgical group. All were evaluated preoperatively and postoperatively by an ophthalmologist for diplopia, enophthalmos, exophthalmos, sensitivity, ophthalmic reflexes, intraocular pressure, and visual field. The patients were subjected to a preoperative facial multislice computed tomographic scan, repeated 6 months after surgery. Eight patients underwent reconstruction with an auricular cartilage graft, and 12 patients, with blade absorbable polyacid copolymer. Subtarsal access was used for all patients. Results: Two patients showed temporary ectropion, 1 in each group. All patients presented satisfactory ocular function, and all tests revealed good orbital delineation, orbital symmetry, periorbital sinus individualization, and reduction of blow-out. Conclusions: The blow-out orbital wall reconstruction can be performed with the use of an auricular cartilage or with a blade absorbable copolymer without differences regarding functional or aesthetic complications and sequelae.

The role of temporary accommodation buildings for post-disaster housing reconstruction

The number of houses damaged or destroyed after disasters is frequently large, and re-housing of homeless people is one of the most important tasks of reconstruction programmes. Reconstruction works often last long and during that time, it is essential to provide victims with the minimum conditions to live with dignity, privacy, and protection. This research intends to demonstrate the crucial role of temporary accommodation buildings to provide spaces where people can live and gradually resume their life until they have a permanent house. The study also aims to identify the main problems of temporary accommodation strategies and to discuss some principles and guidelines in order to reach better design solutions. It is found that temporary accommodation is an issue that goes beyond the simple provision of buildings, since the whole space for temporary settlement is important. Likewise, temporary accommodation is a process that should start before a disaster occurs, as a preventive pre-planning. In spite of being temporary constructions, these housing buildings are one of the most important elements to provide in emergency scenarios, contributing for better recovery and reconstruction actions.